Gebruiksaanwijzing /service van het product SM-nXm-AV-LCD van de fabrikant Network Technologies
Ga naar pagina of 19
SM-nXm-AV-LCD Audio/Video Matrix Switch Installation and Operation Manual MAN063 Rev 10/1/03 NTI NETWORK TECHNOLOGI ES INCORPORATE D Te l:33 0-5 62 -70 70 Fax :33 0-5 6 2-1 999 1275 D an ner D r Aurora, OH 44202 www.
WARRANTY INFORMATION The warranty period on this produ ct (parts and labor) is one (1) year from the date of purchase. Please contact Network Technologies Inc at (800) RGB-TECH (800 -742- 8324) or (330) 562-7070 for inform ation regarding repairs and/or returns.
Table of Contents Introduc tion ........................................................................................................................................................................................ 1 Specific ati ons ...............
1 Introduction The SM-nXm-AV-LCD Audio/Video Matrix s witch (VEEMUX-A) allows up to 32 audio/video sources (n) to be connecte d to up to 16 destinations (m). Different desti nations can even be con nected to the same source. Video resolution up to 1920x1200@85Hz is supported with no degradatio n – guaran teed.
2 Ordering Information The SM-nXm-AV-LCD Audio/Video Matrix s witch (VEEMUX-A) can be ordered in many sizes and with several control options . The base unit includes a user k eypad and an RS232 port to make up a c omplete system, with an option for an infrared control.
3 Features and Functions 1. LCD Display- for visual indication of conn ection between the user and a sp ecific CPU. 2. Keypad- buttons for user control over s witch functions 3. Audio IN- for connection of audio cables from audi o sources 4. Audio OUT- for connection of audio cables to a udio output devices (speakers) 5.
4 Installation 1. Turn OFF power to all video sources (inputs) that will be connected to the VEEMUX-A before connecti ng or disconnecting any cables. 2. For each video source, connect a VEXT-xx-MM cable from the video p ort of the source to a video input (VIDEO-1) of the VEEMUX-A (see Fig.
5 6. Connect a monitor to the por t labeled MONITOR 1 on t he rear of the VEEMUX-A (see Fig. 2). 7. Repeat step 6 for remaining monitors (outputs). 8. Connect audio output device (speakers) to port lab eled AUDIO OUT 1. 9. Repeat step 8 for remaining audio outp ut devices, connecting them to any remaini ng AUDIO OUT ports.
6 Front Panel Keypad Control The front panel keypad and LC D (drawing below) allo w the user to view and change current audio and vid eo connections, adjust audio volume and configur e the RS-232 control interf ace. The ke ypad buttons perform the following functions.
7 • Connecting v ideo only To make a video connection without changing the current audio connection, use any of the follo wing commands: 1. <OUT>, < ▲ >, Single digit output port number, <IN> or <ENTER>, Single digit input port number, <ENT ER>.
8 RS232 Control Remote Connection The RS232 Interface is designed to control the s witch via serial (RS232) daisy chain con nection from any host computer or other controller with an RS232 communications port.
9 Command Protocol Host controller commands supported by t he unit are defined belo w. All commands should be terminated with a <CR> (carriage return). When a command is sent, the entire string is echoed back to the host alon g with a response from the addressed unit as shown in the command definitio ns.
10 CB - Change Baud Rate For All Switches Format: CB 00,BR<CR> Successful Response: None Syntax or Transmission Error: ?<CR> Behavior: All switches on the serial bus will change their baud rat e to the new baud rate. 12 specifies 1200 baud, 24 specifies 2400 baud, 48 specifies 4800 bau d, 96 specifies 9600 baud.
11 RO - VIDEO Read Connection For Output/User Port Format: RO SW,OP<CR> Successful Response: *<CR> IP<CR> Syntax or Transmission Error: ?<CR> Behavior: This will find out which VIDEO input/CPU port is connected to the specified VIDEO output/us er port.
12 AV - Set Volume Level For Output/User Port Format: AV SW,OP,VV<CR> Successful Response: *<CR> Syntax or Transmission Error: ?<CR> Behavior: On switches that support AUDIO and supp.
13 6) Connect All Aud io Outputs/Users to an Input/CPU - connect all outputs to an input (Audio ports onl y) 7) Change Mut e Status for Audio Output/User - mute or un-mute the Audio port output 8) Cha.
14 1 23 45 67 8 9 10 11 12 13 14 15 16 17 18 19 20 12 34 5 6 78 9 10 11 12 13 14 15 16 IRT-20X16 LO BATT NT I ON OFF I N P U T S O U T P U T S 1. Move ON / OF F switch to the ON position. 2. Select one of the 16 output touch activated buttons. 3. Make sure red LED on the IR receiver is on before sele cting input.
15 DDC Support (Optional) DDC information allo ws the CPU to automatic ally select the optimal resolution for the monitor b y receiving, at power up, information from the monitor concerni ng its reso lution specifications.
16 Rack mounting Instructions This NTI switch was designed to be directly mounted to a ra ck. It includes a mounting fl ange to make attachment easy. Install 4 captive nuts to the rack in locations that line up with the holes (or slots) in the mounting flange on the NTI switch .
Een belangrijk punt na aankoop van elk apparaat Network Technologies SM-nXm-AV-LCD (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Network Technologies SM-nXm-AV-LCD heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Network Technologies SM-nXm-AV-LCD vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Network Technologies SM-nXm-AV-LCD leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Network Technologies SM-nXm-AV-LCD krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Network Technologies SM-nXm-AV-LCD bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Network Technologies SM-nXm-AV-LCD kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Network Technologies SM-nXm-AV-LCD . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
