Gebruiksaanwijzing /service van het product ST-xU van de fabrikant Network Technologies
Ga naar pagina of 42
MAN064 Rev Date11/10/2005 ST - x U Universal KVM Switch Installation and Operation Manual NODEMUX ® Series NETWORK TECHNOLOGI ES INCORPORATE D Te l:33 0-5 62 -70 70 Fax :33 0-5 6 2-1 999 1275 D an ner D r Aurora, OH 44202 www.
i MAN064 Rev Date11/10/2005 TRADEMARK NODEMUX is a registered tradema rk of Network Technologies Inc in the U.S. and other co untries COPYRIGHT Copyright © 2005 by Net work Technologies Inc.
ii MAN064 Rev Date11/10/2005 TABLE OF CONTENTS INTRODUCTION ................................................................................................................... ............................................................ 1 MATERIALS ..
iii MAN064 Rev Date11/10/2005 TABLE OF FIGURES Figure 1- Secure rackm ount ears to switch........................................................................................................................................ 4 Figure 2- Secure switch to rack .
NTI NODEMUX SERIES UNIVERSAL KVM SWITCH 1 INTRODUCTION The NTI ST - x U UNIVERSAL KVM switch (NODEMUX) allows the user’s ke yboard, monitor, and mouse to directl y control an y legacy PC, MAC, or SUN CPU connected to the switch (up to 32 CPUs as a single s witch or 152 CPUs when switches are cascaded).
NTI NODEMUX SERIES UNIVERSAL KVM SWITCH 2 MA TERIALS Materials Supplied: • NTI ST- x U UNIVERSAL KVM Switch • IEC Line cord, country specific • CD with a pdf file of this manual Materials Not Su.
NTI NODEMUX SERIES UNIVERSAL KVM SWITCH 3 FEATURES AND FUNCTIONS 1. Power ON/OFF sw itch 2. Mode LEDs- for visual indication of s witch mode status 3. CPU Status LEDs- for visual indication of connection bet ween the user and a specific CPU. 4. CPU Select Switches- push to manually switc h to a specific CP U 5.
NTI NODEMUX SERIES UNIVERSAL KVM SWITCH 4 RACKMOUNTING INSTRUCTIONS This NTI switch was designed to be mounted to a rack or to set on a desktop. It includes rackmount ears to make attachment to a rack easy, and rubber feet to be appl ied to the bottom of the case if it will instead sit on a flat surface.
NTI NODEMUX SERIES UNIVERSAL KVM SWITCH 5 INST ALLA TION 1. T urn OFF power to all CPUs that will be connected to t he NODEMU X befor e connecting or disconnectin g any cables to or from them. WARNING ! DAMAGE MAY OCCUR TO THE CPU IF POWER IS NOT DISCONNECTED BEF ORE CONNECTING OR DISCONNECTING C ABLES .
NTI NODEMUX SERIES UNIVERSAL KVM SWITCH 6 5. Connect the inp ut devices (keyboard/mous e) to the port lab el ed DEVICES on the rear of the NODEMUX follo wing one of the methods detailed below: • PS/2 keyboard and mou se - attach the 8-pin mal e end of a VKTINT-1 to the NODEMUX at the DEVICES port.
NTI NODEMUX SERIES UNIVERSAL KVM SWITCH 7 6. F o r each CPU: a. Connect the appropriate NTI ke yboard cable (see the char t bel ow) from the input devices port (keyboard/mouse) of the CPU to a CPU x port of the NODEMUX. Note the port’s number. (See Figs.
NTI NODEMUX SERIES UNIVERSAL KVM SWITCH 8 • SUN CPU- Connect a SUN CPU video p ort using a VEXT- xx -MM cable with a 13W3M-15HDF adapter between a VIDEO x port on the ST- x U and the CPU. Connect the SUN CPU keyboard/m ouse port using an SKT INT - xx -MM bet ween a CPU- x port on the ST- x U and the CPU.
NTI NODEMUX SERIES UNIVERSAL KVM SWITCH 9 7. For Units with Touch- screen support (-TSO option) a. Connect the 15HD cable from the user monitor to the MONITOR port on the NO DEMU X. b. Connect the 9D ser ial cable from the us er monitor to the SERIAL port on the NODEMUX.
NTI NODEMUX SERIES UNIVERSAL KVM SWITCH 10 CASCADING The NTI ST - x U Universal KVM switch can be expand ed to access up to 152 CPUs by cascading multiple units tog ether. Up to 8 SUN, MAC, or Universal switches can be connected into an ST - x U Universal KVM switch’s CPU ports, as shown in Fig.
NTI NODEMUX SERIES UNIVERSAL KVM SWITCH 11 NOTES: • Port 1 of the Master Unit with Slave Unit #1 connected to it will function and be controlled as ports 1-4 for an ST- 4U (1-8 for an ST-8U, etc.
NTI NODEMUX SERIES UNIVERSAL KVM SWITCH 12 Figure 15- Basic cascaded master-to-slave cable connections b. Connect Local CPUs to any remaini ng co nsecutive port s on the master as described under INST ALLAT ION on page 4.
NTI NODEMUX SERIES UNIVERSAL KVM SWITCH 13 OPERA TION Control over the CPUs attached to the NODEMU X is ach iev ed through operatio n of the NO DEMUX. Once the NODEMUX is properly connected, the NODEM.
NTI NODEMUX SERIES UNIVERSAL KVM SWITCH 14 Command Functions (Cont'd) Function: Key stroke : Toggle Scan Mode ON and OFF Toggle Broadcast Mode ON and OFF Sets scan time-out period for each port.
NTI NODEMUX SERIES UNIVERSAL KVM SWITCH 15 Scan Mode When in Scan Mode the switch scans to each port with a CP U powered-ON. (The SCAN LED on the front panel will illuminate and remain ON while in Scan Mode. ) The port with the CPU powered- ON remains active while in use.
NTI NODEMUX SERIES UNIVERSAL KVM SWITCH 16 When a standard u ser powers up the system a secu rit y screen may appear as setu p by the administrator. The user will need to login to the system by follo wing the instructions bel ow fo r the USER LOGIN.
NTI NODEMUX SERIES UNIVERSAL KVM SWITCH 17 Switch Configuration Switch Configuration enabl es the administrat or to config ure the NO DEMUX to be used as a stan d alo ne switch or as one of the switches in a cascaded system.
NTI NODEMUX SERIES UNIVERSAL KVM SWITCH 18 Note: After configuring an NODEMUX as a slave unit, when the power is cycled th e slave NODEMUX will only be controllable throu gh th e master NODEMUX it is connected to . Direct OSD menu control of th e slave u nit will no longer be possible.
NTI NODEMUX SERIES UNIVERSAL KVM SWITCH 19 User Name List The User Name List displays the l ist of users an d provi des c ontrol for adding new users, changing or assig ning user passwords, and changing access rights for any giv en user. User names may be up to 12 charact ers long, may not contain spaces, and are not case sensitive.
NTI NODEMUX SERIES UNIVERSAL KVM SWITCH 20 The On Screen Display menu will automatic ally appear on the mo nitor in additi on to il luminating the indicator LEDs on the KVM switch. This provides a visual way to control the NODEM UX using the keyb oard, monitor, and mouse.
NTI NODEMUX SERIES UNIVERSAL KVM SWITCH 21 Command Mode (Cont’d) Function: Keystroke: Sets scan time-out on each port Selects a specific port Selects the first port on the switch Selects the last port on the switch Enters Search Mode and adds a character to search string and selects the CPU’s name that matches best.
NTI NODEMUX SERIES UNIVERSAL KVM SWITCH 22 FYI: If switches are casc ad ed (such as that illustrated in Fig. 14 on page 10), it w ill be n ecessa r y to make note of which port each CPU is connected to on each sl ave KVM switch and which port each slav e KVM switch is connected to on the master KVM switch .
NTI NODEMUX SERIES UNIVERSAL KVM SWITCH 23 Selects the last port on the switch Toggles bet ween insert and overstrike Erase current character Erase previous character When finished making cha nges i n.
NTI NODEMUX SERIES UNIVERSAL KVM SWITCH 24 Maintenance Mode Maintenance Mode allo ws a user to customize the On Screen Display to their requirements Function: Key stroke: Reset all of the port names T.
NTI NODEMUX SERIES UNIVERSAL KVM SWITCH 25 Help Mode This mode displays a list of commands with a short explanation of their function. These lists are organize d in pag es for e ach mode (i.e. COMMAND, EDIT, SEARCH, and HELP). The following opt io ns al low the user to quickly obtain informatio n on an y command .
NTI NODEMUX SERIES UNIVERSAL KVM SWITCH 26 Reset Default Values The default operating valu es of the con nected touch screen monitor must be communicated to the NODEMUX befor e an y connected CPUs are powered up. To reset default values, 1. Press <Ctrl> + < ` > (accent key) to enter Command Mode 2.
NTI NODEMUX SERIES UNIVERSAL KVM SWITCH 27 RS232 CONTROL RS232 Connections and Configuration Remote Connection The RS232 Interface is designed to meet the RS232C stan dard an d can be controlle d from an y termin al (CPU or other controller with an RS232 communications port.
NTI NODEMUX SERIES UNIVERSAL KVM SWITCH 28 Unit Address and Loop Back To allow multiple units to be controlled from a sing le termi nal port, the RS232 control interface is designed to allo w "daisy chaining" up to 15 units. By setting the appropriate RS232 dip s witches, each unit ca n be given a uni que addr ess (1-15).
NTI NODEMUX SERIES UNIVERSAL KVM SWITCH 29 NODEMUX SWITCH CPU (te rmin al) RS23 2 First Un it RS232 RS2 32 Second U nit Last Unit RS232 Serial Port Matrix- Y-1 Matr i x- Y-1 Matr ix- Y-1 NODEMUX SWITC.
NTI NODEMUX SERIES UNIVERSAL KVM SWITCH 30 Figure 34- Pinout of Ma trix-Y-1 cable Command Protocol Terminal control commands supp ort ed b y the NO DEMUX are defined belo w. Notes: • All commands should be terminated with an <Enter> (ASCII 13) denoted by <CR>.
NTI NODEMUX SERIES UNIVERSAL KVM SWITCH 31 CA - change all output channels FORMAT: CA AA,XX<CR> CA = "change all outputs" command follo wed by at least one space AA = unit address XX =.
NTI NODEMUX SERIES UNIVERSAL KVM SWITCH 32 KEYBOARD-TO-CPU TRANSLA TION The NTI NODEMUX enab les the mixture of other wise incompat ible dev ices and CPUs to contr ol each other. It accomplishes this by performing keyboard-to-CPU tra nslati ons aut omatically (i.
NTI NODEMUX SERIES UNIVERSAL KVM SWITCH 33 Keyboard Replacement Should it be necessary to replac e the ke yboard of one platform wi th a keyboa rd of a differ ent platform, the dip-switches will n eed to be re-configured accordingly. To do this; 1. Power-down the ST- x U by following the proper po wer-down sequence.
NTI NODEMUX SERIES UNIVERSAL KVM SWITCH 34 For models ST- x U (no OSD): 1. Make sure the ST- x U is completely disconnected from a ll CPU components. Be sure to unplug the ST- x U from the electrical outlet. 2. Remove the two philips-head screws from the underside of the ST- x U and set the ST - x U on a firm and flat surface, bottom down (see Fig.
NTI NODEMUX SERIES UNIVERSAL KVM SWITCH 35 6. Carefully loosen the video board from t he standoffs. With it loosened, grasp firmly the video board and fro nt panel at the same time and slide the front panel up out of the slots in the plastic case that support it.
NTI NODEMUX SERIES UNIVERSAL KVM SWITCH 36 NOTE: Before proceedin g , it is important to discharge any static charge yo u may be carrying by touch ing any large metal object (away from the ST-xU-O). 4. Firmly grasp the front and rear panel an d slide the entire asse m bl y out of the lo wer case.
NTI NODEMUX SERIES UNIVERSAL KVM SWITCH 37 Configuring the Jumper Block Once the jumper block is exposed, apply a jumper across the appropriate pins to disable the desired mode(s) according to the chart below.
NTI NODEMUX SERIES UNIVERSAL KVM SWITCH 38 TROUBLESHOOTING PROBLEM: SOLUTION: Keyboard Errors Check cable connections on each CPU a nd the switch. NOTE: If the cable from a CPU’s keyboard port is disconnected from the NT I Universal KVM switch while power is ON, turn the power OFF to the CPU before plugging the cable back i n.
Een belangrijk punt na aankoop van elk apparaat Network Technologies ST-xU (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Network Technologies ST-xU heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Network Technologies ST-xU vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Network Technologies ST-xU leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Network Technologies ST-xU krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Network Technologies ST-xU bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Network Technologies ST-xU kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Network Technologies ST-xU . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
