Gebruiksaanwijzing /service van het product 14 van de fabrikant Nikon
Ga naar pagina of 28
Nikon Speedlight INSTRUcrION MANUAL.
NOMENCLATURE------------------------- Wide-Flash Adapter SW-5 ® Flash head ® Shooting mode selector 8) Sensor Unit SU - 2 ® Sensor socket ® Sync / multiple flash sockets o Sync Cord SC - ll ® B r acket mounting adapter ® Bracket mounting pin @) Trip .
f/stop indicators with wide-flash adapter (thin color-coded lines) @ f/stop II' IUl.calors f/stop scale @ Distance scale @ ASA/ISO film speed index @ Ready-light ® Bracket attachment dot @ Attac.
CONTENTS ---------- NOMENCLATURE . ... . .. .. . .. ..... ... . ... . ..... 2-3 FOREWORD .. . .... . . . . ....... . .. ..... ... . ... . .... 4 BASIC OPERATION . ... ........ ... . ... .... . . . .. S-9 CONTROLS IN DETAIL . .. .. . . . .. . ... .....
BASIC OPERATION ------------- . -- ) _ ~ <C':J~ - • • 1. Attach the bracket @ to the camera. Screw the bracket ' s attachment screw @ into the camera's tripod socket to secure the two units together tightly. (For details, refer to page 10.
- BASIC OPERATION -continued ---------- 4. Attach the sync cord 0 . Screw one end of the Sync Cord SC- 11 into either of the flash unit's sync! multiple flash socke ts ® and screw the other end into the camera's sync terminal. No te : Some cameras do not have the threaded sync terminal.
7. Set the camera's shutter speed for proper syn- chronization. Set the shutter speed dial to the prop- er synchronization speed for elec- tronic flash (e.g., set the F3 to the "X" setting). For details, refer to the chart on page 11. 8 Set the exposure calcu- -lator dial @ .
- BASIC OPERATION-continued ---------......; 9. Set the lens' aperture ring to an approprIate f / number. In the example, £/4 is selected. 8 10. Set the shooting mode selector Q) . Turn the ring on the front of the sen- sor unit until the white index is op- posite the color corresponding to that of the £/stop selected .
12. Watch the ready-light @. As soon - as the LED ready - light comes on, the flash unit is ready to fire. 13. Take the picture. When the shutter is tripped, the flash unit fires and the picture is taken. Soon, the ready-light will light up to tell you the flash unit is recycled and ready to fire again.
CONTROLS IN DETAIL - -- -- -- -- -- Nik on FE / FM 2IF M M oto r Dr i ve MD - llIM D- 1 2 IMD - 14 Bracket SK -5 @ Nik o n F3/ F 3 Hi g h - Ey e p o int / FG I EM / F2 , M o t or D rive MD - 2IM D- 3I.
Shutter Speed Dial To get proper synchronization, set the camera's shutter speed dial as shown in the chart be l ow. (For details, refer to your camera's instruction manua l.
-CONTROLS IN DETAIL-continued--------:----- Exposure calculator Dial @ The exposure calculator dial on the back of the SB-14 helps you to select the usable range of £/stops for the speed of the film in use and the flash-to - subject distance.
a subject more than 5.6m (18 ft.) away, the only usable flstop is fl4. On the other hand, the thin color - coded lines @ with "W" indicate the distance ranges when the wide - flash adapter is used: from 0 . 6m to 5.6m (2 to 18 ft.), 0.6m to 4m (2 to 13 ft.
-CONTROLS IN DETAIL-continued-------- For Manual Operation Set the ASAIISO dial and simply read off the flnumber Caution: For monual operation, be sure to set the shoaling made selec/or which appears directly above the flash - to-subject dis- of the Sensor Unit SU - 2 affhe " M " posilion .
Sensor Unit SU-2 8) The Sensor Unit SU-2 controls the operation of the SB-14. It has five settings to choose from. At the Three Auto Positions To shoot on Auto, lift up and turn the knurled ring on the outside of the sensor to one of the three positions (orange, yellow, or blue) which are color-coded for use with the exposure calculator dial.
-CONTROLS IN DETAIL-continued -------- Ready - Light @ Built into the back of the SB - l4's flash head is a ready- light which comes on as soon as the flash unit is recycled and ready to fire.
Open-Flash Button ® The red open - flash button is used to fire the flash unit manually without having to trip the camera's shutter. In this manner, you can create multiple-exposure "strobo- scopic" effects or paint the scene with light by firing the flash repeatedly with the camera set to "B .
-CONTROLS IN DETAIL-continued-------- Flash Head 0 The SB-14's movable flash head can be tilted back up to 120 0 and rotated 120 0 to the left and 120 0 to the right; click-stops are provided at 30 0 , 60 0 , 90 0 and 120 0 for both tilting and rotating movements.
Sync/Multiple Flash Sockets ® Two standard Nikon screw-type terminals are provided on the Speedlight SB-14. Either terminal can be used to connect the SB-14 to the camera, while the other is pro- vided for connecting the SB-14 with another flash unit in series for multiple flash operation.
-CONTROLS IN DETAIL -continued-------- Wide-Flash Adapter SW -5 CD The angle of illumination of the SB-14 by itself covers the picture angle of a 28mm wideangle lens.
TIPS ON AUTOMATIC FLASH SHOOTING ----- Subject's Reflectivity When you shoot a dark subject (one with low reflectivity), reduce the aperture selected by one-half to one full f/stop. When the subject is light in tone (has high reflectivity), reset the aperture so that it is one - half to one full f/stop wider.
ACCESSORIES -------------- DCUnitSD-7 Accepting six C - type batteries, the SD-7 is designed to be used as a power source for both the Nikon Speedlights SB - 14 and SB - ll .
TTL Senso r Cord SC-12 One meter long, this cord allows the SB - 14 to be used with the Nikon F3 or F3 High-Eyepoint camera for auto- matic through - the - lens control of the flash exposure. When attached, the camera's shutter speed is auto- matically switched to the proper flash synchronization speed of 1/80 sec.
'~EDEYEn -------------------------------- "Red eye ," an optical phenomenon in which a subject's eyes appear red in photographs taken with a flash unit, is a result of the flash light's directly illuminat- ing the retina . This happens when the subject looks straight into the camera on which a flash unit is mounted .
OPTIMUM BATTERY PERFORMANCE 1. New batteries: Between manufacturing and first use, all batteries exhibit some drain . Therefore, care should be taken to purchase the newest (and freshest) ones possible. To help you do this, some manufacturers stamp the date of manu- facture on the bottom of each battery.
SPECIFICATIONS ------------- Guide number (ASAIISO 100 and meters) 32 (22 with Wide-Flash Adapter SW-5) (ASA/ISO 25 and feet) 52 (36 with Wide-Flash Adapter SW -5) Angle of coverage Horizontal: 67° (.
27.
No reproduction in any form of this booklet , in whole or in part (except for brief quotation in critical articles or reviews). may be made without written authorization from the publisher .
Een belangrijk punt na aankoop van elk apparaat Nikon 14 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Nikon 14 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Nikon 14 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Nikon 14 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Nikon 14 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Nikon 14 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Nikon 14 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Nikon 14 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
