Gebruiksaanwijzing /service van het product SW10WM van de fabrikant Niles Audio
Ga naar pagina of 34
INST ALLA TION GUIDE SW 10JM SW 10WM FOR USE WITH NILES SW10JM JOIST MOUNT SUBWOOFER AND NILES SW10WM W ALL MOUNT SUBWOOFER.
Thank you for choosing Niles. This manual is for use with the Niles SW10JM Joist Mount Subwoofer or the Niles SW10WM Wall Mount Subwoofer . The SW10JM/SW10WM are custom- install passive subwoofers designed to blend seamlessly within a home’ s interior .
NILES AUDIO CORPORA TION – 1-800-BUY -HIFI or 1-305-238-4373 1 INTRODUCTION The Ni les SW10JM Joist Mount Subwoofer is de sig ned to fit di scr eet ly in cei lin g j ois ts or sub - floo rs. The Ni les SW10WM W all Mount Subwoofer is de sig ned to fit di scr eet ly i n w all s.
2 FEA TURES AND BENEFITS 10-INCH WOOFER WITH INJECTION MOLDED TCC™ (SW10JM ONL Y) The SW10JM features a 10” injection molded TCC (T alc, Carbon and Ceramic) cone and ported enclosure for maximum bass response.
NILES AUDIO CORPORA TION – 1-800-BUY -HIFI or 1-305-238-4373 3 QUALITY YOU CAN COUNT ON Since 1978, Niles Audio has been a leading manufacturer of custom-installed home entertainment products.
4 TOOLS NEEDED: • Pencil • Drywall Saw • Phillips Screwdriver • Drill (and assorted Bits) • Qty . 2; 2 x 4s (48” in length) • Wire strippers • T ape Measure • Level (Optional) • Aw.
NILES AUDIO CORPORA TION – 1-800-BUY -HIFI or 1-305-238-4373 5 SW10JM PLACEMENT Before you begin, carefully plan the location of the SW10JM, keeping in mind that the SW10JM will be installed parallel with the rooms’ joist construction.
6 SW10JM IN-CEILING/IN-FLOOR INST ALLA TION The SW10JM subwoofer mounts directly to ceilings or sub-floors between joists and accommodates both 16" and 24" on-center joist construction.
NILES AUDIO CORPORA TION – 1-800-BUY -HIFI or 1-305-238-4373 7 1 . Use template to determine a suitable installation location. Place the SW10JM cardboard template in the desired location making sure the template is level and aligned correctly . Y ou may want to sta ple the template in place for added ease.
8 4 . Attach the supplied front and rear brackets to the 2 x 4’ s using the supplied 1.5" wood screws. NOTE: REMOVE THE STOP BLOCK FROM THE SW10JM PORT . THE STOP BLOCK IS INCLUDED TO PREVENT THE SUBWOOFER FROM DISENGAGING FROM BRACKETS UNTIL THE GRILLE IS INST ALLED.
NILES AUDIO CORPORA TION – 1-800-BUY -HIFI or 1-305-238-4373 9 7 . Install T rim Out Panel to protect cabinet from debris until trim out using the supplied screws. 8 . For trim out, remove T rim Out Panel. 9 . Install the inc luded floor grille into the cut- out opening using the same screws from the T rim Out Panel .
10 1 . Use template to determine a suitable installation location. Place the SW10JM cardboard template in the desired location making sure the template is level and aligned correctly . Y ou may want to staple the template in place for added ease. 2a .
NILES AUDIO CORPORA TION – 1-800-BUY -HIFI or 1-305-238-4373 11 4 . Attach the supplied front and rear brackets to the 2 x 4’ s using the supplied 1.5" screws. NOTE: REMOVE THE STOP BLOCK FROM THE SW10JM PORT . THE STOP BLOCK IS INCLUDED TO PREVENT THE SUBWOOFER FROM DISENGAGING FROM BRACKETS UNTIL THE GRILLE IS INST ALLED.
12 7 . Install the inc luded floor grille into the cut-out opening using the supplied screws. OPTIONAL: The grille can be painted to match most decors but should be painted before installation. Additionally , paint the grille separately from the loudspeaker frame.
NILES AUDIO CORPORA TION – 1-800-BUY -HIFI or 1-305-238-4373 13 1 . Use template to determine a suitable installation location. Place the SW10JM cardboard template in the desired location making sure the template is level and aligned correctly . Y ou may want to staple the template in place for added ease.
14 4 . Place the SW10JM subwoofer into the brackets aligning the attachment pins to the slots in the brackets. Begin with the ported end first. 5 . Install the stop block between the bracket and cabinet at rear of cabinet as indicated in drawing. 6 .
NILES AUDIO CORPORA TION – 1-800-BUY -HIFI or 1-305-238-4373 15 7 . For trim out, remove T rim Out Panel. 8 . Install the inc luded ceiling grille frame into the cut-out opening using the supplied screws. 9 . Install the inc luded ceiling grille into the frame.
16 1 . Use template to determine a suitable installation location. Place the SW10JM cardboard template in the desired location making sure the template is level and aligned correctly . Y ou may want to staple the template in place for added ease. 2a .
NILES AUDIO CORPORA TION – 1-800-BUY -HIFI or 1-305-238-4373 17 4 . Attach the supplied front and rear brackets to the 2 x 4’ s using the supplied 1.5" screws. NOTE: REMOVE THE STOP BLOCK FROM THE SW10JM PORT THE STOP BLOCK IS INCLUDED TO PREVENT THE SUBWOOFER FROM DISENGAGING FROM BRACKETS UNTIL THE GRILLE IS INST ALLED.
18 7 . Install the inc luded ceiling grille into the cut-out opening using the supplied screws. 8 . Install the inc luded ceiling grille into the frame. OPTIONAL: The grille can be painted to match most decors but should be painted before installation.
NILES AUDIO CORPORA TION – 1-800-BUY -HIFI or 1-305-238-4373 19 AMPLIFIER REQUIREMENTS & WIRING The SW10JM is a passive (non-powered) subwoofer and must be used with a power amplifier . W e strongly recommend the Niles SWA-500 subwoofer amplifier .
20 The SW10JM has 5-way binding posts that accept all types of wire ends. Be sure to wire the subwoofer “in-phase”— positive (red) terminal on the amplifier output must be connected to the corresponding positive (red) terminal on the subwoofer and likewise negative (black).
NILES AUDIO CORPORA TION – 1-800-BUY -HIFI or 1-305-238-4373 21 SW10WM (W ALL MOUNT) SUBWOOFER The SW10WM Wall Mount subwoofer includes the following items: Preconstruction package: • 1 Ported cab.
22 SW10WM PLACEMENT Before you begin, carefully plan the loca tion of the SW10WM subwoofer , keeping in mind that the SW10WM will be installed parallel with the room’ s stud construction.
NILES AUDIO CORPORA TION – 1-800-BUY -HIFI or 1-305-238-4373 23 SW10WM IN-W ALL INST ALLA TION The SW10WM subwoofer mounts parallel within the room’ s standard 2 X 4 stud construction. The included cardboard template matches the dimensions of the SW10WM and is used to position the subwoofer .
24 2b . Determine suitable wire routing method. The SW10WM is provided with terminal cups at both the bottom and top of the unit for convenience. Preparing the cabinet 3a . Remove the large bolts located at the top of the cabinet and flip the brackets over re-installing brackets with the same bolts, lea ving them loose.
NILES AUDIO CORPORA TION – 1-800-BUY -HIFI or 1-305-238-4373 25 5 . Secure the brackets to the studs using the provided hardware. 6 . Make necessar y wire connections to terminal cups NOTE: THE SW10WM CABINET HAS THE NECESSAR Y TRIMOUT P ANEL ALREADY INST ALLED.
26 12 . Insert the frame into the cut-out hole securing the frame with the supplied 2" screws where needed to ensure a snug fit against the wall. 13 . Insert the metal grille into the frame pressing firmly all the way around the perimeter . TIP .
NILES AUDIO CORPORA TION – 1-800-BUY -HIFI or 1-305-238-4373 27 AMPLIFIER REQUIREMENTS & WIRING The SW10WM is a passive (non-powered) subwoofer and must be used with a power amplifier . W e strongly recommend the Niles SWA-500 subwoofer amplifier .
28 WIRING FOR NEW CONSTRUCTION For best results, avoid running speaker wire near AC wiring, as it may induce a 60Hz hum in the audio signal. It’ s a good idea to run the speaker wire after the electrical wiring has alread y been completed, so tha t you can route the speaker wire at least three feet away from the electrical wiring.
NILES AUDIO CORPORA TION – 1-800-BUY -HIFI or 1-305-238-4373 29 TROUBLESHOOTING GUIDE If you experience a problem operating the SW10JM or SW10WM, consult this guide first.
30 NOTES.
NILES AUDIO CORPORA TION – 1-800-BUY -HIFI or 1-305-238-4373 31 NOTES.
Niles Audio Corporation 12331 S.W . 130 Street Miami, Florida 33186 1-305-238-4373 1-800-BUY -HIFI – www.nilesaudio.com ©2008 Niles Audio Corporation. All rights reserved. Niles, the Niles logos and Blending High Fidelity and Architecture are registered trademarks of Niles Audio Corporation.
Een belangrijk punt na aankoop van elk apparaat Niles Audio SW10WM (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Niles Audio SW10WM heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Niles Audio SW10WM vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Niles Audio SW10WM leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Niles Audio SW10WM krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Niles Audio SW10WM bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Niles Audio SW10WM kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Niles Audio SW10WM . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
