Gebruiksaanwijzing /service van het product 2009 Quest van de fabrikant Nissan
Ga naar pagina of 376
W elcome to the growing family of new NISSAN owners. This vehicle is delivered to you with confidence. It was produced using the latest techniques and strict quality control. This manual was prepared to help you under- stand the operation and maintenance of your vehicle so that you may enjoy many miles (kilome- ters) of driving pleasure.
This manual includes information for all options available on this model. Therefore, you may find some information that does not apply to your vehicle. All information, specifications and illustrations in this manual are those in effect at the time of printing.
CALIFORNIA PERCHLORATE ADVISORY Some vehicle parts, such as lithium batter- ies, may contain perchlorate material. The following advisory is provided: “Perchlorate Material – special handling may apply, See www.dtsc .ca.gov/hazardouswaste/perchlorate.
NISSAN CARE S... Both NISSAN and your NISSAN dealer are dedicated to serving all your automotive needs. Y our satisfaction with your vehicle and your NISSAN dealer are our primary concerns. Y our NISSAN dealer is always available to assist you with all your automobile sales and service needs.
T able of Contents Illustrated table of contents Safety—Seats, seat belts and supplemental restraint system Instruments and controls Pre-driving checks and adjustments Display screen, heater, air co.
墌 REVIEW COPY— 2009 Quest (van) Owners Manual—USA_English (nna) 07/17/08—debbie 墍.
0 Illustrated table of contents Air bags, seat belts and child restraints ..............0 - 2 Exterior front ......................................0 - 3 Exterior rear .......................................0 - 4 Passenger compartment .................
1. 3rd row bench center seat belt (P . 1-16) 2. 3rd row bench seat belts (P . 1-16) 3. T op tether strap anchor points (P . 1-31) 4. 2nd row captain’s chair seat belts (P . 1-16) 5. Front seat belts (P . 1-16) 6. Roof mounted curtain side-impact air bag (P .
1. Engine hood (P . 3-14) 2. Headlight and turn signal switch (P . 2-19) 3. Replacing bulbs (P . 8-27) 4. Windshield wiper and washer switch (P . 2-16) 5. Windshield (P . 8-17) 6. P ower windows (P . 2-36) 7. Door locks, keyfob, keys (P . 3-3, 3-9, 3-2) 8.
1. Rear window and outside mirror defroster switch (P . 2-18) 2. V ehicle loading (P . 9-12) 3. Lift gate (P . 3-15) 4. Lift gate release (P . 3-18) 5. Rear view monitor (if so equipped) (P .4-29) 6. Replacing bulbs (P . 8-27) 7. Fuel-filler cap, fuel recommendation (P .
1. DVD entertainment system (if so equipped) (P . 4-68) 2. Personal lights (P . 2-42) 3. Skyview roof (if so equipped) (P . 2-39) 4. Moonroof (if so equipped) (P . 2-39) 5. Map lights (P . 2-43) , Console light (P . 2-43) 6. Sun visors (P . 3-22) 7. HomeLink 姞 (if so equipped) (P .
1. V ents (P . 4-32) 2. Headlight/fog light (if so equipped)/turn signal switch (P . 2-19) 3. Steering wheel switch for audio control/Bluetooth 姞 hands-free phone system (if so equipped) (P . 4-64) 4. Driver supplemental air bag/horn (P . 1-53, P . 2-24) 5.
16. P ower outlets (P . 2-26) 17. Shift selector (P . 5-9) 18. Ignition switch (P . 5-7) 19. Tilt steering wheel control (P . 3-21) 20. Rear sonar system off switch (if so equipped) (P . 2-26) 21. V ehicle Dynamic Control (VDC) off switch (if so equipped) or T raction Control System (T CS) off switch (if so equipped) (P .
1. P ower steering fluid reservoir (P . 8-11) 2. Engine oil filler cap (P . 8-8) 3. Air cleaner (P . 8-16) 4. Brake fluid reservoir (P . 8-12) 5. Battery (P . 8-13) 6. Fuse/fusible link box (P . 8-20) 7. T ransmission dipstick (P . 8-11) 8. Engine oil dipstick (P .
W arning light Name Page or Anti-lock Braking System (ABS) warn- ing light 2-8 or Brake warning light 2-8 Charge warning light 2-8 Door open warning light 2-9 Engine oil pressure warning light 2-9 Low.
Indicator light Name Page V ehicle Dynamic Control (VDC) OFF indicator light (if so equipped) 2-13 0-10 Illustrated table of contents 墌 REVIEW COPY— 2009 Quest (van) Owners Manual—USA_English (n.
1 Safety—Seats, seat belts and supplemental restraint system Seats ............................................1 - 2 Front manual seat adjustment (if so equipped) ................................1 - 3 Front power seat adjustment (if so equipped) ...
WARNING ● Do not ride in a moving vehicle when the seatback is reclined. This can be dangerous. The shoulder belt will not be against your body. In an accident, you could be thrown into it and receive neck or other serious injuries. Y ou could also slide under the lap belt and receive serious internal injuries.
Seat Fold/Adjust Summary Position: Operation/page: 1st row All (P . 1-3) 2nd row Forward/backward adjust (P . 1-6) Recline (P . 1-7) Tip-up for 3rd row entry (P .
Seat lifter (if so equipped for driver’s seat) T urn either dial to adjust the angle and height of the seat cushion to the desired position. Lumbar support (driver’s seat) The lumbar support feature provides lower back support to the driver. Move the lever up or down to adjust the seat lumbar area.
FRONT POWER SEAT ADJUSTMENT (if so equipped) Operating tips ● The power seat motor has an auto-reset overload protection circuit. If the motor stops during operation, wait 30 seconds, then reactivate the switch. ● Do not operate the power seat switch for a long period of time when the engine is off.
Seat lifter (if so equipped for driver’s seat) Push the front or rear end of the switch up or down to adjust the angle and height of the seat cushion. Lumbar support (driver’s seat) The lumbar support feature provides lower back support to the driver.
The adjustment lever can be found on the inboard side of the seat. While seated, pull the lever 䊊 1 and hold it while you slide 䊊 2 the seat forward or backward to the desired position. Release the lever to lock the seat in position. Reclining T o recline the seatback, pull up on the lever and lean back.
3RD ROW BENCH SEAT ADJUSTMENT Reclining Lift up on the latch in the center of the seatback to adjust the back of the seat. Release the latch to lock the seatback into position. FRONT-SEAT ACTIVE HEAD RESTRAINTS WARNING ● Always adjust the head restraints prop- erly as specified in this section.
HEAD RESTRAINT ADJUSTMENT T o raise the head restraint, pull it up. T o lower, push and hold the lock knob and push the head restraint down. T o adjust the head restraint forward or backward (T ype B only) , push it in the direction required. The front seats and 2nd row captain’s chairs head restraints are removable.
ARMRESTS T o use the armrests, pull them down to the rest- ing position. 䊊 A Resting position 䊊 B Stowed position Adjustable front seat armrest (if so equipped) T o use the adjustable seat armrest, pull it down to the resting position.
Folding T o fold the seatback forward for cargo hauling, lift up on the recline lever and fold the seatback over the seat base. Folding the 2nd row captain’s chair 䊊 1 For maximum cargo hauling, fold the 2nd row captain’s chairs to the floor. Move the head restraints forward before folding.
䊊 3 Push down on the small knob on the back of the seat to release the base of the seat. 䊊 4 Then fold the entire seat forward into the stowed position in the floor. 䊊 5 Reverse this process to return the 2nd row captain’s chairs to a seating position.
1. Disconnect and secure the center seat belt and tongues into the retractor base. See “Stowing the 3rd row center seat belt” later in this section. 䊊 2 T o fold the 3rd row bench seat flat into the floor for maximum cargo hauling, pull the strap on the seatback to allow all three head restraints to fold forward.
䊊 4 Pull up on the lever located on the back of the seat base. This will fold the seat base toward the back of the vehicle. 䊊 5 The entire seat will rotate toward you and stow in the floor. 䊊 6 The rear seat anchors are spring loaded and can be folded into the side panels to maxi- mize cargo space.
7. Reverse this process to return the bench seat to a seating position. Make sure to properly return the head restraints to the upright position, push the bench seat down into the floor, and pull back on the seatback until they latch into place. WARNING ● Do not unfasten the rear center seat belt connector except when folding down the rear seat.
PRECAUTIONS ON SEAT BELT USAGE If you are wearing your seat belt properly ad- justed and you are sitting upright and well back in your seat with both feet on the floor, your chances of being injured or killed in an accident and/or the severity of injury may be greatly reduced.
WARNING ● Every person who drives or rides in this vehicle should use a seat belt at all times. Children should be properly re- strained in the rear seat and, if appro- priate, in a child restraint. WARNING ● The seat belt should be properly ad- justed to a snug fit.
WARNING ● Always route the shoulder belt over your shoulder and across your chest. Never put the belt behind your back, under your arm or across your neck. The belt should be away from your face and neck, but not falling off your shoulder. ● Position the lap belt as low and snug as possible AROUND THE HIPS, NO T THE WAIST .
CHILD SAFETY Children need adults to help protect them. They need to be properly restrained. In addition to the general information in this manual, child safety information is available from many other sources, including doctors, teachers, government traffic safety offices, and community organizations.
Larger children Children who are too large for child restraints should be seated and restrained by the seat belts which are provided. The seat belt may not fit properly if the child is less than 4 ft 9 in (142.5 cm) tall and weighs between 40 lbs (18 kg) and 80 lbs (36 kg) .
Fastening the seat belts 1. Adjust the seat. See “Seats” earlier in this section. 䊊 2 Slowly pull the seat belt out of the retractor and insert the tongue into the buckle until you hear and feel the latch engage. ● The retractor is designed to lock during a sudden stop or on impact.
The Emergency Locking Retractor (ELR) mode allows the seat belt to extend and retract to allow the driver and passengers some freedom of movement in the seat.
T o increase your confidence in the seat belts, check the operation as follows: ● Grasp the shoulder belt and pull forward quickly . The retractor should lock and re- strict further belt movement. If the retractor does not lock during this check or if you have any questions about seat belt opera- tion, see a NISSAN dealer.
Stowing the 3rd row center seat belt When folding down the 3rd row seat, the 3rd row center seat belt can be retracted into a stowed position as follows: 䊊 1 Hold the connector tongue so that the seat belt does not retract suddenly when the tongue is released from the connector buckle.
Attaching the 3rd row center seat belt Always be sure the 3rd row center seat belt connector tongue and connector buckle are at- tached. Disconnect only when folding down the rear seat. T o connect the buckle: 䊊 1 Pull out the connector tongue from the re- tractor base.
Shoulder belt height adjustment (Front and 2nd row seats) The shoulder belt anchor height should be ad- justed to the position best for you. (See “Precau- tions on seat belt usage” earlier in this section.
SEAT BELT MAINTENANCE ● T o clean the seat belt webbing, apply a mild soap solution or any solution recom- mended for cleaning upholstery or carpet. Then wipe with a cloth and allow the seat belts to dry in the shade. Do not allow the seat belts to retract until they are completely dry .
● Even with the NISSAN Advanced Air Bag System, never install a rear-facing child restraint in the front seat. An in- flating front air bag could seriously in- jure or kill your child. A rear-facing child restraint must only be used in the rear seat.
Several manufacturers offer child restraints for infants and small children of various sizes. When selecting any child restraint, keep the following points in mind: ● Choose only a restraint with a label certifying that it complies with Federal Motor V ehicle Safety Standard 213 or Canadian Motor V ehicle Safety Standard 213.
WARNING ● Attach LA T CH system compatible child restraints only at the locations shown. If a child restraint is not secured properly, your child could be seriously injured or killed in an accident. ● Child restraint anchor points are de- signed to withstand only those loads imposed by correctly fitted child re- straints.
turer. If you have such a child restraint, refer to the illustration for the seating positions equipped with LA T CH system anchors which can be used to secure the child restraint. LA T CH child restraints generally require the use of a top tether strap.
The front passenger seat and 2nd row captain’s chair anchor point locations are marked with the label shown. Installing top tether strap First, secure the child restraint with the LA T CH system (2nd row captain’s seating positions and center seating position only of the 3rd row bench seat) or the seat belt, as applicable.
2nd row captain’s chairs (if so equipped) 1. T op tether strap 2. Anchor point For the 2nd row captain’s chairs (if so equipped) , install the top tether strap as follows: 1. Remove the head restraint. Store it in a secure location. 2. P osition the top tether strap over the top of the seatback.
The center position of the 3rd row bench seat is the seating position that can use a top tether strap. For the 3rd row bench seat (if so equipped) , install the top tether strap as follows: 1. P osition the top tether strap under the head restraint (T ype A) or position the top tether strap around the side of the head restraint (T ype B) .
3. Secure the child restraint anchor attach- ments to the LA T CH lower anchors. Check to make sure the LA TCH attachment is prop- erly attached to the lower anchors. 4. Return the seatback to its normal upright and locked position. The back of the child restraint should be secured against the vehicle seatback.
7. After attaching the child restraint, test it be- fore you place the child in it. Push it from side to side while holding the seat near the LA T CH attachment path. The child restraint should not move more than 1 inch (25 mm) , from side to side. T ry to tug it forward and check to see if the LA T CH attachment holds the restraint in place.
5. For child restraints that are equipped with webbing mounted attachments, remove any additional slack from the anchor attach- ments. Press downward and rearward firmly in the center of the child restraint with your knee to compress the vehicle seat cushion and seatback while tightening the webbing of the anchor attachments.
7. Check to make sure the child restraint is properly secured prior to each use. If the child restraint is loose, repeat steps 3 through 6. CHILD RESTRAINT INSTALLATION USING LA T CH-3RD ROW BENCH SEAT (if so equipped) WARNING ● Attach LA T CH system compatible child restraints only at the locations shown.
5. For child restraints that are equipped with webbing mounted attachments, remove any additional slack from the anchor attach- ments. Press downward and rearward firmly in the center of the child restraint with your knee to compress the vehicle seat cushion and seatback while tightening the webbing of the anchor attachments 6.
7. After attaching the child restraint, test it be- fore you place the child in it. Push it from side to side while holding the seat near the LA T CH attachment path. The child restraint should not move more than 1 inch (25 mm) , from side to side. T ry to tug it forward and check to see if the LA T CH attachment holds the restraint in place.
5. For child restraints that are equipped with webbing mounted attachments, remove any additional slack from the anchor attach- ments. Press downward and rearward firmly in the center of the child restraint with your hand to compress the vehicle seat cushion and seatback while tightening the webbing of the anchor attachments.
7. Check to make sure the child restraint is properly secured prior to each use. If the child restraint is loose, repeat steps 3 through 6. CHILD RESTRAINT INSTALLATION USING THE SEAT BELTS WARNING ● Even with the NISSAN Advanced Air Bag System, never install a rear-facing child restraint in the front passenger seat.
● When using the rear center seat belt to install a child restraint, make sure the connector tongue and the seat belt tongue are secured. Do not use the seat belt with only the seat belt tongue at- tached. This could result in serious per- sonal injury in case of an accident or sudden stop.
3. Route the seat belt tongue through the child restraint and insert it into the buckle until you hear and feel the latch engage. Be sure to follow the child restraint manufacturer’s in- structions for belt routing. 4. Pull the shoulder belt until the belt is fully extended.
6. Remove any additional slack from the seat belt; press downward and rearward firmly in the center of the child restraint with your knee to compress the vehicle seat cushion and seatback while pulling up on the seat belt.
11. If the child restraint is installed in the front passenger seat, turn the ignition switch to the ON position. The front passenger air bag status light should illuminate. If this light is not illuminated see ⬙ Front passenger air bag and status light ⬙ later in this section.
3. Pull the shoulder belt until the belt is fully extended. At this time, the seat belt retractor is in the Automatic Locking Retractor (ALR) mode (child restraint mode) . It reverts to the Emergency Locking Retractor (ELR) mode when the seat belt is fully retracted.
6. After attaching the child restraint, test it be- fore you place the child in it. Push it from side to side while holding the seat near the seat belt path. The child restraint should not move more than 1 inch (25 mm) , from side to side. T ry to tug it forward and check to see if the belt holds the restraint in place.
● Infants and small children should never be carried on your lap. It is not possible for even the strongest adult to resist the forces of a severe accident. The child could be crushed between the adult and parts of the vehicle. Also, do not put the same seat belt around both your child and yourself.
Booster seats of various sizes are offered by several manufacturers. When selecting any booster seat, keep the following points in mind: ● Choose only a booster seat with a label certifying that it complies with Federal Motor V ehicle Safety Standard 213 or Canadian Motor V ehicle Safety Standard 213.
BOOSTER SEAT INSTALLATION WARNING NISSAN recommends that booster seats be installed in the rear seat. However, if you must install a booster seat in the front passenger seat, move the passenger’s seat to the rearmost position.
3. The booster seat should be positioned on the vehicle seat so that it is stable. If neces- sary , adjust or remove the head restraint to obtain the correct booster seat fit. See “Head restraint adjustment” earlier in this section. If the head restraint is removed, store it in a secure place.
7. If the booster seat is installed in the front passenger seat, place the ignition switch in the ON position. The front passenger air bag status light may or may not illuminate, depending on the size of the child and the type of booster seat being used.
WARNING ● The front air bags ordinarily will not inflate in the event of a side impact, rear impact, rollover, or lower severity fron- tal collision. Always wear your seat belts to help reduce the risk or severity of injury in various kinds of accidents.
WARNING ● Never let children ride unrestrained or extend their hands or face out of the window. Do not attempt to hold them in your lap or arms. Some examples of dangerous riding positions are shown in the illustrations.
WARNING ● Children may be severely injured or killed when the front air bags, side air bags or curtain and rollover air bags inflate if they are not properly re- strained. Pre-teens and children should be properly restrained in the rear seat, if possible.
WARNING ● Even with the NISSAN Advanced Air Bag System, never install a rear-facing child restraint in the front seat. An in- flating front air bag could seriously in- jure or kill your child. See “Child re- straints” earlier in this section for details.
WARNING ● The seat belts, the side air bags and curtain air bags are most effective when you are sitting well back and upright in the seat with both feet on the floor.
SSS0159 Safety—Seats, seat belts and supplemental restraint system 1-59 墌 REVIEW COPY— 2009 Quest (van) Owners Manual—USA_English (nna) 07/17/08—debbie 墍.
1. Roof-mounted curtain side-impact supplemental air bag inflators 2. Roof-mounted curtain side-impact supplemental air bag (driver’s side) 3. Seat belt buckle switches 4. Supplemental front-impact air bag mod- ules 5. Crash zone sensor 6. Air bag Control Unit (ACU) 7.
V ehicle damage (or lack of it) is not always an indication of proper front air bag system opera- tion. The NISSAN Advanced Air Bag System has dual stage inflators.
Front passenger air bag and status light WARNING The front passenger air bag is designed to automatically turn OFF under some con- ditions. Read this section carefully to learn how it operates. Proper use of the seat, seat belt and child restraints is nec- essary for most effective protection.
air bag should be automatically turned OFF as required by the regulations. Front passenger seat adult occupants who are properly seated and using the seat belt as out- lined in this manual should not cause the passen- ger air bag to be automatically turned OFF .
Other supplemental front-impact air bag precautions WARNING ● Do not place any objects on the steer- ing wheel pad or on the instrument panel. Also, do not place any objects between any occupant and the steering wheel or instrument panel. Such ob- jects may become dangerous projec- tiles and cause injury if the front air bags inflate.
Front seat-mounted side-impact supplemental air bag and roof- mounted curtain side-impact supplemental air bag systems The side air bags are located in the outside of the seatback of the front seats. The curtain air bags are located in the side roof rails.
● Right after inflation, several side air bag and curtain air bag system components will be hot. Do not touch them; you may severely burn yourself. ● No unauthorized changes should be made to any components or wiring of the side air bag and curtain air bag systems.
The pretensioner system activates in conjunction with the front air bag system. W orking with the seat belt retractor, it helps tighten the seat belt when the vehicle becomes involved in certain types of collisions, helping to restrain front seat occupants.
SUPPLEMENTAL AIR BAG WARNING LIGHT The supplemental air bag warning light, displaying in the instrument panel, moni- tors the circuits of the supplemental front-impact air bag, front seat-mounted side-impact supple- mental air bag, roof-mounted curtain side-impact supplemental air bag and seat belt pretensioner systems.
● The front air bag, side air bag, curtain air bag systems and the pretensioner system should be inspected by a NISSAN dealer if there is any damage to the front end or side portion of the vehicle. ● If you need to dispose of a supplemen- tal air bag or pretensioner or scrap the vehicle, contact a NISSAN dealer.
2 Instruments and controls Instrument panel ...................................2 - 2 Meters and gauges ................................2 - 3 Speedometer and odometer .....................2 - 4 T achometer ....................................2 - 4 Engine coolant temperature gauge .
Cup holders .................................. 2-32 3rd row armrest bin ............................ 2-34 Cargo area storage bin ......................... 2-35 Garment hook ................................. 2-35 Roof rack (if so equipped) ............
1. V ents (P . 4-32) 2. Headlight/fog light (if so equipped)/turn signal switch (P . 2-19) 3. Steering wheel switch for audio control/Bluetooth 姞 hands-free phone system (if so equipped) (P . 4-64) 4. Driver supplemental air bag/horn (P . 1-53, P . 2-24) 5.
16. P ower outlets (P . 2-26) 17. Shift selector (P . 5-9) 18. Ignition switch (P . 5-7) 19. Tilt steering wheel control (P . 3-21) 20. Rear sonar system off switch (if so equipped) (P . 2-26) 21. V ehicle Dynamic Control (VDC) off switch (if so equipped) or T raction Control System (T CS) off switch (if so equipped) (P .
SPEEDOMETER AND ODOMETER Speedometer The speedometer indicates vehicle speed. Odometer/T win trip odometer The odometer/twin trip odometer is displayed when the ignition switch is placed in the ON position. The odometer records the total distance the ve- hicle has been driven.
ENGINE COOLANT TEMPERATURE GAUGE The gauge indicates the engine coolant tempera- ture. The engine coolant temperature is within the normal range 䊊 1 when the gauge needle points within the zone shown in the illustration. The engine coolant temperature varies with the outside air temperature and driving conditions.
The indicates that the fuel-filler door is located on the driver’s side of the vehicle. CAUTION ● If the vehicle runs out of fuel, the Malfunction Indicator Light (MIL) may come on. Refuel as soon as possible. After a few driving trips, the light should turn off.
or Anti-lock Braking System (ABS) warning light Seat belt warning light and chime Front passenger air bag status light or Brake warning light Supplemental air bag warning light Security indicator ligh.
CHECKING BULBS With all doors closed, apply the parking brake and place the ignition switch in the ON position without starting the engine. The following lights will come on: , or , , , The following .
the generator belt. If the belt is loose, broken, missing, or if the light remains on, see a NISSAN dealer immediately . CAUTION Do not continue driving if the generator belt is loose, broken or missing. Door open warning light This light comes on when any of the doors are not closed securely while the ignition switch is placed in the ON position.
TPMS malfunction: If the TPMS is not functioning properly , the low tire pressure warning light will flash for approxi- mately 1 minute when the ignition switch is placed in the ON position. The light will remain on after the 1 minute. Have the system checked by a NISSAN dealer.
The seat belt warning light may also illuminate if the front passenger’s seat belt is not fastened when the front passenger’s seat is occupied . For 7 seconds after the ignition switch is placed in the ON position, the system does not activate the warning light for the front passenger.
High beam indicator light (blue) This blue light comes on when the headlight high beams are on and goes out when the low beams are selected. The high beam indicator light also comes on when the passing signal is activated.
For additional information, see “Security sys- tems” later in this section. Slip indicator light This indicator light will blink when the traction control system is limiting wheel spin. Slippery road conditions may exist if the slip indicator blinks on.
Light reminder chime With the ignition switch placed in the OFF posi- tion, a chime sounds when the driver’s door is opened if the headlights or parking lights are on.
● When the button is pushed with all doors locked, the hazard lights flash twice and the horn beeps once as a re- minder that the doors are already locked.
3. Repeat steps 1 and 2. 4. Restart the engine while holding the device (which may have caused the interference) separate from the registered key . If the no start condition re-occurs, NISSAN rec- ommends placing the registered key on a sepa- rate key ring to avoid interference from other devices.
NO TE: Y ou can turn on or turn off the driving speed dependent intermittent wiper func- tion for vehicles with color display screen. Refer to “V ehicle electronic systems” in the “Display screen, heater, air conditioner, au- dio and phone systems” section later in this manual.
WARNING In freezing temperatures the washer solu- tion may freeze on the window and ob- scure your vision. Warm the rear window with the defroster before you wash the rear window. CAUTION ● Do not operate the washer continu- ously for more than 30 seconds.
HEADLIGHT CONTROL SWITCH Lighting 䊊 1 When turning the switch to the posi- tion, the front parking, tail, license plate and instrument panel lights come on. 䊊 2 When turning the switch to the posi- tion, the headlights come on and all the other lights remain on.
NO TE: Autolight activation sensitivity and the time delay for autolight shutoff is adjust- able for vehicles with color display screen. See “V ehicle electronic systems” in the “Display screen, heater, air conditioner, au- dio and phone systems” section later in this manual.
After the headlights automatically turn off with the headlight switch in the or position, the headlights will illuminate again for 5 minutes if the headlight switch is moved to the OFF position and then turned to the or position.
The instrument brightness control will not adjust the brightness when the headlights or parking lights are off. T URN SIGNAL SWITCH T urn signal 䊊 1 Move the lever up or down to signal the turning direction. When the turn is com- pleted, the turn signals cancel automatically .
The headlights must be on and the low beams selected for the fog lights to operate. The fog lights automatically turn off when the high beam headlights are selected. CORNERING LIGHT The cornering light provides additional illumina- tion toward the turning direction.
The flashers will operate with the ignition switch placed in any position. Some state laws may prohibit the use of the hazard warning flasher switch while driving. T o sound the horn, push the center pad area of the steering wheel near the horn icons.
CAUTION ● Do not use the seat heater for extended periods or when no one is using the seat. ● Do not put anything on the seat which insulates heat, such as a blanket, cush- ion, seat cover, etc . Otherwise, the seat may become overheated. ● Do not place anything hard or heavy on the seat or pierce it with a pin or similar object.
WARNING The rear sonar system is a convenience but it is not a substitute for proper back - ing. Always turn and check that it is safe to do so before backing up. Always back up slowly. The rear sonar system (if so equipped) is active when the ignition switch is placed in the ON position and the shift selector is in R (Reverse) .
CAUTION ● The outlet and plug may be hot during or immediately after use. ● This power outlet is not designed for use with a cigarette lighter unit. ● Do not use with accessories that ex - ceed a 12 volt, 120W (10A) power draw. Do not use double adapters or more than one electrical accessory.
INSTRUMENT PANEL STORAGE CONSOLE BOX (if so equipped) Push the corresponding button 䊊 1 to open the small storage compartments. Press the front portion of the lid 䊊 2 down from the handle area until it stops. While keeping the downward force applied, push the lid rearward 䊊 3 to the desired opening amount.
Pull up on the lever to access the front storage bin on the console box. CENTER TRAY TABLE (if so equipped) T o use the center tray table, raise it up until it locks into the upright position. T o access the small storage compartment on the top of the tray table, raise the lid.
T o store the tray table, pull the lever located beneath the tray table up 䊊 A and gently lower the tray table to its original position. GLOVE BOX Open the glove box by pulling the handle. Use the master key when locking 䊊 1 or unlocking 䊊 2 the glove box.
SEATBACK POCKETS The seatback pockets are located on the back of the driver’s and passenger’s seats. The pockets can be used to store maps. GROCERY HOOKS The grocery hooks allow for standard size plastic grocery bags to hang side by side. CAUTION Do not apply a total load of more than 18 lbs (8 kg) to a single grocery hook.
CARGO NET (if so equipped) The net located on the back of the driver’s seat can be used to hold small objects. WARNING ● Do not place sharp objects in the net. Such objects may become dangerous projectiles and cause injury when the vehicle is moving or if the vehicle is involved in a collision.
Front T o use the cup holders, raise the center tray table. Refer to “Center tray table” earlier in this section. 2nd row T ype A LIC0955 T ype B LIC0896 LIC0509 Instruments and controls 2-33 墌 .
3rd row Soft bottle holder CAUTION ● Do not use bottle holder for any other objects that could be thrown about in the vehicle and possibly injure people during sudden braking or an accident. ● Do not use bottle holder for open liquid containers. 3RD ROW ARMREST BIN Raise the lid to open the 3rd row armrest bin.
CARGO AREA STORAGE BIN T o open the cargo area storage bin, turn the knob counterclockwise 䊊 1 . The lid can be removed. T o close, replace the lid and turn the knob clock- wise 䊊 2 . GARMENT HOOK T o store garments, pull the garment hook down to the use position.
WARNING ● Drive extra carefully when the vehicle is loaded at or near the cargo carrying capacity, especially if the significant portion of that load is carried on the roof rack. ● Heavy loading of the roof rack has the potential to affect the vehicle stability and handling during sudden or abnor- mal handling maneuvers.
Driver’s side power window switch The driver’s side control panel is equipped with switches to open or close all of the windows. The power windows operate when the ignition switch is placed in the ON position, or for about 45 seconds after the ignition switch is placed in the OFF position.
Auto-reverse function The auto-reverse function can be activated when a window is closed by automatic operation. Depending on the environment or driving conditions, the auto-reverse function may be activated if an impact or load similar to something being caught in the window oc- curs.
MANUAL VENT WINDOWS (if so equipped) T o open a manual vent window, pull the latch handle toward you until it releases. T o lock the window in the open position, push the latch handle rearward until it locks.
Sliding the moonroof T o fully open the moonroof, push the switch to- ward the open position 䊊 3 . T o fully close the moonroof, push the switch toward the close position 䊊 4 . T o open or close the moonroof part way, push the switch in any direction 䊊 5 while the roof is sliding open or closed to stop it in the desired position.
CAUTION ● Remove water drops, snow, ice or sand from the moonroof before opening. ● Do not place heavy objects on the moonroof or surrounding area. Sunshade Open and close the sunshade by sliding it for- ward or backward. If the moonroof does not close Have your NISSAN dealer check and repair the moonroof.
NO TE: The footwell and door step lights illuminate when the driver and passenger doors are open regardless of the lights on demand switch position. These lights will turn off automatically after 30 minutes while doors are open to prevent the battery from be- coming discharged.
The cargo light on the overhead trim (T ype C) has a three-position switch. T o operate, push the light. On: The light is illuminated Normal: The light illuminates when any door is opened or unlocked by the keyfob. The light turns off after 30 seconds or when all doors are closed.
The HomeLink 姞 Universal T ransceiver provides a convenient way to consolidate the functions of up to three individual hand-held transmitters into one built-in device.
3. Using both hands, simultaneously press and hold both the HomeLink 姞 button you want to program and the hand-held transmitter but- ton. DO NO T release the buttons until step 4 has been completed. 4. Hold down both buttons until the indicator light on the HomeLink 姞 flashes, changing from a “slow blink” to a “rapidly flashing blink” .
NO TE: When programming a garage door opener, etc ., it is advised to unplug the device dur- ing the “cycling” process to prevent pos- sible damage to the garage door opener components. OPERATING THE HOMELINK 姞 UNIVERSAL TRANSCEIVER The HomeLink 姞 Universal T ransceiver (once pro- grammed) may now be used to activate the ga- rage door, etc.
FCC Notice: This device complies with FCC rules part 15 and RSS-210 of Industry Canada. Opera- tion is subject to the following two condi- tions: (1) This device may not cause harmful in- terference and (2) This device must accept any interference that may be received, in- cluding interference that may cause undes- ired operation.
2-48 Instruments and controls MEMO.
3 Pre-driving checks and adjustments K e y s .............................................3 - 2 NISSAN vehicle immobilizer system keys ..........3 - 2 Doors ............................................3 - 3 Locking with key ...........................
1. T wo master keys (black) with transpon- der chip and chrome NISSAN brand symbol on one side 2. V alet key (black) with transponder chip 3. K ey number plate 4. T ransponder chip A key number plate is supplied with your keys. Record the key number and keep it in a safe place (such as your wallet) , not in the vehicle.
WARNING ● Always have the doors locked while driving. Along with the use of seat belts, this provides greater safety in the event of an accident by helping to prevent persons from being thrown from the vehicle. This also helps keep children and others from unintentionally open- ing the doors, and will help keep out intruders.
Opening and closing windows The driver’s door key operation allows you to open and close windows equipped with auto- matic operation at the same time. ● T o open the windows, turn the driver’s door key toward the rear of the vehicle for longer than 1 second after the door is unlocked.
LOCKING WITH POWER DOOR LOCK SWITCH T o lock all the doors without a key, push the door lock switch (driver’s or front passenger’s side) to the lock position 䊊 1 . When locking the door this way , be certain not to leave the key inside the vehicle.
USING THE MAIN ON/OFF SWITCH FOR THE POWER SLIDING DOOR (if so equipped) The main ON/OFF switch is located in the over- head console. Push the switch ON to enable the door pillar switches and the power assist feature. An indica- tor light will illuminate when the switch is in the ON position.
Power Assist : If the main on/off switch is ON and a sliding door is unlocked and manually moved toward the open or closed position using the inside or outside handle, the power assist feature will be activated and the door will complete its motion automati- cally .
WARNING There are some small distances immedi- ately before the closed position which cannot be detected. Make sure that all passengers have their hands, etc .
CHILD SAFETY SLIDING DOOR LOCK The child safety lock helps prevent the sliding door from being opened accidentally , especially when small children are in the vehicle.
Be sure to remove the key from the vehicle before locking the doors. The keyfob can operate at a distance of approxi- mately 33 ft (10 m) from the vehicle. The effective distance depends upon the conditions around the vehicle. As many as 5 keyfobs can be used with one vehicle.
● When the button is pushed with all doors locked, the hazard warning lights flash twice and the horn beeps once as a re- minder that the doors are already locked. ● If a door is open and you push the button, the doors will lock but the horn will not beep and the hazard warning lights will not flash.
Opening windows The keyfob allows you to open windows equipped with automatic operation simulta- neously . ● T o open the windows, press the but- ton on the keyfob for longer than 3 sec- onds after all doors are unlocked. The door windows will open while pressing the button on the keyfob.
Using the panic alarm If you are near your vehicle and feel threatened, you may activate the panic alarm to call attention by pushing and holding the button on the keyfob for longer than 0.5 seconds. The panic alarm and headlights will stay on for 25 seconds.
Using the interior lights Push the button on the keyfob once to turn on the interior lights and puddle lamps (if so equipped) . For additional information, refer to “Lights on demand switch” in the “Instruments and controls” section earlier in this manual.
WARNING ● Always be sure the lift gate has been closed securely to prevent it from open- ing while driving. ● Do not drive with the lift gate open. This could allow dangerous exhaust gases to be drawn into the vehicle. See “Ex - haust gas” in the “Starting and driving” section of this manual.
OFF while the lift gate is opening or closing will cancel the operation and the lift gate will go to manual mode. When the switch is in the OFF position, the lift gate can still be opened with the keyfob or over- head console switch. The lift gate can also be opened manually with the outside handle if the lift gate is unlocked.
● The lift gate must be unlocked to open it with the outside opener handle. ● The switch on the rear pillar cannot be used to open the lift gate . A warning chime will sound if the shift selector is moved out of P (Park) during a power open operation.
Safe Mode: If the lift gate gas stays 䊊 1 lose pressure, the power lift gate safe mode is activated. When the safe mode is activated, the lift gate slowly closes. A continuous warning chime sounds until the lift gate is in the fully down position. Then the lift gate will be pulled to the closed and latched position by a motor.
Manual lift gate (if so equipped) If the lift gate cannot be locked or unlocked with the door lock switch or the keyfob due to a discharged battery , follow these steps: 1. Remove the cover on the inside of the lift gate. 2. Move the lever down to lock or up to unlock.
FUEL-FILLER CAP The fuel-filler cap is a ratcheting type. T urn the cap counterclockwise to remove. T o tighten, turn the cap clockwise until ratcheting clicks are heard. Put the fuel-filler cap on the cap holder 䊊 1 while refueling. WARNING ● Gasoline is extremely flammable and highly explosive under certain condi- tions.
CAUTION ● If fuel is spilled on the vehicle body, flush it away with water to avoid paint damage. ● Insert the fuel-filler cap straight into the fuel-filler tube, then tighten until the fuel-filler cap clicks. Failure to tighten the fuel-filler cap properly may cause the Malfunction Indicator Light (MIL) to illuminate.
CAUTION Do not adjust the pedal position with your foot on the pedal. 䊊 1 T o block glare from the front, swing down the main sun visor. 䊊 2 T o block glare from the side, remove the main sun visor from the center mount and swing the visor to the side.
V ANITY MIRRORS T o access the vanity mirror, pull the sun visor down and flip open the mirror cover. The vanity mirror will illuminate when the mirror cover is open. REARVIEW MIRROR (if so equipped) The night position 䊊 1 reduces glare from the headlights of vehicles behind you at night.
For information on HomeLink 姞 Universal T rans- ceiver operation, see the “HomeLink 姞 Universal T ransceiver” in the “Instrument and controls” sec- tion of this manual. OUTSIDE MIRRORS WARNING Objects viewed in the outside mirror on the passenger side are closer than they appear.
Heated mirrors (if so equipped) Some outside mirrors can be heated to defrost, defog, or de-ice for improved visibility . For addi- tional information, see “Rear window and outside mirror (if so equipped) defroster switch” in the “Instrument and controls” section of this manual.
The automatic drive positioner system has two features: ● Memory storage function ● Entry/exit function MEMORY STORAGE FUNCTION T wo positions for the driver’s seat, accelerator and brake pedals, and outside mirrors can be stored in the automatic drive positioner memory .
2. While the indicator light for the memory switch being set is illuminated for 5 sec- onds, press the button on the keyfob. The indicator light will blink. After the indica- tor light goes off, the keyfob is linked to that memory setting. With the key removed from the ignition switch, press the button on the keyfob.
The entry/exit function can be adjusted or can- celed. See “V ehicle electronic systems” in the “Monitor, climate, audio, phone and voice recog- nition systems” section of this manual. Restarting the entry/exit function If the battery cable is disconnected or if the fuse opens, the entry/exit function will be disabled.
Pre-driving checks and adjustments 3-29 MEMO.
4 Display screen, heater, air conditioner, audio and phone systems Control panel buttons — with monochrome screen (if so equipped) ...................................4 - 2 How to use the TRIP button .....................4 - 3 How to use the SETTING button .
Audio operation precautions .................... 4-47 FM/AM/SA T radio with compact disc (CD) player (if so equipped) ......................... 4-52 FM/AM/SA T radio with compact disc (CD) changer (T ype A and B) (if so equipped) ......... 4-59 CD care and cleaning .
WARNING ● Do not disassemble or modify this sys- tem. If you do, it may result in accidents, fire, or electrical shock. ● Do not use this system if you notice any abnormality, such as a frozen screen or lack of sound. Continued use of the system may result in accident, fire or electric shock.
CAUTION ● The glass screen on the liquid crystal display may break if it is hit with a hard or sharp object. If the glass breaks, do not touch the liquid crystalline material, which contains a small amount of mer- cury. In case of contact with skin, wash immediately with soap and water.
● When driving uphill or rounding curves, the fuel in the tank shifts, which may momentarily change the display . Average speed (MPH or km/h) The Average Speed mode shows the average speed since the last reset. T o calculate the aver- age speed, driving distance is divided by driving time.
Tire pressure information Pressure indication in **psi on the screen indi- cates that the pressure is being measured. After a few driving trips, the pressure for each tire will be displayed randomly . The order of the tire pressure figures displayed on the screen does not correspond with the actual order of the tire position.
For additional information, see “ button” later in this section. Clock operation The digital clock displays time when the ignition switch is in the ACC or ON position. If the power supply is disconnected, the clock will not indicate the correct time.
DOOR WARNING The DOOR OPEN screen will be automatically displayed as shown when both of the following conditions are met: ● The vehicle is driven with a door(s) open for longer than 2.5 seconds. ● The vehicle speed is greater than 3 MPH (5 km/h) .
CAUTION ● The glass screen on the liquid crystal display may break if it is hit with a hard or sharp object. If the glass breaks, do not touch the liquid crystalline material, which contains a small amount of mer- cury. In case of contact with skin, wash immediately with soap and water.
● Average Speed - Average speed driven (MPH or km/h) since the last reset. Resetting trip 1 and trip 2 Each trip screen can be reset to 0. Press the TRIP button to select the TRIP screen to be reset. ● Select the “Reset” key on screen by press- ing the ENTER button, or ● Press the TRIP button for more than approxi- mately 1.
Maintenance items Press the TRIP button to display maintenance information or set maintenance intervals for the following: ● Engine Oil ● Tire Rotation ● Tire Pressure (if so equipped) For setting the Tire Pressure display , refer to “Tire pressure information” later in this section.
Displaying the maintenance notice re- minder Select the “Display Maintenance Notification” key and press the ENTER button to display the MAINTENANCE INFORMA TION automatically at the set maintenance interval.
Tire pressure rises and falls depending on the heat caused by the vehicle’s operation and the outside temperature. In case of low tire pressure, a message is dis- played on the screen: L OW PRESSURE — Check All Tires.
Brightness/contrast/screen background: Select the “Brightness/Contrast/Screen Back - ground” key to adjust the brightness and contrast of the screen. Use the joystick to select and adjust the brightness to darker or brighter and the contrast to lower or higher.
Lower display setting: Y ou can choose to display the audio or HV AC (Heater and air conditioner) functions on the lower part of the display . Select the “Lower Dis- play Setting” key by using the joystick. Then se- lect the “ Audio” or “HVAC” key using the joystick or by pressing the ENTER button.
Adjust driver seat when exiting vehicle: Se- lect so the driver’s seat automatically moves back and returns to the original position for ease of exit and entry .
Speed dependent wiper: Select to turn on or turn off the driving speed dependent intermittent wiper function. Return all settings to default : Select to change all VEHICLE ELECTRONICS S Y STEMS to their default settings. System settings Select the “System Settings” key by using the joystick and pressing the ENTER button.
Clock Adjusting the time: Select the “Hours” or “Minutes” key and move the joystick to the right or left to adjust the time. The time will change step by step. The new settings are automatically saved when you exit the setting screen by pressing the BACK or any other mode button.
1. ROUTE button* 2. DEST button* 3. MAP button* 4. BACK (previous) button (P . 4-19) 5. zoom out button* 6. Joystick and ENTER button (P . 4-19) 7. zoom in button* 8. VOICE button* 9. SETTING button (P . 4-23) 10. brightness control button (P . 4-29) 11.
Reference symbols: ENTER button — This is a button on the control panel. By pressing this button you can select the item or perform the action. “Display” key — This is a select key on the screen. By selecting this key you can proceed to the next function.
● Average Speed - Average speed driven (MPH or km/h) since the last reset. Resetting trip 1 and trip 2 Each trip screen can be reset to 0. Press the TRIP button to select the TRIP screen to be reset. ● Select the “Reset” key on screen by press- ing the ENTER button, or ● Press the TRIP button for more than approxi- mately 1.
Maintenance items Press the TRIP button to display maintenance information or set maintenance intervals for the following: ● Engine Oil ● Tire Rotation ● Tire Pressure (if so equipped) For setting the Tire Pressure display , refer to “Tire pressure information” later in this section.
Displaying the maintenance notice re- minder Select the “Display Maintenance Notification” key and press the ENTER button to display the MAINTENANCE INFORMA TION automatically at the set maintenance interval.
Tire pressure rises and falls depending on the heat caused by the vehicle’s operation and the outside temperature. In case of low tire pressure, a message is dis- played on the screen: L OW PRESSURE — Check All Tires.
Brightness/contrast : Select the “Brightness/Contrast” key to adjust the brightness and contrast of the map back - ground. Use the joystick to adjust the brightness to darker or brighter and the contrast to lower or higher.
Lower display setting: Y ou can choose to display the audio or HV AC (Heater and air conditioner) functions on the lower part of the display . Select the “Lower Dis- play Setting” key by using the joystick. Then se- lect the “ Audio” or “HVAC” key using the joystick or by pressing the ENTER button.
Adjust Driver Seat When Exiting V ehicle: Select so the driver’s seat automatically moves back and returns to the original position for ease of exit and entry .
System settings Select the “System Settings” key by using the joystick and pressing the ENTER button. The S Y STEM SETTINGS screen will be displayed. Language/unit The LANGUAGE/UNIT screen will appear when selecting the “Language/Unit” key and pressing the ENTER button.
Setting daylight savings time: Use the “Daylight Saving Time” key to adjust the clock to daylight savings time. ON: Automatically adjusts for daylight savings time. OFF: The current time is displayed. Adjusting the time to the GPS: Select the “ Auto Adjust” key.
2. Select one of the following zones, depend- ing on the current location. ● Pacific zone ● Mountain zone ● Central zone ● Eastern zone ● Atlantic zone ● Newfoundland zone After selection, the CL OCK SETTINGS screen will appear. The GPS time (manual time) corresponding to the selected zone will be displayed.
● When washing the vehicle with high- pressure water, be sure not to spray it around the camera. Otherwise, water may enter the camera unit causing wa- ter condensation on the lens, a mal- function, fire or an electric shock. ● Do not strike the camera.
● When the temperature is extremely high or low , the screen may not clearly display ob- jects. This is not a malfunction. ● When strong light directly enters the cam- era, objects may not be displayed clearly . ● V ertical lines may be seen in objects on the screen.
Adjust air flow direction for the driver and pas- senger side 䊊 1 , center 䊊 2 , and rear passenger 䊊 3 ventilators by moving the ventilator slide and/or ventilator assemblies. WARNING ● The air conditioner cooling function op- erates only when the engine is running.
1. Fan speed control dial 2. Air conditioner button 3. Front window defrost/defog button 4. Rear window defroster switch 5. Air recirculation button 6. T emperature control dial 7. Air flow control buttons CONTROLS Fan control dial The fan control dial turns the fan on and off, and controls fan speed.
Use the off position for normal heater or air con- ditioner operation. Air conditioner button Start the engine, turn the fan control dial to the desired position and push the button to turn on the air conditioner. A/C will appear on the display when the air conditioner is operating.
Bi-level heating The bi-level mode directs warmed air to the side and center vents and to the front and rear floor outlets. 1. Push the button to the OFF position ( shown on display) . 2. Press the air flow control button. 3. T urn the fan control dial to the desired posi- tion.
4. Push the button. The display shows A/C. 5. T urn the temperature control dial to the de- sired position. Operating tips ● K eep the windows closed while the air con- ditioner is in operation. ● After parking in the sun, drive for 2 or 3 minutes with the windows open to vent hot air from the passenger compartment.
WHA0644 WHA0645 Display screen, heater, air conditioner, audio and phone systems 4-37 墌 REVIEW COPY— 2009 Quest (van) Owners Manual—USA_English (nna) 07/17/08—debbie 墍.
WHA0646 WHA0647 4-38 Display screen, heater, air conditioner, audio and phone systems 墌 REVIEW COPY— 2009 Quest (van) Owners Manual—USA_English (nna) 07/17/08—debbie 墍.
WHA0648 Display screen, heater, air conditioner, audio and phone systems 4-39 墌 REVIEW COPY— 2009 Quest (van) Owners Manual—USA_English (nna) 07/17/08—debbie 墍.
WHA0649 4-40 Display screen, heater, air conditioner, audio and phone systems 墌 REVIEW COPY— 2009 Quest (van) Owners Manual—USA_English (nna) 07/17/08—debbie 墍.
WHA0650 Display screen, heater, air conditioner, audio and phone systems 4-41 墌 REVIEW COPY— 2009 Quest (van) Owners Manual—USA_English (nna) 07/17/08—debbie 墍.
1. Driver temperature control dial/AUT O button 2. A/C ON/OFF button 3. Fan speed control (decrease) 4. Front window defroster button 5. System off button 6. Rear window defroster button 7. Fan speed control (increase) 8. Air recirculation button 9. Passenger temperature control dial/ DUAL button 10.
● The temperature of the passenger compart- ment will be maintained automatically . Air flow distribution, fan speed and A/C on/off are also controlled automatically . ● A visible mist may be seen coming from the ventilators in hot, humid conditions as the air is cooled rapidly .
OPERATING TIPS ● When the engine coolant temperature and outside air temperature are low , the air flow from the foot outlets may not operate for a maximum of 150 seconds. However, this is not a malfunction. After the coolant tempera- ture warms up, air flow from the foot outlets will operate normally .
1. Rear fan speed control dial 2. Rear temperature control dial CONTROLS Fan control dial The fan control dial turns the rear vent fan on and off and controls fan speed. T emperature control dial The temperature control dial allows rear passen- gers to adjust the temperature of the outlet air.
Reception conditions will constantly change be- cause of vehicle movement. Buildings, terrain, signal distance and interference from other ve- hicles can work against ideal reception. De- scribed below are some of the factors that can affect your radio reception.
AUDIO OPERATION PRECAUTIONS Compact disc (CD) player CAUTION ● Do not force a compact disc into the CD insert slot. This could damage the CD and/or CD changer/player. ● T rying to load a CD with the CD door closed could damage the CD and/or CD changer.
CHECK DISC: ● Confirm that the CD is inserted cor- rectly (the label side is facing up, etc .) . ● Confirm that the CD is not bent or warped and it is free of scratches. PRESS EJECT: This is an error due to excessive tem- perature inside the player.
Playback order: Music playback order of a CD with MP3 or WMA files is as illustrated. ● The names of folders not containing MP3 or WMA files are not shown in the display . ● If there is a file in the top level of the disc, “Root Folder” is displayed.
Specification chart : Supported media CD, CD-R, CD-RW Supported file systems ISO9660 LEVEL1, ISO9660 LEVEL2, Apple ISO, Romeo, Joliet * ISO9660 Level 3 (packet writing) is not supported.
T roubleshooting guide: Symptom Cause and Countermeasure Cannot play Check if the disc was inserted correctly. Check if the disc is scratched or dirty. Check if there is condensation inside the player. If there is, wait until the condensation is gone (about 1 hour) before using the player.
1. SEEK/TRACK button 2. PRESET A·B·C button 3. CD/DVD button 4. Station select (1 - 6) buttons 5. POWER/VOLUME control knob 6. REAR CTRL button 7. AUX button 8. TUNE/CA T button 9. DISP button 10. FM·AM/SA T (satellite) radio button* 11. SCAN/RPT button 12.
Audio main operation Power/V olume control: T urn the ignition key to ACC or ON, and then press the POWER/VOLUME control knob while the system is off to call up the mode (radio or CD) which was playing immediately before the system was turned off. T o turn the system off, press the POWER/VOLUME control knob.
Display satellite radio display mode (if so equipped) T o change the text displayed when listening to satellite radio (if so equipped) press the DISP button. The DISP button will scroll through the broadcast information as follows: Name ←→ Title ←→ Current display mode.
Station memory operations: 18 stations can be set for the FM, AM and SA T radio to the A , B and C preset button in any combination of AM, FM or SA T* stations. 1. Press the PRESET A·B·C button to change between storage banks. The radio displays the icon A , B or C to indicate which set of presets are active.
When the button is pressed for less than 1.5 seconds while a compact disc is playing, the next track will start to play from its beginning. Press several times to skip through tracks. The compact disc will advance the number of times the button is pressed.
1. SEEK/TRACK button 2. PRESET A·B·C button 3. CD/DVD button 4. Station and CD select (1 - 6) buttons 5. POWER/VOLUME control knob 6. REAR CTRL button 7. AUX button 8. TUNE/FLDR·CA T button 9. DISP button 10. FM·AM/SA T (satellite) radio button* 11.
1. SEEK/TRACK button 2. PRESET A·B·C button 3. CD/DVD button 4. Station and CD select (1 - 6) buttons 5. POWER/VOLUME control knob 6. REAR CTRL button 7. AUX button 8. TUNE/FLDR·CA T button 9. DISP button 10. SCAN button 11. FM·AM/SA T (satellite) radio select but- ton* 12.
FM/AM/SA T RADIO WITH COMPACT DISC (CD) CHANGER (T ype A and B) (if so equipped) For all operation precautions, see ⬙ Audio opera- tion precautions ⬙ earlier in this section.
● Folder number mode displays the folder number and the file number of the folder currently being played. ● Disc number mode displays the number se- lected disc and the track that is currently being played.
remain tuned to that station. If the SCAN RPT button is not pressed within 5 seconds, SCAN tuning moves to the next station. SCAN tuning (T ype B only) : Press the SCAN button for more than 1.5 sec- onds to stop at each broadcasting station for 5 seconds.
CD/DVD button: When the CD/DVD button is pressed with the system off and the compact disc loaded, the system will turn on and the compact disc will start to play . When the CD/DVD button is pressed with the compact disc loaded with the radio playing, the radio will automatically be turned off and the compact disc will start to play .
If the vehicle is not equipped with a rear seat audio controller, the display will show “REAR A V N/A ” . (SPEAKER CONTROL) button: Press this button to turn the rear speakers off and the headphones on. Press this button again to turn rear seat speakers back on and the headphones off.
● A new disc may be rough on the inner and outer edges. Remove the rough edges by rubbing the inner and outer edges with the side of a pen or pencil as illustrated. 1. V olume control switch 2. MODE select switch 3. POWER on/off switch 4. T uning switch 1.
POWER on/off switch If you have the T ype A switch, with the ignition switch placed in the ACC or ON position, push the POWER switch to turn the audio system on or off. If you have the T ype B switch, with the ignition switch placed in the ACC or ON position, push the MODE switch to turn the audio system on.
1. VOL (volume) control button 2. MODE select button 3. speaker control button 4. NEXT button 5. SEEK button 6. Headphone jacks 7. Infrared headphone transmitter lens* *Red transmitters will be visible when infrared headphones are on.
VOL (volume) button: The VOL button allows the rear passengers to adjust the headphone volume level. The vehicle volume can also be changed if the REAR CTRL is enabled and the rear audio mode is the same as the front. (SPEAKER CONTROL) button: Press this button to turn the rear speakers off and headphones on.
WARNING ● The DVD Entertainment System is de- signed for rear seat passenger viewing only. ● The driver must not attempt to operate the DVD Entertainment System while the vehicle is in motion so that full at- tention may be given to vehicle operation.
1. EJECT button 2. DVD slot 3. ENTER button 4. POWER on/off button 5. MODE button 6. Input jacks 7. ST OP button 8. PLA Y/P AUSE button 9. MENU button 10. DISPLA Y button 11. NA VIGA TION keys DIGITAL VIDEO DISC (DVD) PLAYER CONTROLS Refer to “Playing a digital video disc (DVD)” later in this section for the function of each button.
6. DISPLA Y button 7. MODE button 8. SUBTITLE button 9. AUDIO button 10. ANGLE button 11. CLEAR button 12. P AUSE button 13. PLA Y button 14. F AST FORW ARD/F AST REVERSE button 15.
Headphones Power ON/OFF: Press the power button to turn the headphones on or off. V olume control: T urn the volume control knob to adjust the vol- ume. The headphones will automatically be turned off in 30 seconds if there is no sound during that period.
Pressing the button on the front controls turns the rear speakers on and off. It is possible to operate the DVD player by remote control. Headphones are a wireless type and no cables are necessary . Y ou can use them in almost all the ranges in the rear seat.
ST OP: Press the ST OP button once to stop playing the media. The display will show in the upper left corner of the display for 4 seconds, and the last disc position will be stored. When the PLA Y button is pressed again, it will resume at the stored disc track and time position.
MENU: If the media is in PLA Y mode and the MENU button is pressed, the DVD menu will appear on the screen. Use Navigation K eys to navigate within the menu, and use ENTER to select the item.
CARE AND MAINTENANCE Use a lightly dampened, lint free cloth to clean the surfaces of your DVD Entertainment System. (DVD player face, screen, remote control, etc.) CAUTION ● Do not use any solvents or cleaning solutions when cleaning the video system.
DVD player operation precautions Do not use the following DVDs as they may cause the DVD player to malfunction: ● 3.1 in (8 cm) disc s with an adapter. ● DVDs with a region code other than “1” . The region code 䊊 A is displayed in a small symbol printed on the top of the DVD 䊊 B .
Remote control and headphones battery replacement Replace the battery as follows: 1. Open the lid. 2. Replace batteries with new ones. ● Size AA (remote control) ● Size AAA (headphones) Make sure that the and ends on the batteries match the markings inside the compartment.
When installing a CB, ham radio or car phone in your NISSAN, be sure to observe the following precautions; otherwise, the new equipment may adversely affect the engine control system and other electronic parts. WARNING ● A cellular telephone should not be used while driving so full attention may be given to vehicle operation.
Y our NISSAN is equipped with the Bluetooth 姞 Hands-Free Phone System. If you have an ap- proved Bluetooth 姞 enabled cellular phone, you can set up the wireless connection between your cellular phone and the in-vehicle phone module.
– Y our cellular phone is locked to prevent it from being dialed. ● When the radio wave condition is not ideal or ambient sound is too loud, it may be difficult to hear the other person’s voice dur- ing a call.
● If a command is not recognized, the system announces, “Command not recognized. Please try again.” Repeat the command in a clear voice. ● If you want to go back to the previous com- mand, you can say “Go back” or “Correc- tion” any time the system is waiting for a response.
● Y ou can say “star” for “*” and “pound” for “#” at any time in any position of the phone number (available only when using Call In- ternational command) . See “List of voice commands” and “Interna- tional” later in this section for more informa- tion.
3. Press the button. For information on speaker adaptation, see “Speaker adaptation (SA) mode” later in this section. 4. The system announces the current language and gives you the option to change the lan- guage to Spanish (in Spanish) or French (in French) .
6. The system asks you to assign a priority level 䊊 F . The priority level determines which phone is active when more than one paired Bluetooth 姞 phone is in the vehicle. Follow the instructions provided by the system or refer to “Setup” later in this section for more information on changing priorities.
end the VR session. Whenever the VR session is cancelled, a double beep is played to indicate you have exited the system. If you want to go back to the previous command, you can say “Go back” or “Correction” any time the system is waiting for a response.
During a call During a call there are several command options available. Press the button on the steering wheel to mute the receiving voice and enter com- mands. ● “Help” — The system announces the avail- able commands. ● “Go back/Correction” — The system an- nounces “Go back,” ends the VR session and returns to the call.
Also, if the name sounds too much like a name already stored, the system tells you, then prompts you for a name again. Once the system accepts the name and you confirm it is correct, the system asks for a location (Home, Office, Mobile or Other) . For example, say: “Home.
T o delete entries from the phone book, say a name or “ All entries” when prompted by the sys- tem. The system acknowledges the command and asks you to confirm the deletion. T o delete the current redial number or call back number, say “redial number” or “call back num- ber” when prompted by the system.
NO TE: The pairing procedure must be performed when the vehicle is stationary. If the vehicle starts moving during the procedure, the procedure will be cancelled. Also, see “Pairing procedure” earlier in this section for additional information. Up to 5 phones can be paired.
NO TE: When you delete a phone, the associated phone book for that phone will also be deleted. “Select ringtone” 䊊 F Use the Select Ringtone command to select the tone heard in the vehicle when an incoming call is received.
11. The system will announce that speaker ad- aptation has been completed and the sys- tem is ready . The SA mode will stop if: ● The button is pressed for more than 5 seconds in SA mode. ● The vehicle begins moving during SA mode. ● The ignition switch is turned to the OFF or L OCK position.
T ROUBLESHOOTING GUIDE The system should respond correctly to all voice commands without difficulty . If problems are en- countered, try the following solutions. Where the solutions are listed by number, try each solution in turn, starting with number 1, until the problem is resolved.
5 Starting and driving Precautions when starting and driving ................5 - 2 Exhaust gas (carbon monoxide) ..................5 - 2 Three-way catalyst ..............................5 - 2 Tire Pressure Monitoring System (TPMS) ..........5 - 3 Avoiding collision and rollover .
WARNING ● Do not leave children or adults who would normally require the assistance of others alone in your vehicle. Pets should also not be left alone. They could accidentally injure themselves or others through inadvertent operation of the vehicle.
CAUTION ● Do not use leaded gasoline. Deposits from leaded gasoline will seriously re- duce the three-way catalyst’s ability to help reduce exhaust pollutants. ● Keep your engine tuned up. Malfunc- tions in the ignition, fuel injection, or electrical systems can cause overrich fuel flow into the three-way catalyst, causing it to overheat.
● The low tire pressure warning light does not automatically turn off when the tire pressure is adjusted. After all 4 tires are inflated to the recommended pressure, the vehicle must be driven at speeds above 16 MPH (25 km/h) to activate the TPMS and turn off the low tire pressure warning light.
Some examples are: – Facilities or electric devices using similar radio frequencies are near the vehicle. – If a transmitter set to similar frequencies is being used in or near the vehicle. – If a computer (or similar equipment) or a DC/AC converter is being used in or near the vehicle.
● If you decide that it is not safe to return the vehicle to the road surface based on vehicle, road or traffic conditions, gradually slow the vehicle to a stop in a safe place off the road. RAPID AIR PRESSURE LOSS Rapid air pressure loss or a “blow-out” can occur if the tire is punctured or is damaged due to hitting a curb or pothole.
WARNING ● Never remove or turn the key to the LOCK position while driving. The steer- ing wheel will lock. This may cause the driver to lose control of the vehicle and could result in serious vehicle damage or personal injury. ● Never turn the ignition switch to the LOCK position while driving.
K EY POSITIONS L OCK: Normal parking position (0) OFF: (Not used) (1) ACC: (Accessories) (2) This position activates electrical accessories such as the radio when the engine is not running. ON: Normal operating position (3) This position turns on the ignition system and the electrical accessories.
1. Apply the parking brake. 2. Move the shift selector to P (Park) or N (Neutral) . P (Park) is recommended. The shift selector cannot be moved out of P (Park) and into any of the other gear positions if the ignition key is turned to the OFF position or if the key is removed from the ignition switch.
The recommended operating procedures for this transmission are shown on the following pages. Follow these procedures for maximum vehicle performance and driving enjoyment. Starting the vehicle 1. After starting the engine, fully depress the foot brake pedal before moving the shift selector out of the P (Park) position.
P (Park) : CAUTION T o prevent transmission damage, use the P (Park) or R (Reverse) position only when the vehicle is completely stopped. Use the P (Park) shift selector position when the vehicle is parked or when starting the engine. Make sure the vehicle is completely stopped.
T o push the shift lock release, complete the fol- lowing procedure: 1. T urn the ignition switch to the LOCK posi- tion and remove the key 2. Apply the parking brake. 3. Remove the shift lock release cover as shown. 4. Insert a small screwdriver in the shift lock release slot and push down.
OFF: For driving up and down long slopes where engine braking is nec- essary push the Overdrive switch once. The O/D OFF indicator light in the instrument panel comes on at this time. When cruising at a low speed or climbing a gentle slope, you may feel uncomfortable shift shocks as the transmission shifts into and out of Overdrive repeatedly .
1. ACCEL/RES switch 2. COAST/SET switch 3. CANCEL switch 4. ON·OFF switch PRECAUTIONS ON CRUISE CONTROL ● If the cruise control system malfunctions, it cancels automatically . The SET indicator light in the instrument panel then blinks to warn the driver.
● the vehicle slows down more than 8 MPH (13 km/h) below the set speed. ● you move the shift selector lever to N (Neu- tral) . T o reset at a faster cruising speed, use one of the following three methods. ● Depress the accelerator pedal. When the vehicle attains the desired speed, push and release the COAST/SET switch.
● Accelerate slowly and smoothly . Maintain cruising speeds with a constant accelerator position. ● Drive at moderate speeds on the highway . Driving at high speed lowers fuel economy . ● Avoid unnecessary stopping and braking. Maintain a safe distance behind other ve- hicles.
WARNING ● Do not stop or park the vehicle over flammable materials such as dry grass, waste paper or rags. They may ignite and cause a fire. ● Safe parking procedures require that both the parking brake be set and the transmission placed into P (Park) .
The power assisted steering uses a hydraulic pump, driven by the engine, to assist steering. If the engine stops or the drive belt breaks, you will still have control of the vehicle. However, much greater steering effort is needed, especially in sharp turns and at low speeds.
Parking brake break -in Break -in the parking brake shoes whenever the stopping effect of the parking brake is weakened or whenever the parking brake shoes and/or drum/rotors are replaced, in order to assure the best brake performance. This procedure is described in the vehicle service manual and can be performed by a NISSAN dealer.
Self-test feature The ABS includes electronic sensors, electric pumps, hydraulic solenoids and a computer. The computer has a built-in diagnostic feature that tests the system each time you start the engine and move the vehicle at a low speed in forward or reverse.
● When driving on extremely inclined sur- faces such as higher banked corners, the T raction Control System may not operate properly and the indica- tor light may come on.
● Do not modify the vehicle’s suspension. If suspension parts such as shock ab- sorbers, struts, springs, stabilizer bars, bushings and wheels are not NISSAN approved for your vehicle or are ex - tremely deteriorated the V ehicle Dy- namic Control system may not operate properly.
● The system is designed as an aid to the driver in detecting large stationary ob- jects to help avoid damaging the ve- hicle. The system will not detect small objects below the bumper, and may not detect objects close to the bumper or on the ground.
DRAINING OF COOLANT WATER If the vehicle is to be left outside without anti- freeze, drain the cooling system, including the engine block. Refill before operating the vehicle. For details, see “Changing engine coolant” in the “Maintenance and do-it-yourself” section of this manual.
ENGINE BLOCK HEATER (if so equipped) WARNING ● Do not use your engine block heater with an ungrounded electrical system or a 2-pronged adapter. Y ou can be se- riously injured by an electrical shock if you use an ungrounded connection. ● Disconnect and properly store the en- gine block heater cord before starting the engine.
5-26 Starting and driving MEMO.
6 In case of emergency Flat tire ...........................................6 - 2 Tire Pressure Monitoring System (TPMS) ..........6 - 2 Changing a flat tire .............................6 - 2 Jump starting . . . ..................................6 - 7 Push starting .
TIRE PRESSURE MONITORING SYSTEM (TPMS) This vehicle is equipped with the Tire Pressure Monitoring System (TPMS) . It monitors tire pres- sure of all tires except the spare. When the low tire pressure warning light is lit, one or more of your tires is significantly under-inflated.
WARNING ● Make sure the parking brake is securely applied and the automatic transmission is shifted into P (Park) . ● Never change tires when the vehicle is on a slope, ice or slippery areas. This is hazardous. ● Never change tires if oncoming traffic is close to your vehicle.
3. Stow the center tray table (if so equipped) . 4. Move both front seats as forward as pos- sible. 5. Lift up the floor carpeting 䊊 1 . Remove the spare tire cover 䊊 2 and jack tool kit. 6. T urn the retainer counterclockwise and re- move the spare tire.
● Use the correct jack -up points. Never use any other part of the vehicle for jack support. ● Never jack up the vehicle more than necessary. ● Never use blocks on or under the jack. ● Do not start or run the engine while vehicle is on the jack.
Installing the spare tire The spare tire is designed for emergency use. See specific instructions under the heading “ Wheels and tires” in the “Mainte- nance and do-it-yourself” section of this manual. 1. Clean any mud or dirt from the surface be- tween the wheel and hub.
● The spare tire is designed for emer- gency use. See specific instructions un- der the heading “ Wheels and tires” in the “Maintenance and do-it-yourself” section of this manual. T o start your engine with a booster battery, the instructions and precautions below must be fol- lowed.
WARNING Always follow the instructions below. Failure to do so could result in damage to the charging system and cause personal injury. 1. If the booster battery is in another vehicle, position the two vehicles to bring their bat- teries near each other.
WARNING Do not push start this vehicle. The three- way catalyst may be damaged. CAUTION Automatic transmission models cannot be push-started or tow-started.
6. After the engine cools down, check the cool- ant level in the engine coolant reservoir tank with the engine running. Add coolant to the engine coolant reservoir tank if necessary . Have your vehicle repaired at a NISSAN dealer. When towing your vehicle, all State (Provincial in Canada) and local regulations for towing must be followed.
T OWING RECOMMENDED BY NISSAN NISSAN recommends that your vehicle be towed with the driving (front) wheels off the ground or place the vehicle on a flat bed truck as illustrated.
CAUTION ● T ow chains or cables must be attached only to the main structural members of the vehicle or the towing hooks (if so equipped) . Otherwise, the vehicle body will be damaged. ● Use the towing hook (if so equipped) only to free a vehicle stuck in sand, snow, mud, etc .
7 Appearance and care Cleaning exterior ..................................7 - 2 W ashing ......................................7 - 2 W axing ........................................7 - 2 Removing spots ................................7 - 3 Underbody .
In order to maintain the appearance of your ve- hicle, it is important to take proper care of it. T o protect the paint surfaces, please wash your vehicle as soon as you can: ● after a rainfall to prevent possible damage from acid rain. ● after driving on coastal roads.
REMOVING SPOTS Remove tar and oil spots, industrial dust, insects, and tree sap as quickly as possible from the surface of the paint to avoid lasting damage or staining. Special cleaning products are available at a NISSAN dealer or any automotive accessory store.
Occasionally remove loose dust from the interior trim, plastic parts and seats using a vacuum cleaner or soft bristled brush. Wipe the vinyl and leather surfaces with a clean, soft cloth damp- ened in mild soap solution, then wipe clean with a dry , soft cloth.
Floor mat positioning aid (driver’s side only) This vehicle includes a front floor mat bracket to act as a floor mat positioning aid. NISSAN floor mats have been specially designed for your ve- hicle model. The driver’s side floor mat has a grommet hole incorporated in it.
T emperature High temperatures accelerate the rate of corro- sion to those parts which are not well ventilated. Air pollution Industrial pollution, the presence of salt in the air in coastal areas, or heavy road salt use acceler- ates the corrosion process.
8 Maintenance and do-it-yourself Maintenance requirements ..........................8 - 2 General maintenance ..............................8 - 2 Explanation of general maintenance items .........8 - 2 Maintenance precautions . . . ...................
Y our new NISSAN has been designed to have minimum maintenance requirements with long service intervals to save you both time and money . However, some day-to-day and regular maintenance is essential to maintain your NIS- SAN’s good mechanical condition, as well as its emission and engine performance.
When driving in areas using road salt or other corrosive materials, check lubrication frequently . Lights* Clean the headlights on a regular basis. Make sure that the headlights, stop lights, tail lights, turn signal lights, and other lights are all operating properly and installed securely .
Steering wheel Check for changes in the steer- ing system, such as excessive freeplay , hard steering or strange noises. Warning lights and chimes Make sure all warning lights and chimes are operating properly. Windshield wiper and washer* Check that the wipers and washer operate properly and that the wipers do not streak.
When performing any inspection or maintenance work on your vehicle, always take care to prevent serious accidental injury to yourself or damage to the vehicle.
1. P ower steering fluid reservoir 2. Engine oil filler cap 3. Air cleaner 4. Brake fluid reservoir 5. Battery 6. Fuse/fusible link box 7. T ransmission dipstick 8. Engine oil dipstick 9. Radiator cap 10. Drive belt location 11. Fuse block 12. Windshield washer fluid reservoir 13.
The engine cooling system is filled at the factory with Genuine NISSAN Long Life Antifreeze/Coolant to provide year-round anti- freeze and coolant protection. The anti-freeze solution contains rust and corrosion inhibitors. Additional engine cooling system additives are not necessary .
CHANGING ENGINE COOLANT A NISSAN dealer can change the engine coolant. The service procedure can be found in the NISSAN Service Manual. Improper servicing can result in reduced heater performance and engine overheat- ing. WARNING ● T o avoid the danger of being scalded, never change the coolant when the en- gine is hot.
CAUTION Oil level should be checked regularly. Op- erating the engine with an insufficient amount of oil can damage the engine, and such damage is not covered by warranty. CHANGING ENGINE OIL 1. Park the vehicle on a level surface and apply the parking brake.
7. Refill engine with recommended oil through the oil filler opening, then install the oil filler cap securely . See “Capacities and recommended fuel/lubricants” in the “T echnical and con- sumer information” section of this manual for drain and refill capacity .
When checking or replacement is required, we recommend your NISSAN dealer for servicing. CAUTION ● Use only Genuine NISSAN Matic K A TF . Do not mix with other fluids.
For further brake fluid specification information, refer to “Capacities and recommended fuel/lubricants” in the “T echnical and consumer information” section of this manual. WARNING ● Use only new fluid from a sealed con- tainer. Old, inferior or contaminated fluid may damage the brake system.
Refill the reservoir more frequently when driving conditions require an increased amount of win- dow washer fluid. Recommended fluid is Genuine NISSAN Wind- shield W asher Concentrate Cleaner & Anti- freeze or equivalent. CAUTION ● Do not substitute engine anti-freeze coolant for window washer solution.
1. Remove the battery caps with a screwdriver as shown. Use a cloth to protect the battery case. 2. Check the fluid level in each cell. If it is necessary to add fluid, add only distilled water to bring the level up to the bottom of the filler opening.
1. P ower steering fluid pump 2. Generator 3. Air conditioner compressor 4. Crankshaft pulley WARNING Be sure the ignition switch is in the OFF or LOCK position before servicing drive belt. The engine could rotate unexpectedly. 1. Visually inspect the belt for signs of unusual wear, cuts, fraying or looseness.
WARNING Be sure the engine and ignition switch are off and that the parking brake is engaged securely. CAUTION Be sure to use the correct socket to re- move the spark plugs. An incorrect socket can damage the spark plugs. If replacement is required, see your NISSAN dealer for assistance.
CLEANING If your windshield is not clear after using the windshield washer or if a wiper blade chatters when running, wax or other material may be on the blade or windshield. Clean the outside of the windshield with a washer solution or a mild detergent.
Be careful not to let anything get into the washer nozzle 䊊 A . This may cause clogging or improper windshield washer operation. If something gets into the nozzle, remove it with a needle or small pin 䊊 B .
Rear window wiper blade 䊊 1 Lift the wiper arm away from the rear win- dow . 䊊 2 Push the wiper blade in and pivot until the blade becomes free. 䊊 3 Insert a new blade onto the wiper arm and snap into place.
If the brakes do not operate properly , have the brakes checked by a NISSAN dealer. SELF-ADJUSTING BRAKES Y our vehicle is equipped with self-adjusting brakes.
3. Remove the fuse box cover by pushing the tab and lifting the cover up. 4. Remove the fuse with the fuse puller. The fuse puller is located in the center of the fuse block in the passenger compartment. 5. If the fuse is open 䊊 A , replace it with a new fuse 䊊 B .
3. Pull up on the sunglasses holder 䊊 2 and remove to expose the fuse panel. 4. Remove the fuse with the fuse puller. 5. If the fuse is open 䊊 A , replace it with an equivalent good fuse 䊊 B . 6. Push the fuse box cover to install. 7. If a new fuse also opens, have the electrical system checked and repaired by a NISSAN dealer.
CAUTION Be careful not to allow children to swallow the battery or removed parts. K EYFOB Replace the battery in the keyfob as follows: 䊊 1 Open the lid using a coin 䊊 A . 䊊 2 Remove the battery 䊊 B . 䊊 3 Install a new battery 䊊 C with the “+” facing down.
● Do not touch the internal circuit and electric terminals as it could cause a malfunction. Recommended battery: CR2025 or equivalent. 䊊 4 Close the lid securely . 5. Press the button, then the button two or three times to check the key- fob operation.
Fog may temporarily form inside the lens of the exterior lights in the rain or in a car wash. A temperature difference between the inside and the outside of the lens causes the fog. This is not a malfunction. If large drops of water collect inside the lens, contact a NISSAN dealer.
EXTERIOR AND INTERIOR LIGHTS Item W attage (W) Bulb No. Headlight assembly High 60 HB3/9005 Low* 51 HB4/9006 Park/T urn* 8/29 3457 Cornering* 27 3156 Front fog light 55 H11 Puddle lamp* 8 — Room/map lights 8 PL W 578 Personal lights T ype A 8 2GL T2P T ype B 8 TS578 Footwell 3.
1. Room/map light 2. Front personal lights 3. Step light 4. Puddle lamp 5. High-mounted stoplight 6. Cargo light 7. License plate light 8. Rear combination light 9. Headlight assembly 10. Fog light Replacement procedures All other lights are either type A , B, C or D.
Use a cloth 䊊 1 to protect the housing. Use a cloth 䊊 1 to protect the housing. Use a cloth 䊊 1 to protect the housing. Room/map lights LDI0517 Personal lights – T ype A LDI0364 Personal light.
Use a cloth 䊊 1 to protect the housing. Use a cloth 䊊 1 to protect the housing. Step light LDI0341 Cargo light LDI0366 Rear combination light LDI0367 Maintenance and do-it-yourself 8-29 墌 REVIEW.
If you have a flat tire, see the “In case of emergency” section of this manual. TIRE PRESSURE Tire Pressure Monitoring System (TPMS) This vehicle is equipped with the Tire Pressure Monitoring System (TPMS) . It monitors tire pressure of all tires except the spare.
WARNING ● Improperly inflated tires can fail suddenly and cause an accident. ● The Gross V ehicle Weight Rating (GVWR) is located on the F .M .V .S.S./C .M .V .S.S. certifica- tion label. The vehicle weight ca- pacity is indicated on the Tire and Loading Information label (if so equipped) .
Tire and loading information label 䊊 1 Seating capacity: The maximum num- ber of occupants that can be seated in the vehicle. 䊊 2 V ehicle load limit: See loading infor- mation in the “T echnical and con- sumer information” section. 䊊 3 Original tire size: The size of the tires originally installed on the vehicle at the factory .
Checking tire pressure 1. Remove the valve stem cap from the tire. 2. Press the pressure gauge squarely onto the valve stem. Do not press too hard or force the valve stem side- ways or air will escape. If the hissing sound of air escaping from the tire is heard while checking the pressure, reposition the gauge to eliminate this leakage.
䊊 1 Tire size (example: P215/65R15 95H) 1. P: The “P” indicates the tire is de- signed for passenger vehicles (not all tires have this information) . 2. Three-digit number (215): This num- ber gives the width in millimeters of the tire from sidewall edge to side- wall edge.
䊊 2 TIN (Tire Identification Number) for a new tire (example: DO T XX XX XXX XXXX) 1. DO T : Abbreviation for the “Depart- ment Of T ransportation” The symbol can be placed above, below or to the left or right of Tire Identification Num- ber. 2.
䊊 7 The word “radial” The word “radial” is shown if the tire has radial structure. 䊊 8 Manufacturer or brand name Manufacturer or brand name is shown.
For additional traction on icy roads, studded tires may be used. However, some U.S. states and Canadian provinces prohibit their use. Check local, state and provincial laws before installing studded tires. Skid and traction capabilities of studded snow tires on wet or dry surfaces may be poorer than that of non-studded snow tires.
Wheel nut tightening torque: 83 ft-lb (112 N·m) The wheel nuts must be kept tight- ened to specifications at all times. It is recommended that wheel nuts be tightened to specification at each tire rotation interval. WARNING ● After rotating the tires, check and adjust the tire pressure.
Replacing wheels and tires When replacing a tire, use the same size, tread design, speed rating and load carrying capacity as originally equipped. Recommended types and sizes are shown in “Wheels and tires” in the “T echnical and consumer information” section of this manual.
● For additional information regarding tires, refer to “Important Tire Safety Information” (US) or “Tire Safety Infor- mation” (Canada) in the Warranty In- formation Booklet. Care of wheels ● W ash the wheels when washing the vehicle to maintain their appearance.
9 T echnical and consumer information Capacities and recommended fuel/lubricants .........9 - 2 Fuel recommendation . . . ........................9 - 3 Engine oil and oil filter recommendations ..........9 - 5 Air conditioner system refrigerant and oil recommendations .
The following are approximate capacities. The actual refill capacities may be slightly different. When refilling, follow the procedure described in the “Maintenance and do-it-yourself” section to determine the proper refill capacity. Capacity (Approximate) Recommended Fluids and Lubricants US measure Imp measure Liter Fuel 20 gal 16-5/8 gal 75.
FUEL RECOMMENDATION Use unleaded premium gasoline with an octane rating of at least 91 AKI (Anti-Knock Index) num- ber (Research octane number 96) . If unleaded premium gasoline is not available unlea.
If any driveability problems such as engine stall- ing and difficult hot-starting are experienced after using oxygenate-blend fuels, immediately change to a non-oxygenate fuel or a fuel with a low blend of MTBE. T ake care not to spill gasoline during refu- eling.
ENGINE OIL AND OIL FILTER RECOMMENDATIONS Selecting the correct oil It is essential to choose the correct grade, quality and viscosity engine oil to ensure satisfactory engine life and performance. See “Capacities and recommended fuel/lubricants” earlier in this section.
Y our engine was filled with a high-quality engine oil when it was built. Y ou do not have to change the oil before the first recommended change interval.
ENGINE Model VQ35DE T ype Gasoline, 4-cycle, DOHC Cylinder arrangement 6-cylinder, V-block, Slanted at 60° Bore x Stroke in (mm) 3.760 x 3.205 (95.5 x 81.4) Displacement cu in (cm 3 ) 213.5 (3,498) Firing order 1–2–3–4–5–6 Idle speed No adjustment is necessary.
WHEELS AND TIRES Wheels 16 x 6.5JJ 17 x 6.5JJ Tires P225/65R16 P225/60R17 Spare tire T135/80*16 Speed rating 16” H 17” H *: “R” or “D” depending on tire manufacturer DIMENSIONS AND WEIGHTS Overall length in (mm) 204.1(5,185) Overall width in (mm) 78.
When planning to drive your NISSAN ve- hicle in another country, you should first find out if the fuel available is suitable for your vehi- cle’s engine. Using fuel with an octane rating that is too low may cause engine damage. All gasoline vehicles must be operated with unleaded gasoline.
ENGINE SERIAL NUMBER The number is stamped on the engine as shown. F .M.V .S.S./C.M.V .S.S. CERTIFICATION LABEL The Federal/Canadian Motor V ehicle Safety Standard (F .
TIRE AND LOADING INFORMATION LABEL The cold tire pressure is shown on the Tire and Loading Information label. The label is located as shown. AIR CONDITIONER SPECIFICATION LABEL The air conditioner specification label is affixed to the underside of the hood as shown.
Use the following steps to mount the front license plate: 䊊 1 Make holes on the plastic finisher at the location mark (small dimple) using a 0.31 in (8 mm) drill. Apply light pressure to the drill. Install the license plate holder using the two screws provided with the holder.
● V ehicle Capacity W eight, Load limit, T otal load capacity - maximum total weight limit specified of the load (passengers and cargo) for the ve- hicle. This is the maximum combined weight of occupants and cargo that can be loaded into the vehicle.
Steps for determining correct load limit 1. Locate the statement “The combined weight of occupants and cargo should never exceed XXX kg or XXX lbs” on your vehicle’s placard. 2. Determine the combined weight of the driver and passengers that will be riding in your vehicle.
5. Determine the combined weight of luggage and cargo being loaded on the vehicle. That weight may not safely exceed the available cargo and luggage load capacity calculated in Step 4. 6. If your vehicle will be towing a trailer, load from your trailer will be trans- ferred to your vehicle.
WARNING Overloading or improper loading of a trailer and its cargo can adversely affect vehicle handling, braking and perfor- mance and may lead to accidents. CAUTION ● Do not tow a trailer or haul a heavy load for the first 500 miles (800 km) . Y our engine, axle or other parts could be damaged.
T emperature conditions can also affect towing. For example, towing a heavy trailer in high outside temperatures on graded roads can affect engine performance and cause overheating. The engine protection mode, which helps reduce the chance of engine damage, could activate and automati- cally decrease engine power.
T owing capacities are calculated assuming a base vehicle with driver and any options required to achieve the rating. Additional passengers, cargo and/or optional equipment, such as the trailer hitch, will add weight to the vehicle and reduce your vehicle’s maximum towing capacity and trailer tongue load.
The available towing capacity may be less than the maximum towing capacity due to the passen- ger and cargo load in the vehicle. Remember to keep trailer tongue weight be- tween 10 - 15% of the trailer weight or within the trailer tongue load specification recommended by the trailer manufacturer.
Class I hitch Class I trailer hitch equipment (receiver, ball mount and hitch ball) can be used to tow trailers of a maximum weight of 2,000 lb (909 kg) . Class II hitch Class II trailer hitch equipment (receiver, ball mount and hitch ball) can be used to tow trailers of a maximum weight of 3,500 lb (1,510 kg) .
T railer brakes When towing a trailer load of 3,500 lbs. (1587 kg) or more, trailers with a brake system MUST be used. However, most states require a separate braking system on trailers with a loaded weight above a specific amount. Make sure the trailer meets the local regulations and the regulations where you plan to tow .
● When backing up, hold the bottom of the steering wheel with one hand. Move your hand in the direction in which you want the trailer to go. Make small corrections and back up slowly . If possible, have someone guide you when you are backing up. Always block the wheels on both vehicle and trailer when parking.
2. When the trailer sway stops, gently apply the brakes and pull to the side of the road in a safe area. 3. T ry to rearrange the trailer load so it is bal- anced as described earlier in this section. ● Be careful when passing other vehicles. Passing while towing a trailer requires con- siderably more distance than normal pass- ing.
DO T (Department of T ransportation) Quality Grades: All passenger car tires must conform to federal safety requirements in addition to these grades. Quality grades can be found where applicable on the tire sidewall between tread shoulder and maximum section width.
Y our NISSAN vehicle is covered by the following emission warranties: For USA 1. Emission Defects W arranty 2. Emissions Performance W arranty Details of this warranty may be found with other vehicle warranties in your W arranty Information Booklet which comes with your NISSAN vehicle.
WARNING Always drive the vehicle in a safe and prudent manner according to traffic con- ditions and obey all traffic laws. 1. Start the engine when the engine coolant temperature gauge needle points to C. Al- low the engine to idle until the gauge needle points between the C and H (normal oper- ating temperature) .
the type of personally identifying data routinely acquired during a crash investigation. T o read data recorded by an EDR, special equip- ment is required and access to the vehicle or the EDR is needed.
Using Genuine NISSAN Parts can help protect your personal safety , preserve your warranty pro- tection and maintain the resale value of your vehicle. And if your vehicle was leased, using Genuine NISSAN Parts may prevent or limit un- necessary excess wear and tear expenses at the end of your lease.
10 Index A Active Head Restraint .............. 1 - 8 Adjusting pedal position ............ 3 - 2 1 Air bag (See supplemental restraint s y s t e m ) ..................... 1 - 5 3 Air bag system Front (See supplemental front impact air bag system) ...
CD player (See audio system) ......... 4 - 5 5 Child restraint with top tether strap ...... 1 - 3 1 Child restraints .......... 1 - 1 9 , 1 - 2 7 , 1 - 2 9 Precautions on child r e s t r a i n t s ............ 1 - 2 7 , 1 - 4 2 , 1 - 4 8 T op tether strap anchor point locations .
F Flashers (See hazard warning flasher switch) ...... 2 - 2 3 Flat tire ...................... 6 - 2 Floor mat positioning aid ............. 7 - 5 Fluid Brake fluid .................. 8 - 1 2 Capacities and recommended f u e l / l u b r i c a n t s ..
Keyless entry system (See remote keyless entry system) ....... 3 - 9 L Labels Air conditioner specification label ..... 9 - 1 1 C.M.V .S.S. certification label ........ 9 - 1 0 Emission control information label ..... 9 - 1 0 Engine serial number ....
Engine oil and oil filter recommendation . .9-5 Engine oil viscosity .............. 9 - 5 Overdrive switch ................ 5 - 1 2 Overheat I f y o u r v e h i c l e o v e r h e a t s ........... 6 - 9 Owner’s manual order form .......... 9 - 2 7 Owner’s manual/service manual order information .
Security system (NISSAN vehicle immobilizer system) , engine start ......... 2 - 1 5 , 3 - 2 , 5 - 8 Self-adjusting brakes .............. 8 - 2 0 Service manual order form ........... 9 - 2 7 Servicing air conditioner ............ 4 - 4 5 Setting button .
Tire rotation maintenance reminder ............... 4 - 5 , 4 - 1 1 , 4 - 2 2 T op tether strap child restraint ......... 1 - 3 1 T owing F l a t t o w i n g .................. 9 - 2 3 T o w t r u c k t o w i n g .............. 6 - 1 0 T owing load/specification .
RECOMMENDED FUEL: Use unleaded regular gasoline with an octane rating of at least 87 AKI (Anti-Knock Index) num- ber (Research octane number 91) . NISSAN recommends the use of premium un- leaded gasoline with an octane rating of at least 91 AKI number (Research octane number 96) .
Een belangrijk punt na aankoop van elk apparaat Nissan 2009 Quest (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Nissan 2009 Quest heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Nissan 2009 Quest vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Nissan 2009 Quest leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Nissan 2009 Quest krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Nissan 2009 Quest bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Nissan 2009 Quest kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Nissan 2009 Quest . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
