Gebruiksaanwijzing /service van het product Regulator Equipment van de fabrikant Oceanic
Ga naar pagina of 20
.
2 Oceanic Regulator Pay special attention to items marked with this Warning Symbol. WARNINGS: This Regulator product is intended for use by recreational divers who have successfully completed a nationally recognized course in scuba diving.
3 Owner's Guide CONTENTS W ARNINGS ................................................................................................... 2 NOTICES AND W ARRANTY ......................................................................... 2 INTRODUCTION .
4 Oceanic Regulator INTRODUCTION STATEMENT FOR OCEANIC REGULATOR EQUIPMENT COMPATIBILITY AND USE WITH NITROX WARNINGS: Oceanic Regulators are not intended to be used by untrained per- sons who may not know the inherent risks and hazards of SCUBA diving.
5 Owner's Guide NOTE: The term breathing gas used throughout this owner's guide applies to enriched nitrogen-oxygen (Nitrox) mixtures as well as compressed Air. When using Air with this regulator equipment, the Air used must meet EN132 Annex A standards.
6 Oceanic Regulator REGULATOR FIRST STAGES WARNING: Failure to prepare your First Stage properly for use in harsh environmental conditions, such as being subjected to sedi- ment or the possible buildup of ice, or salt crystals, may result in serious injury or death.
7 Owner's Guide REMOVAL OF HOSES WARNING: At least one second stage must be connected to the first stage to facilitate purging of breathing gas from the first stage. DATALINK WARNING: Proper installation of the DataLink is essential for it to function properly.
8 Oceanic Regulator NOTE: Once the DataLink has been disconnected, the regulator system can again be pressurized. REGULATOR ATTACHMENT TO A TANK WARNING: Maximum working pressure for an Oceanic Yoke s.
9 Owner's Guide DIN WHEEL STYLE CONNECTOR.
10 Oceanic Regulator DIN TO USA CONVERTER YOKE WARNING: The DIN to USA Converter is specifically designed for use with Oceanic brand first stages. Although it may fit other brand first stages, it was not designed to do so or tested for use with other brands.
11 Owner's Guide ENVIRONMENTAL PROTECTION KIT WARNING: Installation of an Environmental Kit must be per- formed by an Authorized Oceanic Dealer. Improper installation may cause first stage failure while underwater resulting in serious injury or death.
12 Oceanic Regulator Alpha 7, Gamma, Pony Bottle, and Explorers (Primary and Octopus) NOTE: If these second stages are shipped from the factory spe- cifically as an Octopus, the inhalation effort is set slightly higher to reduce sensitivity.
13 Owner's Guide Delta 3 Adjustment Knob (on side): Guidelines for Delta 3adjustments (knob on side): NOTE: Rotation of the Delta 3 adjustment knob does not rotate the poppet seat against the sealing orifice.
14 Oceanic Regulator.
15 Owner's Guide NOTE: Due to the Zeta's servo design, a hiss may be heard upon being pressurized. This is normal for the Zeta..
16 Oceanic Regulator CARE AND MAINTENANCE TRANSPORT and STORAGE POST DIVE CARE REPAIRS and SERVICE WARNING: DO NOT attempt to disassemble or repair the first or second stages, or to adjust the first stage. Doing so could cause malfunction while underwater resulting in serious injury or death.
17 Owner's Guide ADDITIONAL SPECIFICATIONS FOR CONNECTING COMPONENTS TO OCEANIC REGULATOR FIRST STAGES Second Stage (Primary or Octopus): Pressure Gauge or Pressure Transmitter:.
18 Oceanic Regulator GUIDELINE FOR OCEANIC REGULA TOR EQUIPMENT MINIMUM SERVICE INTERV A L S.
19 Owner's Guide INSPECTIONS / SERVICE Date Service Authorized Dealer / Technician RECORDS First Stage Model ________________________________ First Stage Serial# ________________________________ .
20 Oceanic Regulator © 2002 Design, 1996 Doc. No. 12-2018-r08 (6/22/06) OCEANIC WORLD WIDE OCEANIC USA 2002 Davis S treet San Leandro, CA 94577 T el: 510/562-0500 Fax: 510/569-5404 W eb site: http://www.
Een belangrijk punt na aankoop van elk apparaat Oceanic Regulator Equipment (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Oceanic Regulator Equipment heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Oceanic Regulator Equipment vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Oceanic Regulator Equipment leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Oceanic Regulator Equipment krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Oceanic Regulator Equipment bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Oceanic Regulator Equipment kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Oceanic Regulator Equipment . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
