Gebruiksaanwijzing /service van het product Protect 6030 van de fabrikant Olympia
Ga naar pagina of 36
R Protect 6XXX Series Wireless Alarm System Instruction Manual 17.12.2012 en.
Olympia Business Systems Vertriebs GmbH Zum Kraftwerk 1 45527 Hattingen.
Contents Giu OPERATING INSTRUCTIONS 3 Page Introduction 5 .................................... Warranty 5 .................................................. User Information 5 ........................................... Disclaimer of Liability 5 .....
Contents OPERATING INSTRUCTIONS Giu 4 Page Panic Alarm 24 .................................... Emergency Call (SOS) 24 .......................... Remote Access Via Telephone 25 .................. Resetting the Factory Settings (RESET) 26 .......... Registering Sensors 27 .
Introduction Giu OPERATING INSTRUCTIONS 5 Page Introduction Warranty Dear Customer, we are pleased that you have chosen this equipment. In the case of a defect, please return the device together with the receipt and original packing material to the point-of-sale.
Product Features / Scope of Delivery OPERATING INSTRUCTIONS Giu 6 Page Product Features S Wireless alarm system with emergency call, panic, room screening and handsfree functions. S Transmit function to activate outdoor sirens etc. S Integrated telephone dialling unit with outgoing message.
Safety Information Giu OPERATING INSTRUCTIONS 7 Page Safety Information Significance of the Symbols WARNING: Indicates potentially dangerous situations which could lead to fatal or severe personal injury if the information is ignored.
Installation OPERATING INSTRUCTIONS Giu 8 Page Installation, Base Unit Information on Selecting the Installation Location S The base unit should be installed or positioned in a central location (e.g. in the hallway of an apartment/house) in relation to the area to be monitored in order to keep all transmission paths as short as possible.
Installation Giu OPERATING INSTRUCTIONS 9 Page Positioning the Base Unit It is possible to setup the device in a user-friendly, inclined position on a table or desk. To do this, insert the two legs (1) supplied in the recesses for the wall installation bracket (2) on the rear of the base unit.
Operating Elements and Indicators OPERATING INSTRUCTIONS Giu 10 Page Operating Elements and Indicators The base unit is equipped with an SOS (emergency call) button for emer gency situations and a Panic button in the event of a direct threat.
Operating Elements and Indicators Giu OPERATING INSTRUCTIONS 11 Page At Home mode: The system is armed; on burglary, the acoustic alarm signal is issued 0-9, *, # Digit keys: On pressing the # button >3 sec.
Operating Elements and Indicators OPERATING INSTRUCTIONS Giu 12 Page h Save icon Battery indicator Battery capacity of base unit is low. Overview of LEDs With power supply Without power supply Top.
Menu Structure Giu OPERATING INSTRUCTIONS 13 Page Menu Structure Review Open Sensor01 Voice Record Remote:1 Voice Record Register Search… Open Sensor01 Voice Record Remote:1 Voice Record Trigger.
Menu Structure OPERATING INSTRUCTIONS Giu 14 Page Key Tone Key Tone-On Key Tone-Off Contrast Contrast-1-5 Language Deutsch Español Nederlands Dansk Português English Français Date/Time 01-01-2010 0.
Configuration Giu OPERATING INSTRUCTIONS 15 Page Configuration General Information NOTE: Before beginning to operate the base unit, de activate the key lock function. You need the 4-digit Entry Code to do this. The default, device-specific Entry Code is provided in the battery compartment of the base unit.
Configuration OPERATING INSTRUCTIONS Giu 16 Page Setting the Date/Time 1. Enter the device-specific Entry Code. Confirm it by pressing . 2. The menu is opened by pressing the Menu button briefly. 3. Select the Date/Time menu option. Confirm it by pressing .
Configuration Giu OPERATING INSTRUCTIONS 17 Page Activating the Internal Telephone Dialling Unit with OGM Function The internal telephone dialling unit is deactivated if no telephone numbers have been entered and saved. You can enter up to 10 individual telephone or mobile phone numbers of contact persons, such as relatives, friends or neighbours.
Configuration OPERATING INSTRUCTIONS Giu 18 Page After having entered phone numbers, ensure that they are correct in re spect of the alarm calls. You can do this by triggering a silent alarm. The telephone numbers you have entered are dialled in succession in the pro grammed sequence.
Configuration Giu OPERATING INSTRUCTIONS 19 Page Trigger Delay The alarm is triggered after a delay so that if someone enters through the main door, they can disarm the alarm system before the acoustic alarm and internal telephone dialling unit are activated.
Configuration OPERATING INSTRUCTIONS Giu 20 Page Alarm Period The base unit is equipped with an integrated siren. The duration of the acoustic alarm can be selected between a minimum of 1 minute to a max imum of 10 minutes. The alarm period is preset to 3 minutes (an alarm period up to 3 minutes is permitted in Germany!).
Configuration Giu OPERATING INSTRUCTIONS 21 Page Remote Control The button on the remote control can be configured as an SOS (emer gency call) or Panic button via the base unit. Proceed as follows to configure the button: 1. Enter the device-specific Entry Code.
Monitoring Functions OPERATING INSTRUCTIONS Giu 22 Page Overview of Monitoring Functions Monitoring function Acoustic alarm signal Internal telephone dialling unit activated Silent mode No Yes with sc.
Monitoring Functions Giu OPERATING INSTRUCTIONS 23 Page You can define the required type of alarm as follows using either the base unit or the remote control unit supplied: NOTE: If an outdoor siren is registered on the base unit, the alarm can only be stopped by the re mote control unit after 15 seconds at the earli est.
Monitoring Functions OPERATING INSTRUCTIONS Giu 24 Page Disarmed Mode NOTE: When the system is disarmed, you can move freely within the living quarters without trigger ing any alarms. Base unit 1. Enter the device-specific Entry Code. Confirm it by pressing .
Remote Access Via Telephone Giu OPERATING INSTRUCTIONS 25 Page Remote Access Via Telephone The wireless alarm system can be operated by remote access using a telephone. You can use a telephone to activate or deactivate the alarm system and switch the handsfree and screening functions on.
Resetting the Factory Settings (RESET) OPERATING INSTRUCTIONS Giu 26 Page Resetting the Factory Settings (RESET) NOTE: Please note that when carrying out a RESET, all the user settings are deleted.
Registering and Deregistering Sensors / System Extention Giu OPERATING INSTRUCTIONS 27 Page Registering Sensors Up to 32 sensors can be registered on the wireless alarm system. If you purchase optionally available sensors, such as additional remote controls, smoke detectors etc.
Changing the Batteries OPERATING INSTRUCTIONS Giu 28 Page Changing the Batteries If the battery charge of the sensors is low or practically empty, the following status messages appear in the display: Battery capacity low 1. bAtt Lo appears in the display.
Regular Maintenance and Servicing Giu OPERATING INSTRUCTIONS 29 Page Regular Maintenance and Servicing Base Unit 1. Disconnect the base unit from the power outlet before cleaning it! 2. Clean the surface of the housing with a soft, lint-free cloth. Never use any chemicals or scouring agents.
Information on Disposal OPERATING INSTRUCTIONS Giu 30 Page Information on Disposal The implementation of European law in national laws and direct ives obliges you to dispose of consumable goods appropriately. This serves to protect both persons and the environment.
Technical Data Giu OPERATING INSTRUCTIONS 31 Page Technical Data The wireless alarm systems in the Protect6XXX-Series operate within the frequency band specially reserved for security technology in the 868 MHz frequency range.
CE-Mark OPERATING INSTRUCTIONS Giu 32 Page CE Mark The device fulfils the requirements stipulated in the EU Directive: S 1999/5/EC (R&TTE) The CE Mark on the device confirms conformity.
Empty Page.
Empty Page 6HLWH.
Empty Page.
6HLWH PIN Code This is your individual, preset PIN code! If you want to change this predefined PIN code, please refer to Chapter "Configuration" in this operating instruction manual.
Een belangrijk punt na aankoop van elk apparaat Olympia Protect 6030 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Olympia Protect 6030 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Olympia Protect 6030 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Olympia Protect 6030 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Olympia Protect 6030 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Olympia Protect 6030 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Olympia Protect 6030 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Olympia Protect 6030 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
