Gebruiksaanwijzing /service van het product FoodPro van de fabrikant Omega
Ga naar pagina of 24
Fo o dP r o ™ PREMIER F OOD P ROCE SSOR INSTRUCTION M ANUAL.
.
4 Introduction Food Processor Safety .............................................................................................. 4 Electrical Requirements ............................................................................................ 4 Important Safeguards .
5 Y our safety and the safety of others are very important.W e have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others.
6 IMPORT ANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed, including the following: 1. Read all instructions. 2. T o protect against risk of electrical shock do not put Food Processor in water or other liquid.
7 W ARNING Cut Hazard Handle blades carefully. Failure to do so can result in cuts. First Cleaning Before using your Omega Food Pro for the first time, wash all r emovable parts. Cleaning the Food Processor 1. Make sure the Food Pro is unplugged. 2. Wipe the motor base and cor d with a warm, sudsy cloth, and wipe clean with a damp cloth.
8 FOOD PROCESSOR FEA TURES • Large 11-Cup W ork Bowl • Large Chopping/Mixing Stainless Steel Blade • W ork Bowl Cover with wide Feed Chute • Stainless Steel Dough Blade • Compact 4-Cup Mini .
9 1. Large 11-Cup W ork Bowl Durable polycarbonate bowl large enough for most jobs. 2. W ork Bowl Cover with Wide Feed Chute Handles large items with minimal pr eparat i on . 3. Large Chopping/Mixing Stainless Steel Blade Multi-use blade for quick mincing, cho pping, mixing, and emulsifications.
10 FOOD PROCESSOR FEA TURES 7. 2mm/4mm Stainless Steel Slicing Disk The two-sided disc will produce two differ ent size slices depending on the side use d.
11 1. Place the large work bowl onto the motor housing with the main handle to the left of the power panel. This aligns the bowl to properly engage the safety interlock. T urn the main handle to the right until it “clicks” or “locks” into place.
12 1. Rotate the Cover to the left until the “tab” is unseated. 2. Remove the Blade by pulling upward. (If the blade is held in place by ingredients, it may be removed with the W ork Bowl) 3. Rotate the Main Handle to the left until it is unseated and lift off of the motor housing.
13 Maximum Liquid Level This line is visible on the work bowl. Use as an indication of the maximum amount of liquid that can be used in the Food Pro. Power Pad The Food Pro will not operate until the Large W ork Bowl and the W ork Bowl Cov er are both properly installed.
14 1. Place the large work bowl onto the motor housing with the main handle to the left of the power panel. This aligns the bowl to properly engage the safety interlock turn the main handle to the right until it clicks” or “lock s” in to place. The main handle shoul d no w be centered with the Power Panel.
15 DISASSEMBL Y – SLICING OR SHREDDING DISK 1. Rotate the Cover to the left until the “tab” is unseated. 2. Remove the Disk and Adapter by pulling upward. 3. Remove the Disk from the Adapter by rotating the disk and/or adapter . 4. Rotate the Main Handle to the left until it is unseated and lift off of the motor housing.
16 The Food Pro will not operate until the Large W ork Bowl and the W ork Bowl Cover are both properly installed. Once installed, the indicator light will remain lit if the unit has power . On – Once pressed, the Food Pro will run continuously . Off – Stops the Food Pro.
17 1. Place the large work bowl onto the motor housing with the main handle to the left of the power panel. This aligns the bowl to properly engage the safety interlock. T urn the main handle to the right until it “clicks” or “locks” into place.
18 DISASSEMBL Y -MINI CHOPPER 1. Rotate the Cover to the left until the “tab” is unseated. 2. Remove the Mini Blade by pulling upward. (If the blade is held in place by ingredients, it may be removed with the Mini Chopper Bowl) 3. Remove the Mini Chopper Bowl from the Large W ork Bowl.
19 Power Pad The Food Pro will not operate until the Large W ork Bowl and the W ork Bowl Cover are both properly installed. Once installed, the indicator light will remain lit if the unit has power . On – Once pressed, the Food Pro will run continuously .
20 Hard cheese (Example: Parmesan, Romano) If the cheese cannot be pierced with t he ti p o f a s har p k ni fe, it is t oo har d to process. Do not use your Food Pro for processing. If the cheese can be pierced with the tip of a sharp knife, it is okay to continue.
21 HELPFUL HINTS 1. Never process any food that is so hard or firmly frozen that it cannot be pierced with the tip of a sharp knife Hard food can cause damage to the blade or motor . If a piece of hard food, such as carrot, becomes wedged or stuck on the blade, stop the processor and remove the blade.
22 8. When shredded or sliced food piles up on one side of the bowl, stop the processor and redistribute the food using a spatula. 9. Wh en fo od qua nt ity r eac hes th e bot tom of a slicing or shredding disc, remove the food. 10. A few larger pieces of food may remain on top of the disc after slicing or shredding.
23 OMEGA PRODUCTS, INC. Omega Model Food Pro Omega Products, Inc. 6291 L yters Lane Harrisburg, P A 17111 Omega Products, Inc. warrants this food processor to be fr ee from defects of workmanship and material under normal use and service. The food processor is requir ed to be operated solely on the electric current indicated on the unit.
24 Serial Number ___________________________________________________ Name __________________________________________________________ Address _________________________________________________________ C.
Omega Food Pro 11- Cup Direct Drive Food Processor with 4-Cup Mini Chopper INSTRUCTION MANUAL Omega Products, Inc. 6291 L yters Lane Harrisburg, P A 17111 717-561-1105 717-561-1298 fax 800-633-3401 www .
Een belangrijk punt na aankoop van elk apparaat Omega FoodPro (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Omega FoodPro heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Omega FoodPro vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Omega FoodPro leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Omega FoodPro krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Omega FoodPro bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Omega FoodPro kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Omega FoodPro . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
