Gebruiksaanwijzing /service van het product OS641C-MV-LS van de fabrikant Omega
Ga naar pagina of 16
OS641C -MV -LS Infrared T emperature T ransducer With Laser Marker OMEGA.
OMEGAnet SM On-Line Service http://www.omega.com Internet e-mail info@omega.com For immediate technical or application assistance: USA and Canada: Mexico and Latin America: Sales Service: 1-800-826-63.
INTRODUCTION This instrument is a portable easy use compact-sized digital infrared tempera- ture transducer with laser marker designed for simple one hand operation. SAFETY INFORMATION It is recommended that you read the safety and operation instructions before using the infrared thermometer.
2 CAUTION • Do not use the unit near any device which generates strong electromagnetic radiation or near a static electrical charge, as these may cause errors. • Do not use the unit where it may be exposed to corrosive or explosive gases. The unit may be damaged, or explosion may occur.
SPECIFICATIONS GENERAL Low battery indication: the "Red LED " is displayed when the battery voltage drops below the operating level. Operating Environment: 0°C to 50°C at < 70% relative humidity. Storage Temperature: -20°C to 60°C, 0 to 80% R.
4 ELECTRICAL Temperature Range: -20°C to 260°C. Analog Output: 1mV/°C. Accuracy: ±3% of reading or ±3°C, whichever is greater @ 18 to 28°C ambient operating temperature. Temperature Coefficent: ±0.2% of reading or ±0.2°C, whichever is greater, change in accuracy per °C change in ambient operating temperature above 28°C or below 18°C.
5 Spot size increases with distance from the probe tip as shown CAUTION: Use of controls or Adjustments or performance of Procedures other than those Specified herein may result in Hazardous radiation exposure.
6 OPERATING INSTRUCTIONS Push buttons Laser Marker Button Release MEAS button then press " " button to toggle between turn on and turn off the Laser Marker annunciator, If " " annunciator turn on, press MEAS button the laser marker beam is being emitted, releasing MEAS button turn off the laser marker beam.
7 OPERATION 1. Plug the infrared temperature transducer test leads into the Vdc input jack and common or ground input jack on the DMM. Observe polarity. 2. Set the DMM to the 2V range only, ignore the decimal point. 3. Use " " button to select turn on or turn off the Laser Marker.
8 MEASUREMENT CONSIDERATIONS 1. Theory of Measurement Every object emits infrared energy in accordance with its temperature. By mesuring the amount of this radiant energy, it is possible to determine the temperature of the emitting object.
9 4. Emissivity All objects emit invisible infrared energy. The amount of energy emitted is proportional to the object's temperature and its ability to emit IR energy. This ability, called emissivity, is based upon the material that the object is made of and its surface finish.
10 MAINTENANCE Battery Replacement Power is supplied by four 1.5V (AAA size) batteries. The "LOW BATT" red LED lighted when replacement is needed.To replace the batteries, remove the screw from the back of the meter and lift off the battery cover case.
Substance Thermal Substance Thermal emissivity emissivity Asphalt 0.90 to 0.98 Cloth (black) 0.98 Concrete 0.94 Human skin 0.98 Cement 0.96 Lather 0.75 to 0.80 Sand 0.90 Charcoal (powder) 0.96 Earth 0.92 to 0.96 Lacquer 0.80 to 0.95 W ater 0.92 to 0.96 Lacquer (matt) 0.
W ARRANTY OMEGA warrants this unit to be free of def ects in materials and workmanship and to give satisf actor y service for a period of 13 months from date of purchase. OMEGA W arranty adds an additional one (1) month grace period to the nor mal one (1) year product warranty to cov er handling and shipping time .
It is the policy of OMEGA to comply with all worldwide safety and EMC/EMI regulations that apply . OMEGA is constantly pursuing cer tification of its products to the European Ne w Approach Directives. OMEGA will add the CE mark to e ver y appropr iate de vice upon certification.
M-2865/0799 Where Do I Find Everything I Need for Process Measurement and Control? OMEGA...Of Course! HEATERS þ Heating Cable þ Cartridge & Strip Heaters þ Immersion & Band Heaters þ Flexi.
Een belangrijk punt na aankoop van elk apparaat Omega OS641C-MV-LS (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Omega OS641C-MV-LS heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Omega OS641C-MV-LS vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Omega OS641C-MV-LS leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Omega OS641C-MV-LS krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Omega OS641C-MV-LS bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Omega OS641C-MV-LS kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Omega OS641C-MV-LS . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
