Gebruiksaanwijzing /service van het product Agila (2010) van de fabrikant Opel
Ga naar pagina of 136
Introduction .................................... 2 In brief ............................................ 6 Keys, doors and windows ............ 18 Seats, restraints ........................... 27 Storage ........................................ 42 Instruments and controls .
2 Introduction Introduction.
Introduction 3 Vehicle specific data Please enter your vehicle's data on the previous page to keep it easily accessible. This information is available under the sections "Service and maintenance" and "Technical data" as well as on the identification plate.
4 Introduction 9 Warning Text marked 9 Warning provides information on risk of accident or injury. Disregarding this information may lead to injury. Caution Text marked Caution provides information on possible damage to the vehicle. Disregarding this information may lead to vehicle damage.
Introduction 5.
6 In brief In brief Initial drive information Vehicle unlocking Unlocking with key Turn the key in the driver's door lock to the front. The tailgate is unlocked when the driver’s door is opened. Unlocking with radio remote control Press button c to unlock the doors and load compartment.
In brief 7 Seat adjustment Seat positioning Pull handle, slide seat, release handle. Seat adjustment 3 28, Seat position 3 28. Seat backrests Pull lever, adjust inclination and release lever. Allow the seat to engage audibly. Do not lean on backrest when adjusting.
8 In brief Head restraint adjustment Press release button, adjust height, engage. Head restraints 3 27. Seat belt Pull out the seat belt and engage in belt buckle. The seat belt must not be twisted and must fit close against the body. The backrest must not be tilted back too far (maximum approx.
In brief 9 Exterior mirrors Swivel lever in required direction. Exterior mirrors 3 23. Select the relevant exterior mirror and adjust. Electric adjustment 3 24, Convex exterior mirrors 3 23, Folding exterior mirrors 3 24, Heated exterior mirrors 3 24.
10 In brief.
In brief 11 Instrument panel overview 1 Side air vents ....................... 79 2 Door window defroster vents .................................... 79 3 Remote control for infotainment system ............. 49 4 Turn signals, headlight flash, low beam and high beam .
12 In brief Front fog lights Operated with the > button. Front fog lights will only operate when the headlights or sidelights are switched on. Headlight flash, high beam and low beam headlight flash = pull lever high beam = push lever low beam = pull lever High beam 3 64, Headlight flash 3 64.
In brief 13 Hazard warning flashers Operated with the ¨ button. Hazard warning flashers 3 65. Horn Press j . Washer and wiper systems Windscreen wipers MIST = misting function OFF = off INT = adjustable timed interval wipe LO = slow HI = fast For a single swipe, move lever up from position OFF .
14 In brief Windscreen washer system Pull lever. Windscreen washer system 3 50, Washer fluid 3 97. Rear window wiper and washer system Turn f = washer fluid is sprayed onto the rear window OFF = off I.
In brief 15 Demisting and defrosting the windows Turn air recirculation mode 4 off. Set temperature control to warmest level. Cooling n on. Set air distribution control to V .
16 In brief Starting off Check before starting off ■ Tyre pressure and condition 3 108, 3 130. ■ Engine oil level and fluid levels 3 95. ■ All windows, mirrors, exterior lighting and number plates are free from dirt, snow and ice and are operational.
In brief 17 ■ Lock the vehicle with button e on the radio remote control. Activate the anti-theft locking system 3 22. ■ Do not park the vehicle on an easily ignitable surface. The high temperature of the exhaust system could ignite the surface. ■ Close windows.
18 Keys, doors and windows Keys, doors and windows Keys, locks ................................... 18 Doors ........................................... 21 Vehicle security ............................ 22 Exterior mirrors ............................ 23 Interior mirrors .
Keys, doors and windows 19 Radio remote control battery replacement Replace the battery as soon as the range reduces. Remove screw on key cover and remove the transmitter. Prise apart both halves of transmitter with a suitable screwdriver. Batteries do not belong in household waste.
20 Keys, doors and windows Locking Close doors and tailgate. Central locking system with key activation Turn the key in the driver's door lock to the rear. Central locking system with radio remote control Press button e . Central locking button Locks or unlocks all doors and the tailgate.
Keys, doors and windows 21 Interior lock Locks or unlocks the doors from inside the vehicle. To lock front doors from outside the vehicle, press the interior lock and keep exterior door handle raised when closing the door. Child locks 9 Warning Use the child locks whenever children are occupying the rear seats.
22 Keys, doors and windows Note The installation of certain heavy accessories onto the tailgate may affect its ability to remain open. If the tailgate is open when the ignition is switched on, control indicator y illuminates in the instrument cluster.
Keys, doors and windows 23 Anti-theft locking system with radio remote control Press button e on the radio remote control twice within 3 seconds. Immobiliser The system is integrated into the ignition switch and checks whether the vehicle is allowed to start with the key being used.
24 Keys, doors and windows Electric adjustment Select the relevant exterior mirror by turning the control to left (L) or right (R). In the central position no mirror is selected. Then swivel the control to adjust the mirror. Return the control to the central position to prohibit further adjustment.
Keys, doors and windows 25 Interior mirrors Manual anti-dazzle To reduce dazzle, adjust the lever on the underside of the mirror housing. Windows Manual windows The door windows can be opened or closed with the window winders. Power windows 9 Warning Take care when operating the power windows.
26 Keys, doors and windows Child safety system Press switch z to deactivate front passenger door power window operation when a child is occupying the seat. To activate press z again. Heated rear window Operated by pressing the Ü button. Heating works with the engine running and is switched off automatically after a short time.
Seats, restraints 27 Seats, restraints Head restraints ............................ 27 Front seats ................................... 28 Seat belts ..................................... 30 Airbag system .............................. 32 Child restraints .
28 Seats, restraints Front seats Seat position 9 Warning Only drive with the seat correctly adjusted. ■ Sit with your buttocks as far back against the backrest as possible. Adjust the distance between the seat and the pedals so that your legs are slightly angled when pressing the pedals.
Seats, restraints 29 9 Danger Do not sit nearer than 10 inches to the steering wheel, to permit safe airbag deployment. Seat backrests Pull lever, adjust inclination and release lever. Allow the seat to engage audibly. Do not lean on seat when adjusting.
30 Seats, restraints Seat belts The belts are locked during heavy acceleration or deceleration of the vehicle for the safety of the occupants. 9 Warning Fasten seat belt before each trip. In the event of an accident, people not wearing seat belts endanger their fellow occupants and themselves.
Seats, restraints 31 Triggered belt tensioners must be replaced by a workshop. Belt tensioners can only be triggered once. Note Do not affix or install accessories or other objects that may interfere with the operation of the belt tensioners.
32 Seats, restraints Removing To release belt, press red button on belt buckle. Seat belts on the rear seats The seat belt for the middle seat has a twin buckle arrangement. Engage the smaller latch plate (1) into the correct buckle, then pull the seat belt across and audibly engage the buckle marked CENTER (2).
Seats, restraints 33 Note The airbag systems and belt tensioner control electronics are located in the centre console area. Do not put any magnetic objects in this area. Do not stick anything on the airbag covers and do not cover them with other materials.
34 Seats, restraints The forward movement of the front seat occupants is decelerated, thereby considerably reducing the risk of injury to the upper body and head. 9 Warning Optimum protection is only provided when the seat is in the proper position 3 28.
Seats, restraints 35 The risk of injury to the upper body and pelvis in the event of a side-on collision is considerably reduced. 9 Warning Keep the area in which the airbag inflates clear of obstructions. Note Only use protective seat covers that have been approved for the vehicle.
36 Seats, restraints Airbag deactivation Front airbag and side airbag systems for the front passenger seat have to be deactivated if a child restraint system is to be fitted on this seat. The curtain airbag system, the belt tensioners and all driver airbag systems will remain active.
Seats, restraints 37 Child restraints Child restraint systems When a child restraint system is being used, pay attention to the following usage and installation instructions and also those supplied with the child restraint system. Always comply with local or national regulations.
38 Seats, restraints Child restraint installation locations Permissible options for fitting a child restraint system Weight and age class On front passenger seat On rear outboard seats On rear centre seat active airbag deactivated airbag Group 0: up to 10 kg or approx.
Seats, restraints 39 Permissible options for fitting an ISOFIX child restraint system Weight class Size class Fixture On front passenger seat On rear outboard seats On rear centre seat Group 0: up to .
40 Seats, restraints ISOFIX size class and seat device A – ISO/F3 = Forward-facing child restraint system for children of maximum size in the weight class 9 to 18 kg. B – ISO/F2 = Forward-facing child restraint system for smaller children in the weight class 9 to 18 kg.
Seats, restraints 41 ISOFIX child restraint systems Fasten vehicle-approved ISOFIX child restraint systems to the mounting brackets. When using ISOFIX mounting brackets for seat mounting, universally approved child restraint systems for ISOFIX may be used.
42 Storage Storage Storage compartments ................ 42 Load compartment ....................... 44 Roof rack system ......................... 47 Loading information ..................... 47 Storage compartments Instrument panel storage To open the instrument panel upper tray, lift front edge of lid.
Storage 43 Glovebox The glovebox should be closed while driving. Cupholders A cupholder is located in the front of the centre console. An additional cupholder is located at the back of the console. Sunglasses storage Fold down to open. Do not use for storing heavy objects.
44 Storage Load compartment Folding down rear backrests Remove load compartment cover as necessary. Push head restraints down by pressing the catch. Put the seat belts of the outer seats into belt guides. Release the centre seat belt detachable connector by inserting the ignition key into the slot.
Storage 45 On the one piece backrest, pull both release levers and fold down the backrest onto the seat cushion. To fold up, raise backrests and guide them into upright position until they engage audibly. Pull the centre seat belt connector latch plate from the roof holder slot.
46 Storage The cover can be stored in the rear floor storage compartment. Fitting Engage cover in side guides. Rear floor storage cover To access the rear floor storage compartment, lift the floor carpet using the central strap located near the tailgate latch and hang the string on the hook provided.
Storage 47 First aid kit Stow the first aid kit in the space on the left hand side of the rear floor storage compartment. Roof rack system Roof rack For safety reasons and to avoid damage to the roof, the vehicle approved roof rack system is recommended.
48 Storage ■ When transporting objects in the load compartment, the backrests of the rear seats must not be angled forward. ■ Do not allow the load to protrude above the upper edge of the backrests. ■ Do not place any objects on the load compartment cover or the instrument panel, and do not cover the sensor on top of the instrument panel.
Instruments and controls 49 Instruments and controls Controls ....................................... 49 Warning lights, gauges and indicators ..................................... 53 Vehicle messages ........................ 62 Trip computer ........
50 Instruments and controls Horn Press j . Windscreen wiper/washer Windscreen wiper MIST = misting function OFF = off INT = adjustable timed interval wipe LO = slow HI = fast For a single swipe, move lever up from position OFF . Do not use if the windscreen is frozen.
Instruments and controls 51 Windscreen washer Pull lever. Washer fluid is sprayed onto the windscreen. In vehicles with timed interval wipe position INT , the wipers switch on automatically at low speed if they are not already activated.
52 Instruments and controls Clock The time is shown in the odometer display when the ignition is switched on. Setting the time Press and hold the X button for approx. 2 seconds; clock display now in setting mode. Minute display flashes. Press X to set minutes.
Instruments and controls 53 The portable ashtray can be fitted in the front or rear cup holder in the centre console. Warning lights, gauges and indicators Speedometer Indicates vehicle speed.
54 Instruments and controls To change brightness level, switch on headlights and press the MODE button repeatedly until the squares that indicate the brightness level appear in the odometer display. ⃞⃞⃞⃞ = maximum brightness ⃞ = minimum brightness Press and hold the MODE button to cycle through brightness levels.
Instruments and controls 55 Service display In the case of vehicles with fixed engine oil change and service intervals, InSP appears in the odometer display if the ignition is switched on when servicing is overdue: have the next service carried out within one week or 300 miles.
56 Instruments and controls Control indicators.
Instruments and controls 57 The control indicators described are not present in all vehicles. The description applies to all instrument versions. When the ignition is switched on, most control indicators will illuminate briefly as a functionality test.
58 Instruments and controls Charging system p illuminates red. Illuminates when the ignition is switched on and goes out shortly after the engine starts. Illuminates when the engine is running Stop, switch off engine. Battery is not charging. Engine cooling may be interrupted.
Instruments and controls 59 Antilock brake system (ABS) u illuminates yellow. Illuminates briefly after the ignition is switched on. The system is ready for operation when the u goes out. If u does not go out after a few seconds, or if it illuminates while driving, there is a fault in the ABS.
60 Instruments and controls Illuminates or flashes when the engine is running if the coolant temperature is too high. Caution If engine coolant temperature is too high, stop vehicle, switch off engine. Danger to engine. Check coolant level. Coolant level 3 96.
Instruments and controls 61 When the system has calculated that oil life has been diminished, I flashes in the instrument cluster when the engine is running. Have engine oil and filter changed by a workshop within one week or 300 miles (whichever occurs first).
62 Instruments and controls Vehicle messages Warning chimes When starting the engine or while driving ■ If the driver's seat belt is not fastened and vehicle speed exceeds approx. 9 mph. ■ When operating the turn signals. When the vehicle is parked and/or the driver's door is opened ■ When the key is in the ignition switch.
Instruments and controls 63 Setting units of measure You can select which units of measure are to be used for fuel consumption figures. With the vehicle stationary and with instantaneous consumption showing in the display, press and hold the MODE button for a few seconds to toggle between gal/h and mpg.
64 Lighting Lighting Exterior lighting ............................ 64 Interior lighting ............................. 67 Exterior lighting Light switch Turn light switch: 9 = Headlights 8 = Sidelights OFF = Off High beam To switch from low to high beam, push lever.
Lighting 65 Headlight range adjustment Manual headlight range adjustment To adapt headlight range to the vehicle load to prevent dazzling: turn knurled wheel to required position.
66 Lighting Turn and lane-change signals lever up = right indicator lever down = left indicator If the lever is moved past the resistance point, the indicator is switched on constantly. When the steering wheel moves back, the indicator is automatically deactivated.
Lighting 67 Interior lighting Interior lights During entry and exit of the vehicle, the light automatically switches on and then off after a delay. Operate switch: OFF = always off DOOR = automatic sw.
68 Infotainment system Infotainment system Introduction .................................. 69 Radio ........................................... 72 Audio players .
Infotainment system 69 Introduction.
70 Infotainment system 1. f : CD eject 2. 6 : Sound settings 3. i : Mute/unmute 4. AST : Auto search 5. Display 6. CD slot 7. AF : Alternative Frequency 8. PTY : Program Type 9. TA : Traffic Announcement 10. 3, RDM : Radio preset station 3, CD/MP3 random playback 11.
Infotainment system 71 5. Press and hold the PTY button for approx. 2 seconds to enter the chosen user ID. SEC appears again in the display and the unit switches off automatically. Entering the 4-digit security ID After reinstalling the infotainment system or reconnecting the vehicle battery, the 4-digit security ID must be entered.
72 Infotainment system Auto Volume Control The AVC function automatically adjusts volume depending on vehicle speed to compensate for road noise. In the sound settings menu, three levels can be selected or the function can be switched off. Radio AM-FM radio AM (Long Wave and Medium Wave) and FM (Frequency Modulation) wavebands can be selected.
Infotainment system 73 Selecting stored stations Tune to the desired waveband and press the relevant preset station button. If a station is not stored on the selected button, - - - will appear in the display. Radio data system (RDS) RDS is a service which helps search for the required FM station.
74 Infotainment system When TA is active and a Traffic Program is currently being received, playback is interrupted for the traffic announcement and resumes when the announcement ends. Switching TA on and off Press the TA button to switch on traffic announcements.
Infotainment system 75 Selecting next or previous track Press the h button to skip to the next track and the g button to skip to the previous track. Fast forwards/backwards search Press and hold the h button to fast forward and the g button to fast rewind through the current track.
76 Infotainment system Seek advice on predetermined installation points for the external antenna or equipment holder and ways of using devices with a transmission power exceeding 10 watts.
Climate control 77 Climate control Climate control systems ............... 77 Air vents ....................................... 79 Maintenance ................................ 80 Climate control systems Heating and ventilation system Controls for: ■ Temperature ■ Air distribution ■ Fan speed Heated rear window Ü 3 26.
78 Climate control Air conditioning system Cooling n Operated with the n button and functional only when the engine and fan are running. The air conditioning system cools and dehumidifies (dries) when outside temperature is a little above the freezing point.
Climate control 79 Demisting and defrosting the windows V ■ Set air distribution control to V . ■ Set temperature control to warmest level. ■ Set fan speed to highest level. ■ Switch on heated rear window Ü . ■ Open side air vents as required and direct them towards the door windows.
80 Climate control Maintenance Air intake The air intake in front of the windscreen in the engine compartment must be kept clear to allow air intake. Remove any leaves, dirt or snow. Pollen filter The pollen filter cleans dust, soot, pollen and spores from the air entering the vehicle through the air intake.
Driving and operating 81 Driving and operating Driving hints ................................. 81 Starting and operating ................. 81 Engine exhaust ............................ 83 Automatic transmission ................ 85 Manual transmission .
82 Driving and operating Ignition switch positions LOCK = Ignition off ACC = Steering wheel lock released, ignition off ON = Ignition on, for diesel engine: preheating START = Starting Starting the en.
Driving and operating 83 ■ Switch off the engine and ignition. Push key into ignition switch before turning to LOCK position and removing (vehicles with automatic transmission: depress foot brake and shift into P). Turn the steering wheel until the steering wheel lock engages.
84 Driving and operating Stopping the journey or switching off the engine during cleaning is not recommended. Caution If the cleaning process is interrupted more than once, there is a great risk of provoking severe engine damage. Cleaning takes place quickest at high engine speeds and loads.
Driving and operating 85 Automatic transmission The automatic transmission permits automatic gearshifting. Transmission display The mode or selected gear is shown in the transmission display.
86 Driving and operating Rocking the vehicle Rocking the vehicle is only permissible if the vehicle is stuck in sand, mud or snow. Move the selector lever between D and R in a repeat pattern. Do not race the engine and avoid sudden acceleration. Parking Apply the parking brake and engage P .
Driving and operating 87 engaged again, the selector lever will be locked in position again. On variants with SHIFT LOCK button, push button and move selector lever. Have the cause of the power supply interruption remedied by a workshop. 4. Refit release button cap.
88 Driving and operating Brakes The brake system comprises two independent brake circuits. If a brake circuit fails, the vehicle can still be braked using the other brake circuit. However, braking effect is achieved only when you depress the brake pedal firmly.
Driving and operating 89 Brake assist If the brake pedal is depressed quickly and forcefully, maximum brake force is automatically applied (full braking). Maintain steady pressure on the brake pedal for as long as full braking is required. Maximum brake force is automatically reduced when the brake pedal is released.
90 Driving and operating Control indicator TCSS OFF illuminates. TC is reactivated by pressing the TCSS OFF button again. Control indicator TCSS OFF 3 59. Electronic stability program Electronic Stability Program (ESP®) improves driving stability when necessary, regardless of the type of road surface or tyre grip.
Driving and operating 91 Fuel for diesel engines Only use diesel fuel that complies with DIN EN 590. The fuel must have low sulphur content (max. 10 ppm). Equivalent standardised fuels with a biodiesel (= FAME according to EN14214) content of max. 7% by volume (like DIN 51628 or equivalent standards) may be used.
92 Driving and operating To open fuel filler cap: turn it anticlockwise. Caution Wipe off any overflowing fuel immediately. Fuel filler cap Only a genuine fuel filler cap provides full functionality. Diesel-engined vehicles have special fuel filler caps.
Vehicle care 93 Vehicle care General Information ..................... 93 Vehicle checks ............................. 94 Bulb replacement ......................... 99 Electrical system ........................ 103 Vehicle tools ......................
94 Vehicle care ■ Check the engine oil level. ■ Check the coolant level. ■ Fit the number plate if necessary. End-of-life vehicle recovery Information on end-of-life vehicle recovery centres and the recycling of end-of-life vehicles is available on our website.
Vehicle care 95 Locate the safety catch on the underside of the bonnet, push the catch to the left and lift the bonnet. Air intake 3 80. Secure the bonnet support. Closing Before closing the bonnet, press the support into the holder. Lower the bonnet and allow it to drop into the catch.
96 Vehicle care When the engine oil level has dropped to the MIN mark, top up engine oil. We recommend the use of the same type of engine oil that was used at the last change. The engine oil level must not exceed the MAX mark on the dipstick. Caution Overfilled engine oil must be drained or suctioned out.
Vehicle care 97 9 Warning Allow the engine to cool before opening the cap. Carefully open the cap, relieving the pressure slowly. Top up with antifreeze.
98 Vehicle care Only use high-performance brake fluid approved for your vehicle. Brake and clutch fluid 3 123. Battery The vehicle battery is maintenance- free. Batteries do not belong in household waste. They must be disposed of at an appropriate recycling collection point.
Vehicle care 99 Bulb replacement Switch off the ignition and turn off the relevant switch or close the doors. Only hold a new bulb at the base! Do not touch the bulb glass with bare hands.
100 Vehicle care 6. Engage spring wire clip, and reattach plug connector to bulb. 7. Replace headlight protective cover. Sidelights 1. Remove headlight protective cover. 2. Withdraw sidelight bulb holder from reflector. 3. Remove bulb from socket and renew bulb.
Vehicle care 101 Tail lights 1. Open tailgate. 2. Remove both screws on rear light assembly. 3. Pull light assembly away from vehicle, towards the rear. 4. Push bulb into socket slightly, rotate anti-clockwise and remove. 5. Insert new bulb. 6. Replace light assembly in original position, ensuring the upper and lower lugs are seated correctly.
102 Vehicle care 7. Replace bulb holder in light assembly and install light assembly in tailgate. 8. Open tailgate and replace bolts removed earlier. Number plate light 1. Remove bulb holder by twisting it and pulling it away from the vehicle. 2. Remove bulb by pulling straight out.
Vehicle care 103 Electrical system Fuses Data on the replacement fuse must match the data on the defective fuse. There are two fuse boxes in the vehicle: ■ on the left-hand side of the vehicle below the instrument panel, ■ in the engine compartment located next to the battery.
104 Vehicle care To help in replacing fuses, a fuse extractor is located in the fuse box. Place the fuse extractor on the various types of fuse from the top or side, and withdraw fuse. Engine compartment fuse box Petrol engines The fuse box is located next to the battery in the engine compartment.
Vehicle care 105 No. Circuit 10 Ignition switch 11 Radiator fan 12 - 13 ABS, ESP 14 - 15 Engine electrics 16 Front fog lights 17 Headlight (left) 18 Headlight (right) Diesel engines The fuse box is located behind the battery in the engine compartment.
106 Vehicle care No. Circuit 10 Brake light switch 11 Headlight (right) 12 Headlight (left) 13 Front fog lights 14 Ignition switch 15 Ignition switch, power windows, wipers, starter Instrument panel fuse box Located on the driver's side of the vehicle, below the instrument panel.
Vehicle care 107 No. Circuit 21 Heated rear window 22 Horn, hazard warning 23 Manual transmission 24 Power windows Vehicle tools Tools To access the jack, vehicle tools and tyre repair kit 3 110, open.
108 Vehicle care Wheels and tyres Tyre condition, wheel condition Drive over edges slowly and at right angles if possible. Driving over sharp edges can cause tyre and wheel damage. Do not trap tyres on the kerb when parking. Regularly check the wheels for damage.
Vehicle care 109 Incorrect tyre pressures will impair safety, vehicle handling, comfort and fuel economy and will increase tyre wear. 9 Warning If the pressure is too low, this can result in considerable tyre warm- up and internal damage, leading to tread separation and even to tyre blow-out at high speeds.
110 Vehicle care 9 Warning Use of unsuitable tyres or wheel covers could lead to sudden pressure loss and thereby accidents. Tyre chains Tyre chains are only permitted on the front wheels. Always use fine mesh chains that add no more than 10 mm to the tyre tread and the inboard sides (including chain lock).
Vehicle care 111 1. Shake sealant bottle, remove cap and screw filler hose on to bottle, to pierce inner cap. 2. Unscrew valve cap from defective tyre and unscrew valve insert using supplied remover. 3. Remove the plug from the end of the filler hose and insert filler hose onto tyre valve.
112 Vehicle care 9. Switch compressor on/off switch to position I (on). 10. Inflate the tyre to the correct pressure 3 130. If there is no reading, the air compressor hose to tyre valve connection may be faulty. Re-check the connection. If the prescribed tyre pressure is not obtained within 10 minutes, remove the tyre repair kit.
Vehicle care 113 Note The driving characteristics of the repaired tyre is severely affected, therefore have this tyre replaced. If unusual noise is heard or the compressor becomes hot, turn compressor off for at least 30 minutes. Pay attention to storage information and best before date on sealant bottle.
114 Vehicle care 3. Ensure the jack is positioned correctly with the vehicle jacking points. The location of front and rear jacking bars may be indicated by notches on the bottom edge of the vehicle, under the doors. 4. Attach the jack handle to the wheel bolt wrench (as shown in illustration) and insert hook end of jack handle through jack eye.
Vehicle care 115 5. Rotate jack handle clockwise using the attached wheel bolt wrench to raise vehicle. Raise the vehicle until the wheel is just clear of the ground. 6. Unscrew wheel bolts completely by turning anti-clockwise and wipe clean with a cloth.
116 Vehicle care Temporary spare wheel Use of the temporary spare wheel could affect driveability. Have the defective tyre renewed or repaired as soon as possible. Only mount one temporary spare wheel. Do not drive faster than 50 mph. Take curves slowly.
Vehicle care 117 Lead connection order: 1. Connect the red lead to the positive terminal of the booster battery. 2. Connect the other end of the red lead to the positive terminal of the discharged battery. 3. Connect the black lead to the negative terminal of the booster battery.
118 Vehicle care Towing Towing the vehicle Towing from the front is permissible in emergency situations only. Disengage cap at bottom and remove downwards. The towing eye is stowed with the vehicle tools 3 107. Screw in the towing eye as far as it will go until it stops in a horizontal position.
Vehicle care 119 Towing another vehicle Caution The rear lashing eye is designed for shipping purposes only. Towing another vehicle from the rear is not permitted! Appearance care Exterior care Locks The locks are lubricated at the factory using a high quality lock cylinder grease.
120 Vehicle care Exterior lights Headlight and other light covers are made of plastic. Do not use any abrasive or caustic agents, do not use an ice scraper, and do not clean them dry. Polishing and waxing Wax the vehicle regularly (at the latest when water no longer beads).
Vehicle care 121 Caution Close Velcro fasteners as open Velcro fasteners on clothing could damage seat upholstery. Plastic and rubber parts Plastic and rubber parts can be cleaned with the same cleaner as used to clean the body. Use interior cleaner if necessary.
122 Service and maintenance Service and maintenance General information ................... 122 Recommended fluids, lubricants and parts ..............
Service and maintenance 123 Recommended fluids, lubricants and parts Recommended fluids and lubricants Only use products that have been tested and approved. Damage resulting from the use of non- approved materials will not be covered by the warranty. 9 Warning Operating materials are hazardous and could be poisonous.
124 Service and maintenance The system is factory filled with coolant designed for frost protection down to approx. -28 °C. This concentration should be maintained all year round. Coolant additives intended to give additional corrosion protection or seal against minor leaks can cause function problems.
Technical data 125 Technical data Vehicle identification .................. 125 Vehicle data ............................... 127 Vehicle identification Vehicle Identification Number The Vehicle Identification Number is visible through the windscreen.
126 Technical data Information on identification plate: 1 = Manufacturer 2 = Vehicle Identification Number 3 = Permissible gross vehicle weight rating 4 = Permissible gross train weight 5 = Maximum pe.
Technical data 127 Vehicle data Engine data Sales designation 1.0 1.2 1.3 Engine identifier code K 10 B K 12 B D 13 A Number of cylinders 3 4 4 Piston displacement [cm 3 ] 996 1242 1248 Engine power [.
128 Technical data Performance Engine K 10 B K 12 B D 13 A Maximum speed 1) [mph] Manual transmission 99 109 103 Automatic transmission – 106 – Fuel consumption - CO 2 - emissions Manual transmission / automatic transmission. To convert l/100 km into mpg, divide 282 by the number of litres/100 km.
Technical data 129 Vehicle weight Kerb weight, basic model Agila Engine Manual transmission Automatic transmission without/with optional equipment [kg] K 10 B 975/1030 – K 12 B 990/1045 1040/1065 D .
130 Technical data Capacities Engine K 10 B K 12 B D 13 A Engine oil including filter [l] 2.9 3.3 3.1 between MIN and MAX [l] 1.0 1.0 1.0 Fuel tank, nominal capacity [l] 45 45 45 Tyre pressures Comfor.
Customer information 131 Customer information Vehicle data recording and privacy ....................................... 131 Vehicle data recording and privacy Event data recorders The vehicle has a number of sophisticated systems that monitor and control several vehicle data.
132 Index A Accessories and vehicle modifications ............................ 93 Adjustable air vents ..................... 79 Airbag and belt tensioners ........... 57 Airbag deactivation ................ 36, 57 Airbag system .......................
133 Electronic Stability Program fault.. 59 End-of-life vehicle recovery ......... 94 Engine compartment fuse box ... 104 Engine coolant ............................. 96 Engine coolant temperature ........ 59 Engine data ..............................
134 O Odometer ..................................... 53 Operation ..................................... 71 Outside temperature .................... 51 Overrun cut-off ............................. 82 P Parking .................................. 16, 82 Parking brake .
135 W Warning chimes ........................... 62 Warning triangle .......................... 46 Washer and wiper systems ......... 13 Washer fluid ................................. 97 Wheel changing ......................... 113 Wheel covers ......
136.
Een belangrijk punt na aankoop van elk apparaat Opel Agila (2010) (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Opel Agila (2010) heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Opel Agila (2010) vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Opel Agila (2010) leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Opel Agila (2010) krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Opel Agila (2010) bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Opel Agila (2010) kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Opel Agila (2010) . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.