Gebruiksaanwijzing /service van het product OPR 3001 van de fabrikant Opticon
Ga naar pagina of 40
OPR 3001 Rugged Handheld Laser Scanner Specifications Manual.
Opticon OPR 3001 S pecifications Manual 2 All information subject to change without notice. Document History Model Number: OPR 3001 Specification Number: SS06106 Edition: 2 Original Spec Number: SS06080 Date: 2006-12-27 Copyright 2007 Opticon. All right s reserved.
Opticon OPR 3001 S pecifications Manual 3 Content s 1. Abstract .................................................................................................................................... 6 2. Overview ........................................
Opticon OPR 3001 S pecifications Manual 4 8.2.1. Settings and Comm unicati on ................................................................................................. 23 8.2.2. Interface Circuit ...............................................
Opticon OPR 3001 S pecifications Manual 5 16.1. Laser Safety ................................................................................................................... 38 16.2. Product Safety ..................................................
Opticon OPR 3001 S pecifications Manual 6 1. Abstract This manual provides specifications for the OPR 3001 handheld laser barcode scann er. 2. Overview The OPR 3001 is a rugged handheld laser barcode scanner with protection against dust and splashing water to ensure reliable operation in h arsh environments.
Opticon OPR 3001 S pecifications Manual 7 3. Physical Features 3.1. Dimensions W 68 X D 150 X H 155 mm (except protruding portion) 3.2. Weight 230 ｇ max (excluding cable). 4. Environmental Specifications 4.1. Operating Temper ature and Humidity Temperature: -10 to +60° C Humidity: 5 to 90% RH 4.
Opticon OPR 3001 S pecifications Manual 8 Conditions Barcode Sample: OPTOELECTRONICS Test Sample PCS: 0.9 Resolution: 0.25 mm Symbology: 9-digit Code-39 Quiet Zone: 10 mm N/W Ratio: 1:2.5 Distance: 100 mm from the edge of scanner Angle: α = 0° β = 15° γ = 0° Curvature: R = ∞ Power supply voltage: 6.
Opticon OPR 3001 S pecifications Manual 9 6. Optical Specifications 6.1. Laser Scanning Specification Parameter Specification Unit Light-emitting Element Red laser diode - Emission Wavelength 650 ±10 (25° C) nm Light Output 1.
Opticon OPR 3001 S pecifications Manual 10 7. Technical Specifications The conditions for technical specifications are as follows, unle ss otherwise specified in each section.
Opticon OPR 3001 S pecifications Manual 11 7.2. Scan Area and Resolution The depth of field is measured from the edge of the scanner. The scanning range is within the circular arc centered on the scan origin. Figure 3: Scan area and resol ution (i n mm) Resolution Symbology PCS Quiet Zone Digit Decode depth (mm) 1.
Opticon OPR 3001 S pecifications Manual 12 7.3. Pitch, Skew, and Tilt 7.3.1. Pitch Angle α = ±35° α ＝ 3 5 ° α ＝ 3 5 ° Figure 4: Pitch.
Opticon OPR 3001 S pecifications Manual 13 7.3.2. Skew Angle and Dead Zone Skew angle: β = ±50° (Excluding dead zone) Dead zone: β = ±8° (There are some areas in which decoding fails due to spec.
Opticon OPR 3001 S pecifications Manual 14 7.3.3. Tilt Angle γ = ±20° γ ＝ 2 0 ° γ ＝ 2 0 ° Figure 6: Tilt angle Conditions Barcode Sample: OPTOELECTRONICS Test Sample Distance: 60 mm from t he edge of the scanner Label: Pitch Angle, Sk ew A ngle, Dead Zone PCS = 0.
Opticon OPR 3001 S pecifications Manual 15 7.4. Curvature With 8-digit JAN/UPC/EAN barcodes, decoding performance is guaranteed when R ≥ 15 mm. With 13-digit JAN/UPC/EAN barcodes, decoding performance is guaranteed when R ≥ 20 mm. Figure 7: Curvature Conditions Barcode Sample: OPTOELECTRONICS Test Sample PCS = 0.
Opticon OPR 3001 S pecifications Manual 16 8. Interface Specifications 8.1. RS-232C Inte rface Specification 8.1.1. Settings and Communication Reading menu barcodes [ZZ] + [U2] + [ZZ] can set the RS-232C interface default.
Opticon OPR 3001 S pecifications Manual 17 8.1.3. Interface Circuit Figure 8: Interface circuit 8.1.4. Character Format Figure 9:Character format (same for both sendi ng a nd receiving).
Opticon OPR 3001 S pecifications Manual 18 8.1.5. Communication Format Figure 10: Communication format 8.1.6. Handshaking Select handshaking options using the menu or command listed below.
Opticon OPR 3001 S pecifications Manual 19 The scanner stays ON (is able to receive data) except during certain parts of the process, such as receiving data (buzzer command execution), transmitting data, and menu processing. The scanner checks the CTS line before transmitting data.
Opticon OPR 3001 S pecifications Manual 20 c) MODEM The scanner turns CS line ON before transmitting data. Other processes are the same as BUSY/READY. Figure 15: Modem transmit data.
Opticon OPR 3001 S pecifications Manual 21 d) ACK/N AK After data has been transmitted, the scanner expects to receive one of the following responses from the host: • ACK response—Action: The scanner completes transmission with the good-read buzzer and returns to the initial state.
Opticon OPR 3001 S pecifications Manual 22 e) ACK/NAK NO RESPONSE When no response from the host is received within the setting time, the scanner assumes an ACK response, and returns to the initial state without the error buzzer. The other actions are the same as ACK/NAK.
Opticon OPR 3001 S pecifications Manual 23 8.2. USB Interface Specification 8.2.1. Settings and Communication Reading menu barcodes [ZZ] + [SU] + [ZZ] can set the USB interface default.
Opticon OPR 3001 S pecifications Manual 24 9. Cable and Connector 9.1. Cable Specifications 9.1.1. RS-232C Cable (Standard specification) Type: Straight Diameter: Φ 4.
Opticon OPR 3001 S pecifications Manual 25 9.1.2. USB Cable (Standard specification) Type: Straight Diameter: Φ 4.8 ±0.5 mm Length: 1500 ±50, -0 mm Cores: 4 insulated wires, 1 conductive wire Weigh.
Opticon OPR 3001 S pecifications Manual 26 9.1.3. Wedge Cable (Standard specification) Type: Y cable Diameter: Φ 4.8 ±0.5 mm Length: 1500 ±50 , -0 mm Cores: 8 insulated wires, 1 conductive wire Wei.
Opticon OPR 3001 S pecifications Manual 27 9.2. Scanner Connector Specification CN801 (13-pin) Signal Name Pin Number RS-232C USB Wedge 1 NC VCC VCC 2 R×D NC NC 3 T×D NC NC 4 NC NC CPU_CLK 5 NC NC CPU_DATA 6 GND GND GND 7 NC USB+ NC 8 NC USB- NC 9 NC NC KB_DATA 10 NC NC KB_CLK 11 CTS NC NC 12 RTS NC NC 13 VCC NC NC 10.
Opticon OPR 3001 S pecifications Manual 28 * If you are using software version TS01Y04 or later, it is not necessary to configure the foregoing settings.
Opticon OPR 3001 S pecifications Manual 29 10.2. Default Settings 1: Readable Codes Code type Reading Transmit Code Length Transmit CD Calculate CD Prefix Suffix Transmit Other UPC-A X - C.
Opticon OPR 3001 S pecifications Manual 30 Notes: • In the “Reading” column, “ ” means “Enable reading” and “ X ” means “Disable reading.” • In the “Transmit code length” column, “ ” means “Transmit code length” and “ X ” means “Do not transmit code length.
Opticon OPR 3001 S pecifications Manual 31 11. Serial Number The serial number as shown below is affixed to the scanner. Figure 22: Serial number diag ram.
Opticon OPR 3001 S pecifications Manual 32 12. Packaging Specifications 12.1. Individual Packaging Specification Put the scanner in a protective foam bag and place it in a sin gle packing box. The scanner shown is an RS-232C unit. Descriptions on an individual packaging box label differ, depending on the interface type.
Opticon OPR 3001 S pecifications Manual 33 12.2. Collective Packaging Specification The scanner shown is an RS-232C unit. Descriptions on a collective packaging box label differ, depending on the interface type. The “RO” mark may be indicated on the upper side of the individual packaging box label.
Opticon OPR 3001 S pecifications Manual 34 13. Durability 13.1. Electrical Noise No malfunction should occur when sinusoidal electrical noise (10Hz -100kHz, < 0.1Vpp) is added to a power supply line. Conditions Barcode Sample: OPTOELECTRONICS Test Sample PCS: 0.
Opticon OPR 3001 S pecifications Manual 35 13.3. Shock 13.3.1. Product Drop Test No malfunction should occur after the following drop test. As shown below, drop the scanner from 200 centimeters above the concrete floor (three times from each of 6 angles).
Opticon OPR 3001 S pecifications Manual 36 13.6. Cable Strength 13.6.1. Cable Pull Strength Affixed the scanner to an immovable object and pulled it using a force of 49N (5.0 kgf) for 1 minute. Observed no abnormality in either structure or performance.
Opticon OPR 3001 S pecifications Manual 37 15. Auto Trigger (Option) The OPR 3001 has an optional auto trigger setting, which starts barcode reading auto matically by using sensor detection. When auto trigger is enabled, a laser beam is emitted and points to the auto trigger area.
Opticon OPR 3001 S pecifications Manual 38 15.1.1. Auto Trigger Settings Functions Menu labels Menu codes SET _ZZ_ ZZ Disable auto trigger _+F_ +F Enable auto trigger _+I_ +I END _ZZ_ ZZ 16. Regulatory Compliance 16.1. Laser Safety The scanner emits laser beams.
Opticon OPR 3001 S pecifications Manual 39 17. Safety 17.1. Shock • Do not throw or drop the scanner. • Do not place heavy objects on the cables. 17.2. Temperature Conditions • Do not use the scanner at temperatures outside the specified range. • Do not pour boiling water on the scanner.
Opticon OPR 3001 S pecifications Manual 40 18. Mechanical Drawing Dimensions: 3 W 68 X D 150 X H 155 (mm) (except protruding portion) Figure 28: Mechanical draw in g.
Een belangrijk punt na aankoop van elk apparaat Opticon OPR 3001 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Opticon OPR 3001 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Opticon OPR 3001 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Opticon OPR 3001 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Opticon OPR 3001 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Opticon OPR 3001 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Opticon OPR 3001 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Opticon OPR 3001 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
