Gebruiksaanwijzing /service van het product DVD R 212 van de fabrikant Palsonic
Ga naar pagina of 48
DVD R 212 DVD RECORDER PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL: (02) 9313 7111 FAX: (02) 9313 7555 www.palsonic.com.
Safety Instructions 1 Danger Symbol The lightning flash with an arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of dangerous voltage in the unit.
Table of Contents 2 Basic Information Features of the Machine .................................................................................................................. Terms ....................................................................
Table of Contents 3 Chapter Edit (Continued) Menu Description ............................................................................................................................. Operation Steps ...............................................
Table of Contents 4 Track Selection ............................................................................................................................ Track Selection Play for Audio Discs .....................................................
Basic Information 5 The machine is capable of processing and recording various video signals into high quality DVD disks, such as the input signals of TV, ordinary disk player and DV. In addition, the machine can be used as a DVD player of excellent performance.
Basic Information 6 Recording quality For DVD+R/RW disc with the capacity of 4.7GB, there are 4 different recording qualities in accordance with the compressing program SLP: Ordinary resolution, a bos.
Basic Information 7 Progressive and Interlaced Interlaced means a frame picture be scanned to two field, first scan odd field, then scan even field, the image of resolution is ordinary. Progressive means a picture be scanned at one field, the image of resolution is higher.
Basic Information 8 1. RF SIGNAL INPUT 2. RF SIGNAL OUTPUT 3. AUDIO INPUT (REAR LEFT/RIGHT) 4. AUDIO OUTPUT (MIXED) 5. 5.1 CH AUDIO OUTPUT 6. COMPOSITE VIDEO OUTPUT 7. S-VIDEO INPUT 8. DIGITAL AUDIO-COAXIAL OUTPUT 9. DIGITAL AUDIO- OPTICAL OUTPUT 10. COMPONENT OUTPUT FOR PROGRESSIVE SCAN 1 2 3 4 5 6 8 9 10 7 1.
Remote Control 9 21 20 1 2 23 24 26 28 29 30 31 33 37 39 35 32 34 38 40 41 42 36 27 25 3 4 5 6 7 8 9 11 13 15 17 19 14 16 18 22 12 10 44 43 1. OPEN/CLOSE 2. DV 3. TV 4. NUMBERS 5. SETUP 6. DIRECTION (UP/DOWN/LEFT/RIGHT) 7. SELECT 8. MENU 9. TIMER 10. REC/OTR (RECORD/ONE-TOUCH RECORD) 11.
How to install and use the remote controller 10 Notes: Do not drop the remote controller or leave it in places of high humidity. Do not leave the infrared ray receiver barely in sunlight or bright light. Please change the batteries of low electricity in time.
System Connection 11 Before the system connection, be sure to switch off the power source of this unit and other devices. There are three kinds of video outputs in the unit, namely component video, S-Video and composite video. You can select one of the available video outputs of the TV and then make the connection.
System Connection 12 The Rear Panel of the Unit The Rear Panel of the Unit In Audio Setup, set the "Digital Output Mode" to "LPCM Output" (For details, see "System Setup-Digital Audio Output" for reference). When using a digital signal output (coaxial optical), the Analog Output cable is not needed for connection.
13 RECORDER FRONT Video in Audio in or DV input When connecting with external signals, be sure to switch off the power source of the unit and other devices. The connection with front panel inputs. Other AV devices Select either CVBS or S-Video from the front panel inputs to connect.
Monitoring Mode 14 In Monitoring Mode, the system only displays external signals (CVBS, S-VIDEO, DV, TV, Y/Cb/Cr) selected by the user on the TV screen directly without conducting other operations. You can review the content of the external signals in Monitoring Mode.
15 There are various external signal inputs in the unit, including S-Video, composite video, TV tuning , DV input and stereo audio input. You can select any group of audio and video signals from these inputs for recording.
16 Recording Mode 1. Connect the system properly (see "System Connection: System Connection for Recording External Signals"), switch on the power, insert a recordable DVD+R or an non-finalized DVD+RW, and start playing the input source to output the signals to be recorded.
Recording Mode 17 2. Use the corresponding function keys of the remote controller, such as "RECORD", "PAUSE/STEP" and "STOP" to select from "Record, "Pause" and "Stop" functions in the recording process.
Timer Recording 18 This function enables the unit to start recording according to the preset requirement once the scheduled time is reached. After the recording is done, the unit is in standby status. To start timer recording, set up a recording schedule at first and configure the system according to the requirement.
Timer Recording 19 5. Setup the recording date This setting is done with the third control unit in "Item Editor" dialog box. Move the cursor, select the row, press the "SELECT" button to initiate the drop-down menu, as shown in the chart.
Timer Recording 20 6. Set up the starting time of recording: In the "Item Editor" dialog box, use the arrow buttons and the "SELECT" button to highlight the "Start" option and the input box. Enter a value between 0:00 and 23:59 with the number buttons and press the "SELECT" button to confirm.
Chapter Editing 21 For finalised discs, every title is made of only one chapter. There is no such function as selected chapter play or random programmed play of disc segments for such discs.
Chapter Editing 22 3. Press the "SELECT" button to make title selection option editable. 4. Enter the number of the title to be edited with number buttons, and then press the "SELECT" button, the system will play the title. At this time, various operations can be done for this title.
Disc Operation 23 The Disc Operation means something done to recordable discs in the drive, including browsing disc information, finalising a disc, removing disc content, deleting the last title, compatibility and write protection, etc.
Disc Operation 24 In the Disc Operation control bar menu, use the or button to select the "Record a New Title" item, press the "SELECT" button, and then the system will change to TV status. Press the "SOURCE button to switch to other input source.
Title Editing 25 1. TITLE 01/04/2004 13:09:58 SP 00:01:00 Different recorded programs make different titles. The titles may be edited In the Title Display mode, press the button to pop up the following dialog box. 1. Title Name. 2. Recording Date. 3. Starting Time of the Recording.
Play Mode 26 In the Play Mode, the unit serves as a high quality DVD player. To enter the Play Mode, do as follows. Connect the TV and the unit properly (See "System Connection" for relevant information). Turn on the TV and switch to AV input status.
Title directories of different DVD discs may vary somewhat. Some DVD discs might not have any title directory. For such discs, it is no use pressing the "SELECT" button. Play Mode 27 Enter the Title before Playing 1. This function is only available with DVD discs.
Play Mode 28 There are four playing modes for the unit, including Normal Play, Repeat Play, Program Play and Random Play. The operations are as follows. 1. Enter the control bar menu. 2. Press the , and "SELECT" buttons to select the first item in the control bar, Play Mode.
Play Mode 29 This function enables the system to play designated title, chapter or track according to the order you set. 1. Select the Play Mode Control value as "Program", and press the "SELECT" button. Press the or button to move the cursor between "File" and "Favourite/Program".
Play Mode 30 In this section, we will introduce how to control the play process. Most of the play process control operations can be done through the menu. The operations are as follows. 1. Enter the play control bar menu, use the arrow buttons to select the status-play item and press the "SELECT" button.
Play Mode 31 1. While playing a supported disc, press the "PAUSE/STEP" button, and the system will suspend playing 2. Press the "PAUSE/STEP" button again, and the picture will move one frame forward. 3. Press the "PLAY" button, and the system will restore normal playing.
Play Mode 32 For audio disc like MP3, you can select a track from the Disc Content list and play it. 1. Press the or button to move the cursor to the Disc Content List box, as shown in the right chart. 2. Press the or button to select a track, press the "SELECT" button, and the system will start playing the selected track.
Play Mode 33 1. In the playing status, press the "GOTO button to cycle through various options in the play control bar menu. With the above-mentioned operations, you can use the remote controller to enter the corresponding value and skip to the corresponding location directly.
Play Mode 34 Some DVD discs may have more than one kind of subtitle. You can select one of them as the output. 1. In the play control bar menu, select the "Subtitle" item. For some DVD discs, the pictures are shot from different angles at the same time.
System Setup 35 To satisfy customers with different characteristics and suit related devices of different qualities, the unit provides various functions. You can setup the system of the unit and regulate its operations to meet your taste and suit well with other related devices of yours.
System Setup 36 1. In the General Settings menu, select "Video Output Format" item and press "SELECT" button to drop down a menu. 2. Select Pal or NTSC. 3. Press "SELECT" button to confirm. This setting must be in accordance with the TV system, Otherwise the video output might not work properly.
System Setup 37 1. Enter the System Setup control menu. 2. Use the or button to select the "PLAYBACK" item. 3. Press the "SELECT" button to enter the Play Setting mode. The following chart is the Play Setting main menu. This setup can be done only in the No Disc or stop mode.
System Setup 38 After the setting of authorisation level is done, when the unit play a disc of such level, a password is required. If you forget the password, you can enter the super password. 3. Select the "Rating Level" list box, and press the "Factory" button to drop down a menu as shown in the chart on page 37.
System Setup 39 1. In the Recording Settings menu, use arrow buttons to select "Automatic Chapter Marker", and press the "SELECT" button to drop down a menu. After completing various settings in this section, further recording operations will take these settings as default value.
System Setup 40 OSD Language Settings Menu Language Settings Subtitle Language Settings Language Settings Some DVD discs may contain various subtitle languages.
System Setup 41 Note: 1. In the Language Settings menu, use the or button to select the "Audio Language" item, and press the "SELECT" button to drop down a menu, as shown in the following chart. 2. Use the or button to select the language you want and press the "SELECT" button.
System Setup 42 Be sure to connect the antenna properly before the channel scan operation. Make sure there are TV signals at the TV Signal Input. For the connection chart, please see the "Basic Information: System Connection for Recording External Signals" for reference.
Other Operations 43 1. In the normal working status, press the red button "STANDBY/ON" of the remote controller to enter the Standby status. In the Standby status, the VFD will display current time as a clock.
Appendix (Troubleshooting Guide) 44 Before contacting service personnel, please check possible causes according to the following instructions. Symptom No power No sound No picture No colour Disc cannot be played Possible Cause 1. Incorrect signal connection; 2.
Technical Specifications 45 Supported disc formats DVD, DVD+R/RW, DVD-R/RW SVCD, VCD, CD-DA, MP3, JPEG Supported recordable disc formats Recording format Recording quality SP Standard Play), SLP ( Sta.
Technical Specifications 46 Audio Specifications General Specifications Working Humidity Audio level: l.0~2.0 Vrms (l0k load) Frequency response: 4Hz~44KHz ( 2dB) S/N ratio 90dB Audio distortion + noise -65dB (1KHz) Output Input Audio Level 2.
PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL: (02) 9313 7111 FAX: (02) 9313 7555 www.palsonic.com.au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA: 1300 657 888.
Een belangrijk punt na aankoop van elk apparaat Palsonic DVD R 212 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Palsonic DVD R 212 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Palsonic DVD R 212 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Palsonic DVD R 212 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Palsonic DVD R 212 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Palsonic DVD R 212 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Palsonic DVD R 212 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Palsonic DVD R 212 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
