Gebruiksaanwijzing /service van het product TFTV100A van de fabrikant Palsonic
Ga naar pagina of 36
KITCHEN DVD PLAYER TFTV100A USER'S MANUAL.
- 1 - Table of Contents Table of Contents ------------------------------------------------------------- Important Safety Instruction ------------------------------------------------ FCC Notice -------.
- 2 - Important Safety Information CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
- 3 - Important Safety Instructions Note: Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use near water. Clean only with dry cloth. Do not block any ventilation openings. Maintain well ventilated conditions around the product.
- 4 - Important Safety Information Region code information: DVD players and discs are coded by region. If the region number described on the DVD disc does not correspond to the region number of this product, this product cannot play the disc. The region code of this unit is 4.
- 5 - FCC Notice Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
- 6 - Characteristic Features This product incorporates a DVD player, LCD display, TV receiver and radio function in one system. It is designed for convenient use in the kitchen.
- 7 - Disc Information Disc Formats Supported By This Player DISC LOGO DIAMETER PLAYBACK TIME/ PLAYABLE SIDES 133 min (SS-SL) 242 min (SS-DL) 266 min (D S-SL) 12cm 484 min (D S-DL) 41 min (SS-SL) 75 min (SS-DL) 82 min (DS-SL) DVD 8cm 150 min (DS-DL) 12cm 74 min CD 8cm 20 min JPEG 12cm The disc maker specifies the operation of some DVD discs.
- 8 - Front Panel Front Panel Drawing 1. POWER Button Press to enter or exit the STANDBY mode. 2. Disc Tray Used to load disc. 3. PLAY/PAUSE Button Press to start or pause playback under DVD mode. 4. STOP Button Press to stop playback under DVD mode. 5.
- 9 - Front Panel 9. Remote Sensor Receives the remote control signal for operation. 10. Display panel Displays the time, status, radio frequency and radio station number. When adjusting volume, the VOL and volume level will be displayed on the display panel for several seconds.
- 10 - Front Panel 1. FM radio status indicator 2. AM radio status indicator AM time indicator 3. PM time indicator 4. Hour or character indicators 5. Minute or character indicators 6. Character indicators 7. FM frequency unit of MHz indicator 8. AM frequency unit of KHz indicator Rear Panel Drawing 1.
- 11 - Remote Control Preparation Refer to the drawing and remove the battery receptacle. Insert the battery into the receptacle. Make sure the polarity matches the marks inside the component. Insert the receptacle into the remote control. Using the Remote Control Point the remote control towards the main unit when operating.
- 12- Remote Control Remote Control Drawing.
- 13 - Remote Control 1. POWER Button Press to access or exit the STANDBY mode. 2. SUBTITLE Button Press to select a subtitle language or to turn subtitles of f when a DVD with multi- subtitles is playing. 3. DVD Button Press to enter the DVD mode. 4.
- 14 - Remote Control 19. EJECT Button Press to open or close the disc tray. 20. AUDIO Button Press to access various audio languages, when the DVD disc contains multiple audio languages. 21. 0-9 Number Buttons Select numbers by pressing these buttons.
- 15 - System Connections Do not connect the power cord until all other connections have been made. Each time you restart the unit, it remembers the last function used.
- 16 - System Connections Connecting an Antenna Connect the supplied AM/FM antennas to listen to the radio. In order to improve the signal, move the AM loop antenna away from the system and other equipment. Extend FM antenna fully. Keep the FM antenna as horizontal as possible after connection.
- 17 - System Connections Connecting the Power Adapter This unit is powered via the switching power adapter (supplied). See the below figure for details: 1. Connect the AC adapter to the jack marked with "DC 12V IN" on the rear panel of the unit.
- 18 - Radio Function Radio Function Operation Press the AM/FM button on the remote control or SOURCE button on the front panel to enter the AM/FM radio mode. Press and hold the SEEK+/SEEK- button for about 1.5 seconds to start searching forward/backward from the current frequency.
- 19 - TV Function EXIT TV SETUP Basic Operation Connect the antenna to the antenna jack on the rear panel. After connecting the antenna, connect the power supply cord. If the player is in standby mode, press the POWER button to turn on the power. Press the TV button on the remote control or the SOURCE button on the front panel to shift to TV mode.
- 20 - TV Function Use the / (CH+/CH-) buttons to select the item you want to set. Use the / (VOL+/VOL-) buttons to select the item and enter it. First use the / (CH+/CH-) buttons to highlight TV SETUP, and press the button to exit from the TV SETUP menu and press the button to return to the PICTURE setup menu.
- 21 - TV Function The auto memory will take a few minutes. The unit will search channels from the lowest channel to the highest channel in the standard channel list. When tuning operations are complete, the unit will exit and store the channels by sequence in the memory.
- 22 - TV Function Power on To set the playback start time of the signal source, use the number buttons to input the desired start time in sequence of hour, minute.
- 23 - AV Function A/V Function The player has an additional A/V input so it can function as a monitor for a DVD player, video cassette player, satellite receiver, video games, etc. When an A/V source is connected, press the A/V button on the remote control to enter SOURCE button on the front panel to enter external input A/V mode.
- 24 - Play Operation Preparation 1. 2. 3. 4. 5. 6. Install the unit in the kitchen, refer to page 31 for details. After connecting the unit to the AC power, turn on the unit's power by pressing the POWER button. Press the DVD button on the remote control or the SOURCE button on the front panel to shift to DVD mode.
- 25 - Play Operation CD Playback The player will play all tracks on a CD disc by default. You can use the / buttons or number buttons to select a track. JPEG Playback JPEG is a common picture format that requires small amounts of storage per image and has low loss in resolution.
- 26 - Playback Functions Stop During playback, press the STOP button once to stop playback of a disc. Press the PLAY button, and the DVD Player will resume playback of the disc from the point where it was stopped. Pause Press the PAUSE button once to pause playback.
- 27 - Playback Functions Search By Time During DVD disc playback, press the GOTO button on the remote control once, there will be a menu displayed on the screen. You can set or select items for your preference. Use the / (CH+/CH-) buttons to select items, press the OK button to enter and use the / (CH+/CH-) buttons to select the items.
- 28 - System Setup DVD Setup You can customise the set up menu options to your liking. Press the "DVD SETUP" button on the remote control to display the setup menu. The menu will include "General Setup", "Speaker Setup", "Dolby Digital Setup", "Video Setup" and "Preference Setup".
- 29 - System Setup Dolby Digital Setup Dual Mono The function is used to select from Stereo, Left only, Right only, and Mixed mono. Dynamic Use this item to adjust the linear dynamic compression rate to get different signal compression effects.
- 30 - System Setup Default Reset Use this function to reset the unit to the factory default settings. NOTE: For preference settings, the unit must be in the stop mode. LCD Setup Under DVD mode, press the TV/LCD SETUP button, there will be a menu will be displayed on the screen.
- 31 - Installing the Unit In Kitchen Installing the unit under a cabinet The player may be installed in the kitchen with or without the spacer. The suggested mounting position of the unit is under a wall cabinet.
- 32 - Installing the Unit In Kitchen 2. 3. If the cabinet door overhangs the shelf and obstructs the unit, adjust the unit or the shelf height for clearance. Install the unit with the supplied mounting screws. Quick hints Since the unit is rather heavy, be careful while doing the fixing work.
- 33 - Troubleshooting SYMPTOM CHECK ITEM The player cannot play. Make sure a disc is loaded. Make sure the disc is loaded with label side up. Disc should be clean, not dirty or warped. Player's region code should be the same as the region code of the DVD disc.
- 34 - Specifications 30W LCD screen size 10.2 inches Laser Wavelength Wavelength: 780/650nm Video System PAL Frequency Response 20Hz~20kHz ±2.5dB Audio Signal-to-Noise 85 dB Audio distortion + noise < -70dB (1KHz) Channel Separation > 70dB (1KHz) Dynamic Range >80dB (1KHz) System PLL AM 531~1602kHz Radio Frequency Range FM 87.
PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL: (02) 9313 7111 FAX: (02) 9313 7555 www.palsonic.com.au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA: 1300 657 888.
Een belangrijk punt na aankoop van elk apparaat Palsonic TFTV100A (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Palsonic TFTV100A heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Palsonic TFTV100A vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Palsonic TFTV100A leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Palsonic TFTV100A krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Palsonic TFTV100A bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Palsonic TFTV100A kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Palsonic TFTV100A . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
