Gebruiksaanwijzing /service van het product AK-HC1500G van de fabrikant Panasonic
Ga naar pagina of 52
AK-HC1500G UL TI FORMA T DIGIT AL CAMERA SYSTEM Multi Purpose Camera AK-HC1500G Before attempting to connect, oper ate or adjust this product, please read these instructions completely .
indicates saf ety inf ormation. CA UTION RI SK O F EL EC TR I C SH OC K D O NO T OP EN CA UTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NO T REMO VE COVER (OR BA CK). NO USER SER VICEABLE P ARTS INSIDE. REFER TO SER VICING T O QUALIFIED SER VICE PERSONNEL.
- 2 (E) - ENGLISH indicates saf ety inf ormation. CA UTION: TO RE D U C E T H E R I S K O F F I RE OR S H O C K H A ZA R D A N D A N NOYI N G INTERFERENCE, USE THE RECOMMENDED A CCESSORIES ONL Y .
- 3 (E) - 1) Read these instr uctions. 2) Keep these instructions. 3) Heed all war nings. 4) Follow all instructions. 5 ) Do not use this apparatus near water . 6) Clean only with dr y cloth. 7 ) Do not bloc k any v entilation openings. Install in accordance with the manuf acturer’s instructions.
- 4 (E) - ENGLISH Information on Disposal f or Users of W aste Electrical & Electronic Equipment (private households) This symbol on the products and/or accompanying documents means that used electrical and electronic products should not be mixed with general household waste.
- 5 (E) - Contents Accessories Accessories .......................................... 5 Introduction ........................................... 6 Characteristics ...................................... 6 Precautions for use ...........................
- 6 (E) - ENGLISH Intr oduction Characteristics New 2/3˝ 1 million-pixel CCD is emplo yed. [1280(H) 720(V)] 1 million-pix el CCD is 2/3˝ in size , being compact and light-weight.
- 7 (E) - Do not attempt to disassemble the camera or other units. In order to prev ent electric shock, do not remov e screws or cov ers. There are no user-serviceable par ts inside. Do not abuse the camer a. A void striking, shaking, etc. The camera contains sensitive components which could be damaged by improper handling or storage.
- 8 (E) - ENGLISH Major operating contr ols and their functions .
- 9 (E) - Major operating contr ols and their functions Lens mount 2/3” standard bayonet type (B4 mount) lens is installed. Lens fixing ring knob Lens is fix ed by turning the knob clockwise .
- 10 (E) - ENGLISH HD SDI output connector [HD SDI OUT] SDI signal output is given b y this line. G/L input connector [G/L IN] F or gen-lock with the camer a, the e xternal sync signal (black b urst) or tri-lev el sync signal is supplied to this input connector .
- 11 (E) - T ally output connector [T ALL Y OUT] The R tally and G tally signals are output from this connector . These signals take eff ect when the optional card for studio applications has been inser ted.
- 12 (E) - ENGLISH Ho w to install Be sure to ask the dealer for the installation, adjustment and connection of this equipment. How to set the lens Standard 2/3” bay onet type (B4 mount) lens of any maker s can be used*. T ur n the lens fixing ring knob counterclockwise to remov e the lens mount cap.
- 13 (E) - Ho w to set up the system Configuration example 1: Connection of camera contr oller Use multi cab le supplied with AK-HRP150G f or the connection of camera controller AK-HRP150G and this unit. Bef ore connecting the cables, be sure to set the po wer s witch of AC adapter to OFF .
- 14 (E) - ENGLISH Ho w to set up the system Configuration example 2: High-Speed P/T system Cable kit A W-CAK4HIG Lens Multi purpose camera AK-HC1500G Monitor IRIS HD SDI A C adapter A W-PS505A ZO.
- 15 (E) - Operation pr ocedure 1 T urn on the power of each equipment. 2 Properl y adjust the light for the object. 3 Adjust the flange back of the lens, the iris and the focus. Flange back m ust be adjusted when the camera is used f or the first time or after replacement of the lens.
- 16 (E) - ENGLISH Ho w to adjust Flange back adjustment (f or zoom lens) The adjustment is to adjust the f ocus in all the range from the maximum z oom to the widest angle of the zoom lens . Shoot a dark object to open the iris. Adjust the distance from the object to 6.
- 17 (E) - Ho w to adjust White balance adjustment Adjust the white balance after shooting a white object by at least 50% of the screen. NO TE: If the white signal lev el is ov er 100% or less than 50%, the white balance may not be normally adjusted.
- 18 (E) - ENGLISH Black balance adjustment Adjust it with the lens closed. When the motor drive lens is controlled from the camera, adjusting the b lack balance causes the lens to be automatically closed.
- 19 (E) - Setting of menu items How to displa y the menus T wo methods are used to display the men us. Using AK-HC1500G multi purpose camera to displa y the menus: Hold do wn the MENU s witch on the rear panel of the main unit f or at least 3 seconds to displa y the TOP men u.
- 20 (E) - ENGLISH Setting of menu items DETECTION [READ Y , A CTIVE] F or automatically correcting the blac k shading. CORRECT(DIG) [OFF , ON] F or ON/OFF control of the detection correction. MAINTENANCE menu MAINTENANCE 1.BLACK SHADING 2.PEDESTAL,GAMMA 3.
- 21 (E) - Setting of menu items MAINTENANCE menu PEDESTAL,GAMMA(1/2) M PEDESTAL :+000 R PEDESTAL :+000 B PEDESTAL :+000 M GAMMA :0.45 R GAMMA :+00 B GAMMA :+00 M BLACK GAMMA :+00 R BLACK GAMMA :+00 B BLACK GAMMA :+00 GAMMA :ON BLACK GAMMA :ON M PEDEST AL [–200 to +200] F or adjusting the blac k lev el.
- 22 (E) - ENGLISH Setting of menu items B BLA CK GAMMA [–15 to +15] F or adjusting the gamma characteristics of the blue in the vicinity of the b lack in relation to the master gamma characteristics. GAMMA [OFF , ON] F or turning the gamma correction ON or OFF .
- 23 (E) - Setting of menu items R FLARE [000 to 100] G FLARE [000 to 100] B FLARE [000 to 100] F or adjusting the flare correction. FLARE [OFF , ON] F or turning the flare correction ON or OFF .
- 24 (E) - ENGLISH Setting of menu items �� KNEE,WHITE CLIP(1/2) �� M KNEE POINT :95.00% R KNEE POINT :+00.00% B KNEE POINT :+00.00% M KNEE SLOPE :50 R KNEE SLOPE :+00 B KNEE SLOPE :+00 A.KNEE POINT :95.00% A.KNEE LEVEL :108% M WHITE CLIP LVL :109% R WHITE CLIP LVL :+00% B WHITE CLIP LVL :+00% MAINTENANCE menu M KNEE POINT [80.
- 25 (E) - Setting of menu items A. KNEE POINT [80.00% to 107.00%] F or setting the auto knee break point position. This setting does not take eff ect when a setting other than A UTO is selected f or KNEE or ON is selected as the DRS setting when the VIDEO MENU has been selected or when the FILM MENU has been selected.
- 26 (E) - ENGLISH �� KNEE,WHITE CLIP(2/2) �� KNEE :MANUAL WHITE CLIP :ON HIGH COLOR :OFF Setting of menu items MAINTENANCE menu [4] KNEE, WHITE CLIP KNEE [OFF , MANU AL, A UT O] F or selecting the knee operation mode. This setting does not take eff ect when FILM REC is selected.
- 27 (E) - Setting of menu items �� DETAIL(1/2) �� DETAIL :ON TOTAL DTL LEVEL :+00 H DTL LEVEL :11 CRISP :02 LEVEL DEPENDENT :2 PEAK FREQUENCY :10 KNEE APERTURE :ON KNEE APE LEVEL :3 MAINTENANCE menu DET AIL [OFF , ON] F or turning all the detail functions ON or OFF .
- 28 (E) - ENGLISH Setting of menu items SLIM DET AIL [OFF , ON] F or setting the detail more finely at ON. DET AIL(+) [–31 to +31] F or adjusting the detail gain in the + direction. DET AIL(–) [–31 to +31] F or adjusting the detail gain in the – direction.
- 29 (E) - Setting of menu items MAINTENANCE menu �� SKIN TONE DETAIL �� SKIN TONE DTL :OFF SKIN GET :OFF SKIN DTL CORING :5 Y MAX :190 Y MIN :010 I CENTER :055 I WIDTH :090 Q WIDTH :010 Q PHASE :+000 SKIN T ONE DTL [OFF , ON] F or turning the SKIN T ONE DTL ON or OFF .
- 30 (E) - ENGLISH Setting of menu items MAINTENANCE menu [8] GAIN, AUT O IRIS �� GAIN,AUTO IRIS �� LOW GAIN :0dB MID GAIN :9dB HIGH GAIN :18dB A.
- 31 (E) - Setting of menu items MAINTENANCE menu �� S.GAIN(1/2) �� S.GAIN1 MODE :S.GAIN1 � TOTAL GAIN :42dB GAIN :30dB PIX MIX :+6dB V MIX :+6dB FRAME MIX :OFF H DETAIL LEVEL :1 CRISP :00 LEVEL DEPENDENT :5 PEAK FREQUENCY :2 These settings are perf ormed when S.
- 32 (E) - ENGLISH Setting of menu items MAINTENANCE menu [9] SUPER GAIN LEVEL DEPENDENT [0 to 15] F or removing the detail in the dark areas. The higher the number set, the wider the range in which the detail is remov ed. PEAK FREQUENCY [0 to 31] F or setting the H DTL peak frequency .
- 33 (E) - Setting of menu items MAINTENANCE menu �� FRAME MODE �� SCAN REVERSE :OFF FRAME RATE RANGE :60-6 FRAME RATE :60 SCAN REVERSE [OFF , REVERSE1 to 3] F or selecting the video output scanning method.
- 34 (E) - ENGLISH Setting of menu items MAINTENANCE menu �� MATRIX �� MATRIX TABLE :A MATRIX R-G :+00 MATRIX R-B :+00 MATRIX G-R :+00 MATRIX G-B :+00 MATRIX B-R :+00 MATRIX B-G :+00 MA TRIX T ABLE [A, B] F or selecting the table in which the matrix data is to be stored.
- 35 (E) - Setting of menu items �� COLOR CORRECTION(1/2) �� SAT PHASE R +00 +00 Mg +00 +00 B +00 +00 Cy +00 +00 G +00 +00 Yl +00 +00 �� COLOR CORRECTION(2/2) �� SAT PHASE R-Mg +00 +00.
- 36 (E) - ENGLISH Setting of menu items SETTING menu � SETTING � 1.MODE 2.SHUTTER 3.GEN-LOCK 4.PIX DEFECT 5.PROTOCOL MODE(1/2) D5600K :OFF GAIN SELECT :LOW CAM ID :BAR CAM ID POSI :1 MATRIX TABLE :OFF COLOR CORRECTION :OFF DIGITAL EXTENDER :OFF BAR SEL :FULL(16:9) FORMAT :1080/59.
- 37 (E) - Setting of menu items CAM ID POSI [0 to 3] F or selecting where the camera ID is to be displa yed. 0: top left, 1: top right, 2: bottom left, 3: bottom r ight MA TRIX T ABLE [OFF , A, B] F or selecting OFF , A or B as the matrix setting. COLOR CORRECTION [OFF , ON] F or turning the color correction function ON or OFF .
- 38 (E) - ENGLISH Setting of menu items FORMA T [720/60p, 59.94p, 50p, 1080/60i, 59.94i, 50i, 1080/30p, 29.97p, 25p, 24p, 23.98p] F or selecting the video output f ormat.
- 39 (E) - ABB OK: When the automatic blac k balance has been adjusted satisf actorily . OUT RANGE RGB: When the automatic blac k balance has not been adjusted satisf actorily . (“RGB” denotes the colors which were not balanced properly .) MENU ON B AR [OFF , ON] F or selecting whether the menu is to be displa yed with the color bars .
- 40 (E) - ENGLISH Setting of menu items SETTING menu SHUTTER SHUTTER MODE :OFF SHUTTER SPEED :1/100 SYNCHRO SCAN :60.32Hz SHUTTER MODE [OFF , ON, SYNCHRO] F or selecting the operation mode of the shutter . OFF: F or turning the shutter OFF .
- 41 (E) - Setting of menu items GEN-LOCK GEN-LOCK INPUT :BNC H PHASE-COARSE :+00 H PHASE-FINE :+000 SD HD PHASE CRS :+0 SD HD PHASE FINE :+00 SETTING menu GEN-LOCK INPUT [BNC, DSUB] F or selecting whether the sync signals are to be input from the BNC or D-SUB connector .
- 42 (E) - ENGLISH Setting of menu items PROTOCOL PROTOCOL :1 SETTING menu PRO T OCOL [1 to 4] F or selecting the remote control communication system in accordance with the system connected.
- 43 (E) - Setting of menu items CAMERA ID menu CAMERA ID ID:AK-HC1500 An ID of not more than 10 characters consisting of alphanumerics, symbols and spaces can be set f or the camera.
- 44 (E) - ENGLISH Setting of menu items FILE OPERA TION menu FILE OPERATION MODE :LOAD LOAD FROM :USER1 EXECUTE :NO FILE OPERATION MODE :STORE STORE TO :USER1 EXECUTE .
- 45 (E) - Setting of menu items TIME CODE menu TIME CODE RESET HOUR :00 MINUTE :00 SECOND :00 FRAME :00 PRESET TIME CODE is displa yed only when FILM MENU has been set and either the 720/60p or 720/59.94p f ormat has been selected. RESET F or resetting the time code to zero .
- 46 (E) - ENGLISH Setting of menu items Menu list Scene file items indicated by “ ” MAINTENANCE 1.BLACK SHADING DETECTION CORRECT(DIG) 2.
- 47 (E) - Setting of menu items Scene file items indicated by “ ” MAINTENANCE 6.DET AIL SLIM DTL DET AIL(+) DET AIL( –) DET AIL CLIP DET AIL SOURCE 7.SKIN T ONE DTL SKIN T ONE DTL SKIN GET SKIN DTL CORING Y MAX Y MIN I CENTER I WIDTH Q WIDTH Q PHASE 8.
- 48 (E) - ENGLISH Setting of menu items Scene file items indicated by “ ” MAINTENANCE 12.COLOR CORRECTION R SA T/PHASE Mg SA T/PHASE B SA T/PHASE Cy SA T/PHASE G SA T/PHASE .
- 49 (E) - 3-9/16 (90) 6-5/16 (160) 15/32 (12) 17/32 (13.2) AK-HC1500G UL TI FORMA T DIGIT AL CAMERA SYSTEM 4-5/8 (117) Appearance Unit: inch (mm).
- 50 (E) - ENGLISH Specifications Image pickup de vice: 2/3” 1 million-pix el IT , CCD 3 System: GBR image pickup system Resolving optical system: F1.4 prism Optical filter: ND; CLEAR, 1/4, 1/16, 1/64 Lens mount: Ba yonet type Output format: 1080: 60i/59.
- 51 (E) - Appendix Control cab le for inf ormation camera Connector: 17JE-23150-02(D8A6) (made by Daiichi Denshi K ogyo) Cover: DE-C8-J9-F5-1R (made by Japan A viation Electronics Industry , Ltd.) Connector: DHW10-153F200 (made by Adv anced Connectek Inc.
Een belangrijk punt na aankoop van elk apparaat Panasonic AK-HC1500G (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Panasonic AK-HC1500G heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Panasonic AK-HC1500G vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Panasonic AK-HC1500G leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Panasonic AK-HC1500G krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Panasonic AK-HC1500G bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Panasonic AK-HC1500G kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Panasonic AK-HC1500G . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
