Gebruiksaanwijzing /service van het product AK-HCU200E van de fabrikant Panasonic
Ga naar pagina of 40
Operating Instructions <Operations and Settings> Camera Control Unit ModelNo. AK-HCU200P ModelNo. AK-HCU200PS ModelNo.
2 Contents Picture monitor (PM) displays 3 S w i t c h i n g t h e d i s p l.
3 Picture monitor (PM) displays Switching the display Display the camera statuses, warnings, and other information on the picture monitor using the operation panel of the ROP Press the CHARA butto.
4 Description of information displayed W ARNING The warning information is displayed when trouble is detected in the unit, camera, or optical fiber multi cable The warning information items.
5 Status displays (page 1 of 4) From the status display screen, press the CHARA button of the ROP to display the first page of the status displays 1/4 -STATUS1- CAM NO.
6 Status displays (page 3 of 4) From the status displays (page 2 of 4) screen, press the CHARA button of the ROP to display the third page 3/4 -STATUS3- DOWNCONVERT MODE SC UPCONVERT MODE S.
7 Operation displays (manual) The operation displays appear at the bottom of the screen for 4 seconds when any of the following operations have been performed with the operation panel of the R.
8 *1: [AUTO NG1 detailed information] The AUTO NG1 detailed information is displayed flashing on the screen Rch OUT RANGE Gch OUT RANGE Bch OUT RANGE A WB LOW LIGHT A WB HIGH LIGHT *2: [AUTO SETUP .
9 Menu operations While viewing the menu screen of the picture monitor , operate the MENU button and SELECT dial on the front panel MENU button SELECT dial Displaying and hiding the menus 1 Hold.
10 Changing the setting value of a setting item A number of items and the set values are displayed on the setting screen at the lowest level 1 T urn the SELECT dial to move the cursor to the men.
1 1 Setting menu items TOP MENU This is the first screen displayed when you hold down the MENU button Select one of the menus TOP MENU OPERATION MAINTENANCE OPERA TION Select this to ope.
12 SETTING2 Screen This is the selection screen for the SETTING2 menu Moving the cursor to the “SETTING2” menu title and then pressing the SELECT dial redisplays the OPERA TION menu one level up SETTING2 FS DELAY NORMAL HD BAR SELECT ARIB BAR LPF 7TAP BAR USER1 75%WHITE BAR USER2 0%BLACK SETUP 7.
13 HD/SD PHASE Screen This menu is used for the HD signal and SD signal phase adjustments Moving the cursor to the “HD/SD PHASE” menu title and then pressing the SELECT dial redisplays .
14 SD signal phase <1080i/5994 Hz format> Setting of SD-HD V item: 0H 2 3 4 5 6 1 122 1 123 1 124 1 125 1 2 3 4 5 6 7 1 122 1 123 1 124 1 125 1 2 3 4 5 6 7 2 3 4 5 6 GEN LOCK Black bu.
15 Setting of SD-HD V item: 0H_SD_DLA Y (1FRAM–90H DL Y) 2 3 4 5 6 1 122 1 123 1 124 1 125 1 2 3 4 5 6 7 1 122 1 123 1 124 1 125 1 2 3 4 5 6 7 2 3 4 5 6 GEN LOCK Black burst signal CCU_VBS/SDI (SD)_.
16 Setting of SD-HD V item: ADV ANCE (75H) 1 122 1 123 1 124 1 125 1 2 3 4 5 6 7 1 122 1 123 1 124 1 125 1 2 3 4 5 6 7 624 625 1 2 3 4 624 625 1 2 3 4 GEN LOCK Black burst signal CCU_VBS/SDI (SD)_OUT .
17 Setting menu items (Continued) HD signal phase <1080i/5994 Hz format> Setting of SD-HD V item: 0H 1 122 1 123 1 124 1 125 1 2 3 4 5 6 7 1 122 1 123 1 124 1 125 1 2 3 4 5 6 7 1 122 .
18 Setting menu items (Continued) Setting of SD-HD V item: 0H_SD_DLA Y (1FRAM–90H DL Y) 1 122 1 123 1 124 1 125 1 2 3 4 5 6 7 1 122 1 123 1 124 1 125 1 2 3 4 5 6 7 1 122 1 123 1 124 1 125 1 2 3 4 5 .
19 Setting menu items (Continued) Setting of SD-HD V item: ADV ANCE (75H) 1 122 1 123 1 124 1 125 1 2 3 4 5 6 7 1 122 1 123 1 124 1 125 1 2 3 4 5 6 7 1 122 1 123 1 124 1 125 1 2 3 4 5 6 7 624 625 1 2 .
20 BAR ID Screen This menu is used to set the BAR IDs displayed on the color bars Moving the cursor to the “BAR ID” menu title and then pressing the SELECT dial redisplays the OPERA TIO.
21 INCOM/MIC Screen This menu is used for the unit’s intercom settings Configure the camera’s intercom setting on the camera Moving the cursor to the “INCOM/MIC” menu title and t.
22 ST ART UP Screen This menu is used to set the control that is performed when the unit’s power is turned on Moving the cursor to the “ST ART UP” menu title and then pressing the SEL.
23 NETWORK Screen This menu is used for the network settings Moving the cursor to the “NETWORK” menu title and then pressing the SELECT dial redisplays the MAINTENANCE menu one level up NETWORK IP ADDRESS 192.168.0.20 SUBNET MASK 255.
24 PM VIEW SETTING Screen This menu is used to set ON or OFF for the items (IRIS, status display) to display on the picture monitor Moving the cursor to the “PM VIEW SETTING” menu title and then pressing the SELECT dial redisplays the MAINTENANCE menu one level up PM VIEW SETTING CAMERA NO.
25 SYSTEM Screen This menu is used to initialize the menu settings Moving the cursor to the “SYSTEM” menu title and then pressing the SELECT dial redisplays the MAINTENANCE menu one lev.
26 Web settings Y ou can connect the unit and a computer, and configure various settings from the Web browser screen Use a LAN cable (crossover cable) to directly connect the unit’s LAN connector.
27 Item setting operations (settings) The current settings are displayed on the setting screen When you change a setting and then select the “SET” button on the screen, the new value is.
28 SETTING2 Screen indicates the factory default setting Item Setting value Remarks FS DELA Y NORMAL SHORT Select the delay mode for the HD return signals NORMAL: Matches return signal i.
29 HD/SD PHASE Screen This menu is used for the HD signal and SD signal phase adjustments indicates the factory default setting Item Setting value Remarks HD H PHASE 5994 Hz: –1099 .
30 BAR ID Screen This menu is used to set the BAR IDs displayed on the color bars indicates the factory default setting Item Setting value Remarks BAR ID SWITCH ON OFF Set the display of.
31 INCOM/MIC Screen This menu is used for the unit’s intercom settings Configure the camera’s intercom setting on the camera indicates the factory default setting Item Setting val.
32 ST ART UP Screen This menu is used to set the control that is performed when the unit’s power is turned on indicates the factory default setting Item Setting value Remarks CAM POWER.
33 NETWORK Screen This screen displays the network addresses On this screen, the addresses cannot be changed Item Remarks IP ADDRESS Displays the IP address SUBNETMASK Display.
34 PM OPERA TION ST A TUS Screen This menu is used to set ON or OFF for the operation items to display on the picture monitor indicates the factory default setting Item Setting value Re.
35 T able of adjustment setting ranges Names in [ ] apply when menu operations are performed from a computer using a Web browser OPERA TION menu Menu Item Adjustment setting range Initial .
36 Menu Item Adjustment setting range Initial value INCOM/MIC (pages 21 and 31) 4W/RTS IN LEVEL –400dB to 200dB (05dB increments) 0dB 4W/RTS OUT LEVEL –400dB to 200dB (05dB incre.
37 Menu Item Adjustment setting range Initial value PM OPERA TION ST A TUS (pages 24 and 34) ST A TUS DISPLA Y TIME 0, 2, 4 [0 sec, 2 sec, 4 sec] 4 [4 sec] MASTER GAIN [MANUAL OPERA TION ST A TUS MAST.
38 Connector pin assignment table [COMMUNICA TION] JBY -25S-1A3F(LF)(SN) (JST Mfg Co, Ltd) Pin No Signal Flow of signals Remarks 1 INCOM 1 OUT (H) CCU → SYSTEM 0 dBm, 600 Ω (4.
39 [MIC OUT 1], [MIC OUT 2] HA16RV -3PG(76) (Hirose Electric Co, Ltd) Pin No Signal Flow of signals Remarks 1 SHIELD 0 dBm, 600 Ω 2 HOT CCU → SYSTEM 3 COLD CCU → SYSTEM [MSU] This connec.
Index A ANALOG GAIN Screen .
Een belangrijk punt na aankoop van elk apparaat Panasonic AK-HCU200E (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Panasonic AK-HCU200E heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Panasonic AK-HCU200E vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Panasonic AK-HCU200E leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Panasonic AK-HCU200E krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Panasonic AK-HCU200E bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Panasonic AK-HCU200E kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Panasonic AK-HCU200E . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
