Gebruiksaanwijzing /service van het product AW-PB309P van de fabrikant Panasonic
Ga naar pagina of 20
AW- P WEB car d RST LINK/RX 10BASE – T RS232C RD Y Before attempting to connect, operate or adjust this product, please read these instructions completely.
2 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE.
3 Contents Introduction ....................................................................................................... 3 Precautions for use .......................................................................................... 3 Before use .
4 P ar ts and their functions 1 RST: Initial reset switch When this switch is held down for 3 or more seconds, the settings can be reset to the factory settings. It is capable of initializing the IP address and canceling the password. 2 RDY: Ready LED When this is lighted, it means that the card is operating normally.
5 Installation Ask your dealer to install the card in the camera. Bear in mind the following points when installing the card. ≥ Be absolutely sure to ask your dealer to install the card. ≥ Before installing the card, disconnect the camera’s power supply.
6 System upgrading O I [1] Connections An example of the basic connections is presented below. [2] Recommended system requirements 1) Personal computer Provide a Windows-compatible personal computer (.
7 System upgrading 1 Right click on the desktop’s My Network icon, and open Properties. 2 Select “TCP/IP” under the Network Settings tab, and click the Properties button. 3 Now set the IP address and net mask. IP address : 192.168.1.100 Net mask : 255.
8 System upgrading 1. Start up the browser. 2. Input the following address into the browser. http://192.168.1.50/config/config.html 3. A setting screen such as the one shown in the figure below now appears. Input the addresses. 4. Upon completion of the input, press the button at the bottom of the setting screen.
9 Image displa y method When this address is input, an image such as the one shown in Fig. 1 appears. (The image is a sample.) HIGH is set for the image quality and VGA (640 a 480) is set for the size in the initial status. To change the image quality or size, click the button under the image.
10 Config screen A number of different settings can be performed on the Config screen. 1 . Start up the browser. 2. Input the following address into the browser. http://(new IP address setting)/config/config.html The following address is used in the factory setting status: http://192.
11 Config screen 1 Network Set the IP address, net mask and gateway address in the fields provided here. Consult your network administrator for details on the addresses. After setting the information, you must click the 4 button. Bear in mind that the settings will not take effect unless this button is clicked.
12 P ass wor ds Three kinds of passwords can be set for the WEB card so that three levels of access restriction can be established. 1) Monitor password 2) Operation password 3) Management password Types of passwords Each password serves to restrict the kinds of operations that a user can perform.
13 P ass wor ds 3) Management password This is used to restrict access to the Config screen. The following window appears when the Config screen has been accessed. Input “management” into the user name field, and input the password which was set on the Config screen into the password field.
14 P ass wor ds The following anomalies do not indicate that something is wrong with the WEB card. What kind of window appears differs according to the type and version of the browser used. The following anomalies may appear due to the characteristics of the browser but they do not indicate that something is wrong with the WEB card.
15 External dimensions dra wing RST LINK/RX 10BASE – T RS232C RD Y 70 21.5 92 P an/tilt head and camera contr ol The pan/tilt head and camera can be controlled from the WEB card. ≥ The pan/tilt head that can be connected is the AW-PH350. (A dedicated software cable is required.
16 Bef ore requesting ser vice Item Power Checkpoint Is the RDY LED lighted? Status No Remedial action 1 Check whether the power adapter has been connected properly. 2 Check whether the camera’s power LED is lighted. 3 Check whether the WEB card has been correctly installed in the camera.
17 Specifications and accessories Dimensions (W a H a D) : 3-5/8˝ a 2-3/4˝ a 7/8˝ (92 a 70 a 21.5 mm) Weight : 0.22 lbs (100 g) Image compression system : JPEG Image quality : 3-level setting Screen size : 640 a 480, 320 a 240, 640 a 240 Image updating interval : 15 images/sec.
18.
19.
F0901T2012 @ Printed in Japan VQT9458-1 PANASONIC BROADCAST & TELEVISION SYSTEMS COMPANY DIVISION OF MATSUSHITA ELECTRIC CORPORATION OF AMERICA Executive Office: 3330 Cahuenga Blvd W.
Een belangrijk punt na aankoop van elk apparaat Panasonic AW-PB309P (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Panasonic AW-PB309P heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Panasonic AW-PB309P vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Panasonic AW-PB309P leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Panasonic AW-PB309P krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Panasonic AW-PB309P bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Panasonic AW-PB309P kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Panasonic AW-PB309P . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
