Gebruiksaanwijzing /service van het product AW-RP120G van de fabrikant Panasonic
Ga naar pagina of 44
Operating Instructions <Basics> Remote Camera Controller ModelNo. AW‑RP120G VQT4T93(E) M1212HO0-FJ ENGLISH z Die Bedienungsanleitung in Deutsch ist als PDF‑Datei in der CD‑ROM enthalten. (Seite 2) z Le mode d’emploi en français est fourni sous forme de fichier PDF sur le CD‑ROM.
2 ENGLISH p How to open the operating instruction manual PDF files Discontinue installation if the installation screen of the software opens as a result of inserting the CD‑ROM. When [INDEX.pdf] on the CD‑ROM is opened, a list of the operating instruction manuals will be displayed.
3 Read this first! W ARNING: Always keep memory cards or accessories out of the reach of babies and small children. W ARNING: Installation should only be performed by qualified installation personnel. Improper installation may result in the entire apparatus falling down and causing injury .
4 IMPORT ANT SAFETY INSTRUCTIONS 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water . 6) Clean only with dry cloth. 7) Do not block any ventilation openings.
5 Read this first! (continued) EMC NOTICE FOR THE PURCHASER/USER OF THE APP ARA TUS 1. Applicable standards and operating environment (A W‑RP120G) The apparatus is compliant with: • standards EN55103‑1 and EN55103‑2, and • electromagnetic environ ments E1, E2, E3 and E4.
6 About trademarks and registered trademarks Microsoft ® , Windows ® , Windows ® 7, and Internet Explorer ® are registered trademarks or trademarks of Microsoft Corporation in the United States, Japan, and/or other countries.
7 Introduction Overview This unit is a controller which is designed to control remote cameras. It can be used to control up to 100 remote cameras when IP connections are used, and up to 5 remote cameras when serial connections are used.
8 Features IP connections and serial connections supported IP connections Up to 100 remote cameras * 1 can be controlled via a network hub (switching hub). The unit’s auto IP setting function can be used to automatically assign and control the IP addresses of the remote cameras * 1 and switcher * 2 .
9 Accessories Check the accessories. After unpacking the product, dispose of the packaging material appropriately . CD‑ROM ..................
10 Precautions for installation In addition to the safety precautions given in “Read this first!”, also observe the following instructions. Be sure to ask your dealer to perform the installation and connection work for the unit.
1 1 Appearance Unit: mm (inch) 161 (6‑1 1/32) 77 (3‑1/32) 54 (2‑1/8) 342 (13‑15/32) 265 (10‑7/16) Mount angle attachment position 249.6 (9‑13/16) 12.4 (1/2) 51 (2) 140 (5‑1/2) 2‑M3 39 (1‑17/32) 74.3 (2‑15/16) 52.5 (2‑1/16) 17 (21/32) 317.
12 Parts and their functions Control panel Menu operation section Memory card section User button section Camera selection section Pan and tilt section Indicator section Color adjustment s.
13 5 F1 dial [F1] F2 dial [F2] Use these to operate the menus of the unit or the OSD menu of a remote camera. Use the CAMERA OSD button ( 4 ) to select which operation to perform.
14 Parts and their functions (continued) Focus, zoom and iris section > FOCUS dial [FOCUS] Use this to manually control the focus. During auto focusing (when the auto focus button [ ] indicator is on), operation is disabled.
15 Parts and their functions (continued) Color adjustment section BARS button [BARS] Use this to select the video signal output from the remote camera. Each press switches between the “signal for the images shot by the camera” and the “color bar signal”.
16 Parts and their functions (continued) R/B PED dials [R/B PED] Use these to individually adjust the pedestal of the R channel and B channel (R PED and B PED) in order to set the desired black balance. T urned clockwise : Displays the setting values of the R PED and B PED on the LCD panel and changes the value in the plus (+) direction.
17 Parts and their functions (continued) Number buttons [1] to [50] Use these to select menus, preset memory , and tracing memory . MEMOR Y SETTING button [MEM SETTING] Use this to set SPEED and SCOPE of the preset memory .
18 Parts and their functions (continued) Rear panel POWER switch [POWER] When the POWER switch is set to the ON position, the POWER indicator ( 1 ) lights, and the unit can be operated.
19 Basic operations of the unit 1. T urn on the unit’ s power. Set the POWER switch to the ON position. Power is supplied to the unit, and the POWER indicator turns on.
20 Basic operations for the menus 1. Set the MENU button to ON. Press the MENU button to turn on its indicator . 2. Select the target menu. Press any of the number buttons [21] to [50] to turn on its indicator . The selected menu is displayed on the LCD panel.
21 Connections Examples of IP connections IP connections for remote cameras (A W‑HE120, A W‑HE50S and A W‑HE60S) and A W‑HS50 HD integrated camera A W‑HE120 HD integrated cameras ( * ) A W‑HE120 SDI video signals Switching hub LAN cables (Straight cables) Max.
22 IP connections for multiple units and remote cameras (A W‑HE120, A W‑HE50 and A W‑HE60) HD integrated camera A W‑HE120 HD integrated cameras ( * ) A W‑HE120 Switching hub LAN cables (Straight cables) Max.
23 Examples of serial connections Serial connections for A W‑HE120 remote cameras ( * ) The illustration of the supplied AC adapter has been omitted. HD integrated camera A W‑HE120 HD integrated cameras ( * ) A W‑HE120 SDI video signals Switcher Monitor 1 Monitor 2 Monitor Monitor LAN cables (straight cables) Max.
24 Serial connection for a remote camera (A W‑HE50 or A W ‑HE60) LAN cable (straight cable) Max. 1000 m (3280 ft) External DC power supply Remote camera controller A W‑RP120 Supplied AC .
25 Connections (continued) Serial connections for A W‑PH400 and camera Supported camera: Any of AW‑HE870, AW ‑E860, A W‑E750, AW‑E650, AW ‑E350, AK‑HC1500 or AK‑HC1800 LAN cable (straight cable) External DC power supply Remote camera controller A W‑RP120 Protocol converter A W‑IF400 Zoom lens Max.
26 Connections (continued) Serial connections for A W‑PH650 and camera LAN cable (straight cable) Max. 1000 m (3280 ft) External DC power supply Remote camera controller A W‑RP120 Monitor .
27 Network settings of the unit T o control a remote camera connected via an IP connection from the unit, you need to set the network settings of the unit. Correct operation is not possible if the same IP address already exists in the same network.
28 Settable addresses 1.CAM1 192.168.000.001 Block 1 Block 2 Block 3 Block 4 For the IP address, you can set values within the following ranges. Block 1: 1 to 223 Block 2: 0 to 255 Block 3: 0 to 255 Block 4: 1 to 254 However , “127.000.000.001” cannot be set even though it is within the above ranges.
29 Settings for connecting with the remote cameras and switcher T o control remote cameras from the unit and use the function to link the unit and a switcher , you need to set the connection settings in advance. There are two ways of configuring the connection settings.
30 Settings for connecting with the remote cameras and switcher (continued) Setting the connection types (serial/IP/ no connection) for remote cameras 1. Set the connection types for camera numbers CAM1 to CAM100. Open CTRL TYPE menu [36] and turn the F1 dial to display the camera number to set.
31 192.168.000.010 192.168.000.011 192.168.000.010 192.168.000.010 192.168.000.010 192.168.000.012 192.168.000.008 192.168.000.008 192.168.000.009 Remote camera A Remote camera B Remote camera C Switcher Unit CAM1 CAM3 CAM2 The subnet mask, default gateway , and port number settings are set the same as those for the unit.
32 When introducing additional remote cameras or a switcher into an environment in which IP connections are already in use The settings can be configured using “auto IP setting” even when introducing additional remote cameras or a switcher into an environment in which IP connections are already in use.
33 3. T urn the F2 dial to select “Y es”, and then press the F2 dial. “Auto IP setting” starts. During “auto IP setting”, the progress is indicated by the number of “ ” which are reduced one by one. 1.AUTO SET When all the operations have been completed successfully , the following message appears.
34 <Operating procedure> 1. Connect the additional remote cameras and switcher to be introduced and the unit to the network within the same subnet. 2. Open AUT O IP menu [37], turn the F2 dial to display “KEEP IP ADR” and press the F2 dial. 1.
35 Swapping connection destination IP addresses When “auto IP setting” is executed, the remote cameras are linked to the camera numbers of the unit and become able to be controlled from the unit. If the link settings are not as desired, you can use the following procedure to change the settings as you wish.
36 Setting the connection destination port number Set this when the remote camera needs to be identified by a port number such as when connecting via a router .
37 Selecting a camera group This unit allows you to register up to 100 remote cameras as control targets by configuring the connection settings for each of the camera numbers CAM1 to CAM100. T o select a remote camera to control from these cameras, you need to select the camera group to which it belongs beforehand.
38 Selecting a remote camera When the mode selection button [SELECT] indicator is on, you can press a camera selection button [CAMERA SELECT/GROUP SELECT] to select the remote camera to control. When a camera selection button is pressed, the indicator of the pressed button turns on and the remote camera is selected.
39 T roubleshooting Symptom Cause and Measure Reference Page Cannot turn the power of the unit on. Is external DC power being supplied? – Is the DC plug of the external DC power supply connected to the unit properly? – Cannot operate a remote camera.
40 Specifications Power supply: 12 V DC / 0.5 A (DC input range: 10 V DC to 16 V DC) Power consumption: 6 W indicates safety information. General Ambient operating temperature: 0 °C to 40 °C (32 °F to 104 °F) Allowable humidity: 10% to 90% (no condensation) Weight: Approx.
41 p x Menu [25] RP SETUP 6. GLOBAL AREA ......................................................................... 28 7. IP ADDRESS ............................................................................ 27 8. SUBNETMASK .........................
42 Memo.
43 Memo.
Information on Disposal for Users of W aste Electrical & Electronic Equipment (private households) This symbol on the products and/or accompanying documents means that used electrical and electronic products should not be mixed with general household waste.
Een belangrijk punt na aankoop van elk apparaat Panasonic AW-RP120G (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Panasonic AW-RP120G heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Panasonic AW-RP120G vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Panasonic AW-RP120G leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Panasonic AW-RP120G krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Panasonic AW-RP120G bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Panasonic AW-RP120G kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Panasonic AW-RP120G . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
