Gebruiksaanwijzing /service van het product DMC-FX12 van de fabrikant Panasonic
Ga naar pagina of 115
Panasonic Operating Instructions Digital Camera Mo_e, No. DMC-FX12 DMC-FXl0 LEICA DC VARIO-ELMARIT Before connecting, operating or adjusting this product, please read the instructions completely.
Before Use Dear Customer, We would like to take this opportunity to thank you for purchasing this Panasonic Digital Camera. Please read these Operating Instructions carefully and keep them handy for future reference.
Before Use THE FOLLOWING APPLIES ONLY IN THE U.S.A. FCC Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Before Use -If you see this symbol- Information on Disposal in other Countries outside the European Union This symbol is only valid in the European Union. If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method of disposal.
• Care of the camera • Do not strongly shake or bump the camera. This unit may malfunction, recording pictures may no longer be possible or the lens or the LCD monitor may be damaged. • We strongly recommend you do not leave the camera in your pants pocket when you sit down or forcefully insert it into a full or tight bag etc.
Contents Before Use Information for Your Safety ....................... 2 Preparation Standard Accessories ............................... 8 Names of the Components ....................... 8 Quick Guide ............................................ 10 Charging the Battery with the Charger .
• [ASPECT RATIO] Setting the aspect ratio ofpictures ... 60 • [PICT.SIZE]/[Q UALITY] Setting a picture size and quality that match your use of the pictures ............................................. 61 • [AF MODE] Setting the focus method ...
Preparation Standard Accessories Check that all the accessories are included before using the camera. 1 2 t CGA-S005A DE-A41B 3 4 K1HA08CD0013 5 7 VYQ3509 K1 HA08CD0014 6 VFC4090 1 Battery Pack (Indic.
4 5 6 7 89 4 LCD monitor (P32, 88) 5 Cursor buttons 41/Self-timer button (P39) • /[REV] button (P29) I_/Flash setting button (P35) A/Exposure compensation (P40)/ Backlight compensation in simple mode button (P26) In these operating instructions, the operations on the cursor button are described as illustrated as shown.
Preparation Quick Guide This is an overview of how to record and playback pictures with the camera. For each step, be sure to refer to the pages indicated in brackets. 1 Charge the battery. (Pll) 3 Turn the camera on to take pictures. • Set the clock.
Charging the Battery with the Charger The battery is not charged when the camera is shipped. Charge the battery before use. | Attach the battery with attention to the direction of the battery. 2 Connect the charger to the electrical outlet. Preparation 3 Detach the battery after charging is completed.
Preparation About the Battery (charging/number of recordable pictures) • The battery life The number of recordable pictures (By CIPA standard in normal picture mode [O]) Approx. 350 pictures (Approx. 175 min) Number of J (DMC-FX12)/ recordab!e PiCtUreS Approx.
Inserting and Removing the Battery/ the Card (optional) • Check that this unit is turned off. • Prepare a card. (optional) • You can record or play back pictures on the built=in memory when you are not using a card. (P14) ] Slide the release lever in the direction of the arrow and open the card/battery door.
Preparation About the Built-in Memory/the Card (optional) The built-in memory can be used as a temporary storage device when the card being used becomes full. • Built-in Memory [_] You can record or play back pictures with the built-in memory. (The built-in memory cannot be used when a card is inserted.
Setting Date/Time (Clock Set) [] • Initial setting The clock is not set so the following screen appears when you turn the camera on. ® (A_: [MENU/SET] button _9): Cursor buttons ] Press [MENU/SET]. 2 Press A/V/_I/I_ to select the date and time. Preparation 3 Press [MENU/SET] to set.
Preparation About the Mode Dial If you turn on this unit and then rotate the mode dial, you can not only switch between recording and playback but also switch to macro mode to take a close-up picture of a subject or to a scene mode that matches your recording purpose.
Setting the Menu • Displaying the menu screens Press [MENU/SET]. e.g.: The first page of the total 3 pages is displayed. Preparation 1 Press A/_' to select the menu item.
Preparation • Closing the menu screen Press [MENU/SET]. • When the mode dial is set to rr_]/ [Ii M you can i i I i also close the menu screen by pressing the shutter button halfway. • Switching to the [SETUP] menu | Press <1 on a menu screen.
• Power save mode is not activated in the following cases. -When using the AC adaptor (DMW-AC5PP; optional) -When connecting to a PC or a printer -When recording or playing back motion pictures -During a slide show (P70) EC0 [ECONOMY] (Turning off the LCD monitor automatically.
Preparation [a,)) [VOLUME] Press [ _ ] to display the [SETUP] menu and select the item to set. (P17) The volume of speakers can be adjusted in 7 steps from level 6 to O. • When you connect the camera to a TV, the volume of the TV speakers does not change.
LCD Monitor Display/ Switching the LCD Monitor Display • Screen display in normal picture mode [_ ] (Initial settings) 12 34 567 12 11 1 Recording mode 2 Flash mode (P35) • If you press the shutter button halfway when the flash is activated, the flash icon turns red.
Basic Taking pictures N] The camera automatically sets the shutter speed and the aperture value according to the brightness of the subject. 2 Aim the AF area at the point you want to focus on. 3 Press the shutter button halfway to focus. O: Shutter button • The status indicator _ lights for about 1 second when you turn this unit on _.
• You can switch the flash setting to match the recording. (P35) • When you press the shutter button, the LCD monitor may become bright or dark for a moment however the recorded picture will not be affected. • Be careful not to move the camera when you press the shutter button.
Basic • Direction detection function Pictures recorded with the camera held vertically are played back vertically (rotated). (Only when [ROTATE DISR] (P71) is set to [ON]) • Pictures may not be displayed vertically if they were taken with the camera aimed up or down.
• Settings in Simple mode [PICT.MODE] _I Suitable for enlarging the [ENLARGE] 3ictures to be printed to 8"x 10" size, letter size etc. @ Suitable for regular size [4"x 6"/ printing. 10x15cm] @ Suitable for attaching [E-MAIL] _ictures to e-mails or adding pictures to webeites.
Basic • You cannot use the following functions. -High angle mode - Exposure compensation - [D.ZOOM] - [BURST] - [COL.MODE] • You cannot set the following items. - [TRAVEL DATE] - [WORLD TIME] • The Backlight Compensation Backlight refers to when light comes from the back of a subject.
• Picture size and maximum zoom magnification (O: Available,--: Not available) DMC-FX12 [_/_}(7M) [_ (6M) 3× (&5M) [_] (5M EZ) 3.6× r_] (3M EZ) [_] (2M EZ) [_] (1M EZ) r_]/@ 4.5× (0.3M EZ) (2.5N EZ) E_ (2M EZ) x DMO-FXl0 m [_/_(6M) [_ (5M) 3× -- _ (4.
Basic A maximum of 12× zoom can be achieved with the 3× optical zoom and the 4× digital zoom when [D.ZOOM] is set to [ON] in the [REC] mode menu. However, if a picture size that can use extended optical zoom is selected, a maximum of 18× (DMC-FX12)/ 16.
Checking the Recorded Picture (Review) You can check the recorded pictures while still in [REC] mode. 1 Press • [REV]. © V • The last recorded picture appears for about 10 seconds. • Review is canceled when the shutter button is pressed halfway or the • [REV] is pressed again.
Basic Playing back/Deleting Pictures [] The picture data on the built-in memory is played back or deleted when a card is not inserted. The picture data on the card is played back or deleted when a card is inserted. (P14) Once deleted, pictures cannot be recovered.
• To delete [MULTI DELETE]/ [ALL DELETE] 1 Press [_] twice. 2 Press A/• to select [MULTI DELETE] or [ALL DELETE] and then press [MENU/SET]. A V MENU • [MULTI DELETE] _ step 3. • [ALL DELETE] _ step 5. • [ALL DELETE EXCEPT -_] (When [FAVORITE] (P70) is set only) step 5.
Advanced (Recording pictures) About the LCD Monitor CA} LCD monitor (LCD) Press [DISPLAY] to change. • When the menu screen appears, the [DISPLAY] button is not activated.
• Recording guide line When you align the subject on the horizontal and vertical guide lines or the cross point of these lines, you can take pictures with well-designed composition by viewing the size, the slope and the balance of the subject.
Advanced (Recording pictures) • If the mode dial is set [[] ] and [_ ], the Power LCD function only can be used. | Press [LCD MODE] for I second. m DISPLAY_LCDMODE 2 Press A/T to select a mode. A V [E._]: POWER LCD] [_o,H: HIGH ANGLE] The LCD monitor becomes brighter and easier to see even when taking pictures outdoors.
• Canceling Power LCD or High angle mode • If you press and hold [LCD MODE] again for 1 second the screen shown in step 2 is displayed. Select [OFF] to cancel Power LCD mode or High angle mode. • High angle mode is also canceled if you turn the camera off or power save mode is activated.
Advanced (Recording pictures) : AUTO/Red-eye reduction 1 The flash is automatically activated when the recording conditions make it necessary. It is activated once before the actual recording to reduce the red-eye phenomenon (eyes of the subject appearing red in the picture) and then activated again for the actual recording.
• The flash setting is memorized even if the camera is turned off. However, the scene mode flash setting is reset to the initial setting when the scene mode is changed. • Available flash range by ISO sensitivity ISO sensitivity ,Availab!e flash range (p60) ' [AUTO] Wide 30 cm (0.
Advanced (Recording pictures) • Shutter speed for each flash setting _. , Shutter speed Hash setting i _u_;j's-L. • : AUTO _: AUTO/ Red-eye reduction Elm: Forced ON _: Forced ON/ Red-eye reduction _: Slow sync.
Advanced (Recording pictures) Taking Pictures with • if you press [MENU/SET] while the self-timer is set, the self-timer setting is the Self-timer canceled. 2 Press Air to select a mode. A V ................ • When using a tripod etc., setting the I Press <1 [_].
Advanced (Recording pictures) Compensating the Exposure Use this function when you cannot achieve appropriate exposure due to the difference in brightness between the subject and the background. Look at the following examples. Underexposed Compensate the exposure towards positive.
Optical Image Stabilizer Advanced (Recording pictures) pictures while the demonstration screen is displayed.) Press I_ to exit the demonstration screen. This mode detects jitter and compensates for it, 1 Press and hold the optical image stabilizer button _) until [STABILIZER] appears.
Advanced (Recording pictures) Changing the sensitivity according to the movement of the subject being recorded N] The camera detects the movement ef the subject near the center of the screen and then sets the optimal ISO sensitivity and shutter speed according to the movement and the brightness of the subject.
Advanced (Recording pictures) ................. Taking Close-up • The focus range becomes the same as macro mode. [5 cm (0.16 feet) (Wide)/ 30 cm (0.98 feet) (Tele) to J-] • When the flash is activated, the ISO sensitivity is automatically increased to a maximum of [ISO640].
Advanced (Recording pictures) ,,The available flash range is about 30 cm (0.98 feet) to 5.0 m (16.4 feet) (Wide). (When the ISO sensitivity is set to [AUTO].
• Press [MENU/SET] and then perform steps 1,2 and 3 to change the scene mode. • About the information D • If you press [DISPLAY] when selecting a scene mode in step 2, explanations about each scene mode are displayed. (if you press [DISPLAY] again, the screen returns to the [SCENE MODE] menu.
Advanced CRecording pictures) Press [_] to display the [SCENE MODE] menu and select a scene mode. (P44) Select this to take pictures of yourself. • Technique for Self portrait mode Press the shutter button halfway to focus. The self-timer indicator lights up when you are brought into focus.
• Keep the subject still for about 1 second after taking the picture. • We recommend rotating the zoom lever to Wide (1 ×)and being about 1.5 m (4.92 feet) from the subject when taking a picture. • The focus range is 1.2 m (3.94 feet) to 5 m (16.
Advanced (Recording pictures) Press [ _ ] to display the [SCENE MODE] menu and select a scene mode. (P44) This mode allows you to take pictures with a candle-lit atmosphere. • Technique for Candle light mode • If you make the most of the candle light, you can take successful pictures without using the flash.
Advanced (Recording pictures) Press [_] to display the [SCENE MODE] menu and select a scene mode. (P44) Select this when you want to take pictures of a pet such as a dog or a cat.
Advanced (Recording pictures) 2 Take pictures. • Technique for Fireworks mode • Since the shutter speed becomes slower, we recommend using a tripod. • Press the shutter button fully to display the countdown screen. De not move the camera after this screen is displayed.
Press [_] to display the [SCENE MODE] menu and select a scene mode. (P44) This allows you to take pictures that show the snow as white as possible at a ski resort or a snow-covered mountain. • The white balance cannot be set. Advanced (Recording pictures) • Adjusting the white balance [WB ADJUST.
Advanced {Recording pictures) Motion Picture Mode N] ] Press the shutter button halfway to focus and then press it fully to start recording. • Changing the settings for the aspect ratio and the picture quality 1 Press [MENU/SET].
•You can record smoother motion pictures with "30 fps". •You can record longer motion pictures with "10 fps" although the picture quality is lower.
Advanced (Recording pictures) Recording which Day of the Vacation You Take the Picture If you set the departure date of the vacation in advance, the number of days that have passed since the departure date (which day of the vacation it is) is recorded when you take the picture.
_1/1_: Select the desired item. A/Y: Set the year, month and date. • The travel date is canceled if the current date is after the return date. • If you do not want to set the return date, press [MENU/SET] while the date bar is displayed. 7 Press [MENU/SET] to close the menu.
Advanced (Recording pictures) Displaying the Time at the Travel Destination (World Time) If you set your home area and the travel destination area when traveling abroad etc., the local time at the travel destination area can be displayed on the screen and recorded on the pictures taken.
• Finishing setting the home area • If you are setting the home area for the first time, the screen returns to the screen shown in step 0 of "Setting the home area [HOME]"after you press [MENU/ SET] to set your home area. Press • to return to the screen shown in step 3 and then press [MENU/SET] to close the menu.
Advanced (Recording pictures) Using the [REC] Mode Menu Increase the variey of pictures you can take by setting the white balance, color mode etc. The menu items that can be set differ depending on the recording mode. • Setting from the menu screen Press [MENU/SET] to display the [REC] menu and then select the item to set.
Press [_] to display the [REC] mode menu and select the item to set. (P17) This function allows you toreproduce a white color close to real life in pictures recorded under sunlight, halogen lighting etc. in which the white color may appear reddish or bluish.
Advanced (Recording pictures) • When you take a picture with the flash, the white balance may not be properly adjusted if the flash level is insufficient for the subject. • The white balance setting is memorized even if the camera is turned off. However, the white balance setting for a scene mode returns to [AWB] when the scene mode is changed.
Select to take pictures with the same 3:2 aspect ratio as 35 mm film. This is suitable for landscapes etc. where a wide view is preferable. This is also suitable for playing back pictures on a wide-screen TV, high-definition TV etc. • In motion picture mode [_], you can select [1_1].
Advanced (Recording pictures) • When the aspect ratio is [_]. (5.5M) 3072× 1728 pixels (DMC-FX12) (4.5M) 2816× 1584 pixels (DMC-FX10) [Z_ (2M EZ) 1920x1080 pixels • Quality Fine (Low compression): This gives priority to picture quality. Picture quality will be high.
may also be bigger than usual when taking pictures in underwater mode. • The camera is focusing on all the AF areas when multiple AF areas (max. 5 areas) light at the same time. The focus position is not predetermined. It is set to a position automatically determined by the camera at the time of focusing.
Advanced (Recording pictures) [ON] The AF assist lamp turns on in low light conditions. At this time, the AF assist lamp icon [[]] appears on the screen. The effective range of the AF assist lamp is 1.5 m (4.92 feet). [OFF] The AF assist lamp does not turn on.
Advanced (Playback) Displaying Multiple Screens (Multi Playback) N] 1 Rotate the zoom lever towards [_] [W] to display multiple screens. (Screen when 9 screens are displayed) • Depending on the recorded picture and the setting, the following icons will appear.
Advanced (Playback) Displaying Pictures by Recording Date (Calendar Playback) N] You can display pictures by recording date using the calendar playback function.
Using the Playback Zoom [] | Rotate the zoom lever towards [ O. ] [T] to enlarge the picture. ;,; Q. • C_: 1X_2X_4X_8X_16X • When you rotate the zoom lever towards [_] [W] after enlarging the picture, the magnification becomes lower. When you rotate the zoom lever towards [C_] [T], the magnification becomes higher.
Advanced {Playback) Playing Back Motion Pictures N] Press _1/1_ to select a picture with a motion picture icon [_ ]/ [_ Y[_ ]/[_':_ Y[_ ]/ [_ ] and then press • to play back. Y ('A): The motion picture recording time • After playback starts, the elapsed playback time is displayed on the bottom right of the screen.
Using the [PLAY] mode menu [] You can use various functions in playback mode to rotate pictures, set protection for them etc. 1 Press [MENU/SET]. 2 Press &IV to select the menu item and then press I_.
Advanced (Playback) Press [ _ ] to display the [PLAY] mode menu and select the item to set. (P69) This is recommended when playing back pictures on a TV screen. You can skip unwanted pictures if [FAVORITE] (P70) has been set. • When [FAVORITE] is set to [ON] step 1.
] Press • to select [ON] and then press [MENU/SET]. © V MENU • You cannot set pictures as favorites if [FAVORITE] is set to [OFF]. Also the favorites icon [-_] will not appear when [FAVORITE] is set to [OFF] even if it was previously set to [ON].
Advanced {Playl)ack) • Rotate (The picture is rotated manually.) 1 Press _1/1_ to select the picture and then press V. V • The [ROTATE] function is disabled when [ROTATE DISR] is set to [OFF]. • Motion pictures and protected pictures cannot be rotated.
• Single setting | Press 41/1_ to select the picture and then press V. V 2 Press AIVI<II_ to select [SHOOTING DATE], [AGE] or [TRAVEL DATE] and then press [MENU/SET] to set each item. TRAVEL DATE I OF F _jY MENU SHOOTING DATE] [W/O TIME] Stamp the year, month and date.
Advanced (Playback) • Multi setting 1 Press _1/1_ to select the picture and then press • to SET/ CANCEL. © V [SET] The [DATE STAMP] icon _'_,_ appears. [CANCEL] The [DATE STAMP] icon _'_,) disappears. • Repeat this step. 2 Press [MENU/SET].
• Single setting 1 Press 4/1_ to select the picture to print and then press •/_' to set the number of prints. Advanced (Playback) • To cancel all settings 1 Press • to select [YES] and then A press [MENU/SET]. A © MENU v • The number of prints icon [I_J] _'_,} appears.
Advanced (Playback) ................. • Single setting • DPOF is an abbreviation of "Digital Print Order Format". This feature allows you to write print information to media and then use the information on a DPOF-compliant system.
Advanced (Playback) Press [_] to display the [PLAY] mode menu and select the item to set. (P69) This function is useful if you want to reduce the file size of a picture to attach it to an e-mail or upload it to a website. | Press 41/1_ to select the picture and then press _'.
Advanced (Playback) Press [_] to display the [PLAY] mode menu and select the item to set. (P69) You can enlarge and then clip the important part of the recorded picture. | Press _1/1_ to select the picture and then press ,. Y • The following pictures cannot be trimmed.
Press [_] to display the [PLAY] mode menu and select the item to set. (P69) You can copy recorded picture data from the built-in memory to a card or vice versa. | Press •/_' to select the copy destination and then press [MENU/SET]. A MENU @ ._-_r:l: All the picture data in the built-in memory are copied onto the card at one time.
Advanced (Playback) Press [_] to display the [PLAY] mode menu and select the item to set. (P69) Usually, it is not necessary to format the built-in memory and the card. Format them when the message [BUILT-IN MEMORY ERROR] or [MEMORY CARD ERROR] appears.
Connecting to a PC You can acquire recorded pictures to a PC by connecting the camera and the PC. The software [LUMIX Simple Viewer] or [PHOTOfunSTU Die-viewer-] (for Windows ®) in the CD-ROM (supplied) allows you to easily acquire pictures recorded with the camera to a PC, print them and send them by e-mail.
Connecting to other equipment • The drive is displayed as [NO NAME] or [Untitled] when you connect the camera with a card inserted. • About motion picture playback on a PC Use the software "QuickTime" (for Windows 2000/XP) in the CD-ROM (supplied) to play back motion pictures recorded on this camera on a PC.
• It may not be possible to playback the motion pictures on the builtqn memory or a card normally when this unit and the PC are connected. Import the motion picture files to the PC and then play them back. • If battery power is exhausted while the camera and the PC are communicating, the recorded data may be damaged.
Connecting to other equipment • It may take time to print some pictures. Use a battery with sufficient battery power (P21) or the AC adaptor (DMW-AC5PP; optional) when you connect to a printer. • Turn the camera off before inserting or removing the cable for the AC adaptor (DMW-ACSPP; optional).
• Selecting multiple pictures and printing them 1 Press •. 2 Press &IV to select an item and then press [MENU/SET]. A MENU @ [MULTI SELECT] Multiple pictures are printed at one time. • After selecting [MULTI SELECT], press 41/1_ to select the pictures to print and then press Y.
Connecting to other equipment • [NUM. OF PRINTS] Set the number of prints. *You can set up to 999 prints. • [PAPER SIZE] (Paper sizes that can be set with this unit) The paper sizes are displayed on pages 1/2 and 2/2. Press • to select. 1/2 Settings on the printer are 3rioritized.
appears ifyou change the mode dial to a mode other than [1_]while the camera and the printer are connected. Set the mode dial to[ll_] again and then disconnect the USB connection cable. If this happens during printing, stop printing and then disconnect the USB connection cable.
O_e_ Screen Display 1 2 4 5 6 7 12 11 (_) In recording Recording in normal picture mode [ O ] (Initial setting) 1 Recording mode 2 Flash mode (P35) 3 AF area (P22) 4 Focus (P22) 5 Picture size (P61) 6.
2 3 4 Others 1 2 3 4 5 6 7 12 11 10 (_) Recording in simple mode 1 Flash mode (P35) 2 Focus (P22) 3 Picture mode (P24) _: Jitter alert (P24) 4 Battery indication (P21) 5 Number of recordable pictures .
Others 15 Travel destination setting (P56) 16 Age (P48) 17 Power LCD (P34) 18 Number of days that have passed since the travel date (P54) 19 Motion picture playback (P68) 20 Stamped with date stamp in.
• About the LCD monitor • Do not press the LCD monitor with excessive force. Uneven colors may appear on the LCD monitor and it may malfunction. • If the camera is cold when you turn it on, the picture on the LCD monitor will be slightly darker than usual at first.
Others • Charger • If you use the battery charger near a radio, the radio reception may be disturbed. Keep the charger 1 m (3.28 feet) or more away from radios. • The charger may generate whirring sounds when it is being used. This is not a malfunction.
[NOT ENOUGH SPACE ON BUILT-IN MEMORY]/[NOT ENOUGH MEMORY IN THE CARD] There is no space left on the built-in memory or the card. • When you copy pictures from the built-in memory to the card (batch copy), the pictures are copied until the capacity of the card becomes full.
Others [PICTURE IS DISPLAYED FOR 4:3 TV]/ [PICTURE IS DISPLAYED FOR 16:9 TV] • The AV cable is connected to the camera. Press [MENU/SET] if you want to delete this message at once. • Select [TV ASPECT] in the [SETUP] menu if you want to change the TV aspect.
4:2 or 3 pictures are taken at one time. • Is [BURST] in the [REC] mode menu set to [ON]? (P63) 5: The subject is not focused properly. • The focus range varies depending on the recording mode. Rotate the mode dial to set the proper mode for the distance to the subject.
Others 3: The LCD monitor flickers indoors. • The LCD monitor may flicker for a few seconds after turning the camera on indoors under fluorescent light. This is not a malfunction. 4: The LCD monitor is too bright or dark. • Adjust the brightness of the screen.
the PC and then write them back to the card, the pictures may be displayed with dates different from the actual recording dates in calendar playback etc. • TV, PC and printer 1: The picture does not appear on the television. • Is the camera connected to the TV correctly? • Set the TV input to external input mode.
Others 4: The AF assist lamp does not turn on. • Is [AF ASSIST LAMP] on the [REC] mode menu set to [ON]? (P63) • Are you taking pictures in dark places? -The AF assist lamp does not turn on in bright places.
Others Number of Recordable Pictures and Available Recording Time • The number of recordable pictures and the available recording time are an approximation. (These vary depending on the recording conditions and the type of card.) • The number of recordable pictures and the available recording time varies depending on the subjects.
O_e_ iiiiiiiii_iiiiii_iii1iiiIiiii_!_[iiiiiii[i_i_iii1_i_iiii[ii_iiiiii_i_;i;ii!iiii_i_iiii_iiii_ iHiiiiiiii!iiiiiiii//!!Hiiii!iii!li_iiii,liiiiiii/i[iiiiii (Approx.
iiiii}ili}iiiHiiiii _,i_lii _iJ,i_iYiiii,_,i _i_i_:i_iiD_ii))i_i!_iiii!_!!_iii;i_iiiii[_!iiiii_i_i_!Liiii_ii[_ ¸iii; _ili_ilii_iJ,i_iiiii:i ¸}_iiii_i_ii_i_iiii_ii_iiiiiii_ii_i_ii[i,ii_liiii Others i.
Others Specifications Digital Camera: Information for your safety Camera effective pixels: Image sensor: Lens: Digital zoom: Extended optical zoom: Focus: Focus range: Shutter system: Motion picture r.
Others Flash: Microphone: Speaker: Recording media: Picture size Still picture: Motion pictures: Quality: Recording file format Still Picture: Motion pictures: Interface Digital: Analog video/audio: Terminal [DIGITAL/AV OUT]: [DC IN]: Flash range: [ISO AUTO] Approx.
Others Dimensions: Mass: Approx. 94.1 mm (W)x51.4 mm (H)x24.2 mm (O) [3 11/16" (W)×2" (H)× 15/16" (D)] (excluding the projecting part) Approx.
Others Digital Camera Accessory System CGA-S005A Battery Pack DMW-CX12 y Soft Case DMW-CHFX30 _ _ Semi Hard Case DMW-MCFX07 Marine Case DMW-AC5PP _1 _j AC Adaptor RP-SDR04GU1K RP-SDK02GU1A RP-SDR02GU1.
Others Digital Camera Accessory Order Form (For USA Customers) Please photocopy this form when placing an order. 1. Digital Camera Model # 2. Items Ordered Accessory # Description Price Each Quantity Total Price Subtotal Your State & Local Sales Tax Shipping & Handling 6.
Others Request for Service Notice (For USA Only) Please photocopy this form when making a request for service notice. In the unlikely event this product needs service. Request for Service Notice: • P,ease include your proof of purchase. (Failure to do so will delay your repair.
Others Limited Warranty (For USA Only) PANASONIC CONSUMER ELECTRONICS COMPANY, DIVISION OF PANASONIC CORPORATION OF NORTH AMERICA One Panasonic Way, Secaucus, New Jersey 07094 PANASONIC PUERTO RICO, INC.
Carry-In or Mail-In Service For Carry-In or Mail-In Service in the United States call 1-800-272-7033. For assistance in Puerto Rico call Panasonic Puerto Rico, Inc. (787)-750-4300 or fax (787)-768-2910. Others This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage.
Others Customer Services Directory (For USA Only) I Accessory Purchases I Purchase Parts, Accessories and instruction Books online for all Panasonic Products by visiting our Web Site at: htt ://www. asc. anasonic.com or, send your request by E-mail to: n.
Precautions a prendre (pour le Canada) AVERTISSEMENT : POUR RI_DUIRE LES RISQUES D'INCENDIE, DE CHOC I_LECTRIQUE OU DE DOMMAGES .& L'APPAREIL, • N'EXPOSEZ PAS CET APPAREIL A LA PLUIE, h.
Others I_vitez d'approcher I'appareil photo de tout _quipement magnetise (four micro-ondes, t_l_viseur, _quipement de jeux video, etc.). • Si vous utilisez I'appareil photo & proximit_ d'un t_leviseur, les radiations electromagnetiques pourraient nuire au son et & I'image.
Index A AC Adaptor .............................. 81,83, 105 Access indication ................................... 21 Aerial Photo Mode ................................. 51 AF Assist Lamp ...................................... 63 AF Lock .............
O_e_ 0 Operational Sound .................................... Optical Image Stabilizer ......................... 41 Optical Zoom ............................................ PAL ........................................................ 20 Paper Size ..
QuickTime QuickTime and the QuickTime logo are trademarks or registered trademarks of Apple Computer, Inc., used under license therefrom. Panasonic Consumer Electronics Company, Division of Panasonic Corporation of North America One Panasonic Way, Secaucus, NJ 07094 Panasonic Puerto Rico, Inc.
Een belangrijk punt na aankoop van elk apparaat Panasonic DMC-FX12 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Panasonic DMC-FX12 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Panasonic DMC-FX12 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Panasonic DMC-FX12 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Panasonic DMC-FX12 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Panasonic DMC-FX12 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Panasonic DMC-FX12 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Panasonic DMC-FX12 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
