Gebruiksaanwijzing /service van het product KX-TD1232 van de fabrikant Panasonic
Ga naar pagina of 160
KX-TD816 Model KX-TD1232 Digital Super Hybrid System Installation Manual D1232 DIGITAL SUPER HYBRID SYSTEM Panasonic Panasonic D816 DIGITAL SUPER HYBRID SYSTEM Please read this manual bef ore connecting the Digital Super Hybrid System.
2 Installation Man ual Thank you for purchasing this Panasonic Model KX-TD816 / KX-TD1232, Digital Super Hybrid System..
System Compon ents Installation Manual 3 System Component s System Componen ts T able Model Descri ption Service Uni t KX-TD816 KX-TD1232 Digital Super Hybri d System (Mai n Unit) Digital Super Hybri .
System Comp onents 4 Installation Man ual Optional Equipment KX-T7440 KX-T7441 KX-T7240 KX-T7040 Digital DSS Console Digital DSS Console Digital DSS Console DSS Console KX-TD1 12 KX-TD160 KX-TD161 KX-.
Important Safety Instructions Installation Manual 5 Import ant Safety Instructions When using you r telephone equi pment, basic safety precaut ions should always be followed t o reduce th e risk of fire, elect ric shock an d injury t o persons, includin g the followi ng: a) Read and u nderstand all instru ctions.
Important Safety Instru ctions 6 Installation Man ual 4) If the pr oduct does not operate normally by following the operati ng instru ctions. Adjust onl y those con trols, that are covered b y the ope.
Attention Installation Manual 7 Attention • Keep the unit away from hea ting applian ces and elect rical noise generati ng devices such as fluoresc ent lamps, motor s and televi sions. Thes e noise sourc es can inter fere with th e performanc e of the Digit al Super Hybri d System.
Attention 8 Installation Man ual Accesso ry Order In formatio n • Replac ement part s and accessor ies are ava ilable thr ough your local authori zed parts distri butor .
Introduc tion Installation Manual 9 Introduction This Inst allation Manu al provid es technical informat ion for the Pa nasonic Di gital Super Hybrid Syst em, KX-TD816 / KX-TD1232.
Introductio n 10 Installation Manual Along with th is Instal lation Manual, th e following manuals are avail able to help you know the availab le feature s, program and us e the KX-TD816 / KX-TD12 32 system. Featur es Guide Provides informati on about the s ystem feat ures.
F . C.C REQUIREMENTS AND RELEV ANT INFORMA TION Installation Manual 1 1 F .C.C REQUIREMENTS AND RELEV ANT INFORMA TION 1. Notificat ion to the T elephone Compa ny This equipme nt complies wit h Part 68 o f the FCC rules and the requi rements ad opted by the ACT A.
F .C.C REQUIREMENTS AND RELEV ANT INFORMA TION 12 Installation Manual 5. T rouble with Thi s Equipment If troubl e is experienc ed with this equi pment, for rep air or warrant y information, pl ease see the atta ched warran ty , which inc ludes the Serv icenter Di rectory .
F . C.C REQUIREMENTS AND RELEV ANT INFORMA TION Installation Manual 13 CAUTION Any changes or modif ications not exp r essly appr oved by the party r esponsibl e for complianc e could voi d the user' s authority to operat e this devic e. When pr ogramming emer gency numbers an d / or making test calls to emer gency numbers: 1.
T able of Con tents 14 Installation Manual T able of Content s 1 System Outline 1.1 System Highlights ........................... ........................... ........................... ....................... 18 1.1.1 System Highlight s .............
T abl e of Cont ents Installation Manual 15 2.4.1 1 System Connect ion ........................ ........................... ........................... .................... 1 18 2.5 Auxiliary Co nnection for Power Fai lure T ransfer ............ .....
T able of Con tents 16 Installation Manual.
System Outlin e Installation Manual 17 Section 1 System Outline This sec tion pr ovides general information on the system, i ncluding system capaci ty and spec ifications .
System Outlin e 18 Installation Manual 1.1 System Hi ghlight s 1.1.1 System Hi ghlights System Maximum Capacity Modul e Expan sion Expansion modules are used to incr ease the syst em capacity .
System Outlin e Installation Manual 19 System Connect ion *1 W ith the addition of t he optional System Inter Co nnection Card, two Digital Sup er Hybrid Systems can be con nected toge ther to expand the sy stem to a maximum of 24 outs ide lines and 64 extensio ns.
System Outlin e 20 Installation Manual Caller ID Allows the user to see the name or telep hone number of a cal ler on the tel ephone displa y before answerin g a call. T runk (Outsi de Line) Answ er From Any S tation (T AF AS) Ringing oc curs over the external pa ging syst em; the call c an be answered from any stati on.
System Outlin e Installation Manual 21 1.2 Basic System C onstruction 1.2.1 Basic Syste m Constructio n The KX-TD816 Digi tal Super Hybrid System ha s a basic capa city of four outside li nes and eight ext ensions, and t he KX-TD1232 has eight outsi de lines and 16 extensions .
System Outlin e 22 Installation Manual 1.2.2 System Connectio n Diagram KX-TD816 Panasonic D816 DIGITAL SUPER HYBRID SYSTEM Avoid using the same AC outlet for office equipment and the KX-TD816.
System Outlin e Installation Manual 23 Note • It is re commended that ex tension of jack 1 is a d isplay propr ietary tel ephone. • Parallel connecti on of telephon es is possi ble. Refer to the Parallel T elephone Connection in 2.3.3 T elephon e Connectio n.
System Outlin e 24 Installation Manual KX-TD1232 D1232 DIGITAL SUPER HYBRID SYSTEM Panasonic Printer for SMDR or Personal Computer for System Programming AC Surge Protector 120 VAC, 60 Hz Avoid using the same AC outlet for office equipment and the KX-TD1232.
System Outlin e Installation Manual 25 Note • It is re commended that ex tension of jack 1 is a d isplay propr ietary tel ephone. • Parallel connecti on of telephon es is possi ble. Refer to the Parallel T elephone Connection in 2.3.3 T elephon e Connectio n.
System Outlin e 26 Installation Manual 1.3 Pr oprietary T elephones 1.3.1 Proprietary T elephones The foll owing Panason ic propri etary tele phones are available wi th this sys tem.
System Outlin e Installation Manual 27 1.4 Options 1.4. 1 Options Model No. Model Name Descripti on Max. Quan tity on KX- TD816 Max. Quantity on KX-TD1232 Single System System Connection KX-TD170 8-S tation Line Unit Adds 8 ext ension li nes.
System Outlin e 28 Installation Manual KX-TD194 SL T Message W ait ing Lamp Ada ptor Un it Supports t he Message W aiting feat ure for a single l ine telephon e with a message wai ting lamp. One unit supoor ts 16 extensi ons. 12 4 KX-TD196 Remote Card Supp orts the programmi ng and maintenanc e of the syst em fro m a re mote locatio n.
System Outlin e Installation Manual 29 1.4.2 Expansion Unit Co mbination KX-TD816 KX-TD1232 Master System Basic (no unit connected) + KX-TD17x + KX-TD180 / KX-TD185 + KX-TD284 + KX-TD38x KX-TD38x KX-T.
System Outlin e 30 Installation Manual KX-TD1232 Slave System (KX-TD187 or KX-TD290 is not connected to the master syst em) KX-TD1232 Slave System (KX-TD187 or KX-TD290 is connected to the master system) Note • : Combinat ion possib le; : Combinat ion not possi ble; Shaded par t: These combin ations ap pear elsewher e in the tabl e.
System Outlin e Installation Manual 31 1.5 Specifications 1.5.1 General Description Con tr ol M eth od CPU: 16-bit CPU Switching Non Blocking PCM T ime Switch Power Supplies Primary 120 V AC, 60 Hz Se.
System Outlin e 32 Installation Manual St a t i o n Message Detai l Recording (SMDR) Inter fac e Serial Interf ace (RS-232C) ( D-SUB, 25-pin) Output Equipment Prin ter Deta il Recording Date, T ime, E.
System Outlin e Installation Manual 33 1.5.2 Charac teristics S tation Loop Limit Proprie tary T elephone: 40 Single Li ne T elephone : 600 incl uding set Doorphone: 20 Minimum Leakage Resi stance 15 .
System Outlin e 34 Installation Manual 1.5.3 System Capacity Lines , S tatio n Equi pment Actual ca pacity will depend on the n umber or / a nd type of unit s connect ed to the syst em.
General Insta llation Installation Manual 35 Section 2 General Inst allation.
General Installation 36 Installation Manual 2.1 Befor e Install ation 2.1.1 Before Inst allation Please r ead the f ollowing notes concerni ng installa tion and conne ction bef ore inst alling the system and terminal equipment.
General Insta llation Installation Manual 37 Wiring Pr e cautions Be sure to follow the se instruct ions when wiri ng the unit : a) T o assure good qu ality tele phone connec tion, it is rec ommended .
General Installation 38 Installation Manual 2.2 Installation of the Main Unit 2.2.1 Unpa cking Unpack the box and check t he items below: KX-TD816 KX-TD1232 Main Unit one one AC Cord one one T emplate.
General Insta llation Installation Manual 39 2.2.2 Location o f Interf aces Overview KX-TD816 KX-TD1232 D816 DIGITAL SUPER HYBRID SYSTEM Panasonic External Music Jack Paging Jack System Clear Switch R.
General Installation 40 Installation Manual Inside V iew KX-TD816 KX-TD1232 Extension Modular Jacks Outside Line Modular Jacks Fuse Front Cover REMOTE SYSTEM INTER CONNECTION DISA DOORPHONE Outside Li.
General Insta llation Installation Manual 41 2.2.3 W all Mo unting This set i s designed f or wall mountin g only . The wal l where the mai n unit is to be mounted must be able to support the weigh t of the main unit . If screws other th an the ones suppl ied are used , use screw s wit h the s ame d iamet er as the on es en close d.
General Installation 42 Installation Manual Mounting on Concre te or Mortar W all 1. Place th e template (included) on the wall to mark the screw posi tions. 2. Drill ho les and drive the anchor plugs (user -supplied) with a hammer , flush to the wal l.
General Insta llation Installation Manual 43 2.2.4 Opening Front Cover 1. Loosen the t wo screws on the right si de of the main unit. 2. Open the fr ont cover in t he directi on of arrow . Note The two scre ws are attac hed to the front cover with spri ngs so that t hey will not be lost.
General Installation 44 Installation Manual 2.2.5 Frame Gr ound Connection IMPOR T A NT Connect the frame of the mai n unit to ground. 1. Loosen the screw . 2. Insert the grounding wire. 3. T ighten t he screw . 4. Connect th e groundin g wire to groun d.
General Insta llation Installation Manual 45 2.3 Connection 2.3.1 Outside Line Connection Connection 1. Insert the modular plugs of the tel ephone line cords (4-conducto r wiring) into the modular jacks on t he system. 2. Connect the line cor d to the termi nal board or the Centra l Offic e jack.
General Installation 46 Installation Manual KX-TD1232 Notice • Use twisted pair cable fo r installa tion. • It i s recommended to use RJ14C tel ephone jac ks. • Mis -connection may cause the system to o perate improp erly . See 5 .1.1 Install ation and 5.
General Insta llation Installation Manual 47 2.3.2 Extensi on Connection KX-TD816 Extension jacks 1 th rough 8 are for all ki nds of teleph ones. Maximum Cabling Distance The maxi mum le ngth of the e.
General Installation 48 Installation Manual Connection KX-TD1232 Extensio n jacks 1 t hrough 16 are f or all kind s of tele phones. Maximum Cabling Distance The maximum le ngth of th e extension l ine.
General Insta llation Installation Manual 49 * 3-pa ir twi sted ca blin g: T elephone W iring Single li ne telepho nes T elephone wiring 1 pair wire (T , R) Digi tal pro prieta ry tele phon e (e.
General Installation 50 Installation Manual Connection 1. Insert the 50-pin con nector t o the Extensio n Jack as s hown. 2. Connect the wire cords to the appropri ate conne ctor pins and t he terminal equ ipment. Refer to the T elephon e W iring (Pag e 48) and Pi n Number Chart (Pag e 51).
General Insta llation Installation Manual 51 Pin Number Ch art Pin no. Cable Color EX TN. 1-8 / Doorphone EXTN. 9-16 8EXTN.* 8EXTN.* 26 1 27 2 28 3 WHT -BLU BLU-WHT WHT -ORN ORN-WHT WHT -GRN GRN-WHT Jack No.1 T R D1 D2 P1 P2 Jack No. 9 T R D1 D2 P1 P2 Jack No.
General Installation 52 Installation Manual Note *"8EXTN" in the table i ndicates an e xtension expa nsion area f or 8-Sta tion Line Unit (KX-TD170) or 8-Stat ion Line Unit with SL T CID (KX-TD171). Syst em Prog ram ming is requi red fo r card locat ion id entif icatio n.
General Insta llation Installation Manual 53 Programming G uide Ref ere nce [007] DS S Console Port and Pa ired T elephone Assignment [109] Expan sion Unit T ype Featur es Guide Refer ence DSS Console.
General Installation 54 Installation Manual 2.3.3 T elephone Connection Pr oprietary T elephone / DSS Console Connection Connect pr oprietary t elephones and DSS Consoles a s follows: Analog Pr oprietary T elephone ncluded telephone ine cord Connect to a Digital Super Hybrid System ( TO EMSS ).
General Insta llation Installation Manual 55 KX-T7200 Ser ies Digital Pr oprietary T elephone KX-T7400 Ser ies Digital Pr oprietary T elephone Included telephone line cord Connect to a Digital Super Hybrid System ( TO EMSS ). Connect to a single line telephone jack, Telephone Answering Machine, or FAX for XDP or parallel connections ( TO TEL ).
General Installation 56 Installation Manual KX-T7400 DSS Consol e / KX-T7240 Digit al DSS Console KX-T7440 / KX-T744 1 Digital DSS Conso le KX-T7440 and KX- T7441 can be c onnected to a KX-T7400 series digital propri etary telepho ne. Use the at tached pl ates and scr ews as follows .
General Insta llation Installation Manual 57 Paralleled T elephone Connec tion Any single l ine telephone c an be connected i n parallel wit h a proprieta ry telepho ne as follows: Method 1: Using a M.
General Installation 58 Installation Manual Method 2: For Digital Proprietary T elephones only Note • The KX-TD123 2 is illust rated as th e main unit. • Not onl y a single line telep hone but a sin gle line device such as an answering mac hine, a facsimil e or a modem (per sonal computer ) etc.
General Insta llation Installation Manual 59 2.3.4 EXtra Device Port (XDP) Connection A digital proprietar y telephone and a single line telephone can be connect ed to the same extensio n jack yet have dif ferent ext ension numbers ( eXtra Device Port featur e).
General Installation 60 Installation Manual 2.3.5 P olarity Sensitive T elephone Connection If your telephone is polarit y sensitive , follow the pr ocedure below: 1. Complet e all the re quired exten sion wiri ng. 2. Confirm th at dialing c an be done f rom all the ex tensions usi ng a touch-to ne teleph one.
General Insta llation Installation Manual 61 7. Reverse as shown. 8. Every time a n extension t elephone is r eplaced, rep eat the above procedure . Note The KX-TD1232 is illust rated as the main unit.
General Installation 62 Installation Manual 2.3.6 External Pager (Paging Equipment) Connection KX-TD816 One exter nal pager (us er-su pplied) c an be connecte d to the KX-TD8 16 as illust rated below .
General Insta llation Installation Manual 63 KX-TD1232 Up to two externa l pagers (user -suppl ied) can be conn ected to the KX-TD1232 pe r system as illust rated below .
General Installation 64 Installation Manual 2.3.7 External Music Sour ce Connection KX-TD816 One m usic sour ce suc h as a radi o (use r-supp lied) can be con nect ed to t he KX -TD 816 as illust rated be low . Insert the plug to t he earphone / headphone j ack on the ext ernal musi c source.
General Insta llation Installation Manual 65 KX-TD1232 Up to two mu sic sourc es such as a ra dio (user -supplied) can be connecte d to the KX-T D1232 per s ystem as ill ustra ted be low . Insert t he plug to the earphone / headphone jack on th e external mus ic source.
General Installation 66 Installation Manual 2.3.8 Printe r and PC Connection A user -supplied printer or personal computer (PC) ca n be connec ted to the sy stem. These are used to prin t out or refe r to th e Station Me ssag e Deta il Re cording (SMD R) cal l reco rds and system pr ogramming data.
General Insta llation Installation Manual 67 The pin conf iguration o f Serial Int erface (RS- 232C) Connector i s as follows : Connection Chart for Printer / IBM *1 Per sonal Computer If you conn ect a prin ter or a PC wit h a 25-pin cab le, foll ow the chart be low .
General Installation 68 Installation Manual If you co nnect a print er or an IBM-PC wi th a 9-pin cab le, follow th e chart be low . Note Please r ead your prin ter manual and connect t he first EIA p in (FG) of thi s unit to the printer cable.
General Insta llation Installation Manual 69 Data Carrier Detect: CD (DCD) : (input) The ON conditi on is an indi cation t o data termin al (DTE) th at the carri er signal i s being received .
General Installation 70 Installation Manual 2.3.9 Installation of L ightning Pr otectors Overv iew A lightnin g protector is a device to be inst alled on an outs ide line to preven t a dangerous sur ge from ente ring the bui lding and damagi ng equipment.
General Insta llation Installation Manual 71 Outside Install ation Diagram If you ins tall an ext ension outsi de of the main b uilding, t he following precautions are recommended: a) Insta ll the exten sion wire undergro und. b) Use a cond uit to prot ect the wi re.
General Installation 72 Installation Manual Earth Rod Ins tallation Diagram 1. Instal lation loca tion of t he earth rod: Near the prot ector 2. Check obst ructions: Non e 3. Compositio n of the ea rth rod: Meta l 4. Depth of t he earth rod: More than 50 cm ( 20 inches) 5.
General Insta llation Installation Manual 73 2.4 Installa tion of O ptional Cards and Unit 2.4.1 Location o f Option al Cards a nd Units The locati on of the optional car ds and units is shown bel ow .
General Installation 74 Installation Manual KX-TD1232 The foll owing expans ion units can be insta lled to any of the three e xpansion ar eas. Note System Prog ramming is requi red for expa nsion unit l ocation. Refer to [109] Expa nsion Unit T ype. Default: Area 1 = 4- CO Line Unit, Area 2 and 3 = 8-S tation Line Unit .
General Insta llation Installation Manual 75 Doorphone Card for KX-TD816 Remote Card, System Inter Connect ion Card, DISA Card, Doorphone Card for KX- TD1232 Install Doorphone Card, KX-TD160/KX-TD161 . KX-TD160 connects two doorphones and two door openers.
General Installation 76 Installation Manual Caller ID Cards, PLL Card Up to two Call er ID C ards (KX-TD193) for KX-TD816, and up to t hree Caller ID Cards f or KX-TD1232 can be ins talled to the init ially provi ded Outside Line Card and 4- CO Line Unit.
General Insta llation Installation Manual 77 SL T Message W aiting Lamp Adaptor Unit One SL T Message W aiting La mp Adaptor Unit ( KX-TD194) for KX-T D816, and up to t wo SL T Message W aiting Lamp Adaptor Units for KX-TD1232 can be installe d.
General Installation 78 Installation Manual 2.4.2 4-CO Line Unit Connection T o add fo ur outside lin es (outsid e lines 5 through 8 f or KX-TD816, and outside lines 9 throu gh 12 for KX-TD1232 ), use the option al 4-CO Line Unit (KX- TD180). This unit ca n be installe d to any of the expans ion unit are as provided on the front of the main un it.
General Insta llation Installation Manual 79 2.4.3 8-S tation Line Uni t Connect ion T o add eig ht extensions (jack nu mbers 9 through 1 6 for KX-TD816, and jack numbers 17 through 24 or 25 throu gh 32 for KX-TD1 232), use the o ptional 8-S tation Li ne Unit (KX- TD170).
General Installation 80 Installation Manual 2.4.4 8-S tation Line Unit with SL T CID Connection The optio nal 8-St ation Lin e Unit with SL T CID (KX- TD171) adds eigh t extensions (jack numbers 9 thr.
General Insta llation Installation Manual 81 2.4.5 4-DID Line Unit Connect ion T o add four DID lines, use the optional 4-DID Line Unit (KX-TD185). This un it can be install ed in any of the expans ion areas provi ded on the front of the main unit. For insta llation, see 2.
General Installation 82 Installation Manual 2.4.6 Installing Expan sion Unit The foll owing proce dures can be us ed to instal l the option al expansi on units. The followi ng steps 1 through 5 and 7 through 10 ar e the same for all ex pansion uni ts.
General Insta llation Installation Manual 83 3. Hook the cabi net on th e main unit and slide the ca binet to the left unt il it is s ecured. 4. Loosen the o utside sc rew and sli de the cov er to the ri ght. 5. Secure the inside s crew (include d) to fi x the cabinet to the mai n unit.
General Installation 84 Installation Manual 6. (If a o ption is to b e inst alled ) If a KX-TD180 / KX-TD185 is to be insta lled; (for KX-TD1232) Insert t he modular plugs of the t elephone li ne cords ( 4-conductor wi ring) into the modular ja cks on the uni t.
General Insta llation Installation Manual 85 If a KX-TD170 / KX-TD171 is to be i nstalled; (fo r KX-TD1232) Insert the connect or into the j ack. Note • * For detai ls, refer t o 2.5.1 Auxili ary Connection for Power Fa ilure T rans fer. • For cable p in numbers to be connected, se e "Pin Number Char t" in 2.
General Installation 86 Installation Manual 7. T ie all of t he cords into a bu ndle. If other cor ds are exposed in th e upper cabine ts, tie them also. 8. Close the cabinet c over and secur e the out side screw . 9. Cover the cords with the cord hold er (included ).
General Insta llation Installation Manual 87 Note • If you att ach the Call er ID Card (KX-TD193 ) to the 4-CO Line Uni t (KX-TD180) , attach it be fore in stall ing th e 4-C O Line Unit t o the m ain un it. Fo r inst allati on, Re fer to 2.4 .8 Ca ller ID Card I nstal lati on.
General Installation 88 Installation Manual Amphenol 57JE T ype (screw-attach-type 50-pin connector ) Connection for KX-TD170 / KX-TD171 T o fix the Amphenol 57JE type (s crew-attac h type 50 -pin connec tor) to the 8-S tation Line Uni t or the 8- Stati on Line Unit wit h SL T CID, follow the procedure bel ow .
General Insta llation Installation Manual 89 2. T o attac h the Amphenol 57J E type (Plug) t o the connect or , drive the accessory screw into the upper p art. Fasten the accessory wi re tie ar ound the lower hook-pin and t he Amphenol 57JE t ype, as shown.
General Installation 90 Installation Manual 2.4.7 DISA Card and Remote Card / Unit Installation The DISA Card ( KX-TD191), Remote Car d (KX-TD196), High Sp eed Remote Card (KX- TD197) and Re mote Unit (KX- TD198) can be ins talled as fol lows.
General Insta llation Installation Manual 91 KX-TD816 Installing the Remote Unit (KX-TD198) 1. Loose the t wo screws on the cover p late. Inser t your finge rs into the s lits to remove the cover p late. Note There are two cover plat es. Any of them ca n be removed, as needed.
General Installation 92 Installation Manual Attaching another line expansion unit to the Remote Unit (KX-TD198) and install them to the system. 1. Remove the f ront cover of the Remote Unit . Set the MODE switch to 2 only . 2. Attach t he expansion un it to the Remot e Unit as shown b elow .
General Insta llation Installation Manual 93 4. Hook the cabine ts onto the ma in unit and slide the cabinets to t he left unti l they are secur ed. 5. Loosen the o utside sc rew of the expansion uni t and slide t he cover t o the right. 6. Secure the inside s crew (inside with the Re mote Unit) t o fix the ca binet to t he main uni t.
General Installation 94 Installation Manual KX-TD1232 Installing the DIS A Card (KX-TD191) 1. Insert the upper s ide of the DI SA Card into the two hooks on the main unit. 2. Pres s dow n the t wo corn ers o f the lo wer s ide of the D ISA Ca rd. 3. Connect th e cord to t he DISA Card Connec tor .
General Insta llation Installation Manual 95 Installing the Remote Card (KX-TD196) or High Speed Remote Card (KX-TD197) 1. Inse rt the uppe r side o f the R emote Card into t he two h ooks on the main u nit. 2. Press down t he two corne rs of the lo wer side of th e Remote Card.
General Installation 96 Installation Manual 2.4.8 Caller ID Card Instal lation A maximum of two Ca ller ID Cards (KX-TD193) can be installed to t he KX-TD816, and a max imum o f thre e Call er ID C ards can b e insta lled t o th e KX-T D123 2.
General Insta llation Installation Manual 97 Installing to the Initial Ou tside Line Card for KX- TD1232 1. Loo sen th e eigh t scre ws to open the in side c over o f the m ain u nit. Note If any car ds, units, or cords are installed to the mai n unit, remov e them beforeh and.
General Installation 98 Installation Manual Installing to th e Optional 4-CO Line Unit The foll owing procedure must be done before instal ling the 4-CO Li ne Unit (KX-TD180) to the m ain un it. 1. Loo sen th e five screw s loca ted at the re ar o f the 4- CO Lin e Un it.
General Insta llation Installation Manual 99 2.4.9 Doorphone and Door Opener Connection T o connec t up to two door phones (KX-T30865) and up to two door openers (us er-sup plied), a Doorphone Car d (KX-TD160) is requir ed.
General Installation 100 Installation Manual Doorphone Card Installation (for KX-TD160) 1. Connect a 4 -conductor modu lar connec tor to the Doo rphone Card Cabi net, and pass t he cord thr ough the gr oove in the ca binet. 2. Attach t he Doorphone Card Cabinet to the main unit and press down.
General Insta llation Installation Manual 101 Doorphone Card Installation (for KX-TD161) 1. Connect two 4-c onductor modul ar connectors to the Doorphone Card Cab inet, and pas s the cords thr ough the groove s in the c abinet. 2. Attach the Doorphone Card Cabinet to t he main unit a nd press do wn.
General Installation 102 Installation Manual Wirin g of the Doorphone (for KX- TD160) 1. Connect th e Doorphone Ca rd to the ter minal box u sing a 4-c onductor modula r connecto r . 2. Connect th e wires of doorphone 1 to the red an d green screws of the termin al box.
General Insta llation Installation Manual 103 Wiring of the Doorphone (for KX-TD161) 1. Connect the Doorphone Car d to the termin al box using two 4-conducto r modular connector s. 2. Connect the wires of d oorphone 1 to the r ed and green s crews of the t erminal box.
General Installation 104 Installation Manual 4-conductor wiring is required. Doorphone 3 (KX-T30865) Doorphone 4 (KX-T30865) Yellow Red Black Green Terminal Box Panasonic Panasonic 4-conductor wiring is required.
General Insta llation Installation Manual 105 Connecting Door Openers (for KX-TD160) 1. Loosen the s crew to remove the cover . 2. Loo sen th e scre ws on the te rmina l stri p.
General Installation 106 Installation Manual 3. Insert the wires comi ng from the door openers into holes and ti ghten the scr ews. Pass all the wires th rough the Ho lder . Note • The KX-TD123 2 is illust rated as th e main unit. • Set t he door open er paired wit h the doorphon e.
General Insta llation Installation Manual 107 Connecting Door Openers (for KX-TD161) 1. Loosen the s crew to remove the cover . 2. Loo sen th e scre ws on the te rmina l stri p.
General Installation 108 Installation Manual 3. Insert the wires comi ng from the door openers into holes and ti ghten the scr ews. Pass all the wires th rough the Ho lder . Note • The KX-TD123 2 is illust rated as th e main unit. • Set t he door open er paired wit h the doorphon e.
General Insta llation Installation Manual 109 Maximum cabling distance of the doorphone and the d oor opener line The maximum leng th of the door phone and doo r opener lin e that connec ts to the main unit is show n be low: Note The KX-TD1232 is illust rated as the main unit.
General Installation 1 10 Installation Man ual 2.4.10 SL T Message W aiting Lamp Adaptor Unit Connection Name and Locations Specif ications 1. General Des cription 2.
General Insta llation Installation Manual 1 1 1 W ARNING THIS UNIT MA Y ONL Y BE INST ALLED AND SERVICED BY QUALIFIED SER VICE PERSONNEL. W all Moun ting This unit can be mounted t o a wall. Refer to 2.2.3 W all Mounting Opening the fron t cover 1. Loosen the screw .
General Installation 1 12 Installation Man ual Frame Ground Con nection IMPOR T A NT Connect the system frame t o the ground. 1. Loosen the screw . 2. Insert the grounding wire.
General Insta llation Installation Manual 1 13 Inserting the Connector 1. Insert t he two 50-pin c onnectors to the jacks as shown bel ow . The connecto r "T O SYSTEM" should be connected t o the cable which is con nected to the KX-TD816 / KX-TD1232.
General Installation 1 14 Installation Man ual DC IN / OUT To another KX-TD194 (See "SLT Message Waiting Lamp Adaptor Unit Connection", "Location of Optional Cards and Units" in this section for a connection example.
General Insta llation Installation Manual 1 15 Cable Pins to Be C onnected CONN. PIN T o Sy stem Connector (CN1) T o Ex tens ion Connector (CN2) 26 1 AP T DA T A D1 D2 EXTN. 1 T R 27 2 EXTN. 1 T R EXTN. 2 T R 28 3 EXTN. 2 T R EXTN. 3 T R 29 4 EXTN. 3 T R EXTN.
General Installation 1 16 Installation Man ual Closing the Fr ont Cover 1. Fasten t he binders. 2. Replace t he cover a nd tighten th e screw . 3. T ie togethe r all of the connected cor ds and attach them to the wall so that the cords cannot be pulle d out of the sy stem.
General Insta llation Installation Manual 1 17 S tarting the unit Plug the AC co rd into t he system AC inle t and an AC out let. A void sharing the AC outlet of th is syste m with other of fice eq uipment. Use a dedicated AC outlet on ly . CAUTION The power s upply cor d is used as the main dis connect devi ce.
General Installation 1 18 Installation Man ual 2.4.1 1 System Connect ion *1 T o connect two mai n units, us e the optiona l System In ter Connect ion Cards (t wo) and the Connectio n Cable (i ncluded in the cards). 1. Insert the upper s ide of the Sys tem Inter Connection Card into two ho oks on the main un it (Maste r System).
General Insta llation Installation Manual 1 19 7. Close the l atches on bot h systems. 8. Ope n the RO M Cove r in th e Slav e Sys tem an d set th e Mast er / Sl ave Sw itch o n the CP U Card to "Slave" posi tion. 9. T urn the po wer on. Note • System Conn ection is co mpleted abo ut three minutes after the power is turned on.
General Installation 120 Installation Manual Pr ogramming Guide Refe r ence No programmin g required. Feat ur es Guide Re fere nce Syst em C onn ectio n.
General Insta llation Installation Manual 121 2.5 Auxiliary Connection for Power Failure T ransfer 2.5.1 Auxiliary Connection f or Power Failure T ransfe r Power Failur e T ransfer conne cts specif ic.
General Installation 122 Installation Manual Note • In t he event of a power fa ilure, s ystem memory is protected b y a fact ory-provided lithium battery . There is no memory loss excep t the memories of Camp-on, Saved Number Red ial, Last Number Redial, Call Park and Mes sage W aiting.
General Insta llation Installation Manual 123 2.6 Closi ng the Fr ont Cover 2.6.1 Closing t he Front Cover 1. Fasten al l the cables and cords wi th the co rd fastener . 2. Replace th e cover and tighten the screw . Note Be sure to tighten tw o screws, or t he unit may not wo rk properl y .
General Installation 124 Installation Manual 3. T ie togethe r all of the connected cor ds and attach them to the wall so that the cords cannot be pulle d out of the mai n unit.
General Insta llation Installation Manual 125 2.7 S tarting the System for the First T ime 2.7 .1 S tar ting th e Syste m for t he Fir st T ime 1. Set the Powe r Switch to th e "OFF" posi tion. 2. Set t he Sy stem Clear Switch to the "CLEA R" po sitio n.
General Installation 126 Installation Manual KX-TD1232 Notice • After pressin g the Reset Butt on, slide the System Clea r Switch t o the "NORMAL" pos ition at step 6 while the powe r indicator is flashin g (within approximately 10 seconds).
General Insta llation Installation Manual 127 2.8 System Restart 2.8. 1 Sys tem Res tart Afte r star ting th e sys tem, if the syste m does n ot op erate prope rly , restar t the s ystem . Befo re res tar ting th e sys tem, tr y th e syst em fe ature again to con firm whet her th ere de fini tely is a probl em or not.
General Installation 128 Installation Manual 2.9 System Data Clear 2.9.1 System Data Clear After st oring or cha nging the syst em programming dat a, it is pos sible to cle ar your programm ing data stor ed in the sys tem, if re quired. The sys tem will r estart with the defau lt settin g.
ISDN Installation Installation Manual 129 Section 3 ISDN Inst allation.
ISDN Installation 130 Installation Manual 3.1 ISDN Network Outline 3.1.1 Overview T o use the ISDN Lin e Service, the followin g unit can be i nstalled t o the KX-TD816 a nd KX- TD1232.
ISDN Installation Installation Manual 131 How to distinguish su ffix • System Pr ogramming is required for card loc ation ident ification. Programming Guide Refer ences [109] Expan sion Unit T ype F.
ISDN Installation 132 Installation Manual 3.2 ISDN Line Connection 3.2.1 Location of the Units KX-TD816 One ISDN Line Unit (KX-TD382, KX-TD384, KX-TD386 or KX- TD284) can be insta lled to any ex pansion area. Note • Syste m Programming i s required f or expansion u nit locat ion.
ISDN Installation Installation Manual 133 KX-TD1232 One ISDN Line Unit (KX-TD382, KX-TD384, KX-TD386 or KX-TD284) or one PRI ISDN Line Unit ( KX-TD290) can be i nstalled to any expansion area. Note • System Progr amming is requi red for ex pansion unit location.
ISDN Installation 134 Installation Manual 3.2.2 Installation the Unit S tep 6 is dif ferent for each unit. The KX-TD1232 i s illustra ted as the mai n unit. Atte ntion T o install an ISDN Li ne Unit, inst all the PLL (Ph ase Locked Lo ops) Card (KX-TD1 12) firs t.
ISDN Installation Installation Manual 135 1. Loosen tw o screws on th e cover pl ate. Insert fingers into the slits to remove the c over plat e. Note Any of th e cover plate s can be removed , as needed. 2. Connect the cabinet c ord to the co nnector in t he main unit fi rmly .
ISDN Installation 136 Installation Manual 4. Loosen the outside s crew and slid e the cover t o the righ t. 5. Secu re the insid e scre w (in clude d) to f ix the ca binet to the main unit. Note Be sure to fix the insi de screw to t he main unit , or the unit may not work p roperly .
ISDN Installation Installation Manual 137 6. Insert t he 8-pin mod ular plug int o a jack on the unit. If a KX-TD382 , KX-TD384 or KX-TD386 is t o be installed: Panasonic 2CO ISDN DIGITAL SUPER HYBRID.
ISDN Installation 138 Installation Manual If a K X-TD 284 is to be insta lled: a) Prepare t he requir ed plugs. (RJ45 : plugs ar e not includ ed in KX-TD284.) b) Inse rt the p lug in to a ja ck on the un it. Connect a gr ounding wire t o the ground t erminal on th e KX-TD284.
ISDN Installation Installation Manual 139 If a KX-TD290 is to be inst alled (KX-TD1232 onl y): Insert the plug int o a jack o n the unit . Connect a grounding wir e to the groun d terminal on t he KX-TD290. 7. T ie all of the cor ds into a bundle . If other cords are exposed in the upper cabinets, tie th em also.
ISDN Installation 140 Installation Manual 10. Fix the c ords to the wa ll as shown so that the f ront cover c an be opened. Note If two or three ex pansion units are inst alled, cut t he cabine t covers on th e lower cab inets to allow th e cords fr om the upper cab inet to go down through th e cabinet cov ers.
T1 Installatio n Installation Manual 141 Section 4 T1 Inst allation.
T1 Installation 142 Installation Manual 4.1 T1 Lin e Outlin e 4.1.1 Overview T o use the T1 Line , the followi ng unit is re quired. T1 Line Unit (KX-TD18 7) The unit a dds 24 channe ls (outside line number 25 t hrough 48 for KX- TD1232). If thi s unit is instal led, other optional cards which extend o utside lin es cannot .
T1 Installatio n Installation Manual 143 • The T1 Unit ( KX-TD187) can be in stalled to the only mas ter system of the KX-TD1232. • In the cas e of system con nection, t he basic or e xtended out side lines in the slave system cannot be u sed. • The capaci ty of outs ide lines i s the follows .
T1 Installation 144 Installation Manual 4.2 T1 Line Insta llatio n 4.2.1 Location of the Unit KX-TD1232 One T1 Li ne Unit (KX- TD187) can be insta lled to a ny expansion area on the maste r system o f KX-TD1232. Note • Syste m Programming i s required f or expansion u nit locat ion.
T1 Installatio n Installation Manual 145 4.2.2 Installing the Unit Install ing one u nit to the system a llows 24 chan nels to be connect t o outsid e lines (o utside l ine number 25 thr ough 48) for t he master sys tem of KX-TD1232. 1. Loosen tw o screws on th e cover pl ate.
T1 Installation 146 Installation Manual 3. Hoo k the c abine t to th e mai n unit and sl ide th e cabi net to the le ft unt il it i s secu red. 4. Loosen the outside s crew and slid e the cover t o the righ t. 5. Secu re the insid e scre w (in clude d) to f ix the ca binet to the main unit.
T1 Installatio n Installation Manual 147 6. Insert t he 8-pin mod ular plug int o a jack on the unit. 7. T ie all of the cor ds into a bundle . If other cords are exposed in the upper cabinets, tie th em also. 8. Clo se the cabin et cov er an d secu re the outsi de scr ew .
T1 Installation 148 Installation Manual 10. Fix the c ords to the wa ll as shown so that the f ront cover c an be opened. Note If two or three ex pansion units are inst alled, cut t he cabine t covers on th e lower cab inets to allow th e cords fr om the upper cab inet to go down through th e cabinet cov ers.
T roubl eshootin g Installation Manual 149 Section 5 T roubleshooting This sec tion pr ovides infor mation for sys tem and teleph one tr oubles hooting.
Troubleshooti ng 150 Installation Manual 5.1 T r oubleshooting 5.1.1 Installat ion PROBLEM PROBABLE CAUSE POSSIBLE SOLUTION Extension does not op erate. Bad printe d circuit b oard (Ext ensio n Ca rd). Exc hang e printe d circ uit bo ard fo r another pr inted ci rcuit board .
T roubl eshootin g Installation Manual 151 5.1.2 C onnection Connection between the system and a proprieta ry teleph one: Can you dial an extension? The T / R is connected to the D1 / D2. Use the correct cord (inner 2 wires are for T / R and the outer 2 wires are for D1 / D2).
Troubleshooti ng 152 Installation Manual Connectio n between t he central o ffi ce and the sys tem: T2 R1 T1 R2 Can you dial out on an outside line? No Outside lines are connected to the T2 / T1. Connection between the central of fice and the system: (Continued from the pre vious.
T roubl eshootin g Installation Manual 153 5.1. 3 Operation PROBLEM PROBABLE CAUSE POSSIBLE SOLUTION • Whe n using the speaker phone mode with a propri etary te lephone KX- T7130 or KX-T7030, noth ing is audibl e. • The HANDSET / HEADSET select or of the KX-T7130 or KX-T7030 is set to the "HEADSET" positi on.
Troubleshooti ng 154 Installation Manual 5.1.4 Using the Reset Button If the s ystem does not operate prope rly , use t he Reset Butto n. (If Mast er and Slav e Systems are i n operation by System Conne ction for KX-TD1232, reset both syst ems.
T roubl eshootin g Installation Manual 155 5. If the sy stem still does not work, switc h the pow er off. T hen c onsu lt an autho rized ser vice person.
Troubleshooti ng 156 Installation Manual.
Index 157 Section 6 Index.
Index 158 Nume ric s 2-ISDN Unit (KX-TD382) 27 4-CO Line Unit (KX-TD180) 27 4-DID Line Unit (KX-TD185) 27 4-ISDN Unit (KX-TD284) 27 4-ISDN Unit (KX-TD384) 27 6-ISDN Unit (KX-TD384) 27 8-Station Li ne .
Index 159 M Maxi mum Ca blin g Dista nce 47 , 48 Module Ex pansion 18 O Opening Fro nt Cover 43 Opening the front cover 11 1 Options 27 Outside Line Connection 45 P Paralleled Telephone Connection 18 .
PSQX2576Y A KA0801HK1052 Panasonic Consumer Electr onics Company , Division of Matsushita Electric Corporation of America One Panasonic W ay , Secaucus, Ne w Jersey 07094 www .panasonic.com Panasonic Sales Company (“PSC”), Division of Matsushita Electric of Puerto Rico, Inc.
Een belangrijk punt na aankoop van elk apparaat Panasonic KX-TD1232 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Panasonic KX-TD1232 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Panasonic KX-TD1232 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Panasonic KX-TD1232 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Panasonic KX-TD1232 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Panasonic KX-TD1232 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Panasonic KX-TD1232 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Panasonic KX-TD1232 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.