Gebruiksaanwijzing /service van het product PT 45LC12 van de fabrikant Panasonic
Ga naar pagina of 72
Models No. PT -40LC12/PT -45LC12 For assistance, please call : 1-888-VIEW PTV(843-9788) or send e-mail to : consumerproducts@panasonic.com or visit us at www .
2 For assistance, please call : 1-888-VIEW PTV(843-9788) Important Safety Instructions This symbol warns the user that uninsulated voltage within the unit may have sufficient magnitude to cause electric shock. Therefore, it is dangerous to make any kind of contact with any inside part of this unit.
3 Getting Started Important Safety Instructions This product has a High Intensity Discharge (HID) lamp that contains a small amount of mercury. It also contains lead in some components. Disposal of these materials may be regulated in your community due to environmental considerations.
4 For assistance, please call : 1-888-VIEW PTV(843-9788) W elcome to the Panasonic family of customers. W e hope that you will have many years of enjoyment fr om your new projection television set. T o obtain maximum benefit fr om your set, please r ead these Instructions befor e making any adjustments, and r etain them for futur e r efer ence.
5 Getting Started T able of Contents Cleaning the Air Filter ........................................................................................................ ........ 58 Clogged Air Filter Detection ............................................
6 For assistance, please call : 1-888-VIEW PTV(843-9788) Receiver Location This unit is intended to be used with an optional stand or entertainment center . Consult your dealer for available options. Locate for comfortable viewing. Avoid placing where sunlight or other bright light (including reflections) will fall on the screen.
7 Getting Started Accessories Requires two AA batteries (supplied). 1.Turn the T ransmitter face down. Remove top cover by pressing down on marking and sliding cover off in the direction indicated. 2.Install the batteries as shown in the battery compartment.
8 For assistance, please call : 1-888-VIEW PTV(843-9788) Number keys When 6 is pressed, channel 6 is displayed in single screen. (P . 29) Location of Controls Illuminated Remote Control POWER button Press to turn the projection display ON or OFF . (P .
9 Getting Started ASPECT button Changes the screen size. (P . 30) Light button Lights all buttons. The selected mode button (TV , VCR, etc.) flashes. TV/VIDEO button This input mode changes each time this button is pressed. (P . 33) Reduces volume Changes to the next channel up Increase volume The screen below is displayed for 5 seconds.
10 For assistance, please call : 1-888-VIEW PTV(843-9788) A A Open Controls and T erminals on the projection display < FRONT > LAMP indicator This indicator lights up when there is a malfunction with the lamp unit. (PP . 21, 60, 68) TEMP indicator This indicator lights up when there is an abnormal temperature in the unit.
11 Getting Started < REAR > Component signal input terminals (P . 16) A V out terminals (P . 17) Input 1 terminals (P . 15) Input 2 terminals (P . 15) Location of Controls VHF/UHF terminal (PP . 12-14) V ent Note: Make sure the vent is not clogged.
12 For assistance, please call : 1-888-VIEW PTV(843-9788) Connecting the Antenna / Cable to the RF in T erminal (No VCR) Antenna Connection For proper reception of VHF / UHF channels, an external antenna is required. For best reception an outdoor antenna is recommended.
13 Getting Started Cable Connection Use this configuration when connecting the projection display to a cable TV system. Notes: • Certain cable systems of fset some channels to reduce interference or have Premium (scrambled) channels. A cable converter box is required for proper reception.
14 For assistance, please call : 1-888-VIEW PTV(843-9788) Use this configuration when connecting the projection display to a cable TV system using VCR. Notes: • When the RF coaxial cable is connected to the projection display VHF/UHF terminal via a cable box or VCR, set the TV channel to CH3 or CH4.
15 Getting Started Installation How to connect the “1, 2, 3” Input T erminals Connects VCRs and other peripheral equipment Similar connections are available at the INPUT 1, 2, 3 input terminals. Notes: • Similar connections are available at the INPUT 1, 2, 3 input terminals.
16 For assistance, please call : 1-888-VIEW PTV(843-9788) How to connect the COMPONENT VIDEO Input T erminals Notes: • Similar connections are available at the COMPONENT VIDEO INPUT 1, 2 T erminals. • Select the desired COMPONENT VIDEO INPUT position by pressing the TV/VIDEO button.
17 Getting Started Installation How to connect the A V Out T erminals The “A V Out” T erminals output the same signals as the main picture on the projection display screen and sound from the speaker at that time, e.g. TV programs or signals from INPUT 1, 2, 3 terminals.
18 For assistance, please call : 1-888-VIEW PTV(843-9788) How to connect the PC Input T erminals Signal Names for D-SUB 15P Connector Pin Layout for PC Input T erminal Notes: • Some PC models cannot be connected to the set. A conversion adapter is required to use the RGB cable (D-SUB 15P) to connect a Macintosh computer to the set.
19 Getting Started Installation Analog RGB signals that can be input The table below lists the different types of analog RGB signals that can be input. If a signal which differs greatly from any of the types listed below is input, the picture image may not be displayed correctly , or a black background may be displayed.
20 For assistance, please call : 1-888-VIEW PTV(843-9788) Press the POWER button to turn the projection display on. (Refer to page 21 for “T urning the Power ON and OFF”.) 1 G N I D E E C O R P T E S O T U A H C Automatic Channel Setting is performed.
21 Basic Operation Power ON / OFF Always be sure to follow the procedure given below to turn the projection display power ON and OFF . • The lamp cooling fan will continue to operate for approximately 1 minute after the power is turned of f. At the same time, the POWER indicator will blink Red.
22 For assistance, please call : 1-888-VIEW PTV(843-9788) Flow Chart of Main menu 2 Use the , buttons to select an item. Select MENU desired by pushing Left “ ” button or Right “ ” button. Use the ACTION button to set or go to next menu screen.
23 Basic Operation Flow Chart of Main menu Returning to the previous screen If you press the RECALL button while a menu screen is being displayed, the display will return to the previous screen. Adjust items Set an item INFORMA TION screen P. 5 7 TO POSITION/SIZE ADJUST menu PP .
24 For assistance, please call : 1-888-VIEW PTV(843-9788) T uning channels Automatically searches and adds receivable channels to memory . Press the ACTION button to display the MENU screen and select SET UP . Press to select CHANNEL. Press to display the CHANNEL.
25 Basic Operation Notes: • After AUTO SET is finished, the lowest channel number added will be received. • Some channels with very weak signals may be locked into memory . It desired, these channels can be deleted manually using the MANUAL SET feature.
26 For assistance, please call : 1-888-VIEW PTV(843-9788) T uning channels Use this setting when changing setting of receiving channels or changing the channel display . 3 Press to select MANUAL SET . Press to display the MANUAL SET screen. Press the ACTION button to display the MENU screen and select SET UP .
27 Basic Operation 4 Press to select channel. Repeat steps 4 to continue adding or deleting channels. Press to add channels to memory . Press to select channel. Press to delete channels from memory . Press to exit menu. Note: Some channels with very weak signals may be locked into memory .
28 For assistance, please call : 1-888-VIEW PTV(843-9788) Projection display operation Operation can be done from the projection display . Press to select the desired volume level. Press to select the desired channel. (or use number keys ) Press to turn the projection display on.
29 Basic Operation Projection display operation Aspect types (P . 30) Receivable broadcast types (P . 35) Channel Channel caption (P . 52) TV status display Using the number keys Example 1: T o select channel 125, first press the 1 key , then 2, then 5.
30 For assistance, please call : 1-888-VIEW PTV(843-9788) ASPECT Controls The color monitor will allow you to enjoy viewing the picture at its maximum size, including wide screen cinema format picture. The aspect mode changes each time the ASPECT button is pressed.
31 Basic Operation ASPECT Controls Notes: • The screen size changes if ID-1 is detected. (P . 55) Mode NORMAL will display a 4:3 picture at its standard 4:3 size. Picture ZOOM FULL NORMAL JUST Explanation ZOOM mode magnifies the central section of the picture.
32 For assistance, please call : 1-888-VIEW PTV(843-9788) Searching for the desired channel (Channel search) When the SEARCH/REC button is pressed during single screen. When a channel button is pressed during channel search. • Number keys: Example: When 6 is pressed, channel 6 is displayed in single screen.
33 Basic Operation Playing peripheral equipment VCR DVD player This equipment can also be connected to the rear terminals. See Connections for details. T urning the power on and switching input modes T urn the projection display on. 1 2 The input mode changes each time this button is pressed.
34 For assistance, please call : 1-888-VIEW PTV(843-9788) Press this button to mute the sound. Press again to reactivate sound. Sound is also reactivated when power is turned off or volume level is changed.
35 Basic Operation The following are possible broadcast types with their accompanying on-screen displays. The signal being received is indicated with a “ ” mark while the selected audio mode is indicated with an arrow . T o change the audio mode for these broadcasts, follow the “Select Audio Mode for TV Viewing” section (below .
36 For assistance, please call : 1-888-VIEW PTV(843-9788) Notes: • Sound from the Left screen is output from the speakers on the projection display set. • When the screen is split, signals of the Left screen are output from the rear monitor output terminal.
37 Basic Operation Swapping left and right screens Example: During SPLIT SCREEN NORMAL. Split screen Changing the channel of the right screen 1 Press to swap. Example: During SPLIT SCREEN NORMAL. Note: When outside input is finished, the lowest regis- tered channel number is displayed.
38 For assistance, please call : 1-888-VIEW PTV(843-9788) Picture in Picture (PIP) Screen Y ou can view two pictures simultaneously using two tuners and picture in picture (PIP) display function. Display PIP screen Press to split (The previously selected screen appears on the Main.
39 Basic Operation Picture in Picture (PIP) Screen Swapping Main and PIP screens Press to swap. Changing the channel of the PIP screen Move PIP screen Y ou can move the PIP screen to four positions. Press repeatedly to select PIP position. Press to select the desired channel.
40 For assistance, please call : 1-888-VIEW PTV(843-9788) Adjusting screen position and size 4 Press the ACTION button to display the MENU screen and select ADJUST . Press to select POSITION/SIZE. Press to display POSITION/SIZE. Press to adjust POSITION/SIZE.
41 Advanced Operation Notes: • This projection display is equipped with various screen modes. If a screen mode with a different aspect from the broadcast program is selected, image will appear differently . Select the proper screen mode with this in mind.
42 For assistance, please call : 1-888-VIEW PTV(843-9788) Audio Adjustments 1 Press the ACTION button to display the MENU screen and select ADJUST . 2 Press to select AUDIO. Press to display AUDIO screen. 3 Press to select the menu to set each item. The sound level is automatically adjusted to suit the program source.
43 Advanced Operation Adjust the desired level by listening to the sound. BASS Adjusts low sounds TREBLE Adjusts high sounds BALANCE Adjusts left and right volumes Audio Adjustments 1 Repeat step 1 on page 42. 2 Press to select AUDIO ADJUST Press to display AUDIO ADJUST screen.
44 For assistance, please call : 1-888-VIEW PTV(843-9788) See next page Note: There is little change when PICTURE is increased with a bright picture or reduced with a dark picture. Picture Adjustments 1 Press the ACTION button to display the MENU screen and select ADJUST .
45 Advanced Operation Picture Adjustments Adjust the desired level by looking at the picture behind the menu. 2 Press to select PICTURE ADJUST . Press to display PICTURE ADJUST screen. Press to select the menu to set each item. 3 1 Repeat step 1 on page 44.
46 For assistance, please call : 1-888-VIEW PTV(843-9788) Lock Feature Press the ACTION button to display the MENU screen and select SET UP . Press to select LOCK.
47 Advanced Operation Lock Feature Setup US MOVIES Ratings 1 2 3 Perform “Enter Secret Code” step 1 on page 46. Press number keys to enter your secret code. Press to select US MOVIES. Press to set Press to select CHANGE SETTINGS. Press to display the CHANGE SETTINGS screen.
48 For assistance, please call : 1-888-VIEW PTV(843-9788) Setup US TV PROGRAMS Ratings 1 2 3 Perform “US MOVIES Ratings” step 1 on page 47. Press to select US TV PROGRAMS. Press to set. Press to select CHANGE SETTINGS. Press to display the CHANGE SETTINGS screen.
49 Advanced Operation Lock Feature TV-Y TV-Y7 TV-G TV-PG TV-14 TV-MA FOR ALL CHILDREN: Content specifically geared to young viewers ages 2-6. FOR AGE 7 AND OLDER: May contain mild physical or comedic violence which may frighten children under 7. GENERAL AUDIENCE: Contains little or no violence, strong language, or sexual dialogue or situations.
50 For assistance, please call : 1-888-VIEW PTV(843-9788) CAPTION MODE Activates the On-Screen Closed Caption feature. When activated this feature will remain on until OFF is selected in this menu. Closed Caption Modes from which to Choose Caption Mode: CAP C1 or C2 A narration of selected TV programs is displayed.
51 Advanced Operation Closed Captions 1 2 Press the ACTION button to display the MENU screen and select SET UP . Press to select CAPTION. Press to display the CAPTION screen. Press repeatedly to select CC ON MUTE. Press to select CC ON MUTE. Press to exit menu.
52 For assistance, please call : 1-888-VIEW PTV(843-9788) Station names, e.g. ABC, TNN, etc. so that they will appear when a channel is selected. Choose 24 preset names. Channel Caption Feature 1 2 Press the ACTION button to display the MENU screen and select SET UP .
53 Advanced Operation W eak Signal Display Feature 1 2 Press the ACTION button to display the MENU screen and select SET UP . ON : Picture is displayed regardless of signal condition, and may not always be clearly visible. OFF : Screen turns solid blue when signal is absent or weak.
54 For assistance, please call : 1-888-VIEW PTV(843-9788) V ideo NR (Noise Reduction) Feature 1 2 Press the ACTION button to display the MENU screen and select SET UP . ON : When signal is noisy OFF : When signal is high-quality Press to select VIDEO.
55 Advanced Operation Automatically changing screen size 1 2 Press the ACTION button to display the MENU screen and select SET UP . ON : When screen size specification signals are detected, screen size is automatically changed. OFF : The screen size is not auto- matically changed.
56 For assistance, please call : 1-888-VIEW PTV(843-9788) 1 2 Press the ACTION button to display the MENU screen and select SET UP . VGA : When RGB input signal is VGA 60Hz from PC 480P : When RGB input signal is 480P from other equipments Press to select VIDEO.
57 Advanced Operation Switching languages for display 1 Press the ACTION button to display the MENU screen and select SET UP . Press repeatedly to select the desired LANGUAGE. Press to select LANGUAGE. Press to exit menu. 2 The language of the Projection display is set to English as the factory setting.
58 For assistance, please call : 1-888-VIEW PTV(843-9788) Cleaning the Air Filter The Air Filter should be cleaned about every 400 hours. T urn the POWER button to OFF . W ait until the cooling fan stops and the POWER indicator turns solid red. Remove the right Speaker cover .
59 Information Cleaning the Air Filter Air Filter Replacement Remove the Air Filter unit Grasp the indented portion of the Air Filter and pull it out of the Projection display . Indent Replace the new Air Filter unit. Slide the new Air Filter into the Projection display so that the indentations of the filter and Projection display are aligned.
60 For assistance, please call : 1-888-VIEW PTV(843-9788) Replacing the lamp unit The lamp unit is sold separately . T o purchase a replacement, call the Panasonic accessory department, toll free at: 1-800-332-5368.
61 Information Remote Control Quick Reference Guide (Operating peripheral equipment) Programming The Illuminated Remote Control Using Access Codes The remote control can be preset for other manufactur.
62 For assistance, please call : 1-888-VIEW PTV(843-9788) Remote Control Quick Reference Guide (Operating peripheral equipment) 2 Setting to the remote using the step and set method (When code is not known): 3 4 1 2 Press and hold the POWER and ACTION buttons simultaneously for at least 5 seconds .
63 Information Remote Control Quick Reference Guide (Operating peripheral equipment) Infrared Codes Index The remote control is capable of operating many brands of peripheral equipment. Refer to page 61 and 62 for programming procedures. Note: The remote control memory is limited and therefore some models may not operate.
64 For assistance, please call : 1-888-VIEW PTV(843-9788) Remote Control Quick Reference Guide (Operating peripheral equipment) CABLE CONVERTER BOX AND DVD, CD PLA YERS Infrared Codes Index Maker Set Up No.
65 Information Remote Control Quick Reference Guide (Operating peripheral equipment) CASSETTE PLA YERS, PERSONAL VIDEO RECORDERS, RECEIVERS, AMPLIFIERS, and DBS Infrared Codes Index Maker Set Up No.
66 For assistance, please call : 1-888-VIEW PTV(843-9788) Remote Control Quick Reference Guide (Operating peripheral equipment) Quick Reference Functional Button Chart Notes: • Not all functions listed may be controllable. • Some TV , Cable Box and DSS Receiver brands require you to turn on the power manually .
67 Information Remote Control Quick Reference Guide (Operating peripheral equipment) Quick Reference Functional Button Chart BUTTON MODE FUNCTION DTV DBS Delimiter between major and minor channel numb.
68 For assistance, please call : 1-888-VIEW PTV(843-9788) T roubleshooting Before you call for service, determine the symptoms and make a few simple checks as shown below . Symptoms Checks Page • Is the power plug plugged in? Power does not turn ON 21 The power turns OFF • Check whether or not the vents are clogged.
69 Information Specifications Note: Design and Specifications are subject to change without notice. Weight and Dimensions shown are approximate. Operating conditions Power Source AC 120 V , 60 Hz Power Consumption Power ON: Approx. 280 W Power OFF: Approx.
70 For assistance, please call : 1-888-VIEW PTV(843-9788) Cleaning T o ensure continued excellent performance by this product, periodic cleaning is recommended. Remove dirt and soiling by wiping with a light cloth. Even if the unit is heavily soiled, do not apply cleaner directly to the unit.
71 Information Limited W arranty PANASONIC CONSUMER ELECTRONICS COMPANY, DIVISION OF MATSUSHITA ELECTRIC CORPORATION OF AMERICA One Panasonic Way Secaucus, New Jersey 07094 PANASONIC SALES COMPANY, DIVISION OF MATSUSHITA ELECTRIC OF PUERTO RICO, INC., Ave.
Customer ’ Record The serial number of this product can be found on its back cover . Y ou should note this serial number in the space provided below and retain this book, plus your purchase receipt, as a permanent record of your purchase to aid in identification in the event of theft or loss, and for Warranty Service purposes.
Een belangrijk punt na aankoop van elk apparaat Panasonic PT 45LC12 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Panasonic PT 45LC12 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Panasonic PT 45LC12 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Panasonic PT 45LC12 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Panasonic PT 45LC12 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Panasonic PT 45LC12 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Panasonic PT 45LC12 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Panasonic PT 45LC12 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
