Gebruiksaanwijzing /service van het product SC-PM10 van de fabrikant Panasonic
Ga naar pagina of 24
RQT6682-2B Note: “EB” on the packaging indicates the United Kingdom. Before connecting, operating or adjusting this product, please read these instructions completely . Please keep this manual for future reference. E CD Stereo System Operating Instructions Model No.
RQT6682 2 Before use Dear customer Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully.
RQT6682 3 Before use Safety precautions Placement Set the unit up on an even surface away from direct sunlight, high temperatures, high humidity, and excessive vibration. These conditions can damage the cabinet and other components, thereby shortening the unit’s service life.
RQT6682 4 Before use (For United Kingdom) (“EB” area code model only) For your safety, please read the following text carefully. This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 5-ampere fuse is fitted in this plug.
RQT6682 5 Before use The remote control A Battery installation Use of batteries • Align the poles (+ and –) properly when inserting the batteries. • Do not mix old and new batteries or different types of batteries. • Do not recharge ordinary dry cell batteries.
RQT6682 6 Before use Connections • Plug the AC mains lead into a household mains socket only after all other connections have been made. • To prepare the AM loop antenna wire and speaker cords, twist the vinyl cover tip and pull off. 1 Connect the FM indoor antenna.
RQT6682 7 Before use Connections Optional antenna connections You may need an outdoor antenna if you use this system in a mountainous region or inside a reinforced-concrete building, etc. FM outdoor antenna Disconnect the FM indoor antenna if an FM outdoor antenna is installed.
RQT6682 8 Before use Front panel controls A Main unit Headphone jack (PHONES) ..................................... 19 Cassette lid Cassette open button (OPEN c ) ............................ 15 Display Tuner/band select button (TUNER/BAND) ..........
RQT6682 9 Before use A Setting the time by remote control only This is a 24-hour clock. The example shows how to set the clock for 18:30 (6:30 pm). 1 Press [ y y y y y ] to turn the unit on.
RQT6682 10 Before use A B 1 2 3 4 4 1 3 TUNER BAND REW FF DOWN UP VOLUME 123 45 6 789 0 10 VOL VOL VOL VOL REW FF FM MODE DIMMER DIMMER DISPLA DISPLA Y MU MU T ING ING BASS BASS TREBLE TREBLE PLAY SLE.
RQT6682 11 Listening operations The radio: preset tuning by remote control only There are two methods of presetting stations. Automatic presetting: All the stations the tuner can receive are preset. Manual presetting: You can select the stations to preset and the order they are preset in.
RQT6682 12 Listening operations CDs This unit can play CD-DA (digital audio) format audio CD-R and CD-RW that have been finalized (a process that enables CD-R/CD-RW players to play audio CD-R and CD-RW) upon completion of recording. It may not be able to play some CD-R or CD-RW due to the condition of the recording.
RQT6682 13 Listening operations CDs by remote control only A Direct access play Direct access allows you to start normal play from a specific track to the last track on the CD. 1 Press [STOP L ] to select the CD mode. Every time you press the button: TAPE ↔ CD 2 Press the numeric button(s) to select the desired track number.
RQT6682 14 Listening operations CDs Program play by remote control only This function allows you to program up to 36 tracks. 1 Press [STOP L ] to select the CD mode. 2 (In the stop mode) Press [PROGRAM/–CLEAR]. 3 Press the numeric button(s) to select the track you want to play in the desired sequence.
RQT6682 15 Listening operations Cassette tapes 1 Press [OPEN c ] insert a cassette with the tape facing in. When the button is pressed, the unit comes on automatically. Make sure the cassette is fully inserted and close the lid by hand. 2 Press [TAPE 3 ] to start playback.
RQT6682 16 Listening operations C Recording the radio Preparation: • Wind up the leader tape. • To record from halfway through the tape Wind the tape up to where you want to start recording. 1 Insert the cassette to be recorded on. ( page 15) 2 Tune to the required station.
RQT6682 17 Listening operations Recording CDs Normal recording • Tracks are recorded in the order in which they are found on the CD. • Tracks are cut in the middle when the end of the tape is reached. • You can record from any point on the tape.
RQT6682 18 Listening operations Recording CDs A ALL-REC You can record a whole CD with the ALL-REC function. It is not necessary to rewind the cassette. Recording always begins from the beginning of the side facing up. Preparation: Insert a CD ( page 12).
RQT6682 19 Listening operations Sound Quality A Using the built-in sound quality settings You can choose one of four types of sound quality. HEA VY : Adds punch to rock SOFT : For background music CLEAR: Clarifies higher sounds VOCAL: Adds gloss to vocal Press [PRESET EQ] to select a setting.
RQT6682 20 Listening operations Using the timers Using the play/record timer by remote control only The timer has two functions. It can be set to on at a certain time to wake you up, or it can be set to record the radio. The play timer cannot be used in combination with the record timer.
RQT6682 21 Listening operations Using the timers A Using the play/record timer by remote control only To check the settings Press [CLOCK/ TIMER]. (When the unit is on, press [CLOCK/TIMER] to select ” ˚ ˚ ˚ ˚ ˚ PLAY” or “ ˚ ˚ ˚ ˚ ˚ REC”.
RQT6682 22 Listening operations Troubleshooting guide Before requesting service, make the below checks. If you can’t fix the system as described below, or if something not listed here occurs, refer to the enclosed directory to locate an Authorized Service Center convenient to you or contact your dealer.
RQT6682 23 Listening operations Technical specifications Maintenance CD SECTION Sampling frequency 44.1 kHz Decoding 16 bit linear Beam source Semiconductor laser Wavelength 780 nm Number of channels .
RQT6682 24 Listening operations CAUTION! THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF.
Een belangrijk punt na aankoop van elk apparaat Panasonic SC-PM10 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Panasonic SC-PM10 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Panasonic SC-PM10 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Panasonic SC-PM10 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Panasonic SC-PM10 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Panasonic SC-PM10 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Panasonic SC-PM10 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Panasonic SC-PM10 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
