Gebruiksaanwijzing /service van het product TU-DST51 van de fabrikant Panasonic
Ga naar pagina of 65
.
Table of Contents Safety Instructions ............................................... 2 Information on Digital Television ........................ 4 Digital Television ........................................................................... 4 Digital Broadcasting and Cable TV .
SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS WARNING _VARNING: To reduce the risk of electric shock do not remove cover or back. No Llser-serviceable parts inside.
SAFETY INSTRUCTIONS EXAMPLE OF ANTENNA GROUNDING_AS ANTENNA, LEAD-IN PER NATIONAL ELECTRICAL CODE (NEC_._.._ _p-_- W_RE GROUND DISCHARGE UNIT [NEC SECTION 810-20 / ELECTRIC SERVICE GROUNDING CONDUCTORS POWI:: R SERVICE GROUNDING EUECTRODE SYSTEM (NEC ART 250, PART H) 14.
INFORMATION ON DIGITAL TEL E VISION Information on Digital Television Digital Television In April 1997, the Federal Communications Commission (FCC) announced that by 2006, all television broadcasting will be digital. However, television stations are required to continue broadcasting regular TV signals along side the digital signals until 2006.
INFORMATION ON DIGITAL TELEVISION Digital Picture Formats DTV supports eighteen (18) Advanced Television Systems Committee (ATSC)' display formats, which are variations of the four (4) following formats: 1080i (interlaced), 720p (progressive), 480p (progressive) and 480i (interlaced).
INFORMATION ON THE SET-TOP BOX Information on the Set-Top Box Panasonic Digital Set-Top Box model TU-DST51 Current Conventional Televisions Panasonic's digital set-top box (STB) model TU-DST51 uses specially developed chips which allow current televisions (with A/V inputs) to display digitally broadcast programs.
CONGRA TULA T/ON,£ Congratulations Your Panasonic digital set-top box (STB) features state-of-the-art technology for high-quality picture and sound with complete audio/video output jacks for your home theater system. D'TV signals are displayed in either an interlaced or progressive format, providinga clear, crisp picture.
IMPORTANT NOTES Important Notes STB Location This unit can be used as part of an entertainment center. Consult your dealer for available options. £3 Avoid excessive sunlight or bright lights. O Keep away from excessive heat or moisture. Inadequate ventilation may cause internal component failure.
Antenna/Cable Connection IMPORTANT NOTE,_ For proper reception, an antenna or cable connection is required. Antenna Connection For proper reception of VHF/UHF channels, a directional antenna is required (see previous page). For best reception, an outdoor antenna is recommended.
FRONT ANO REAR VIEW OF THE SET-ToP BOX Front and Rear View of the Set-Top Box Front Panel The following is a labeled illustration of the front panel of the STB.
Features of the Set-Top Box FEATURES OF THE SET-ToP BOX Channel and Program Tuning - DTV Channel and program tuning in digital television is very different from current conventional television. In DTV, up to six (6) multiple programs can exist within a single 6 MHz channel.
FEATURES OF THE SET-TOP BOX Channel Banner The Channel Banner is used by all tuning methods; DTV (Native, 1080i/480p and 480p) and TV (NTSC) mode to show you which channel and program you are currently viewing or selecting. The banner will appear in the upper right hand side of your TV screen.
Unavailable Channel Selection FEATURES OF THE SET-TOP BOX The unavailable channel selection screen is displayed when you select an unavailable channel. The following is a list of some possible situations where an unavailable channel selection may occur.
FEATURES OF THE SET-TOP BOX ATSC Display Formats The STB converts all eighteen (18) ATSC display formats available in DTV into viewable programming. The display formats are variations on the four (4) formats, 1080i, 720p, 480p and 480i. The following table shows the four (4) formats, their resolutions and aspect ratios.
FEATURES OF THE SET-TOP BOX 480p If your TV is capable of displaying 480p format only, then set the OUTPUT MODE switch to 480p. 1080i 720p 480p 480p 480i NTSC Mode If your TV is capable of displaying NTSC format only, then set the OUTPUT MODE switch to NTSC.
FEATURES OF THE SET-TOP BOX Shrink Aspect The source aspect ratio will be maintained and the picture will shrink into full view on the screen. Sidebar Aspect 4:3 pictures will be viewed on a wide aspect TV screen with vertical bars on both sides of the picture.
ASPECT RATIO FORMATS B Source Signal 4 FULL ZOOM SIDEBAR EXPAND ZOOM LETTERBOX SHRINK T The 16:9 and 4:3 pictures represent the incoming source signals received by the STB. These pictures show the different aspect ratios available with a 16:9 monitor format.
FEATURES OF THE SET*TOP BOX Digital Interface for Panasonic D-VHS VCR The digital interface on the STB allows the transfer high speed digital data between devices. With the digital interface, there is no need to first convert digital data into analog, eliminating the loss of data integrity.
GETTING STARTED Getting Started Step 1. Connect AC Power Cord Plug the AC power cord into a grounded outlet. Do not turn on any devices until you have finished making all necessary connections. Step 2. Set-Top Box Connection to DTV-Compatible TV Follow this diagram when connecting the STB to a DTV-compatible TV.
GETTING STARTED Step 2a. Set-Top Box Connection to Conventional TV Follow this diagram when connecting the STB to a conventional TV. NOTE: VIDEO AND AUDIO CABLES NOT INCLUDED TV Incoming signal from antenna or Connect the cab1i VIDEO _ _ k/Rvide°audioand I oa0,os "_ STB _ Panason c ® _ .
GETTING STARTED Step 3a. Digital TV/Standard TV Reception with DTV-Compatible TV Follow this diagram if you have a DTV-compatible TV, no cable service and you want to receive digital channels through the STB and standard channels through the TV. An additional antenna may be required depending on which frequencies your current antenna can receive.
GETTING STARTED Step 3b. Digital TV/Standard TV Reception with Conventional TV Foltow this diagram if you have a conventional TV, no cable service and you want to receive digital channels through the STB and standard channels through the TV. An additional antenna may be required depending on which frequencies your current antenna can receive.
GETTING STARTED Step 3c. Digital TV/Cable Reception with DTV-Compatible TV Follow this diagram if you have a DTV-compatible TV, cable service and you want to receive digital channels through the STB a.
GETTING STARTED Step 3d. Digital TV/Cable Reception with Conventional TV Follow this diagram if you have a conventional TV, cable service and you want to receive digital channels through the STB and cable channels through the cable box (or through the TV if you have no cable box.
GETTING STARTED Step 3e. Digital 8VSB Cable/Analog Cable with DTV-Compatible TV Follow this diagram if you have a DTV-compatible TV, cable service providing 8VSB digital cable and you want to receive digital cable channels through the STB and analog cable channels through the cable box (or through the TV if you have no cable box).
GETTING STARTED Step 3f. Digital 8VSB Cable/Analog Cable with Conventional TV Follow this diagram if you have a conventional TV, cable service providing 8VSB digital cable and you want to receive digital cable channels through the STB and analog cable channels through the cable box (or through the TV if you have no cable box).
GETTING STARTED Step 3g. NTSC Analog Cable Connection Follow this diagram if you want to monitor the NTSC analog signal. NOTE: RF CABLES, VIDEO AND AUDIO CABLES NOT INCLUDED Analog Signal ANALOG CABLE.
GETTING STARTED Step 4. Turning STB On Procedure • Press the Remote Control DTV mode button _. • Press the POWER button. Note: Monitor/'l-Vshould also be turned on. Step 5. Switching to DTV Mode (Panasonic TV models) Press the Remote Control TV/VIDEO button until DTV or Component Video input appears on the MonitorFFVscreen.
Step 6a. ACTION / Navigation Button GETTING STARTED Press the ACTION button to select main menu items. Press the • or • arrows to highlight sub menus. Press the • arrow to select features. Press the • or • arrows to scroll through options within a feature.
GETTING STARTED Step 8. Programming Available Channels YOU MUST PERFORM THE AUTOMATIC CHANNEL PROGRAMMING BEFORE MANUALLY ADDING AND DELETING CHANNELS BECAUSE OF THE DIGITAL TUNING SYSTEM USED BY THE STB. THIS METHOD WILL ENSURE THAT EVERY AVAILABLE CHANNEL IS CAPTURED AND STORED INTO MEMORY.
Installation Set-Top Box Connection to Panasonic D-VHS VCR Follow this diagram when connecting the STB to a D-VHS VCR. INSTALLA TION Incoming signal from antenna or cable D-VHS VCR DTV-Compatible TV P.
INSTALLATION Set-Top Box Connection to VCR Follow this diagram when connecting the STB to a standard VCR. NOTE; VIDEO AND AUDIO CABLES NOT INCLUDED Incoming signal from antenna or TV STB 1 I VCR SETUP Procedure Move the output mode switch to the NTSC position.
Optional Connec_ons OPTIONAL CONNECTIONS Set-Top Box Connection to Dolby Digital AC-3 Decoder Follow this diagram to connect the STB to a Dolby Digital AC-3 decoder, Incoming signal from antenna or Do.
REMOTE CONTROL Remote Control ASPECT (Ratio) EUR511157 *To conserve batt_y _le, the LIGHT func_n can be disabled/er_bled by presszng R-TUNE and RECALL simultaneously.
REMOTE CONTROL FUNCTIONAL KEY CHART Remote Control Functional Key Chart Turn €ompofterlbl On and Off LIGHT Illuminate bnttona MUTE © Mute audio W/VIDEO © Switch between €o_sent and "W ASPEC.
REMOTE CONTROL FUNCTIONAL KEY CHART Remote Control Functional Key Chart VOLUME CHANNEL GUIOE C_ EXIT TVvolumedownand up Cable volume downand up Recelvervolume down and up VCR REC Record MOVE REW Move .
REMOTE CONTROL FUNCTIONAL KEY CHART Remote Control Functional Key Chart R-TUNE O RECALL O ®® ®® @® @ 1%" CBL DeS OTV DVD LD CD (AUX) AUX (Cassette Deck) TV VCR DV_LD DBS DTV €o (AUX) • O.
SPECIAL REMOTE BUTTONS Special Remote Buttons ASPECT Aspect Ratio Selections _) The ASPECT button changes the aspect ratio (picture display shape) in response to the source signal and monitor format. You can also change the aspect ratio for your personal viewing preference.
Source Signal 16 ASPECT RATIO FORMATS ZOOM SIDEBAR EXPAND FULL ZOOM LETFERBOX SHRINK 4 T The 16:9 and 4:3 pictures represent the incoming source signals received by the STB. These pictures show the different aspect ratios available with a 16:9 monitor format.
SPECIAL REMOTE BUTTONS TV/VIOEO TV/Video C) The W/VIDEO button allows you to select the mode of your TV. Each time the TV/ VIDEO button is pressed, the TV will cycle through Channel, Video 1, Video 2, Video 3 and D'iV modes. Note: Not all television models will display all the modes.
PROGRAMMING THE REMOTE CONTROl Programming the Remote Control The Universal Remote Control can be programmed to operate many manufacturers' components using the component function buttons for VCR, DVD, AUX (RCVR, CD, TAPE, CASSETTE DECK and LD), CBL, D'I-V, TV, or DBS.
COMPONENT CODES Component Codes The Universal Remote Control is capable of operating many component brands after entering a code. Some components may not operate because memory is limited• The Universal Remote Control does not control all features in all models.
Codes for VCR COMPONENT CODES Admiral Aiwa Aka! Audio Dynamic Broksonic Cenon Citizen Curtis Mathes DBX Emerson Funai Go Video Hitachi J.C. Penney JVC LXI Mamntz Memorex Minolta Multitech Olympic 137,160 0!4, 015, 0J6 142 011,240 005 013 081,136 125, 135 006 005, 006 i41 .
COMPONENT CODES Codes for CD _erver 550 Denon 600 Fisher 405 HarmardKar- don 459, 460, 462 JVC 590, 591,670 Kenwood 400, 401,450, 670 Magnavox 550 Marantz 550 Mclntosh 460 ; Optimus 430, 459 P_ 500, 5.
COMPONENT CODES Codes for Laser Disc Codes for Receiver/Amplifier Admiral 710 Aiwa 760, 761 Denon 800,801,802 Fisher 604 Garrard 655 Harman 657,750 Jansen 764 JVC 790,791 ;enwood 600 650 Magnavox 162 .
ROLLER GUIDE MENU TM Roller Guide Menu TM Press the MENU button on the Remote Control to display the Roller Guide Menu, Press the • or • arrow to rotate the Roller Guide.
ROLLER GUIDE FEATURE CHART Roller Guide Feature Chart Roller Guide Feature Chart g SET UP SET UP f3 SOURCE - Select one of the following: • ANTENNA (default setting) - VHF/UHF • Cable STD - Standa.
ROLLER GUIDE FEATURE CHART Roller Guide Feature Chart (Cont.) O BACKDROP BACKDROP Black (not recommended) Gray (default setting) [] INFO - Select ON or OFF for the Format INFO Info Banner, _,ONTROLS [] MINIMIZE / • i ill TIMER D-VHS [3 CONTROLS - Select to display D-VHS VCR Control Panel buttons and status box.
Special Features SPECIAL FEATURES SET UP Antenna/Cable Mode Select either Antenna or Cable mode, depending on the type of incoming signal you are using.
SPECIAL FEATURES Channel Mapping Select ON for automatic channel mapping functions. The Channel Mapping feature allows the STB to match the actual DTV broadcast channel (assigned to your local TV station) to the channel number that the station uses to identify itself.
SPECIAL FEATURES Programming Available Channels You must perform the automatic channel programming before manually adding and deleting channels because of the digital tuning system used by the STB. This method will ensure that every available channel will be captured and stored into memory.
SPECIAL FEATURES Clock Set the time for the STB system clock. TIME will display on screen after pressing the POWER button, RECALL button, or when changing channels. (Clock must be set to use the "Rmer feature). o In SET UP Menu, select CLOCK to set the STB clock.
SPECIAL FEATURES (Closed Captioned) The STB contains a built-in decoder that is capable of providing a visual display of the audio portion, The program viewed must provide Closed Captioning (CC) for the television to display it. CC is displayed in the form of text across the screen (white or colored letters on black background).
SPECIAL FEATURES D-VHS D-VHS VCR Control Panel The STB allows you to control a Panasonic D-VHS VCR through the digital interface. The on-screen panel of D-VHS VCR control buttons in the D-VHS menu lets you record and playback digital programs. Note: The STB must be on whenD-VHS VCR is recording.
SPECIAL FEATURES D-VHS VCR Status Messages The STB will report status information about the D-VHS VCR in the status box. The following table is a list of possible status messages.
SPECIAL FEATURES TIMER Timer I and Timer 2 The STB contains two timers that are capable of turning the STB on and off at selected times, on selected channels and on selected days. You can also set your STB to simultaneously turn your D-VHS VCR on to recording mode.
SPECIAL FEATURES The TIMER is active when the STB is OFF or ON. The STB wilr switch to the selected channel at the selected time set in the TIMER, Timer Error Messages The STB will scan the timer data fields and notify you of any problems before letting you set the Mode.
SPECIAL FEATURES NTSC TUNER OPERATIONS This STB has a separate NTSC tuner. The NTSC output can be displayed on a monitor with composite video inputs, Main Menu Press the NTSC button on the Remote control, Press the ACTION button on the remote control to display the MAIN MENU.
SPECIAL FEATURES MANUAL PROGRAM After programming all available channel, you can use the MANUAL PROGRAM feature to selectively add or delete channels. Procedure O In MAIN MENU select MANUAL PROGRAM. O Press the ACTION button on the remote control to display the menu features.
SPECIAL FEATURES ANTENNA SOURCE Select TV or CABLE depending on the incoming signal source. Procedure _3 In MAIN MENU, select ANTENNA SOURCE. £3 Press the ACTION button on the remote control to displaythe menu features. £3 Press the • or • arrow to select TV or CABLE.
SPECIAL FEATURES AUDIO SETUP Select STEREO, SAP or MONO, STEREO - For two channel audio reception. SAP - (Second Audio Program). Tunes to the alternate audio channel, if available (bilingual or descriptive audio). MONO - One channel audio. Use when stereo signal is weak.
TROUBLESHOOTING Troubleshooting Before requesting service for this unit, check the table below for a possible cause of the problem you are experiencing. Some simple checks or a minor adjustment on your part may eliminate the problem and restore proper operation.
TROUBLESHOOTING The ACTION button is not responding .Make sure to press ACTION in the middle of the button. • Make sure the remote control is in DTV or NTSC mode. Set the POWER button to OFF and then back to ON. Alternatively, turn No key operation (by the unit and/or off the power, disconnect the power plug and then reconnect it.
NOTES [].
Een belangrijk punt na aankoop van elk apparaat Panasonic TU-DST51 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Panasonic TU-DST51 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Panasonic TU-DST51 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Panasonic TU-DST51 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Panasonic TU-DST51 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Panasonic TU-DST51 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Panasonic TU-DST51 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Panasonic TU-DST51 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
