Gebruiksaanwijzing /service van het product UF-7000 van de fabrikant Panasonic
Ga naar pagina of 28
Facsimile Operating Instructions (For User Authentication) Model No. UF-7000/7100/8000/8100 Before operating this machine, please read this manual completely and keep this manual for future reference.
2 The following trademarks and registered trademarks are used throughout this manual: Microsoft, MS-DOS, Windows , Windows NT and Windows Server are either registered trademarks or trademarks of Microsoft Corporation in the USA and other countries.
3 Table of Contents General Description .......................................... 4 User Authentication .................................................................................... 4 Job Tracking ..............................................
User Authentication The User Authentication works for the devices under the management of the Windows Server. As a result, users must be authenticated before they can use the functions of the machine (copying, faxing, scanning, and printing). The supported authentication protocol is NTLM v2.
5 General Description W indows Ser ver System Administrator Pa nasonic De vice PSTN LAN Login data Usage log and send/receive log Job Tracking When using User Authentication, it is also possible to use the Job Tracking function as well.
6 General Description 7 General Description RightFax Server By enabling Right Fax Server function, all the faxes will be sent via the Right Fax Server. All the fax logs can be easily be managed by a single server. When using with the User Authentication function, it will increase the security by controlling the usage and identifying the users.
6 General Description 7 General Description Memo.
8 Using Machine (for User) 9 Using Machine (for User) Login Procedure (Using Copy/Fax/Scanner/Printer) Users must enter login name and the password before using the devices which User Authentication function is enabled. Authentication is performed using the user's Windows account.
8 Using Machine (for User) 9 Using Machine (for User) MMM-DD-YYYY 16:30 00% Note: One of the following messages appears if authentication fails. This completes authentication. After completing authentication, you can use the selected functions (copying, faxing, scanning, or printing).
10 Using Machine (for User) 11 Using Machine (for User) 1 STN(S) ARE SET ADD MORE OR START *STORE* NO. 001 PAGES=001 01% ENTER STATION(S) THEN PRESS START 00% Sending a Document via RightFax When the RightFax server is used to send a fax, the following details are entered in the recipient (TO) eld and sender (FROM) eld.
10 Using Machine (for User) 11 Using Machine (for User) Memo.
12 Setting Machine Access Code Setting Before you can setup the User Authentication, Job Tracking, or RightFax Server function, you rst need to set the machine's access code. Note: To clear the access code, change the setting of the User Authentication (Fax Parameter No.
13 Setting Machine Continued on the next page... Authentication Setting The system administrator can enable/disable the user authentication for each function (copying, faxing, scanning, and printing). Press FUNCTION SET . ENTER ACCESS CODE Enter the access code (4-digit) set for the machine, and press SET .
14 Setting Machine 15 Setting Machine Specify the TIME ZONE, the system administrator name, and password. TIME ZONE USE OR TO SCROLL Press or to select the time zone. TIME ZONE GMT-5 Eastern US&CN Press SET . ADMINISTRATOR NAME ENTER NAME Enter the administrator name you wish to use, and press SET .
14 Setting Machine 15 Setting Machine The next function appears (Return to step 4). To continue setting, press SET , select (INVALID) or (VALID) for each function, and press SET . 126 USER AUTH 2:FAX Press SET . 126 USER AUTH 1:INVALID Select (INVALID) or (VALID), and press SET .
16 Setting Machine Registration of Domain Name This sets the NT domain names and DNS sufx to use for user authentication. Press FUNCTION SET . ENTER ACCESS CODE Enter the access code (4-digit) set for the machine, and press SET . ENTER ACCESS CODE **** Press , and select "AUTH DOMAIN".
17 Setting Machine If the ID Timeout Setting is set to "AUTO RESET TIME", authentication is cancelled if no operation is performed on the machine for a specied time period after performing authentication. The ID timeout period is set by the "AUTO RESET TIME Setting" on page 18.
18 Setting Machine Auto Reset Time Setting This sets the ID timeout period when "AUTO RESET TIME" is selected for the ID Timeout Setting. Note: When the User Authentication function is enabled, you must login to the machine to change settings.
19 Setting Machine Lockout Setting The system is locked if the permitted number of logon attempts is exceeded during the user authentication. This sets the number of permitted number of logon attempts and the lockout time (minutes). Note: When the User Authentication function is enabled, you must login to the machine before you can change settings.
20 Setting Machine Authentication Method Setting This species which authentication method is to be used by the User Authentication function. Note: When the User Authentication function is enabled, you must login to the machine before you can change settings.
21 Setting Machine Continued on the next page... Job Tracking Setting This enables or disables Job Tracking. If Job Tracking is enabled, also set the type of log to record and the Email address to which it is to be sent. Login to the machine, and press FUNCTION SET .
22 Setting Machine SET : (ON) Always printout. SET : (INC) Printout only if the log was unable to be sent to the specied destination. Select the way to printout the received document(s). This parameter is only enabled if the RX or TX&RX is selected on the step 5.
23 Setting Machine RightFax Server Setting This enables or disables the RightFax server. Note: When the User Authentication function is enabled, you must login to the machine to change settings. See the following sections for details about how to login.
24 Appendix Administrator Login This authenticates the system administrator who manages the Panasonic machine. After logging in to the machine, the system administrator can set up the authentication function. The login prompt appears if the user authentication function has been enabled.
25 Appendix Administrator Name & Password The user name and password for the system administrator are set in "Authentication Setting" on page 13 when user authentication is enabled for the rst time. Use the following procedure if you subsequently wish to change the system administrator name or password.
Description of Job Tracking Notice 1 2 3 5 6 7 8 4 Job Type Fax Transmission via PSTN Email Transmission to Internet Fax / PC Reception via PSTN Reception from Internet Fax / PC 1.
Memo 26 Appendix 27 Appendix.
P ANASONIC DIGIT AL DOCUMENT COMP ANY MAKES NO W ARRANTIES, GUARANTEES OR REPRESENT A TIONS, EXPRESSED OR IMPLIED, TO THE CUSTOMER WITH RESPECT TO THIS P ANASONIC MACHINE, INCLUDING BUT NOT LIMITED T O, ANY IMPLIED W ARRANTY OF MERCHANT ABILITY OR FITNESS FOR A P ARTICULAR PURPOSE.
Een belangrijk punt na aankoop van elk apparaat Panasonic UF-7000 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Panasonic UF-7000 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Panasonic UF-7000 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Panasonic UF-7000 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Panasonic UF-7000 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Panasonic UF-7000 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Panasonic UF-7000 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Panasonic UF-7000 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
