Gebruiksaanwijzing /service van het product 881 van de fabrikant ParaBody
Ga naar pagina of 26
1 881 LEG PRESS ADAPTER KIT FOR 880 GYM SYSTEM CLASS H PAR T # 7168701 REV . C V ersion: 881 102 Revision: 3/08/02 USER’S GUIDE W ARNING: Read and follow all directions for each step to insure proper assembly of this product.
THERE IS A RISK ASSU MED BY IND IVIDUAL S W HO USE T HIS TYPE OF EQUIPMENT. TO MINIMIZE RISK F OLLOW THESE RULES ! 1. Before u sing, read al l the w arnings and in structi ons on the use of this mach ine. Use only for intended exercise. DO NOT mo dify th e machine.
IMPOR T ANT NOTES Please note: T ools Required for Assembly * Thank you for purchasing the ParaBody 881 LEG PRESS ADAPTER KIT . Please read these instructions thoroughly and keep them for future reference. This product must be assembled on a flat, level surface to assure its proper function.
PARTS LIST 4 PA R T # 7160008 7156001 7156102 31 16201 3102501 3102802 3102924 3102922 3102905 3102935 KEY 1 2 3 4 5 6 7 8 9 10 QTY 1 1 1 9 7 8 4 2 3 5 PA R T # 6533501 3102807 6122701 6480301 7242408.
STEP 1: FIGURE 1 0 1 2 34 5 6 1/2 1/2 1/2 1/2 1/2 1/2 • REMOVE the LA T CABLE, THREADED HOUSING , 3/8 X 3-3/4” BOL T , two 3/8 X 1” SP ACERS and one 3/8” LOCK NUT from the 880 GYM SYSTEM. See FIGURE 1. Save the LA T CABLE if you ever plan to purchase the SECOND ST ACK OPTION.
6 STEP 2: FIGURE 2 • Remove the PEC ST A TION P AD from the FRAME, then discard the two 3/8 X 2-3/4” BOL TS. See FIGURE 2. 3/8 X 2-3/4” STEP 3: FIGURE 3 • SECUREL Y assemble the PULLEY BRACKET (15) and the PEC ST A TION P AD to the FRAME using two 3/8 X 3” BOL TS (18).
STEP 4: FIGURE 4 7 • Remove the two 3/8 X 4” BOL TS, four 3/8” W ASHERS and two 3/8” LOCK NUTS from the REAR UPRIGHT as shown in FIGURE 4. Discard the 3/8 X 4” BOL TS.
STEP 6: FIGURE 6 • Route the SHOR T LEG CABLE (2) through the FRAME and BOOM BRACKET as shown in FIGURE 4. (NOTE: Remove pulleys for ease of installation.
STEP 7: FIGURE 7 • Route the SHOR T LEG PRESS CABLE (2) through the PULLEY PLA TES as shown in FIGURE 7. 3/8 X 1-3/4” 7 • Route the SHOR T LEG PRESS CABLE (2) around one 3-1/2” PULLEY (4) and assemble the PULLEY to the PULLEY BRACKET (15) using one 3/8 X 1-3/4” BOL T (7) and one previously removed 3/8” LOCK NUT .
STEP 8: FIGURE 8 • Remove the 3-1/2” PULLEY , one 3/8 X 3-3/4” BOL T , two 3/8 X 1” SP ACERS and one 3/8” LOCK NUT from the BASE PLA TES as shown in FIGURE 8.
11 STEP 10: FIGURE 10 • SECUREL Y assemble the LEG PRESS ADAPTER (1) to the BASE FRAME using one 3/8 X 3-3/4” BOL T (9), one previously removed 3/8 X 3-3/4” BOL T , two 3/8” W ASHERS (5), two previously removed 3/8” W ASHERS and two 3/8” LOCK NUTS (6) as shown in FIGURE 10.
12 FIGURE 12 STEP 12: • Carefully route the SHOR T LEG PRESS CABLE (2) around one 3-1/2” PULLEY (4) and SECUREL Y assemble the 3-1/2” PULLEY (4) to the BRACKET (from 100 LEG PRESS kit) using one 3/8 X 1-3/4” BOL T (7), one 3/8” W ASHER (5), one CABLE CLIP (1 1) and one 3/8” LOCK NUT (6) as shown in FIGURE 12.
13 FIGURE 14 STEP 14: • Carefully route the LEG PRESS CABLE (2) around one 3-1/2” PULLEY (4) and SECUREL Y assemble the 3-1/2” PULLEY (4) to the bracket on the SEA T FRAME using one 3/8 X 1-3/4” BOL T (7) and one 3/8” LOCK NUT (6) as shown in FIGURE 14.
FIGURE 15 STEP15: • Carefully route the SHOR T LEG PRESS CABLE (2) around one 3-1/2” PULLEY (4) and SECUREL Y assemble the 3-1/2” PULLEY (4) to the SEA T FRAME using one 3/8 X 4-1/2” BOL T (10), two 3/8” FLANGE SP ACERS (14), two 3/8 X 1” SP ACERS (13) and one 3/8” LOW HEIGHT LOCK NUT (12) as shown in FIGURE 15.
FIGURE 18 STEP 18: • Carefully route the SHOR T LEG PRESS CABLE (2) around one 3-1/2” PULLEY (4) and SECUREL Y assemble the 3-1/2” PULLEY (4) to the MAIN ARM using one 3/8 X 2-3/4” BOL T (8), two 3/8” FLANGE SP ACERS (14) and one 3/8” LOCK NUT (6) as shown in FIGURE 18.
FIGURE 19 STEP 19: 3/8 X 4-1/2” 10 2 12 13 SEA T FRAME 14 16 • SECUREL Y assemble the threaded end of the SHOR T LEG PRESS CABLE (2) to the SEA T FRAME using one 3/8 X 4-1/2” BOL T (10), two 3/8 X 1” SP ACERS (13), one previosly removed THREADED HOUSING , two 3/8” FLANGE SP ACERS (14) and one 3/8”LOW HEIGHT LOCK NUT (12).
FIGURE 20 STEP 20: • T o set the correct amount of tension in the cables, push the HEAD PLA TE down, insert the WEIGHT SELECT OR PIN and perform several repititions at the leg press station.This will relax the cable system and prevent the HEAD PLA TE from lifting up.
STEP 1: 0 1 2 34 5 6 1/2 1/2 1/2 1/2 1/2 1/2 • If the SECOND ST ACK OPTION has not been assembled to the 880, refer to the SECOND ST ACK OPTION USER’S GUIDE.
STEP 2: FIGURE 2 19 • Route the LONG LEG PRESS CABLE (3) around the 3-1/2” PULLEY on the PULLEY PLA TES using one existing 3/8 X 1-3/4” BOL T and one existing 3/8” LOCK NUT .
20 STEP 3: FIGURE 3 • Remove the two 3/8” BOL TS, 3/8” W ASHERS and 3/8” LOCK NUTS from the ST ACK BASE as shown in FIGURE 3. ST ACK BASE • SECUREL Y assemble the LEG PRESS ADAPTER (1) to the ST ACK BASE using the previously removed 3/8” BOL TS, 3/8” W ASHERS and 3/8” LOCK NUTS as shown in FIGURE 3.
21 0 1 2 34 5 6 1/2 1/2 1/2 1/2 1/2 1/2 FIGURE 5 STEP 5: • Carefully route the LONG LEG PRESS CABLE (3) around one 3-1/2” PULLEY (4) and SECUREL Y assemble the 3-1/2” PULLEY (4) to the BRACKET (.
22 FIGURE 7 STEP 7: • Carefully route the LONG LEG PRESS CABLE (3) around one 3-1/2” PULLEY (4) and SECUREL Y assemble the 3-1/2” PULLEY (4) to the bracket on the SEA T FRAME using one 3/8 X 1-3/4” BOL T (7) and one 3/8” LOCK NUT (6) as shown in FIGURE 7.
FIGURE 8 STEP 8: • Carefully route the LONG LEG PRESS CABLE (3) around one 3-1/2” PULLEY (4) and SECUREL Y assemble the 3-1/2” PULLEY (4) to the SEA T FRAME using one 3/8 X 4-1/2” BOL T (10), two 3/8” FLANGE SP ACERS (14), two 3/8 X 1” SP ACERS (13) and one 3/8” LOW HEIGHT LOCK NUT (12) as shown in FIGURE 8.
FIGURE 1 1 STEP 1 1: • Carefully route the LONG LEG PRESS CABLE (3) around one 3-1/2” PULLEY (4) and SECUREL Y assemble the 3-1/2” PULLEY (4) to the MAIN ARM using one 3/8 X 2-3/4” BOL T (8), two 3/8” FLANGE SP ACERS (14) and one 3/8” LOCK NUT (6) as shown in FIGURE 1 1.
FIGURE 12 STEP 12: 3/8 X 4-1/2” 10 3 12 13 SEA T FRAME 14 25 • SECUREL Y assemble the threaded end of the LONG LEG PRESS CABLE (3) to the SEA T FRAME using one 3/8 X 4-1/2” BOL T (10), two 3/8 X 1” SP ACERS (13), one previosly removed THREADED HOUSING , two 3/8” FLANGE SP ACERS (14) and one 3/8”LOW HEIGHT LOCK NUT (12).
26 STEP 13: • T o set the correct amount of tension in the cables, push the HEAD PLA TE down, insert the WEIGHT SELECT OR PIN and perform several repititions at the leg press station.This will relax the cable system and prevent the HEAD PLA TE from lifting up.
Een belangrijk punt na aankoop van elk apparaat ParaBody 881 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen ParaBody 881 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens ParaBody 881 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding ParaBody 881 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over ParaBody 881 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van ParaBody 881 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de ParaBody 881 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met ParaBody 881 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
