Gebruiksaanwijzing /service van het product 1068 van de fabrikant Patton electronic
Ga naar pagina of 27
USER MANUAL VLINK MODEM Model 1068 and 1058 SALES OFFICE (301) 975-1000 TECHNICAL SUPPOR T (301) 975-1007 P ar t# 07M1068-UM Doc# 05816U2-001 Rev . A Revised 10/17/06 An ISO-9001Cer tified Company.
2 CONTENTS 1.0 Warranty Information ................................................................. 4 1.1 Radio and TV Interference (FCC Part 15) .................................... 4 1.2 CE Declaration of Conformity ...............................
3 Terminal Block (1068DV/TB45 Only) ......................................... 24 C.3 POTS/ISDN Interface .................................................................. 24 RJ-45 ......................................................................
4 1.0 W ARRANTY INFORMATION P atton Electronics warrants all VLINK modem components to be free from def ects, and will—at our option—repair or replace the product should it f ail within one year from the first date of the shipment.
5 The saf ety advice in the documentation accompan ying this product shall be obey ed. The conf ormity to the above directiv e is indicated by the CE sign on the de vice. 1.3 SERVICE All warranty and non-w arranty repairs must be returned freight prepaid and insured to P atton Electronics.
6 2.0 GENERAL INFORMATION Thank you f or your purchase of this P atton Electronics product. This product has been thoroughly inspected and tested and is warranted f or one year f or par ts and labor .
7 • A vailable in r ack-mount or standalone configurations • Made in the USA 2.2 DESCRIPTION The P atton Electronics VLINK/CO and VLINK/CP VDSL modems provide high-speed LAN connections between peered Ethernet LANs, remote PCs, or an y other network enabled 10/100Base-T de vice.
8 3.0 INSTALLATION Because the VLINK modem requires no configuration, it can be installed quickly . If you are installing a standalone unit, ref er to section 3.1 “Standal- one unit installation”. Otherwise, ref er to section 3.2 “Rack card installation”.
9 3.2 RACK CARD INSTALLATION The VLINK modem rack card comprised a front card and a rear card.Do the f ollowing to install the cards into the rac k chassis: 1. Slide the rear card into the back of the chassis along the metal r ails. 2. Secure the rear card using the supplied metal screws .
10 6. Connect the Ether net interface (ref er to section 3.4, “Connecting the 10/100Base-T Ethernet Interface” on page 11). 3.3 CONNECTING THE T WISTED-PAIR LINE INTERFACE The VLINK modem suppor ts communication between two peer Ethernet LAN sites ov er a distance of up to 6,000 ft (1.
11 The terminal bloc k connector on the VLINK modem's twisted pair inter- f ace is polarity insensitive and is wired f or a two-wire interf ace. The signal/pin relationships is shown in Figure 5. Figure 5. VLINK modem (terminal block v ersion) twisted pair line interface (Model 1068D V/TB45) 3.
12 3.5 CONNECTING THE POTS/ISDN LINE The RJ-45 por t labeled “PO TS/ISDN” is the PO TS/ISDN interf ace . A tele- phone or an ISDN de vice ma y be connected to this port and carr ied ov er the VDSL line. The units do not need power f or the PO TS interf ace to work.
13 4.0 CONFIGURATION The Model 1068 VLINK modem has eight DIP switches f or configuring the unit f or a wide variety of applications. This section descr ibes switch locations and e xplains the diff erent configurations. No dip switch options are av ailable on the 1058.
14 Figure 9. Model 1068 standalone modem DIP switch orientation Figure 10. Model 1068 rack card DIP s witch orientation Power VLINK Modem Link QOL VLINK Link Activity Ethernet 1234 ON Push toggle to l.
15 4.2 CONFIGURING DIP SWITCH S1 DIP s witch S1 is where you configure the VDSL line rate, symmetric or asymmetric, Ethernet full auto negotiation capability (100Base-T full or half duple x, 10Base-T full or half duple x) or limited auto sense (only 100Base-T half duple x, 10Base-T full or half duple x).
16 T able 3: Model 1068 Asymmetric VDSL Line Rates Selection Chart S1-2 S1-3 S1-4 Asymmetric Line Rates DS/US * *. DS = downstream, US = upstream Note T ab le 3 only applies to Model 1068. OFF OFF ON 4.17 Mbps/1.56 Mbps OFF ON ON 9.38 Mbps/1.56 Mbps OFF ON OFF 16.
17 5.0 OPERATION Once the VLINK modems are properly installed, they should operate transparently . No user settings required. This section describes reading the LED status monitors. 5.1 POWER UP Bef ore applying power to the VLINK modem, please revie w section 3.
18 T able 5: F ront panel LED descr iption for standalone modem LED Description Po w e r On (green) when power is applied to the unit. Off when no power is applied to the unit. VLINK - Link On (green) when the end-to-end VDSL link between the units is established.
19 Figure 12. VLINK modem rack card front panel T able 6: Front panel LED description for r ack card modem LED Description P ower Solid GREEN to indicate the unit is powered on. VLINK modem Link (Active Green) Solid g reen (ON) to indicate that the end-to-end VDSL link betw een the VLINK modems is established.
20 APPENDIX A SPECIFICATIONS A.1 LAN CONNECTION • Unshielded RJ-45, 10/100Base-T , IEEE 802.3 Ethernet • VDSL Connection: RJ-45 and T erminal Block A.2 T RANSMISSION LINE T w o-wire unconditioned twisted pair. A.3 VDSL LINE RATE 16.67 Mbps (Model 1068 only) and 12.
21 External AC and DC options: • A C: 120 V A C , 220 V AC , and UI (120–240 V AC) • DC: 12 VDC, 24 VDC and 48 VDC A.8 T EMPERATURE RANGE 32–122°F (0–50°C) A.9 HUMIDITY Up to 90% non-condensing. A.10 DIMENSIONS 1.58H x 4.16W x 3.75D in. (10.
22 APPENDIX B MODEL 1068 SERIES F ACTOR Y REPLACEMENT P AR TS AND ACCESSOR IES P atton Model # Description Base Models 1068D VRC/CO CO V ariable Rate VDSL RC CO Rack Card; voice and data 1068D VRC/CP CP V ariable Rate VDSL CP Rack Card; voice and data 1058D VRC/CO CO Fix ed 12.
23 *Only required with optional UI power supply (08055DCUI) 48V -PSM 48 VDC Input Adapter P ower Cords* 0805US American P ower Cord 0805EUR European P ower Cord CEE 7 0805UK United Kingdom P ower Cord.
24 APPENDIX C VLINK SERIES INTERFACE PIN ASSIGNMENT C.1 10/100BASE-T INTERFACE RJ-45 • Pin 1: TX+/RX+ • Pin 2: TX-/RX- • Pin 3: RX+/TX+ • Pin 6: RX-/TX- • Pins 4, 5, 7, 8: no connection C.
25 APPENDIX D DISTANCE CHAR T, BASED ON 24 A WG (0.5 MM) Note DS/US = Downstream/Upstream. Symm Line Rate Distance in feet (km) 6.25 Mbps 4,500 (1.37) 9.38 Mbps 4,150 (1.26) * 12.5 Mbps *. This is the only option available for Model 1058. 4,000 (1.22) 16.
26 Notes _________________________________________________________ _________________________________________________________ _________________________________________________________ _________________.
27 Cop yright © 2006 P atton Electronics Company All Rights Reser ved..
Een belangrijk punt na aankoop van elk apparaat Patton electronic 1068 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Patton electronic 1068 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Patton electronic 1068 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Patton electronic 1068 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Patton electronic 1068 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Patton electronic 1068 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Patton electronic 1068 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Patton electronic 1068 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
