Gebruiksaanwijzing /service van het product 2085 van de fabrikant Patton electronic
Ga naar pagina of 20
USER MANUAL SALES OFFICE (301) 975-1000 TECHNICAL SUPPORT (301) 975-1007 http://www .patton.com Part# 07M2085-D Doc# 047033U, Rev . E Revised 1/22/08 MODEL 2085 High Speed RS-232 to RS-485 Interface C.
1.0 W ARRANTY INFORMA TION Patton Electronics warrants all Model 2085 components to be free from defects, and will—at our option—repair or replace the product should it fail within one year from the first date of shipment.
1.3 SERVICE All warranty and non-warranty repairs must be returned freight prepaid and insured to Patton Electronics. All returns must have a Return Materials Authorization number on the outside of the shipping container . This number may be obtained from Patton Electronics T echnical Service: (301) 975-1007, http://www .
2.0 GENERAL INFORMA TION Thank you for your purchase of this Patton Electronics product. This product has been thoroughly inspected and tested and is warranted for One Y ear parts and labor .
3.0 CONFIGURA TION The Model 2085 is configured using an eight position DIP switch and a DCE/DTE switch. Figure 1 (below) shows the location of the DCE/DTE switch (externally accessible) on the PC board, as well as the power supply daughter board and terminal block.
3.1 SETTING THE DCE/DTE SWITCH For your convenience, the Model 2085 has an externally accessible DCE/DTE switch. If the device connected to the Model 2085 is a modem or multiplexer (or is wired like one), set the switch to “DTE”. This setting causes the Model 2085 to behave like Data T erminal Equipment and transmit data on pin 2.
4.1.3 4-WIRE CONNECTION USING TERMINAL BLOCKS If your RS-485 application requires you to connect two pairs of bare wires to the Model 2085, you will need to open the case to access the terminal blocks.
S1-4: Echo Mode The setting for switch S1-4 determines whether the Model 2085 echoes data back to the transmitting device (half-duplex mode only). S1-4 Setting On Echo On Off Echo Off S1-5: Carrier Control Method The setting for switch S1-5 determines whether the carrier is “Constantly On” or “Controlled by RTS”.
3.4 CONFIGURA TION SWITCH APPLICA TIONS The switch settings generally needed to configure the Model 2085 for various applications are shown in the table below . Note: Do not change switch settings until you have carefully read Section 3.3. 8 S1-1: “Xmt Off” Imp.
3.4 CONFIGURA TION SWITCH APPLICA TIONS The switch settings generally needed to configure the Model 2085 for various applications are shown in the table below . Note: Do not change switch settings until you have carefully read Section 3.3. 8 S1-1: “Xmt Off” Imp.
S1-4: Echo Mode The setting for switch S1-4 determines whether the Model 2085 echoes data back to the transmitting device (half-duplex mode only). S1-4 Setting On Echo On Off Echo Off S1-5: Carrier Control Method The setting for switch S1-5 determines whether the carrier is “Constantly On” or “Controlled by RTS”.
4.1.3 4-WIRE CONNECTION USING TERMINAL BLOCKS If your RS-485 application requires you to connect two pairs of bare wires to the Model 2085, you will need to open the case to access the terminal blocks.
3.1 SETTING THE DCE/DTE SWITCH For your convenience, the Model 2085 has an externally accessible DCE/DTE switch. If the device connected to the Model 2085 is a modem or multiplexer (or is wired like one), set the switch to “DTE”. This setting causes the Model 2085 to behave like Data T erminal Equipment and transmit data on pin 2.
3.0 CONFIGURA TION The Model 2085 is configured using an eight position DIP switch and a DCE/DTE switch. Figure 1 (below) shows the location of the DCE/DTE switch (externally accessible) on the PC board, as well as the power supply daughter board and terminal block.
2.0 GENERAL INFORMA TION Thank you for your purchase of this Patton Electronics product. This product has been thoroughly inspected and tested and is warranted for One Y ear parts and labor .
1.3 SERVICE All warranty and non-warranty repairs must be returned freight prepaid and insured to Patton Electronics. All returns must have a Return Materials Authorization number on the outside of the shipping container . This number may be obtained from Patton Electronics T echnical Service: (301) 975-1007, http://www .
1.0 W ARRANTY INFORMA TION Patton Electronics warrants all Model 2085 components to be free from defects, and will—at our option—repair or replace the product should it fail within one year from the first date of shipment.
APPENDIX B P A TTON MODEL 2085 RS-232 PIN CONFIGURA TIONS Copyright © Patton Electronics Company 1- (FG) Frame Ground 2- (TD) Transmit Data T o Model 2085 3- (RD) Receive Data From Model 2085 4- (RTS.
APPENDIX B P A TTON MODEL 2085 RS-232 PIN CONFIGURA TIONS Copyright © Patton Electronics Company 1- (FG) Frame Ground 2- (TD) Transmit Data T o Model 2085 3- (RD) Receive Data From Model 2085 4- (RTS.
USER MANUAL SALES OFFICE (301) 975-1000 TECHNICAL SUPPORT (301) 975-1007 http://www .patton.com Part# 07M2085-D Doc# 047033UD, Rev . E Revised 1/22/08 MODEL 2085 High Speed RS-232 to RS-485 Interface .
Een belangrijk punt na aankoop van elk apparaat Patton electronic 2085 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Patton electronic 2085 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Patton electronic 2085 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Patton electronic 2085 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Patton electronic 2085 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Patton electronic 2085 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Patton electronic 2085 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Patton electronic 2085 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
