Gebruiksaanwijzing /service van het product 2158 van de fabrikant Patton electronic
Ga naar pagina of 28
USER MANUAL CopperLink™ Ether net Extenders Model 2158 & 2168 P ar t# 07M2158_2168 Rev . A Doc# 058091U Revised 3/24/03 An ISO-9001Cer tified Company.
2 CONTENTS 1.0 Warranty Information ................................................................. 4 1.1 Radio and TV Interference ............................................................ 4 1.2 CE Notice ........................................
3 D CopperLink Series Interface Pin Assignment ........................ 25 D.1 10/100Base-T Interface .............................................................. 25 RJ-45 .............................................................................
4 1.0 W ARRANTY INFORMATION P atton Electronics warrants all CopperLink Ethernet Extender compo- nents to be free from def ects, and will—at our option—repair or replace the product should it f ail within one year from the first date of the ship- ment.
5 1.3 SERVICE All warranty and non-w arranty repairs must be returned freight prepaid and insured to P atton Electronics. All retur ns must ha ve a Return Materi- als A uthorization number on the outside of the shipping container .
6 2.0 GENERAL INFORMATION Thank you f or y our purchase of this P atton Electronics product. This product has been thoroughly inspected and tested and is warranted f or one year f or parts and labor. If any questions or prob lems arise dur ing installation or use of this product, contact P atton Electronics T echnical Suppor t at +1 (301) 975-1007.
7 passing pack ets across the CopperLink link that are meant f or the remote peered LAN. Figure 1. T ypical application The CopperLink/L modem and CopperLink/R modem work together to create a transparent e xtension between two peered Ethernet LANs. Figure 1 shows a typical point-to-point application.
8 3.0 INSTALLATION Because the CopperLink Ethernet Extender requires no configuration, it can be installed quickly . If you are installing a standalone unit, ref er to section 3.1 “Standalone unit installation”. Otherwise, refer to section 3.2 “Rac k card installation”.
9 3.2 RACK CARD INSTALLATION The CopperLink Ethernet Extender rack card comprised a front card and a rear card.Do the f ollowing to install the cards into the rac k chassis: 1. Slide the rear card into the back of the chassis along the metal r ails. 2.
10 6. Connect the Ether net interf ace (ref er to section 3.4, “Connecting the 10/100Base-T Ethernet Interface” on page 11). 3.3 CONNECTING THE T WISTED-PAIR LINE INTERFACE The CopperLink Ethernet Extender suppor ts communication betw een two peer Ethernet LAN sites over a distance of up to 6,000 ft (1.
11 The terminal bloc k connector on the CopperLink Ethernet Extender's twisted pair interf ace is polarity insensitive and is wired f or a two-wire interf ace. The signal/pin relationships is shown in Figure 5. Figure 5. CopperLink Ethernet Extender twisted pair line interface.
12 Connecting the 10/100Base-T Ethernet P ort to a Hub The CopperLink Ethernet Extender 10/100Base-T interface is configured as DTE (Data T erminal Equipment), just like a 10/100Base-T network interf ace card in a PC. Theref ore, it “e xpects” to connect to a 10/100Base-T Hub using a straight-through RJ-45 cab le.
13 DC power (supplied via the po wer supply jac k to the CopperLink Ether- net Extender) must meet the f ollowing requirements; DC power supplied must be regulated +5VDC ±5%, 1.0A minimum. Center pin is +5V . The barrel type plug has a 2.5/5.5/10mm I.
14 4.0 CONFIGURATION (MODEL 2168 ONLY) The CopperLink Ethernet Extender has eight DIP switches f or configur- ing the unit f or a wide variety of applications.
15 Figure 10. Model 2168 standalone modem DIP switch orientation Figure 11. Model 2168 rack card DIP s witch orientation.
16 4.2 CONFIGURING DIP SWITCH S1 DIP s witch S1 is where you configure the CopperLink line rate , symmet- ric or asymmetr ic, Ethernet full auto negotiation capability (100Base-T full or half duple x, 10Base-T full or half duplex) or limited auto sense (only 100Base-T half duple x, 10Base-T full or half duplex).
17 T able 3: Asymmetric CopperLink Line Rates Selection Char t S1-2 S1-3 S1-4 Asymmetric Line Rates DS/US OFF OFF ON 4.17 Mbps/1.56 Mbps (Mode 0) OFF ON ON 9.
18 5.0 OPERATION Once the CopperLink Ethernet Extenders are proper ly installed, they should operate transparently . No user settings required. This section describes reading the LED status monitors. 5.1 POWER UP Bef ore applying power to the CopperLink Ethernet Extender , please re view section 3.
19 T able 5: F ront panel LED description for standalone modem LED Description Po w e r On (green) when power is applied to the unit. Off when no power is applied to the unit. CopperLink - Link On (green) when the end-to-end CopperLink link between the units is estab lished.
20 Figure 13. CopperLink Ethernet Extender rack card front panel T able 6: F ront panel LED description f or rack card modem LED Description P o wer Solid GREEN to indicate the unit is powered on.
21 APPENDIX A SPECIFICATIONS A.1 LAN CONNECTION • Shielded RJ-45, 10/100Base-T , IEEE 802.3 Ether net • CopperLink Connection: RJ-45 and T erminal Block A.2 T RANSMISSION LINE T wo-wire unconditioned twisted pair. A.3 COPPERLINK LINE RATE Model 2168 —16.
22 A.8 T EMPERATURE RANGE 32–122°F (0–50°C) A.9 HUMIDITY Up to 90% non-condensing. A.10 DIMENSIONS 1.58H x 4.16W x 3.75D in. (10.6H x 4.1W x 8.8D cm).
23 APPENDIX B MODEL 2158 SERIES F ACTORY REPLACEMENT P AR TS AND ACCESSORIES *Only required with optional UI power supply (08055DCUI) P atton Model # Description Base Models 2158/L Local CopperLink Et.
24 APPENDIX C MODEL 2168 SERIES F ACTORY REPLACEMENT P AR TS AND ACCESSORIES *Only required with optional UI power supply (08055DCUI) P atton Model # Description Base Models 2168RC/L Local Multi Rate .
25 APPENDIX D COPPERLINK SERIES INTERFACE PIN ASSIGNMENT D.1 10/100BASE-T INTERFACE RJ-45 • Pin 1: TX+ • Pin 2: TX- • Pin 3: RX+ • Pin 6: RX- • Pins 4, 5, 7, 8: no connection D.2 COPPERLINK INTERFACE RJ-45 • Pin 4: RING • Pin 5: TIP • Pins 1, 2, 3, 6, 7, 8: no connection T erminal Block See Figure 5 on page 11.
26 APPENDIX E DISTANCE CHAR T, BASED ON 24 A WG (0.5 MM) Note Model 2158 is fixed at 12.5 Mbps , 4,000 ft (1,220 m). Symm Line Rate (DS/US) Distance in feet (km) 6.25 Mbps 4,500 (1.37) 9.38 Mbps 4,150 (1.26) 12.5 Mbps 4,000 (1.22) 16.67 Mbps 3,300 (1.
27 Notes _________________________________________________________ _________________________________________________________ _________________________________________________________ _________________.
28 Notes _________________________________________________________ _________________________________________________________ _________________________________________________________ _________________.
Een belangrijk punt na aankoop van elk apparaat Patton electronic 2158 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Patton electronic 2158 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Patton electronic 2158 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Patton electronic 2158 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Patton electronic 2158 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Patton electronic 2158 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Patton electronic 2158 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Patton electronic 2158 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
