Gebruiksaanwijzing /service van het product FR8304 van de fabrikant Pelco
Ga naar pagina of 24
INST ALLA TION FT8304/FR8304 Fiber T ransmitter and Receiver Four -Channel Digitally Encoded V ideo C1644M-B (6/06).
.
C1644M-B (6/06) 3 Contents Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Regulatory Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4 C1644M-B (6/06) Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings.
C1644M-B (6/06) 5 The product and/or manual may bear the following marks: This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit. This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit.
6 C1644M-B (6/06) Regulatory Notices This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
C1644M-B (6/06) 7 Product Overview DESCRIPTION The FT8304/FR8304 fi ber transmitter and receiver provide the ability to transmit up to four composite video channels over one optical fi ber (refer to Figure 1).
8 C1644M-B (6/06) MODELS The FT8304/FR8304 fi ber transmitter and receiver consist of the following series of models: Multimode Models: * FT8304MSTR Four -channel fi ber optic video transmitter; mul.
C1644M-B (6/06) 9 FRONT PANEL The front panel of the FT8304 transmitter and the FR8304 receiver provides LED indicators that allow you to monitor signal status, laser status (transmitter only), and operating power . The following sections provide a view of the front panel of the FT8304 transmitter and the FR8304 receiver .
10 C1644M-B (6/06) FRONT PANEL - FR8304 RECEIVER Figure 3 illustrates the front panel of the FR8304 receiver. Figure 3. Front Panel of FR8304 Receiver For detailed information about the front-panel indicators, refer to the T roubleshooting section.
C1644M-B (6/06) 11 REAR PANEL All connections to the FT8304 transmitter and the FR8304 receiver are made to the rear panel of the modules (refer to Figure 4). Figure 4. Rear Panel of FT8304 T ransmitter and FR8304 Receiver For additional information about rear-panel connections, refer to the Installation section.
12 C1644M-B (6/06) Installation PACKAGE CONTENTS The following items are supplied: 1 FT8304 transmitter or FR8304 receiver 1 Regulated switching power supply with four plug adapters (North American, Australian, U.K., and European configurations); 100-240 VAC, 50-60 Hz input, 12 VDC output 1W all clip with two 4-40 x 0.
C1644M-B (6/06) 13 MOUNTING THE T RANSMITTER/RECEIVER TO A W ALL The FT8304 transmitter/FR8304 receiver can be mounted to a wall in the following ways: • Using the supplied wall clip for attachment of a single module to a wall. For installation instructions, refer to the Mounting the T ransmitter/Receiver Using the W all Clip section.
14 C1644M-B (6/06) Figure 5. Mounting the FT8304 T ransmitter/FR8304 Receiver Using the Wall Clip WA LL CLIP LOWER FLANGE SCREW , PHILLIPS P AN HEAD WITH LOCK W ASHER (2) HORIZONT AL MOUNTING HOLE (2).
C1644M-B (6/06) 15 CONNECTIONS Connections to the FT8304 transmitter and the FR8304 receiver are made on the rear panel of the modules and consist of the following: • Power connection NOTES: – A 12 VDC or 24 VAC power supply can be used to power the transmitter/receiver when used as a stand-alone module.
16 C1644M-B (6/06) T roubleshooting LED indicators on the front panel of the FT8304 transmitter/FR8304 receiver (refer to Figure 2 and to Figure 3, respectively) allow you to monitor signal status , laser status (transmitter only), a nd operating power .
C1644M-B (6/06) 17 Video Present LED (Continued) Red on receiver Incoming video signal is not present on the channel. Optical signal is not being received from the trans- mitter . Optic Fault LED is also red. Refer to the Optic Fault LED - Receiver section in this table.
18 C1644M-B (6/06) Optic Fault LED - Receiver Green The optical signal is being received from the transmitter . — No action required. Red The optical signal is not being received from the transmitter . T ransmitter is not powered on. Check power connections.
C1644M-B (6/06) 19 Specifications VIDEO Number of Channels 4 Modulation T ype Pulse code modulation, 8-bit resolution Video Input (FT8304)/ 1.0 Vp-p, 75 ohms; NTSC, PAL, and SECAM Video Output (FR8304) Bandwidth 6.5 MHz Gain Unity Crosstalk -50 dB typical at 3.
20 C1644M-B (6/06) OPTICAL POWER BUDGET , TRANSMISSION DISTANCE, AND LASER CLASS 1 LIMIT Model No. Wavelength Optical Power Budget Maximum T ransmission Distance Laser Class 1 Limit* T ransmitter Compatible Receiver Multimode (62.5/125 µm) FT8304MSTR FR8304MSTR 1310 nm 20 dB † 2 km (1.
C1644M-B (6/06) 21 This equipment contains electrical or electronic components that must be recycled properly to comply with Directive 2002/96/EC of the European Union regarding the disposal of waste electrical and electronic equipment (WEEE). Contact your local dealer for procedures for recycling this equipment.
.
PRODUCT WARRANTY AND RETURN INFORMATION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment.
Worldwide Headquarters 3500 Pelco Way Clovis, California 93612 USA USA & Canada T el: 800/289-9100 Fax: 800/289-9150 International T el: 1-559/292-1981 Fax: 1-559/348-1120 www.
Een belangrijk punt na aankoop van elk apparaat Pelco FR8304 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Pelco FR8304 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Pelco FR8304 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Pelco FR8304 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Pelco FR8304 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Pelco FR8304 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Pelco FR8304 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Pelco FR8304 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
