Gebruiksaanwijzing /service van het product MCC1380H-6 van de fabrikant Pelco
Ga naar pagina of 16
CCC1380H-6, CCC1380H-6X, and MCC1380H-6 C1963M (8/04) ® INST ALLA TION/OPERA TION 1/3-Inch CCD Camera.
2 C1963M (8/04) CONTENTS Section Page IMPORT ANT SAFETY INSTRUCTIONS ............................................................................................... 3 REGULA TORY NOTICES ................................................................
C1963M (8/04) 3 This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit. This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit.
4 C1963M (8/04) REGULA TORY NOTICES This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
C1963M (8/04) 5 DESCRIPTION The CCC1380H-6, CCC1380H-6X, and MCC1380H-6 digital cameras are high resolution, compact video cameras that feature a 1/3-inch CCD imager . Each camera’ s high resolution and high-density image sensor ensure a sharp and clear picture over a wide range of conditions.
6 C1963M (8/04) LOCA TION AND FUNCTION OF P ARTS Lens Mount The camera has a standard CS lens mount but can use a C-mount lens when a C/CS-mount adapter is installed between the lens and camera. Back Focus Lock Screw Loosen the locking screw to adjust the back focus.
C1963M (8/04) 7 Eclipser Level Controls The eclipser function is set at the factory and usually does not need to be readjusted. However , if adjustment is necessary , refer to the section on Eclipser Adjustment in this manual. THRE Sets the level for the brightest part of the picture.
8 C1963M (8/04) A WB – Automatic White Balance Following are the AWB switch settings: OFF – Processes the viewed image to retain color balance in a restricted color temperature range. ON (Default setting) – Automatically processes the viewed image to retain color balance over a wide color temperature range.
C1963M (8/04) 9 CONNECTIONS POWER To connect to the power supply: 1. Strip at least .50 inch (13 mm) from the power cord to expose the wires. 2. Insert the three wires into the holes in the terminal strip until they snap into place. 3. Confirm that the cord is connected to terminal securely by lightly tugging on the cord.
10 C1963M (8/04) LENS INST ALLA TION The CCC1380H-6, CCC1380H-6X, and MCC1380H-6 can use fixed, manual, or passive (DC- controlled) auto iris lenses. The camera has a standard CS lens mount but can use a C-mount lens when a C/CS-mount adapter is installed between lens and camera.
C1963M (8/04) 11 BACK FOCUS ADJUSTMENT Do not release the back focus locking ring unnecessarily . Back focus adjustment has been set at the factory to the standard CS-mount back focus distance. However , once a lens is mounted it may be necessary to adjust back focal length to match the lens being used.
12 C1963M (8/04) CAMERA SYNCHRONIZA TION The power supply of each camera is set to the same synchronized phase at the factory and usually does not need to be readjusted. When using more than one camera power supply , a brief vertical roll may occur on the monitor each time a camera view is switched.
C1963M (8/04) 13 ECLIPSER ADJUSTMENT The eclipser function is set at the factory and usually does not need to be readjusted. However , if fine tuning is necessary , do the following: 1. Set the DIP switches. a. AGC: OFF b. ESC: OFF c. BLC: OFF 2. Set the variable resistors and Eclipse DIP switch.
14 C1963M (8/04) SPECIFICA TIONS GENERAL Imaging Device 1/3-inch interline transfer CCD Picture Elements CCC1380H-6, MCC1380H-6 768H x 494V (approx. 380K) CCC1380H-6X 752H x 582V (approx.
C1963M (8/04) 15 PRODUCT W ARRANTY AND RETURN INFORMA TION W ARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment.
Worldwide Headquarters 3500 Pelco Way Clovis, California 93612 USA USA & Canada Tel: 800/289-9100 Fax: 800/289-9150 International Tel: 1-559/292-1981 Fax: 1-559/348-1120 www.
Een belangrijk punt na aankoop van elk apparaat Pelco MCC1380H-6 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Pelco MCC1380H-6 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Pelco MCC1380H-6 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Pelco MCC1380H-6 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Pelco MCC1380H-6 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Pelco MCC1380H-6 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Pelco MCC1380H-6 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Pelco MCC1380H-6 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
