Gebruiksaanwijzing /service van het product 645N2 van de fabrikant Pentax
Ga naar pagina of 98
OPERA TING MANUAL 645N II-cover 01.11.8 11:34 AM ページ1.
Welcome to the Fantastic W orld of Pentax Autofocus Multi-Mode Medium Format Photography The Pentax 645 N 2 , our latest development in the area of the medium format SLR, promises a superior 6 x 4.
T ABLE OF CONTENTS 1 LCD panel indication ..............................................3 Viewfinder indication ..............................................3 Names of working parts .....................................4, 5 Safe use of your camera...
2 III. ADV ANCED OPERA TION ......................38 - 83 Selecting a Drive Mode ........................................38 • Consecutive - Frame Mode ...........................38 • Self-T imer Mode ............................................39 T aking multi-exposure pictures .
LCD P ANEL INDICA TION VIEWFINDER INDICA TION 3 : Frame Counter (p.22) : Film Speed Information (p.24) ISO : Film Status Information (p.24) : Battery Exhaustion W arning (p.
NAMES OF WORKING P ARTS 4 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 q AF mode selector (p.33, 58) w Exposure compensation dial (p.52) e Exposure compensation dial release button (p.52) r Auto bracketing selector (p.53) t Hotshoe (p.68) y Shutter speed dial release button u Lens information contacts i Lens unlock button (p.
NAMES OF WORKING P ARTS 5 @1 Battery holder release knob @2 External power supply socket (p.13) @3 T ripod socket (p.35) @4 V ertical tripod socket (p.35) @5 Multi-exposure switch (p.40) @6 X-sync socket @7 Strap lug (p.1 1) @8 Film holder (p.18) @9 Film holder release knob (p.
FOR SAFE USE OF YOUR CAMERA 6 Although we have carefully designed this camera for safe operation, please be sure to follow precautions given on this page. W ARNING This mark indicates precautions that, if not followed, could result in serious injury to the operator .
PRECAUTIONS FOR YOUR CAMERA 7 Y our Pentax camera is a high-precision mecha- nism. Handle it with great care. Precautions when taking pictures • Do not use the camera where it may come in contact with rain, water , or any other liquid, because the cam- era is not weather , water , or liquid resistant.
8 Other precautions • The temperature range at which this camera func- tions properly is 50 ° C to -10 ° C (122 ° F to 14 ° F). • A camera which has been submerged in water usu- ally cannot be repaired. If such an accident should occur , it is advisable to contact a Pentax Service Center immediately .
PRECAUTIONS FOR BA TTER Y USAGE 9 • Use six 1.5V AA size alkaline, or lithium batteries. • Misuse of the battery can cause hazards such as leakage, overheating, explosion, etc. The battery should be inserted with the “ + ” and “ - ” sides facing correctly .
10 Icon indicators used in this manual Operation direction Attention Lamp blinking I. BASIC OPERA TION (PREP ARA TION) 645N II-body 01.11.8 11:42 AM ページ10.
A TT ACHING THE CAMERA STRAP 11 BASIC OPERA TION (PREP ARA TION) 1. Using a coin or similar object slide the clasp in the direction of the arrow . 2. Put the clasp onto the strap lug of the camera with the arrow indication facing out, and slide the lock plate back to the original position.
LOADING THE BA TTERIES 12 BASIC OPERA TION (PREP ARA TION) 123 1. T o remove the battery holder , lift the battery holder release knob and turn it in the direc- tion of the arrow . 2. Load six 1.5V AA-size batteries in the battery holder in accordance with the diagram locat- ed in the battery holder .
13 BASIC OPERA TION (PREP ARA TION) • This camera requires battery power for operation. Always use six 1.5V AA size batteries. • The ISO film speed and number of exposed frames are unchanged if the batteries are replaced. • Keep spare batteries on hand when shooting out doors or while traveling.
TURNING THE POWER ON 14 BASIC OPERA TION (PREP ARA TION) 12 1. Set the main switch to [ ON ] • When the camera is not in use, make sure that the main switch is OFF to prevent battery drain if the shutter release button is accidentally depressed.
15 BASIC OPERA TION (PREP ARA TION) * Low Battery W arning When the batteries are nearly exhausted, the bat- tery symbol [ ] appears on the LCD panel as a warning.
A TT ACHING THE LENS 16 BASIC OPERA TION (PREP ARA TION) 12 1. Remove the body mount cap while depress- ing the lens unlock button. 2. Align the red dots on the camera and lens mount, attach the lens to the camera body , and turn it fully to the right until you hear a click.
* 17 BASIC OPERA TION (PREP ARA TION) 3 3. T o remove the front lens cap, squeeze the tabs on both sides in the direction of the arrow . • With a non-autofocus lens attached, all available functions in this camera operate except autofocus operation.
A TT ACHING/DET ACHING FILM HOLDER 645 18 BASIC OPERA TION (PREP ARA TION) 12 Detaching 1. Raise the film holder knob and turn until the red dot markings align and a click is heard. Continue to turn the film holder knob to the end of the red line; the locking mechanism will release and the film holder is now detached from the camera body .
19 BASIC OPERA TION (PREP ARA TION) • When inserting the film holder into the camera body , be sure that the film holder is inserted the right way up in order to avoid any serious damage. • The same precaution is required when attaching the 220 film holder .
PRESSING THE SHUTTER RELEASE BUTTON LOADING FILM 20 BASIC OPERA TION (PREP ARA TION) The shutter release button has two positions. Pressing it down halfway (first position) turns on the exposure meter and autofocus system. Pressing it fully (second position) releases the shutter .
21 BASIC OPERA TION (PREP ARA TION) 12 34 1. Install the emptied spool to the spool retainer as illustrated. 2. T ear off the tape and install the spool to the film holder so that the black inner side of the leading must face outwards. 3. Draw the leader from the film roll, and insert the leader paper tip into the take-up spool ’ s slit.
7. Set the main switch to [ON]. Release the shut- ter . The film automatically advances to the first frame. [ ] is displayed on the LCD panel. 8. If the [ ] appears, indicating that the film is not properly loaded. Detach the film holder from the camera and load the film once again.
23 • Always load or unload a film in the shade or by using your body to shade the film holder . • We suggest that you first operate the camera with- out film to become familiar with its operations. • The film counter indication advances one each time the shutter is released.
SETTING THE FILM SPEED (ISO) 24 BASIC OPERA TION (PREP ARA TION) 123 1. Set the exposure compensation dial to the ISO position. • T urn the exposure compensation dial while holding down the exposure compensation dial release button. • The shutter cannot be released with the exposure com- pensation dial set at [ ISO ].
UNLOADING FILM 25 BASIC OPERA TION (PREP ARA TION) 123 1. After the last frame of the roll is exposed, the camera will automatically wind the film and stops winding as soon as the back of the leader paper is wound to the take-up spool. [ ] on the LCD panel is displayed.
UNLOADING THE FILM IN MID-ROLL 26 BASIC OPERA TION (PREP ARA TION) 4 12 3 If you wish to remove the film before exposing all the frames, use this function. 1. Set the main switch to [ ON ]. 2. Press the mid-roll wind-up button fully with a fine-pointed object.
INST ALLING THE EYECUP 27 BASIC OPERA TION (PREP ARA TION) 123 T wo types of eyecups, a standard and a larger are provided as accessories; they may be utilized according to a given situation. The larger is con- structed of rubber and designed to fit close to the face for easy shooting.
ADJUSTING THE VIEWFINDER DIOPTER 28 BASIC OPERA TION (PREP ARA TION) Aim the camera at a bright subject. While look- ing through the viewfinder , turn the diopter adjustment ring to the left or right until the aut- ofocus frame [ ] appears in the sharpest focus.
29 BASIC OPERA TION (SHOOTING) II. BASIC OPERA TION (SHOOTING) 645N II-body 01.11.8 11:42 AM ページ29.
USING THE PROGRAMMED AE MODE 30 BASIC OPERA TION (SHOOTING) 12 Purpose For easy picture taking, use this mode. In the Programmed AE mode, the camera automatically selects the best combination of aperture and shutter speed setting allowing you to take pictures by simply pressing the shut- ter release button.
USING THE MUL TI(6)-SEGMENT METERING MODE 31 BASIC OPERA TION (SHOOTING) In the multi(6)-segment metering mode, the meter- ing system automatically measures light in six dif- ferent zones, enabling proper exposure value in a wide variety of normal and adverse lighting condi- tions.
USING AUT OFOCUS MODE 32 BASIC OPERA TION (SHOOTING) With the Pentax 645 F A lens attached, the lens automatically focuses when you press the shutter release button halfway down. Set the lens in the autofocus mode. • Switching between the autofous mode and manu- al focus mode depends on the lens you use.
USING THE SINGLE AF MODE 33 When you depress the shutter button, the lens auto- matically focuses. As soon as the subject is in focus, the shutter is released. For normal use, select this position. The shutter cannot be released if the subject is out of focus.
USING THE 3-POINT AF MODE USING THE SINGLE-FRAME DRIVE MODE 34 BASIC OPERA TION (SHOOTING) In the 3-point autofocus system, the subject will be focused properly even if the main subject is slightly off-center of the AF frame. Set the AF mode selector to [ ].
HOLDING THE CAMERA 35 BASIC OPERA TION (SHOOTING) For best results, be sure to hold the camera correctly as shown in the illustrations. Hold the camera firmly , with your left hand supporting the camera and lens as shown in the illustrations. While tak- ing a picture, hold your breath and gently depress the shutter release button.
T AKING A PICTURE 36 BASIC OPERA TION (SHOOTING) Set the lent to the autofocus position. 1. Focus on the subject with the 3-point AF frame [ ]. When the shutter release button is pressed halfway down, the lens automatically focuses. 2. When the subject is in focus, the focus indi- cator [ ] lights up.
37 • The shutter cannot be released if the subject is out of focus. • The film counter indication advances each time the shutter is released. • Depress the shutter release button halfway down. While [ ] is on, the camera-to-subject distance is fixed (focus lock).
SELECTING A DRIVE MODE 38 ADV ANCED OPERA TIONS 3 . ADV ANCED OPERA TIONS Consecutive-Frame Mode Consecutive pictures can be taken by holding down the shutter release button. Set the drive mode selector to [ ]. • If the AF mode selector is set to [ S ], the camera focuses only the first picture.
39 ADV ANCED OPERA TIONS Self-Timer Mode The self-timer mode delays the shutter release, and is useful for taking group shots that include the pho- tographer . The shutter will be released about 12 seconds after the shutter release is pressed. 1. Set the drive mode selector to [ ].
MUL TIPLE EXPOSURE MODE 40 ADV ANCED OPERA TIONS 3 12 Procedure 1. T urn the multi-exposure switch in the direc- tion of the arrow until it locks. 2. The frame counter on the LCD panel blinks. 3. Press the shutter release button to shoot an initial exposure.
41 ADV ANCED OPERA TIONS 45 4. Return the multi-exposure switch to the origi- nal position to cancel the multi-exposure mode. Notes: • T o exposure the third shot, leave the multi-expo- sure switch in the lock position in step 3 to shoot the second shot.
SELECTING AN EXPOSURE MODE 42 ADV ANCED OPERA TIONS 123 Using the Programmed AE Mode Purpose The camera automatically selects the optimum combination of shutter speed and aperture setting, making it easy to take a good photograph by just depressing the shutter release button.
43 ADV ANCED OPERA TIONS * Exposure W arning If the subject is too bright or too dark, the shutter speed and aperture setting will blink in the viewfind- er . If the subject is too bright, select a darker sub- ject. Use a flash if the subject is too dark.
44 ADV ANCED OPERA TIONS 2 1 Using the Aperture-Priority AE Mode Purpose When the desired aperture is selected, an appropri- ate shutter speed is automatically set by the cam- era for a proper exposure. This mode is ideal for shooting landscapes with increased depth of field, or a portrait against a blurred background.
45 ADV ANCED OPERA TIONS 34* 3. Set the desired f-stop. 4. The f-stop that you have selected and appro- priate aperture indication determined by the camera can be seen in the viewfinder when the shutter release button is depressed halfway . • The approximate aperture indication appears in the viewfinder .
46 ADV ANCED OPERA TIONS 12 Using the Shutter-Priority AE Mode Purpose When the desired shutter speed is selected, the appropriate aperture is automatically set by the camera for a proper exposure according to the brightness of the subject.
47 ADV ANCED OPERA TIONS 3* 4. The shutter speed dial between 1/1000 to 4S can be set to 1/2 step by pressing the up/down button. The set shutter speed will be displayed on the LCD panel and in the viewfinder . • If the shutter speed does not change to 1/2 step, confirm Pentax Function No.
48 ADV ANCED OPERA TIONS 12 Using the Metered Manual Mode Purpose The Metered Manual Mode is a convenient expo- sure mode for taking pictures using the same shut- ter speed and aperture setting combination, or tak- ing creatively under or overexposured photographs.
49 ADV ANCED OPERA TIONS 45 * 4. T urn either the shutter dial or lens aperture ring until a single bar is displayed in the center of the bar graph. 5. When the shutter release button is depressed halfway , the shutter speed, approximate aperture and bar graph will be displayed in the viewfinder .
50 ADV ANCED OPERA TIONS 123 Using the Bulb Exposure Mode Purpose This mode is useful for the long exposures required for shooting night scenes and fireworks.
51 ADV ANCED OPERA TIONS 4 4. Adjust the desired aperture by lens aperture ring. • When using this mode, use a steady tripod to pre- vent camera shake and attach the optional “ Cable Switch CS-105, CS-130 ” or Release T imer Switch TS-1 10 after removing the Release Socket Cap.
ABOUT EXPOSURE COMPENSA TION 52 ADV ANCED OPERA TIONS 12 Purpose The exposure compensation allows you to deliberately overexposure (brighten) or underexposure (darken) a subject, or to compensate for difficult lighting conditions which may fool the camera ’ s built-in exposure meter .
AUT O BRACKETING EXPOSURE MODE 53 ADV ANCED OPERA TIONS 12 When you take a picture that requires exposure compen- sation and it may be difficult to determine the correct exposure, use this mode to make three different bracket- ed exposures with different exposure levels.
54 1. Set the auto bracketing selector to the desired exposure compensation value. 2. Press the shutter release button fully . Three pic- tures are taken consecutively according to the auto-bracketing switch you have set. • Three pictures are taken consecutively as follows.
SWITCHING THE METERING MODE 55 ADV ANCED OPERA TIONS The Spot metering or center weighted metering mode can also be selected in this camera. Select the desired metering mode with the metering mode selector .
56 ADV ANCED OPERA TIONS 12 Using the Spot Metering Mode The Spot Metering Mode measures light only in the small area in the center of the viewfinder . T o set 1. Set the metering mode selector to [ ]. 2. Measure the small area of the viewfinder as illustrated.
USING AE LOCK 57 ADV ANCED OPERA TIONS The AE lock function enables an exposure level to be memorized before shooting. The AE lock func- tion is very effective when used along with spot metering. Use the AE lock function to get a correct exposure when the subject occupies only a small part of the viewfinder .
SETTING THE FOCUS MODE SWITCH T O THE CONTINUOUS POSITION 58 ADV ANCED OPERA TIONS If the shutter release button is held at the halfway position, the lens focuses continuously to follow the subject. The shutter can be released even if the subject is out of focus.
USING THE SPOT AF MODE 59 ADV ANCED OPERA TIONS 12 Select the Spot AF Mode to critically focus on a specific spot of the subject which is in the spot AF autofocus frame. How to focus 1. Set the AF frame selector to [ ]. 2. Focus on the main subject with the Sopt AF frame.
FOCUS LOCK FUNCTION 60 ADV ANCED OPERA TIONS 13 2 In the Spot Metering Mode, the camera focuses with the spot metering / focusing area of the viewfinder . If you shoot without positioning the spot metering / focusing area on the main subject, the main subject will not be focused properly .
MANUAL FOCUSING 61 ADV ANCED OPERA TIONS 12 3 Using the in - focus indicator How to focus 1. Set the lens in the manual focus mode. • Switching between the autofocus and manual focus modes depends on the lens you use. For more details, read the operating manual of the lens.
62 • The camera is not equipped with the focus mode selector . • When the subject comes into focus, the focus indi- cator [ ] lights up in the viewfinder .
63 ADV ANCED OPERA TIONS HARD-TO-AUT OFOCUS SUBJECTS The autofocus system is highly precise, but not per- fect. Depending on the brightness, contrast, shape, and size of your subject, the autofocus system may not operate. In such a case, use the focus-lock technique (see page 60.
IMPRINTING THE EXPOSURE DA T A ON THE NEGA TIVE 64 ADV ANCED OPERA TIONS If a 645 A- or F A lens (autofocus lens) is attached, the camera imprints the following exposure data direct- ly on the negative, outside of the picture frame with each exposure.
65 Imprinted description Characters Number of films Number of frames Exposure mode Shutter speed Aperture setting Exposure compensation value Auto bracketing Metering mode AE lock Flash status Focal length of lens Focus mode Autofocus mode AF area Focus point Film speed Capital letter [A to G] is imprinted to identify the camera.
66 ADV ANCED OPERA TIONS 12 T o set 1. Set the exposure compensation dial to [ D ]. [ D ] will be displayed on the LCD panel. 2. Press up/down button repeatedly until [ on ] appears on the LCD panel. If [ ] is displayed on the LCD panel, the exposure data will be imprinted on the negative.
67 ADV ANCED OPERA TIONS 12 2. Set the exposure compensation dial to [ D ]. 3. Depress the up/down button repeatedly to display [ OFF ] on the LCD panel. • T o return to the Exposure Data Imprint Mode, repeat the above step and [ on ] will reappear on the LCD panel.
USING A PENT AX DEDICA TED EXTERNAL FLASH 68 Using the TTL Auto Flash 1. Remove the hot shoe cover and attach a Pentax dedicated flash unit. 2. T urn the flash ON. 3. Set the flash to TTL Auto mode. 4. Confirm that the flash is fully charged. 5. Focus on the subject and release the shutter .
69 AF500FTZ, AF330FTZ and AF360FGZ • These flash units feature a built-in infrared spotbeam to assist the autofocus system in dim light and low-contrast conditions. • The auto zoom function will automatically adjust the angle of discharge according to the lens focal length only when a 645 F A lens is in use.
70 ADV ANCED OPERA TIONS • When using the Three-Level Auto (red, green, and yellow settings) mode, the aperture value is adjusted as shown in the table. When the flash is fully charged, the shutter speed also varies within the shutter speed range of 1/60 to a slower speed which does not cause camera shake.
Overview of Flash Function 71 ADV ANCED OPERA TIONS CAMERA FUNCTION TYPE A TYPE B TYPE C TYPE D After the flash is charged, the camera automatically switches to the flash-sync speed. Automatic aperture setting in the Programmed AE Mode or Shutter-Priority AE mode.
DA YLIGHT - SYNC SHOOTING 72 ADV ANCED OPERA TIONS Without Daylight-Sync With Daylight-Sync Purpose When taking a portrait in daylight, the subject ’ s face may be cast in shadow .
SLOW -SPEED-SYNC SHOOTING 73 Purpose It is possible to balance the exposure of a fore- ground subject against a dimly lit background by using the flash to properly expose the foreground subject and a slow-shutter-speed to expose the low light background.
USING THE PREVIEW LEVER 74 ADV ANCED OPERA TIONS 12 T o confirm the depth of field in the viewfinder , depress the preview lever . 1. T urn the lens aperture ring a position other than the [ A ] position. 2. Depress the preview lever . The aperture will stop down to the preset value, and the depth- of-field can be confirmed through the viewfinder .
MIRROR LOCK-UP 75 This camera is equipped with a mirror lock-up facility . T o set 1. Set the drive mode selector to [ M. UP ]. 2. Press the shutter release button fully to swing up the mirror . 3. Press the shutter release button again. The shutter is released.
PENT AX FUNCTIONS 76 SETTING PENT AX FUNCTIONS The camera provides 10 Pentax Functions so you can set the camera accordingly to your preferences. T o set: 1. T urn on the camera. Set the exposure compensation dial to [ PF ]. • Function No. and setting content will be displayed on the LCD panel.
77 Resetting the Pentax Function T o reset all the Pentax Functions to the initial settings in the following procedures. 1. Set the exposure compensation dial to [ PF ]. 2. Hold down the up and button at the same time for more than 2 seconds. [ CL ] will be displayed on the LCD panel and all Pentax Functions are reset to initial setting.
SETTING PENT AX FUNCTION 78 [PF 0] Imprinting the character (capital letters A – G) If the imprinting is enabled, a capital letter can be imprinted on the negative. If the user has more than two cameras a different let- ter can be set to identify the negatives from each cam- era.
79 [PF 4] Setting the self-timer delay time The self-timer delay time can be set to 12 sec. or 2 sec. If the 2 sec. self-timer is set, the mirror is locked- up when the shutter release button is pressed and the shutter will be released after 2 seconds.
80 [PF 6] Enabling/disabling the program line for shift- ing. The program line of Programmed AE Mode can be shifted according to your shooting preferences. Pentax Function No.6 Disabling the programmed line shift (initial setting) Enabling the programmed line shift With the programmed line shift is enabled The programmed line is shifted 0.
81 How to display Hold the auto bracketing selector to [ STEP ] position. The total number of films taken and the current exposure counter are displayed in the viewfinder .
82 LCD panel indication Setting contents 15 or 32 frames (initial setting) With 120 film holder ... 15 frames With 220 film holder ... 32 frames 16 or 33 frames With 120 film holder .
ACCESSORIES (OPTIONAL) 83 A number of dedicated accessories are available for this camera. • Cable Switch CS-105/CS-130 A shutter release cord designed for use with the 645 N 2 and MZ-S.
84 ADV ANCED OPERA TIONS AS-80 (AF Center Spot Matte) The standard focusing screen for general photogra- phy . AB-82 (AF Sprit-Image Matte) Matte screen with the sprit image. AG-80 (AF Cross-Lined Matte) Designed to guide picture compositions. The sec- tional lines for horizontal and vertical are graduated in 9mm.
85 ADV ANCED OPERA TIONS Notes on Accessories When using an ordinary polarizing filter , a half mir- ror incorporated into the autofocus system reduces the effectiveness of the autofocus function when used in combination with an ordinary polarizing fil- ter .
Symptoms Causes Remedies Reference TROUBLESHOOTING 86 OTHERS The shutter cannot be released. The exposure counter does not indicate [ ]. Indicators do not appear on the LCD panel. The camera does not focus. The last frame is exposed and wound onto the take-up spool.
OTHERS 87 Symptoms Causes Remedies Reference The subject is too close or difficult to autofocus. The camera may be defective. Use the focus-lock technique or focus manually using the matte field. • Press the mid-roll wind-up button to wind the film, then consult your Pentax distributor or authorized Pentax repair shop.
SPECIFICA TIONS 88 T ype: ––––––––––––––– TTL autofocus, auto-exposure 6 x 4.5 format SLR camera Format: ––––––––––––– 56 x 41.
Film Loading: –––––––– 120 and 220 films semi-automatically loaded with a start mark, 70mm film automatically loaded Film Winding: –––––––– Auto film winding by built-in motor with single/consecutive mode, Approx.2.0 frames/sec.
W ARRANTY POLICY 90 All Pentax cameras purchased through authorized bona fide photographic distribution channels are guaranteed against defects of material or workmanship for a period of twelve months from date of purchase.
Procedure During 12-month W arranty Period. Any Pentax which proves defective during the 12-month warranty period should be returned to the dealer from whom you purchased the equipment or to the manufacturer . If there is no repre- sentatives of the manufacturer in your country , send the equipment to the manufacturer , with postage prepaid.
92 OTHERS In any case, however , shipping charges and customs clearance fees to be borne by the sender . T o prove the date of your purchase when required, please keep the receipt or bills covering the purchase of your equipment for at least a year .
ST A TEMENT OF FCC COMPLIANCE OTHERS 93 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two con- ditions: (1) This device may not cause harmful inter- ference, and (2) this device must accept any inter- ference received, including interference that may cause undesired operation.
Welcome to the Fantastic W orld of Pentax Autofocus Multi-Mode Medium Format Photography The Pentax 645 N 2 , our latest development in the area of the medium format SLR, promises a superior 6 x 4.
MEMO 645N II-cover 01.11.8 11:34 AM ページ3.
Copyright © Asahi Optical Co.Ltd. 2001 57250 ENG This operating manual is printed on recycled paper . 01-200109 Printed in Japan The CE marking assures that this product complies with the requirements of the EC directive for safety . Asahi Optical Co.
Een belangrijk punt na aankoop van elk apparaat Pentax 645N2 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Pentax 645N2 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Pentax 645N2 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Pentax 645N2 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Pentax 645N2 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Pentax 645N2 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Pentax 645N2 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Pentax 645N2 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
