Gebruiksaanwijzing /service van het product 76450 van de fabrikant AT&T
Ga naar pagina of 32
ATT-TP-76450 Common Systems Equipment Interconnection Standards for the ATT Local Exchange Companies and AT&T Corporation Abstract Presented in this document are the Common Systems Equipment Interconnection Standards for equipment placement and interconnection in the ATT LOCAL EXCHANGE companies Network.
Common System s Connection Standards AT&T Services, Inc Date: August 31, 2007 ATT-TP-76450, Issue 9 Copyright ©2004 – 2006, AT&T Knowledge Ventures All rights reserved Page 2 GENERAL 1.
Common System s Connection Standards AT&T Services, Inc Date: August 31, 2007 ATT-TP-76450, Issue 9 Copyright ©2004 – 2006, AT&T Knowledge Ventures All rights reserved Page 3 If the product.
Common System s Connection Standards AT&T Services, Inc Date: August 31, 2007 ATT-TP-76450, Issue 9 Copyright ©2004 – 2006, AT&T Knowledge Ventures All rights reserved Page 4 • TP 76300, AT&T Installation Requirements • TP 76400, AT&T Design Engineering Requirements 1.
Common System s Connection Standards AT&T Services, Inc Date: August 31, 2007 ATT-TP-76450, Issue 9 Copyright ©2004 – 2006, AT&T Knowledge Ventures All rights reserved Page 5 2 DC Power Interconnection Standards 2.1 GENERAL 2.1.1 Nominal -48v DC Nominal –48v DC is the standard platform for pow er delivery to any Network Element (NE).
Common System s Connection Standards AT&T Services, Inc Date: August 31, 2007 ATT-TP-76450, Issue 9 Copyright ©2004 – 2006, AT&T Knowledge Ventures All rights reserved Page 6 2.1.3 Battery Return Conductor 2.1.3.1 Each power feeder shall have its own battery return conductor.
Common System s Connection Standards AT&T Services, Inc Date: August 31, 2007 ATT-TP-76450, Issue 9 Copyright ©2004 – 2006, AT&T Knowledge Ventures All rights reserved Page 7 This section describes the various acceptable DC power connectors and connections that are approved for use within AT&T.
Common System s Connection Standards AT&T Services, Inc Date: August 31, 2007 ATT-TP-76450, Issue 9 Copyright ©2004 – 2006, AT&T Knowledge Ventures All rights reserved Page 8 product. This termination or barrier strip s hould be able to accommodate a ring lug connectors that comply with the UL, CSA and Mil Spec listings.
Common System s Connection Standards AT&T Services, Inc Date: August 31, 2007 ATT-TP-76450, Issue 9 Copyright ©2004 – 2006, AT&T Knowledge Ventures All rights reserved Page 9 2.
Common System s Connection Standards AT&T Services, Inc Date: August 31, 2007 ATT-TP-76450, Issue 9 Copyright ©2004 – 2006, AT&T Knowledge Ventures All rights reserved Page 10 Circuit Breakers - Only thermal magnetic and magnetic type DC circuit breakers are acceptable.
Common System s Connection Standards AT&T Services, Inc Date: August 31, 2007 ATT-TP-76450, Issue 9 Copyright ©2004 – 2006, AT&T Knowledge Ventures All rights reserved Page 11 As an excepti.
Common System s Connection Standards AT&T Services, Inc Date: August 31, 2007 ATT-TP-76450, Issue 9 Copyright ©2004 – 2006, AT&T Knowledge Ventures All rights reserved Page 12 3 Synchronization/Timing Standards The Building Integrated Timing Supply (BITS) c oncept is the method of providing Phase and Frequency synchronization.
Common System s Connection Standards AT&T Services, Inc Date: August 31, 2007 ATT-TP-76450, Issue 9 Copyright ©2004 – 2006, AT&T Knowledge Ventures All rights reserved Page 13 office BITS, .
Common System s Connection Standards AT&T Services, Inc Date: August 31, 2007 ATT-TP-76450, Issue 9 Copyright ©2004 – 2006, AT&T Knowledge Ventures All rights reserved Page 14 Footnote: The.
Common System s Connection Standards AT&T Services, Inc Date: August 31, 2007 ATT-TP-76450, Issue 9 Copyright ©2004 – 2006, AT&T Knowledge Ventures All rights reserved Page 15 (TBOS/TABS) E.
Common System s Connection Standards AT&T Services, Inc Date: August 31, 2007 ATT-TP-76450, Issue 9 Copyright ©2004 – 2006, AT&T Knowledge Ventures All rights reserved Page 16 4.11 Housekeeping/Overhead Alarm Inputs All network elements that will be deployed in a non-central office environment, such as RT, CEV, Cabinet, etc.
Common System s Connection Standards AT&T Services, Inc Date: August 31, 2007 ATT-TP-76450, Issue 9 Copyright ©2004 – 2006, AT&T Knowledge Ventures All rights reserved Page 17 5.7 Minimum Distance Between Connector Housing and 90 Degree Bend Minimum Fiber distance away from a connector housing to bend 90 degrees shall be 3.
Common System s Connection Standards AT&T Services, Inc Date: August 31, 2007 ATT-TP-76450, Issue 9 Copyright ©2004 – 2006, AT&T Knowledge Ventures All rights reserved Page 18 5.13 Maximum optical power levels Optical aggregate power level must not exceed +16.
Common System s Connection Standards AT&T Services, Inc Date: August 31, 2007 ATT-TP-76450, Issue 9 Copyright ©2004 – 2006, AT&T Knowledge Ventures All rights reserved Page 19 6.4 DS1 Cross-Connect Wire DS1 Cross-Connect Wire (Violet/Red) shall be spec ial high twist Wire to mitigate spectrum interference with DSL Wire (Violet/Blue).
Common System s Connection Standards AT&T Services, Inc Date: August 31, 2007 ATT-TP-76450, Issue 9 Copyright ©2004 – 2006, AT&T Knowledge Ventures All rights reserved Page 20 Wire and Cabl.
Common System s Connection Standards AT&T Services, Inc Date: August 31, 2007 ATT-TP-76450, Issue 9 Copyright ©2004 – 2006, AT&T Knowledge Ventures All rights reserved Page 21 Panels that use twisted pair jumper/cables le ss than 25 pair groups will be required to have a cable tray or rings.
Common System s Connection Standards AT&T Services, Inc Date: August 31, 2007 ATT-TP-76450, Issue 9 Copyright ©2004 – 2006, AT&T Knowledge Ventures All rights reserved Page 22 Documentation must be provided in both PD F and HTML format on a CD that is fully indexed and fully searchable.
Common System s Connection Standards AT&T Services, Inc Date: August 31, 2007 ATT-TP-76450, Issue 9 Copyright ©2004 – 2006, AT&T Knowledge Ventures All rights reserved Page 23 7.9 Consistent Terminology throughout Documentation Per GR-454-CORE, Section 2.
Common System s Connection Standards AT&T Services, Inc Date: August 31, 2007 ATT-TP-76450, Issue 9 Copyright ©2004 – 2006, AT&T Knowledge Ventures All rights reserved Page 24 Note: The expectation is that a 2-3 page extraction from a larger manual will be submitted as evidence for each of the tasks above.
Common System s Connection Standards AT&T Services, Inc Date: August 31, 2007 ATT-TP-76450, Issue 9 Copyright ©2004 – 2006, AT&T Knowledge Ventures All rights reserved Page 25 9 APPENDIX A – ATT-TP-76450 Checklist Instructions and Process 9.
Common System s Connection Standards AT&T Services, Inc Date: August 31, 2007 ATT-TP-76450, Issue 9 Copyright ©2004 – 2006, AT&T Knowledge Ventures All rights reserved Page 26 Footnote refe.
Common System s Connection Standards AT&T Services, Inc Date: August 31, 2007 ATT-TP-76450, Issue 9 Copyright ©2004 – 2006, AT&T Knowledge Ventures All rights reserved Page 27 Appendix B – ATT-TP 76450 Checklist Manufacturer:________________________________ Date: ______________________ Equipment Name/Model Number, etc.
Common System s Connection Standards AT&T Services, Inc Date: August 31, 2007 ATT-TP-76450, Issue 9 Copyright ©2004 – 2006, AT&T Knowledge Ventures All rights reserved Page 28 3.2 Primary and Secondary Interfaces 3.3 Clock Output Lead Cabling 3.
Common System s Connection Standards AT&T Services, Inc Date: August 31, 2007 ATT-TP-76450, Issue 9 Copyright ©2004 – 2006, AT&T Knowledge Ventures All rights reserved Page 29 6.11 Central Office Copper Wire and Cable 6.12 Central Office Copper Coaxial Cable 6.
Common System s Connection Standards AT&T Services, Inc Date: August 31, 2007 ATT-TP-76450, Issue 9 Copyright ©2004 – 2006, AT&T Knowledge Ventures All rights reserved Page 30 10 APPENDIX C - References ATT TP documents may be obtained on the AT&T Technical Publication and Nebs Web site .
Common System s Connection Standards AT&T Services, Inc Date: August 31, 2007 ATT-TP-76450, Issue 9 Copyright ©2004 – 2006, AT&T Knowledge Ventures All rights reserved Page 31 11 Appendix D - ATT Contact List Wing Eng, Area Manager-Common Systems Standards, DSX, Copper Cable Standards (925) 823-4616, E-Mail: we2583@camail.
Common System s Connection Standards AT&T Services, Inc Date: August 31, 2007 ATT-TP-76450, Issue 9 Copyright ©2004 – 2006, AT&T Knowledge Ventures All rights reserved Page 32.
Een belangrijk punt na aankoop van elk apparaat AT&T 76450 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen AT&T 76450 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens AT&T 76450 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding AT&T 76450 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over AT&T 76450 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van AT&T 76450 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de AT&T 76450 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met AT&T 76450 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
