Gebruiksaanwijzing /service van het product 899 A02-WR-54G ME01 van de fabrikant Atlantis Land
Ga naar pagina of 59
i I - Fly Wireless Broadband Router User’s Manual (V1.0).
COPYRIGHT The Atlantis Land logo is a registered trademark of Atlantis Land SpA. All other names mentioned mat be trademarks or registered trademarks of their respective owners. Subject t o change without notice. No liability for technical errors and/or omissions.
INDEX CHAPITER 1 ............................................................................................................. 1 1.1 A N O VERVIEW OF THE I- F LY W IRELESS B ROADBAND R OUTER ...................................................... 1 1.2 P ACKAGE C ONTENTS .
3.8.4.3 Routing Table................................................................................................................. 30 3.8.5 Access ....................................................................................................
1 Chapiter 1 Introduction And' besides available on CDRom a Quick Start Guide for a fast configuration. 1.1 An Overview of the I - Fly Wireless Broadband R outer The device for a total freedom of movement without losing the connection.
product and then specific services can be rerouted to specific computers on the local network. For instance, a dedicated web server can be connected to the Internet via the product and then incoming r.
3 application layer gateway (ALG) are supported such as web browser, ICQ, FTP, Telnet, E - mail, News, Net2phone, Ping, NetMeeting and others. • Firewall: Supports SOHO firewall with NAT technology. Automatically detects and blocks the Denial of Service (DoS) attack.
? Enables wireless building - to - building data communic a tion ? Built - in infrastructure mode ? Router provides id eal solution for: ? Difficult - to - wire environments ? Temporary LANs for scena.
5 Chapiter 2 Using I - Fl y Wireless Broadband Router 2.1 Cautions for using the I - Fly Wireless Broadband Router Do not place the Router un der high humidity and high temperature. Do not use the same power source f or Router with other equipment. Do not open or repair the case yourself.
2.3 The Rear Ports PORT MEANING 1 LAN (4 connettori RJ - 45) Auto MDI/MDIX LAN ports automatically sense the cable type when connecting to Ether net - enabled computers.
7 Chapiter 3 Configuration The I - Fly Wireless Broadband Router can be configured with your Web browser . The web browser is included as a standard application in the following operation systems, UNIX, Linux, Mac OS, Windows 95/98/NT/2000/Me, and etc.
3.3 Configuring PC in Windows 3. 3 .1 For Windows 95/98/ME 1. Go to Start / Settings / Control Panel . In the Control Panel, double - click on Network and choose the Configuration tab. 2. Select TCP / IP - > NE2000 Compatible , or the name of any Network Interface Card (NIC) [or Wirel ess Interface Card in] your PC.
9 5. Then select the DNS Configuration tab. 6. Select the Disable D NS radio button and click “ OK” to finish the configuration..
3.3.2 For Windows NT4.0 1. Go to Start / Settings / Control Panel . In the Control Panel, double - click on Network and choose the Protocols tab. 2. Select TCP/IP Protocol and click Properties . 3. Select the Obtain an IP address from a DHCP server radio button and click “ OK” .
11 3.3.3 For Windows 2000 1. Go to Start / Settings / Control Panel . In the Control Panel, double - click on Network and Dial - up Connections . 2. Double - click LAN Ar ea Connection .
4. Select Internet Protocol (TCP/IP) and click Properties . 5. Select the Obtain an IP address automatically and the Obtain DNS server address automatically radio buttons.
13 3.3.4 For Windows XP 1. Go to Start / Control Panel (in Classic View). In the Control Panel, double - click on Network Connections. 2. Double - click Local Area Connection 3.
4. Select Internet Protocol (TCP/IP) and click Properties . 5. Select the Obtain an IP address automatically and the Obtain DNS server address automatically radio buttons 6.
15 3.4 Test TCP/IP After configuring the TCP/IP protocol, you can use the ping command to check if your computer has successfully connected to this Router. The following example shows the ping procedure for Windows 98 . First, execute t he ping command.
3.6 Factory Default Settings Before configurating this Router , you need to know the following default settings. Web Configurator Username : admin Password: admin Device IP Network settings in LAN s ite IP Address : 192.168.1.1 Subnet Mask : 255.255.255.
17 If you ever forget the passwo rd to log in, you may press the RESET button to restore the factory default settings. . 3.8 Configurazione del Router tramite Browser Open the web browser, enter the local port IP address of th is Router , which defaults at http:// 192.
At the configuration homepage (if Quick Setup Wizard starts, please close it or read the printed Quick S tart Guide or read Appendix A), the left navigation page where bookmarks are provided links you.
19 Host Name: Type the host name in the text box. The host name is required by some ISPs. The default host name is "AP - Router." IP Address: This is the IP address of the router. The default IP address is 192.168.1.1. Subnet Mask: Type the subnet mask for the router in the text box.
Connection Type: Potrete scegliere tra le seguenti opzioni DHCP client or Fixed IP , PPPoE oppure PPTP pr esenti nel menù a tendina: Connection Type: Select the connection type, either DHCP client , Fixed IP or PPPoE from the drop - down list.
21 3.8.1.3 Password This screen enables y ou to set administrative and user passwords. These passwords are used to gain access to the router interface. Administrator: Type the password the Administrator will use to log in to the system. The password must be typed again for confirmation.
3.8.1 .4 Time This screen enables you to set the time and date for the router's real - time clock, select your time zone, and enable or disable daylight saving. Local Time: Displays the local time and date. Time Zone: Select your time zone from the drop - down lis t.
23 Enable/Disable: Enables an d disables wireless LAN via the router. SSID: Type an SSID in the text box. The SSID of any wireless d e vice must match the SSID typed here in order for the wireless device to access the LAN and WAN via the router. Channel: Select a transmission channel for wireless communic a tions.
3.8.2.3 Advanced This screen enables you to configure advanced wireless functions. Beacon Interval: Type the beacon interval in the text box. You can specify a value from 1 to 1000. The d e fault beacon interval is 100. RTS Threshold: Type the RTS (Request - To - Send) threshold in the text box.
25 N ote : As soon as 802.1 X security is enabled, all the wireless client stations that are connected to the Router currently will be disconnected. The wireless clients must be configured manually to authenticate themselves with the Radius server to be r econnected.
3.8.3.2 Log This screen enables you to view a running log of router system statistics, events, and activities. The log displays up to 200 entries. Older entries are overwritten by new entries.
27 Time: Displays the time and date that the log entry was created. Message: Displays summary information about the log entry. Source: Displays the source of the communication. Destination: Displays the destination of the communication. Note: Displays the IP address of the communication 3.
Syslog Server: Type the IP address of the Syslog Server if you want the router to listen and receive incoming Sys l og messages. Log Type: En ables you to select what items will be included in the log: ? System Activity: Displays information related to router oper a tion.
29 Network Address: Type the static IP address your network uses to access the Internet. Your ISP or network administrator provides you with this information. Network Mask: Type the network (su bnet) mask for your network. If you do not type a value here, the network mask defaults to 255.
Receive: Click the radio buttons to set the desired transmit parameters, disabled, RIP 1, or RIP 2 3 .8.4.3 Routing Table This screen enables you to view the routing table for the router. The routing table is a database created by the router that displays the network interconnection topology.
31 MAC Filter: Enables you to allow or deny Internet access to users within the LAN based upon the MAC address of their network interface. Click the radio button next to Disabled to disable the MAC filter. Disable: Once t he function of MAC filter is d i sable , those listed in the MAC Table are a llowed Internet access.
bottom of the page. ( Note : C li ck anywhere in the item. Once t he line is selected, the fields automatically load the item's parameters, which you can edit. ) Enable: Click to enable or disable the IP address filter. Range Start: Type the minimum address for the IP range.
33 Domain Blocking You could specify the domains which allow user s to access or deny by clicking one of the two items. Also, add the specified domains in the text box.
3.8.5.2 Virtual Server This screen enables you to create a virtual server via the router. If the router is set as a virtual server, remote users r equesting Web or FTP services through the WAN are directed to local servers in the LAN. The router redirects the request via the protocol and port numbers to the correct LAN server.
35 Applicat ion Outgoing Ingoing ICQ 98, 99a Nessuno Nessuno NetMeeting 2.1 a 3.01 Nessuno 1503 TCP, 1720 TCP VDO Live Nessuno Nessuno mIRC Nessuno Nessuno Cu - SeeMe 7648 TCP &UDP, 24032 UDP 7648.
Service N° Port / Protocol File Transfer Protocol (FTP) Data 20/tcp FTP Commands 21/tcp Telnet 23/tcp Simple Mail Transfer Protocol (SMTP) Email 25/tcp Domain Name Server (DNS) 53/tcp and 53/udp Triv.
37 3.8.5.3 Special AP This screen enables you to specify special applications, such as games, that require multiple connections that are inhibited by NAT. The special applications profiles a re listed in the table at the bottom of the page. Note: When selecting items in the table at the bottom, click anywhere in the item.
3.8.5.4 DMZ This screen enables you to create a DMZ for those compute rs that cannot access Internet applications properly through the router and associated security settings. Note: Any clients added to the DMZ exposes the clients to security risks such as viruses and unauthorized access.
39 Add: Click to add the rule profile to the table at the bottom of the screen. Update: Click to update information for the rule if you have s e lected a list item and have made changes. Delete: Select a list item and click Delete to remove the item from the list.
HTTP: Enables you to set up HTTP access for remote management. ? Enable: Click to enable or disable HTTP access for remote management. • Port: Select the port • Remote IP Range: Type the start IP and END addresses.
41 Save Settings: Click to save the current configuration as a profile that you can load when necessary. Load Settings: Click Browse and go to the location of a stored profile. Click Load to load the profile's settings. Restore Factory Default Settings: Click to restore the defau lt settings.
APPENDIX A Quick Setu p with Wizard Setup wizard is provided as the part of the web configuration utility. You can simply follow the step - by - step process to get your wireless router configuration ready to run in 6 easy steps by clicking on the “ Wizard ” button on the function m enu.
43 Step 2: Choose your time zone Select your time zone from the drop down l ist . Please click “ Next” to continue. Step 3: Set LAN connection and DHCP server Set your IP address and mask. The default IP is 192.168.1.1. If you like to enable DHCP , please click “ Enabled ”.
Step 4: S e t Internet connection Select how the router will set up the Internet connection: Obtained IP automatically; Fixed IP address; PPPoE to obtain IP automatically; PPPoE with a fixed IP address; PPTP.
45 PPPoE to obtain IP automatically:.
PPPoE with a fixed IP address:.
47 PPTP:.
Step 5 : S e t Wireless LAN co nnection Click “enable” to enable wireless LAN. If you enable the wireless LAN, type the SSID i n the text box and select a communications channel. The SSID and channel must be the same as wireless devices attempting communication to the router.
49 APPENDIX B Technical Features Physical Interfaces WAN: 1 RJ45 10/100 Base - TX Fast Ethernet LAN: 4 RJ45 10/10 0 Base - TX Fast Ethernet Wireless 54Mbps (IEEE802.
Support Internet Application ICQ, Netmeeting, MS messanger, PCanywhere, mIRC, CuSeeme... Physical and Environmental Power Consumation: (5V ± 5%, 2.4A AC Adapter) Dimensions/Weight : 205mm*115mm*35mm/.
51 APPENDIX C Glossary Access Point An interview networking device that seamlessly connects wired and wireless networks Authentication Authentication refers to the verification of a transmitted message ’ s integrity. D MZ DMZ (DeMilitarized Zone) is a part of a network that is located between a secure LAN and an insecure WAN.
FTP FTP (File Transfer Protocol) is used to transfer files over a TCP/IP network, and is typically used for transferring large files or uploading the HTML pages for a Web site to the Web server. Gateway Gateways are computers that convert protocols enabling different networks, applications, and operating systems to exchange information.
53 NAT NAT (Networ k Address Translation - also known as IP masquerading) enables an organization to present itself to the Internet with one address. NAT converts the address of each LAN node into one IP address for the Internet (and vice versa).
RTS RTS (Request To Send) is a signal sent from the transmitting station to the receiving station requesting permis sion to transmit data. Server Servers are typically powerful and fast machines that store programs and data. The programs and data are shared by client machines (workstations) on the network.
55 APPENDIX D Support If you have any problems with the Wireless Router, please consult this manual. If you continue to have prob lems you should contact the dealer where you bought this ADSL Router.
Een belangrijk punt na aankoop van elk apparaat Atlantis Land 899 A02-WR-54G ME01 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Atlantis Land 899 A02-WR-54G ME01 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Atlantis Land 899 A02-WR-54G ME01 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Atlantis Land 899 A02-WR-54G ME01 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Atlantis Land 899 A02-WR-54G ME01 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Atlantis Land 899 A02-WR-54G ME01 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Atlantis Land 899 A02-WR-54G ME01 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Atlantis Land 899 A02-WR-54G ME01 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
