Gebruiksaanwijzing /service van het product A02-F24-4G van de fabrikant Atlantis Land
Ga naar pagina of 32
26-Port Dual Web Rack Switch A02-F24-4G USER’S MANUAL A02-F24-4G_ME01.
.
26-Port Dual Web Rack Switch Copyright The Atlantis Land logo is a registered trademark of Atlantis Land SpA. All other nam es mentioned mat be trademarks or registered tradem arks of their respective owners. S ubject to change without notice. No liability for technical errors and/or omissions.
26-Port Dual Web Rack Switch ii TABLE OF CONTENTS CHAPTER 1 ............................................... 1 1.1 A BOUT T HIS G UIDE .....................................................................................................................
26-Port Dual Web Rack Switch iii Reset Settings ................................................................................................................. ................ 23 Logout ..............................................................
.
26-Port Dual Web Rack Switch 1 Chapter 1 Introduction 1.1 About This Guide Congratulations on your purchase of the 24+4G-Port 10/100/1000Mbps Gigabit Ethernet Web Sm art Switch. This device integrates 1000Mbps Gigabit Ethernet, 100Mbps Fast Ethernet and 10Mbps Ethernet network capabilities in a highly flexible package.
26-Port Dual Web Rack Switch 2 internetworking technologies. And with expected advances in the coming years in silicon technology and digital signal processing that will enable Gigab it Ethernet to ev.
26-Port Dual Web Rack Switch 3 QoS QoS gives you full control over which types of outgoi ng data traffic should be given priority by the Switch, ensuring important data like gaming packets m ove through the Switch at lightning speed, even under heavy load.
26-Port Dual Web Rack Switch 4 Chapter 2 Installation This chapter provides unpacking and in stallation inform ation for the Switch. 2.1 Package Contents Open the shipping cartons of the Switch and carefu lly unpacks its contents.
26-Port Dual Web Rack Switch 5 Combine the Switch with the provided screws Then, use screws provided with the equipmen t rack to m ount each switch in the rack.
26-Port Dual Web Rack Switch 6 2.5 AC Power The Switch used the AC power supply 100-240V AC, 50-60 Hz. The power switch is located at the rear of the unit adjacent to the AC power conn ector and the syst em fan.
26-Port Dual Web Rack Switch 7 The Switch is equipped with two mini-GBIC por ts, supported optional 1 000BASE-SX/LX mini-GBIC module (1000BASE-SX mini-GBIC module). Rear Panel Power Switch: This is a switch where you can control to enable or disable the power.
26-Port Dual Web Rack Switch 8 Led SYSTEM Blinking : When the CPU is working, the System LED is blinking. On/Off : The CPU is not working. Ports 1~24 10/100M Status LEDs Link/ACT: Link/Activity On : When the Link/ACT LED lights on, the resp ective port is successfully connected to an Ethernet network.
26-Port Dual Web Rack Switch 9 Chapter 3 Configuration Through the Web Browser you can configure the Switch such as VLAN, Trunking, QoS… etc. With the attached Web Managem e nt Utility, you can easily discove r all the Web Management Switch, assign the IP Address, changing the pa ssword and upgrading the new firmware.
26-Port Dual Web Rack Switch 10 Discovery List This is the list where you can discover all the Web managem e nt devices in the entire network. By pressing the “ Discovery ” button, you can list all the Web Mana gem ent devices in the discovery list.
26-Port Dual Web Rack Switch 11 Monitor List All the Web Smart Device in the Monitor List can be monitored; you can also receive the trap and show the status of the device. System word definitions in the Monitor List: • S: Shows the system symbol of the Web-Smart device, represent for device system is no t alive.
26-Port Dual Web Rack Switch 12 In order to receive Trap information, switch has to be configured with Trap IP and Trap Events in Web browser, which are available in the Trap Setting Menu Add Item: To add a device to the Monitor List manually, enter the IP Address of the device that you want to monitor.
26-Port Dual Web Rack Switch 13 Do NOT upgrade firmware on any At lantis Land product over a wireless connection. Failure of the device may result. Use on ly hard-wired netw ork connections.
26-Port Dual Web Rack Switch 14 Chapter 4 WEB Configuration The 24+4G-Port 10/100/1000Mbps Gigabit Ethernet We b Sm art Switch has a Web GUI interface for smart switch configuration. The Switch can be c onfigured through the Web Browser. A network administrator can manage, control an d monitor the switch from the lo cal LAN.
26-Port Dual Web Rack Switch 15 4.2 Setup Menu When the main page appears, find the Setup menu in the left side of the screen. Click on the setup item that you want to configure. There are 4 options: Port Settings, VLAN Settings, Trunk Setting and Mirror.
26-Port Dual Web Rack Switch 16 To change the port setting, click on the ID parameter to enter to the selected por t to configure its Speed/Disable, Flow control and QoS setting. Speed/Disable: This setting has six modes: 100M Full , 100M Half , 10M Fu ll , 10M Half, Auto and Disable .
26-Port Dual Web Rack Switch 17 This setting determines whether or not the Switch will be handling flow control. Set FlowCtrl to Enable for avoiding data transfer overflow. Or it sets to Disable ; there is eith er no flow control or other hardware/software management.
26-Port Dual Web Rack Switch 18 When add a new Vlan, the members of de fault Vlan 1 are removed automatically. Therefore, packets can only transmit am ong the member ports of new Vlan. Packets can not fordward among the ports which are not included in the new vlan.
26-Port Dual Web Rack Switch 19 For Detail packet information, c lick on the ID parameter as Figure..
26-Port Dual Web Rack Switch 20 System Settings The System Setting includes the System name, Location na me, Login Timeout, IP Address, Subnet Mask and Gateway. Through the Web Management Utility, you can easily re cognize the dev ice by using the System Name and the Location Name.
26-Port Dual Web Rack Switch 21 TRAP The Trap Setting enables the device to m onitor the Trap through the Web Mana gement Utility, set the Trap IP Address of the manage r where the trap to be sent. System Events : Monitoring the system’s trap. • Device Bootup: a trap when booting up the system.
26-Port Dual Web Rack Switch 22 • Abnormal* Transmit Error: a trap when there are transm it data error in copper port. • Abnormal*: 50 error packet count within 10 seconds.
26-Port Dual Web Rack Switch 23 Reset Settings The Factory Reset button helps you to reset the device back to the defa ult setting from the factory. Be aware that the entire configuration will be rese t, th e IP address of the device will be set to default setting 192.
26-Port Dual Web Rack Switch 24 APPENDIX A RJ-45 Pin Specification The following diagram and tables show the standa rd RJ-45 receptacle/connector and their pin RJ-45 Connector pin assignment Contact M.
26-Port Dual Web Rack Switch 25 APPENDIX B Technical Specifications Standard IEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.
26-Port Dual Web Rack Switch 26 APPENDIX C Support If you have any problems with theSwitch , please consult this m anual. If you continue to have problems you should contact the dealer where you bought this Switch.
Een belangrijk punt na aankoop van elk apparaat Atlantis Land A02-F24-4G (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Atlantis Land A02-F24-4G heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Atlantis Land A02-F24-4G vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Atlantis Land A02-F24-4G leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Atlantis Land A02-F24-4G krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Atlantis Land A02-F24-4G bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Atlantis Land A02-F24-4G kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Atlantis Land A02-F24-4G . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
