Gebruiksaanwijzing /service van het product AVIC-F250 van de fabrikant Pioneer
Ga naar pagina of 76
Owner ’ s Manual HIDE-A W A Y NA VIGA TION SYSTEM FOR TR UCK S/CAMPER V ANS A VIC-F130 HIDE-A W A Y NA VIGA TION SYSTEM A VIC-F250 For details on software updates, visit www.
<127075014473>2 Engb 2.
Thank you for buying this P ioneer product. Please read through these ins tructions so you will know how to operate your model properly . After you have finished read ing the instr uctions, keep this document in a safe place for future refer ence. Important ! The screens shown in the examples may differ from actual screens.
– Searching for POIs using preset categories 32 Searching for POIs by categories 33 Searching for a POI directly from the name of the facilities 34 Searching for a nearby POI 35 Selecting a location.
Installation Important safeguards 65 P recautions before connecting the system 65 Before installing this product 66 T o prevent damage 66 P recautions before installation 67 Connecting the system 68 I.
Certain countr y and government laws may pro- hibit or restrict the placement and use of this system in your vehicle. Please comply with all applicable laws and regulations regarding the use, installation and operation of your naviga- tion system. If you want to dispose this product, do not mix it with general household waste.
Licence agreement PIONEER A VIC-F130, A VIC-F250 THIS IS A LEGAL AGREEMENT BETWEEN YOU, AS THE END USER, AND PIONEER CORP . (JAP AN) ( “ PIONEER ” ). PLEASE READ THE TERMS AND CONDITIONS OF THIS AGREEMENT CAREFULL Y BEFORE USING THE SOF TWARE INST ALLED ON THE PIONEER PRODUCTS.
3 LIMIT A TION OF LIABILITY IN NO EVENT SHALL PIONEER BE LIABLE FOR ANY DAMAGES, CL AIM OR LOSS IN- CURRED BY YOU (INCLUDING, WITHOUT LIM- IT A TION, COMPENSA TORY , INCIDENT AL, INDIRECT , SPECIAL, C.
END USER LICENSE AGREEMENT <127075014473>9 Engb 9 Chapter 02 Introduction Introduction.
<127075014473>10 Engb 10 Chapter 02 Introduction.
About the data for the map database ! Modifications related to roads, streets/high- ways, terrain, construction and other things before/during the development period may not be reflected in this database. Inevitably , those modifications af ter that period are not reflected in this database.
CAUTION When a route is calculated, the route and voice guidance for the route are automatically set. Also, for day or time traffic regulations, only infor- mation about traffic regulations applicable at the time when the route was calculated is consid- ered.
! Please remember to wear your seat belt at all times while operating your vehicle. If you are in an accident, your injuries can be considerably more severe if your seat belt is not properly fastened.
! Ejecting an SD memory card during data transfer can damage the SD memor y card. Be sure to eject the SD memor y card by the pro- cedure described in this manual. ! T o prevent data loss and damage to the sto- rage device, never remove it from this naviga- tion system while data is being transferred.
Checking part names and functions 3 4 2 1 1 SD card slot p An SD memor y card is used only to up- grade the software of this product. p F or details of software upgrades, refer to the information on our website. 2 Video output selector switch The switch is used to change the resolution of video output to the AV receiver .
Resetting the micropr ocessor CAUTION Please refer to the related section before clearing. The microprocessor must be reset under the following conditions: ! Prior to using this product for the first time after installation. ! If the product fails to operate properly.
On first-time startup When you use the navigation system for the first time, an initial setup process starts auto - matically . Follow the steps below . 1 Start the engine to boot up the system. 2 Wait approximately 10 seconds, and then press the MODE button of the A V re- ceiver .
9 If needed, modify the default route planning options, then touch [Next]. p Later you can change them in “ Route Set- tings ” . = F or details, refer to Modifying the r oute cal- culation conditions on page 42. p Y ou can restart the configuration wizard later from the “ Settings ” menu.
Screen switch ing overview Navigation screen Press the MODE button of the AV receiver . AV receiver screen (e.g. A VH- P4300DVD) <127075014473>19 Engb 19 Chapter 04 How to use the navigation men.
What you can do on each menu 1 Map screen T ouch [ Show Map ] on the “ Navigation Menu ” screen. 2 Quick menu Registering your favourite menu items in shortcuts allows you to quickly jump to the re- gistered menu screen by a simple touch on the quick menu screen.
p When entering a text, the first character appears in upper case while the rest of the text is in lower case. T ouch to enter an upper case letter or touch twice to turn on Caps Lock. T ouch again and lower case letters return. 3 Back The previous screen returns.
Most of the information provided by your navigation system can be seen on the map. Y ou need to be- come familiar with how information appears on the map. How to read the map screen 1 7 8 2 3 4 6 9 5 a b p Information with an asterisk (*) appears only when the route is set.
T ouching this field displays route information during navigation. By default, only one data field is displayed. T ouch this field to see all data fields. = F or details, refer to Browsing the data field on page 25. 9 Cur rent route* The route currently set is highlighted in colour on the map.
2 T ouch [Show Map] on the “ Navigation Menu ” screen. The map screen appears showing the current position (a blue arrow by default), recom- mended route (an orange line) and surround- ing map area. p The arrow mark appears in blue by default. Y ou can change this icon.
Browsing the data field The data fields are different when you are navi- gating the current route and when you have no specified destination (the orange line is not displayed).
An icon showing a petrol station or a restau- rant will appear on the map during you are driving on motor ways. T ouch the icon to open the details of the next few exits or service sta- tions. Motorway exit services p Y ou can add any of them as a waypoint to your route.
p The map orientation is fixed at “ Heading up ” when the 3D map screen is displayed. 1 Display the map screen. = F or details of the operations, refer to Screen switching over view on page 19. 2 T ouch anywhere on the map during na- vigation. The map stops following the current position and control keys appear .
Scrolling the map to the position you want to see 1 Display the map screen. = F or details of the operations, refer to Screen switching over view on page 19.
p Some information regarding traffic regula- tions depends on the time when the route calculation is per formed. Thus, the infor- mation may not correspond with a certain traffic regulation when your vehicle actually passes through the location in question.
Searching for a locat ion by entering the midpoint of a street Y ou can also navigate to the midpoint of a street if the house number is not available. 1 T ouch [Menu] on the map screen. The “ Navigation Menu ” screen appears. = F or details of the operations, refer to Screen switching over view on page 19.
3 If necessary , modify the country . = F or details of the operations, refer to Search- ing for a location by addr ess on page 29. 4 T ouch [T own] and enter the name of the city/town using its postcode. p T o open the numeric keypad, touch . 5 T ouch [Street] and enter the street name on the keyboard.
4 After entering a few letters, touch [Re- sults]. The list of places opens with names contain- ing the entered character sequence. 5 Scroll the list and touch the place you want. A full screen map appears with the selected point in the middle. The name and address of the place is displayed at the top of the screen.
3 T ouch the POI you want. The searched location appears on the map screen. = F or the subsequent operations, refer to Set- ting a route to your destination on page 39. Searching for POIs by categories Y ou can search for POIs by their categories and subcategories.
6 Select one of the sub place categories (e.g. Hotel or Motel) or touch [List All Places in Accommodation]. The screen appears showing all places in the selected main categor y around the selected lo - cation or along the route. Sometimes the list of brands in the selected place subcategor y appears.
Searches along the current route, and not around a given point. This is useful when you search for a later stopover that results in a minimal detour only , such as searching for upcoming petrol stations or restaurants. (The result list will be ordered by the length of the necessary detour .
The following preset search categories appear , all for searching around the current position (or around the last known position if the cur- rent position is not available).
3 T ouch [Favourites]. The list of “ Favourites ” destinations appears. 4 T ouch the entry you want. The searched location appears on the map screen.
1 T ouch [Menu] on the map screen. The “ Navigation Menu ” screen appears. = F or details of the operations, refer to Screen switching over view on page 19. 2 T ouch [Find] on the “ Navigation Menu ” screen. 3 T ouch [More], then touch [Coo rdinate].
Setting a route to your destination Y ou can set a route to your destination by using either a searched location or the “ My Route ” menu. Setting a route using a searched location 1 Search for a location. = F or details, refer to Searching for and select- ing a location on page 29.
5 T ouch any of the alternatives to see it on the map. If you cannot find a good alternative, touch [ More Results ] and scroll down for routes with different routing methods. 6 Select one of the alternatives and touch [Back]. The previous screen returns.
6 T ouch [Go] to confirm the destination. After a short summary of the route para- meters, the map appears showing the entire route. The route is automatically calculated. p If you have already set the route to the desti- nation, [ Next ] will appears.
Displaying the route overview 1 T ouch [Menu] on the map screen. The “ Navigation Menu ” screen appears. = F or details of the operations, refer to Screen switching over view on page 19. 2 T ouch [My Route] on the “ Navigation Menu ” screen. 3 T ouch [Overview].
1 T ouch [Menu] on the map screen. The “ Navigation Menu ” screen appears. = F or details of the operations, refer to Screen switching over view on page 19. 2 T ouch [More...], then [Settings]. 3 T ouch [Route Settings]. 4 T ouch [V ehicle], then touch the vehicle type you use.
5 T ouch next to the vehicle profile that you want to modify . 6 Scroll the list and touch any of the lines to change the parameters. p Items marked with an asterisk (*) do not ap- pear when the vehicle type is set to “ De- fault Lorry ” . ! Name : T ouch this key to rename the profile.
Setting the route calculation These settings determine how routes will be calculated. Select the type of vehicle you are driving, the road types used in route planning, and the route planning method. 1 T ouch [Menu] on the map screen. The “ Navigation Menu ” screen appears.
4 T ouch any of the listed road types. If needed, scroll the list for all road types. The following options can be set for route calcula- tion: p Items marked with an asterisk (*) do not ap- pear when the vehicle type is set to “ De- fault Lorry ” .
5 When finished, touch and hold [Back]. The map screen returns. Setting driving time alerts p This function is available for AVIC -F130 only . Y ou can set countdown timers to alert you when you need a break or a sleep. This feature can be set for one driver or two alternative dri- vers.
Modifying the route When navigation is already started, there are several ways to modify the current route. The following sections describe some of those op- tions.
5 T ouch [Set Start Point]. 6 Select the start point of the route the same way as you select a destination. 7 T ouch [Set Start]. 8 Select [Go] when the new start point is set. The map screen returns with a transparent arrow mark (showing that there is no GPS re- ception).
1 T ouch [Menu] on the map screen. The “ Navigation Menu ” screen appears. = F or details of the operations, refer to Screen switching over view on page 19. 2 T ouch [My Route] on the “ Navigation Menu ” screen. 3 T ouch [Cancel Route]. The current route is deleted with all its waypoints.
3 T ouch [More]. 4 Scroll down the list and touch [Simulate Navigation]. The simulation starts from the starting point of the route, and using a realistic speed, it leads you through the whole recommended route.
Storing a location in “ Favourites ” Storing your favourite locations as “ Favour - ites ” provides you with the opportunity to save the time and effort of re-entering this informa- tion. “ Favourites ” can include your home lo- cation, favourite places, destinations you have already registered and any location on the map.
9 Set the necessary parameters. ! T ype of Alert : Set the type of alert point. ! Direction of Alert : Set the direction from which you expect the alert. ! Speed Limit : Set the speed limit for this alert point (if ap- plicable). 10 T ouch [Save]. The location is saved as a new alert point.
! If you want to use the T raffic information function in Russia, access www .naviextras.com beforehand and acti- vate the ser vice. ! The ser vice activation is subject to fees.
p When the traffic data is available, a 2D map is displayed with road segments coloured by the severity of traffic incidents. T ouch the event type icon at the road segment and then touch to get information about the traffic incident. p TMC is not a global ser vice.
Displaying the settings screen 1 T ouch [Menu] on the map screen. The “ Navigation Menu ” screen appears. = F or details of the operations, refer to Screen switching over view on page 19. 2 T ouch [More...]. 3 T ouch [Settings]. 4 T ouch the setting item.
The maximum speed set in the vehicle pro - file is also used for this warning. This sys- tem alerts you if you exceed the preset value even if the legal speed limit is higher . This setting lets you decide whether you wish to receive visible and/or audible warn- ings.
! Avoid : T ouching this key lets you bypass parts of the recommended route. ! Cancel Route : Cancels the route and stops navigation. The key is replaced with the next one if way- points are given. ! Remove Next Waypoint : Skips the next waypoint from the route.
Y ou can also set the minimum delay that triggers route recalculation, and you can in- struct the application if you want to confirm every recalculation. ! Event T ypes : T ouch this key to open the list of traffic event types, and select which events to take into account in route calculation.
! 3D T errain : Show or suppress the 3D elevation of the surrounding terrain. ! T rack Logs : T urn on or off track log saving, that is, sav- ing the sequence of the locations your jour- neys go through. ! Place Markers : Select which places to show on the map while navigating.
If you are approaching a motorway exit or a complex intersection and the needed infor- mation exists, the map is replaced with a 3D view of the junction. Y ou can turn this feature on or let the map be displayed for the whole route. ! T unnel View : When entering tunnels, the sur face roads and buildings can be disturbing.
Customising the regional settings These settings allow you to customise this sys- tem for your local language, measurement units, time and date settings and formats, as well as to choose the time zone. 1 Display the settings screen. = F or details of the operations, refer to Dis- playing the settings screen on page 56.
3 Select the language that you want to use for voice guidance messages, then touch [Next]. p Later you can change it in “ Sound and W arnings ” settings. = F or details, refer to Setting the volume and the guidance voice for navigation system on page 56.
More menu The “ More... ” menu provides you with various options and additional applications. 1 T ouch [Menu] on the map screen. The “ Navigation Menu ” screen appears. = F or details of the operations, refer to Screen switching over view on page 19.
Important safeguards WARNING Pioneer does not recommend that you install your navigation system yourself. We recom- mend that only authorised Pioneer service personnel, who have special training and ex- perience in mobile electronics, set up and in- stall this product.
Before installing this product ! Use this unit with a 12-volt batter y and ne- gative earthing only. Failure to do so may result in a fire or malfunction. ! T o avoid shorts in the electrical system, be sure to disconnect the ( – ) batter y cable be- fore installation.
Precautions before installation CAUTION ! Never install this product in places where, or in a manner that: ! Could injure the driver or passengers if the vehicle stops suddenly . ! May interfere with the driver ’ s opera- tion of the vehicle, such as on the floor in front of the driver ’ s seat, or close to the steering wheel or gearstick.
Connecting the system FUSE Secure the RGB cable with the 11 mm (.4 in) screw The navigation unit Where applicable, secure the cable to the AV receiver using an 11 mm (.4 in) screw (supplied). Insert one end of the RGB cable into the “DA T A BUS” slot on the side of this product and secure it with an 11 mm (.
Installing with the hook and loop fastener 1 Thoroughly wipe off both surfaces be- fore affixing the hook and loop fastener . 2 Peel off the protective sheet and attach the hook and loop fastener . Navigation unit Protective sheet 3 Decide on the installation position.
Positioning technology Positioning by GPS The Global Positioning System (GPS) uses a network of satellites orbiting the Earth. Each of the satellites, which orbit at a height of 21 000 km, continually broadcasts radio sig- nals giving time and position information.
! If you make a slight turn. ! If there is a parallel road. ! If there is another road ver y nearby, such as in the case of an elevated motor way . ! If you take a recently opened road that is not on the map. ! If you drive in zigzags. ! If the road has a series of hairpin bends.
! If you enter or exit a multi-storey car park or similar structure using a spiral ramp. ! If your vehicle is turned on a turntable or si- milar structure. ! If trees or other obstacles block the GPS signals for a considerable period. ! If you drive very slowly , or in a start-and- stop manner , as in a traffic jam.
! If the destination is too far , there may be in- stances where the route cannot be set. (If you want to set a long-distance route going across several areas, set waypoints along the way .) ! During voice guidance, turns and intersec- tions from the motor way are announced.
Display information Page Find Find Address 29 Find Places 31, 33 Find on Map 36 Favourites 36 History 37 Coordinate 37 My Route Create Route 40 Edit Route 48, 49 Overview 42 Avoidances 42 Cancel Route 49 More.
Guidance point These are important landmarks along your route, generally intersections. The next gui- dance point along your route is indicated on the map by the flag icon. Point Of Interest (POI) Any of a range of locations stored in the data, such as railway stations, shops, restaurants, and amusement parks.
PIONEER CORPORA TION 1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi, Kanagaw a 212-0031, JAP AN PIONEER EUROPE NV Haven 1087, Keetberglaan 1, B-91 20 Melsele, Belgium/ Belgique TEL: (0) 3/570.05.11 PIONEER ELECTRONICS (USA) INC. P .O. Box 1540, Long Beach, California 90801-1540, U.
Een belangrijk punt na aankoop van elk apparaat Pioneer AVIC-F250 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Pioneer AVIC-F250 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Pioneer AVIC-F250 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Pioneer AVIC-F250 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Pioneer AVIC-F250 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Pioneer AVIC-F250 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Pioneer AVIC-F250 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Pioneer AVIC-F250 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
