Gebruiksaanwijzing /service van het product DEH-6400BT van de fabrikant Pioneer
Ga naar pagina of 36
Operation Manual CD RDS RECEIVER DEH-6400BT English.
Thank you for purchasing this PIONEER product. T o ensure proper use , please read through this manual before using this product. It is especially important that you read and obser ve WARNING s and CAUTION si n this manual. Please keep the manual in a safe and acce ssible place for futur e refer- ence.
If you want to dispose this product, do not mix it with general household waste. There is a se- parate collection system for used electronic products in accordance with legislation that re- quires proper treatment, recovery and recy- cling.
Demo mode Important ! F ailure to connect the red lead (ACC) of this unit to a terminal coupled with ignition switch on/off operations may lead to battery drain. ! Remember that if the feature demo continues operating when the car engine is turned off , it may drain battery power .
Head unit 1 2 a 4 5 6 7 8 d c b 3 9 e Part Part 1 SRC / OFF 8 AUX input jack (3.5 mm stereo jack) 2 (list) 9 / 3 LEVER a MUL TI-CONTROL ( M.C. ) 4 Disc loading slot b / DISP 5 h (eject) c BAND / (iPod) 6 PHONE (phone/on hook) d MIX 7 Detach button e SD memor y card slot Remove the front panel to access the SD memor y card slot.
1 After installation of this unit, turn the ignition switch to ON. SET UP appears. 2 T ur n M.C. to switch to YES. # If you do not operate for 30 seconds, the set up menu will not be displayed. # If you prefer not to set up at this time, turn M.C. to switch to NO .
Removing the front panel to protect your unit from theft 1 Press the detach button to release the front panel. 2 Push the front panel upward ( M ) and then pull it toward ( N ) you. 3 Always keep the detached front panel in a protec- tion device such as a protection case.
T uner Basic operations a 8 9 3 4 6 1 2 7 5 RDS b 3 4 1 2 7 5 Non-RDS or MW/L W 1 TA G indicator 2 T ags transferring indicator 3 Band indicator 4 5 (stereo) indicator 5 LOC indicator Appears when local seek tuning is on. 6 P reset number indicator 7 Signal level indicator 8 TEXT indicator Shows when the radio text is received.
# PTY information and the frequency appear on the display for eight seconds. PTY list News&Inf News (News), Affairs (Current affairs), Info (Informa- tion), Sport (Sports), Weather (Weather), Fina.
! The tuner automatically stores the three lat- est radio text broadcasts received, repla- cing the oldest text with the newest text. Function settings 1 Press M.C. to display the main menu. 2 T ur n M.C. to change the menu option and press to select FUNCTION.
CD/CD-R/CD-RW and exter nal storage devices (USB, SD) Basic operations 7 5 6 4 3 2 1 1 Bit rate/sampling frequency indicator Shows the bit rate or sampling frequency of the current track (file) when the compressed audio is playing. ! When playing back VBR (variable bit rate)-recorded AAC files, the average bit rate value is displayed.
Notes ! Depending on the version of iT unes used to write MP3 files to a disc or media file types, in- compatible text stored within an audio file may be displayed incorrectly .
Playing songs on an iPod 1 Connect an iPod to the USB cable using an iP od Dock Connector . Selecting a track (chapter) 1 T urn LEVER . F ast for warding or reversing 1 T urn and hold down LEVER to the right or left . Selecting an album 1 Press or . Notes ! The iP od cannot be turned on or off when the control mode is set to AUDIO .
Operating this unit ’ s iPod function from your iPod Y ou can listen to the sound from your iP od ap- plications using your car ’ s speakers, when APP is selected. This function is not compatible with the follow- ing iP od models. — iP od with video — iP od nano 1st generation APP Mode is compatible with the following iP od models.
! The following functions are still accessible from the unit even if the control mode is set to iPod / APP . — P ausing — F ast for ward/reverse — T rack up/down ! When the control mode is set to iPod / APP , only Pause or Sound Retriever is available.
The cut-off frequenc y and output level can be ad- justed when the subwoofer output is on. Only frequencies lower than those in the selected range are outputted from the subwoofer . 1 Press M.C. to display the setting mode. 2 Press M.C. to cycle between the cut-off frequency and the output level for the subwoofer .
Canceling call waiting 1 Press PHONE . Adjusting the other party ’ s listening volume 1 T urn LEVER while talking on the phone. ! When private mode is on, this function is not available. T urning private mode on or off 1 Press BAND / while talking on the phone.
Special device (setting a special dev ice) Bluetooth devices that are diffic ult to establish a con- nection with are called special devices. If your Bluetooth device is listed as a special device, select the appropriate one. 1 Press M.C. to display the setting mode.
Setting up for Bluetooth audio Before you can use the Bluetooth audio func- tion you must set up the unit for use with your Bluetooth audio player . This entails establish- ing a Bluetooth wireless connection between this unit and your Bluetooth audio player , and pairing your Bluetooth audio player with this unit.
Phone Function (phone fun ction) Y ou can set Auto answer , Ring tone and PH.B. Name view from this menu. For details, refer to Func- tion and operation on this page. Function and operation 1 Display Phone Function. Refer to Phone Function (phone function) on this page.
This setting allows you to switch your source to USB / iPod automatically. 1 Press M.C. to turn the plug and play function on or off . ! ON – When USB storage device/iPod is con- nected, the source is automatical ly switched to USB / iPod . If you disconnect your USB sto- rage device/iPod , this unit ’ s source is turned off .
Bluetooth device data can be deleted. T o protect per- sonal information, we recommend deleting this data before transferring the unit to other persons.
1 Press M.C. to display the main menu. 2 T ur n M.C. to change the menu option and press to select ENTERT AINMENT. 3 T ur n M.C. to select the function. 4 Press M.C. to display the MIXTRAX. 5 T ur n M.C. to change the display . MIXTRAX — OFF ! When MIXTRAX is selected, the illumina- tion colors selected in Flashing Color are displayed.
2 T ur n M.C. to change the menu option and press to select ILLUMI. 3 T ur n M.C. to display Key and press to select. 4 T ur n M.C. to select the illumination color .
5 Press M.C. to select the primary color . R (red) — G (green) — B (blue) 6 T ur n M.C. to adjust the brightness level. Adjustment range: 0 to 60 # Y ou cannot select a level below 20 for all three of R (red), G (green), and B (blue) at the same time.
T roubleshooting Symptom Cause Action The display automatically returns to the ordinar y dis- play . Y ou did not per- form any opera- tion within about 30 seconds.
CD player Message Cause Action ERROR-07, 11, 12, 17, 30 The disc is dirty. Clean the disc. The disc is scratched. Replace the disc. ERROR-10, 11, 12, 15, 17, 30, A0 There is an elec- trical or mechan- ical error . T urn the ignition switch OFF and back ON, or switch to a different source, then back to the CD player .
Message Cause Action CHECK USB The USB connec- tor or USB cable has short- circuited. Check that the USB connector or USB cable is not caught in some- thing or damaged. The connected USB storage de- vice consumes more than 500 mA (maxi- mum allowable current).
Handling guidelines Discs and player Use only discs that feature either of the following two logos. Use 12-cm discs. Do not use 8-cm discs or an adapter for 8-cm discs. Use only conventional, fully circular discs. Do not use shaped discs. Do not insert anything other than a CD into the CD loading slot.
Do not touch the connectors of the SD memor y card directly with your fingers or with any metal device. Do not insert anything other than an SD memory card into the SD card slot. If a metal object (such as a coin) is inserted into the slot, the internal circuits may break and cause malfunctions.
AAC Compatible format: AAC encoded by iT unes File extension: .m4a Sampling frequency: 11.025 kHz to 48 kHz T ransmission rate: 16 kbps to 320 kbps, VBR Apple Lossless: Not compatible AAC file bought from the iT unes Store (.
iPod compatibility This unit supports only the followi ng iP od models. Supported iPod software versions are shown below . Older versions may not be supported. Made for ! iP od touch 4th generation (sof tware version 4.1) ! iP od touch 3rd generation (sof tware version 3.
! PBAP (Phone Book Access Profile) ! A2DP (Advanced Audio Distribution P ro- file) ! AVP (Audio/Video P rofile) ! AVRCP (Audio/Video Remote Control P ro- file) 1.0 Copyright and trademark Bluetooth The Bluetooth â word mark and logos are regis- tered trademarks owned by Bluetooth SIG, Inc.
Specifications General P ower source ............................. 14.4 V DC (10.8 V to 15.1 V allowable) Grounding system ................... Negative type Maximum current consumption ..................................................... 10.0 A Dimensions (W × H × D): DIN Chassis .
En 35.
PIONEER CORPORA TION 1-1, Shin-ogura, Saiwai-ku, Ka wasaki-shi, Kanagaw a 212-0031, JAP AN PIONEER ELECTRONICS (USA) INC. P .O . Box 1540, Long Beach, Calif ornia 90801-1540, U .S.A. TEL: (800) 421-1404 PIONEER EUROPE NV Haven 1087, K eetberglaan 1, B-9120 Melsele, Belgium/ Belgique TEL: (0) 3/570.
Een belangrijk punt na aankoop van elk apparaat Pioneer DEH-6400BT (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Pioneer DEH-6400BT heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Pioneer DEH-6400BT vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Pioneer DEH-6400BT leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Pioneer DEH-6400BT krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Pioneer DEH-6400BT bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Pioneer DEH-6400BT kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Pioneer DEH-6400BT . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
