Gebruiksaanwijzing /service van het product DEH-P6000UB van de fabrikant Pioneer
Ga naar pagina of 70
Operation Manual CD RECEIVER DEH-P6000UB English.
Thank you for buying this P ioneer product. Please read through these operating instructions so you will know how to operate your model properly. A fter you have finished read ing the instructio ns, keep this man- ual in a safe place for future r eference.
Using the equalizer 25 – Recalling equalizer curves 25 – Adjusting equalizer cur ves 26 – Adjusting 7-band graphic equalizer 26 Adjusting loudness 27 Using subwoofer output 27 – Adjusting subw.
– Disconnecting a cellular phone 44 – Registering a connected cellular phone 44 – Deleting a registered phone 44 – Connecting to a registered cellular phone 45 – Using the phone book 45 – .
Information to User Alteration or modifications carried out without appropriate authorization may invalidate the user ’ s right to operate the equipment. For Canadian model This Class B digital apparatus complies with Canadian ICES-003. About this unit The tuner frequencies on this unit are allo - cated for use in North America.
About MP3 Supply of this product only conveys a license for private, non-commercial use and does not convey a license nor imply any right to use this product in any commercial (i.
CAUTION ! P ioneer accepts no responsibility for data lost on the USB portable audio player/USB mem- ory even if that data is lost while using this unit. ! P ioneer accepts no responsibility for data lost on the iPod even if that data is lost while using this unit.
Removing the front panel 1 Press and hold OPEN to open the front panel. 2 Slide and remove the front panel to- ward you. T ake care not to grip it too tightly or to drop the front panel and protect it from contact with water or other fluids to prevent perma- nent damage.
Feature demo mode The feature demo automatically starts when power to this unit is turned off while the igni- tion switch is set to ACC or ON. Press DISP during feature demo operation to cancel the feature demo mode.
What ’ s What Head unit 1 SRC/OFF button This unit is turned on by selecting a source. Press to cycle through all the available sources. 2 DISP/SCROLL button Press to select different displays. Press and hold to scroll the text information. 3 MUL TI-CONTROL Move to per form manual seek tuning, fast forward, reverse and track search controls.
While using iP od, press this button to shuf- fle all tracks. Press and hold to switch the control mode while using an iPod connected USB con- nector of this unit. If using the iP od with an inter face adapter (CD-IB100 N ), press to switch the shuffle function.
Basic Operations Power ON/OFF T urning the unit on % Press SRC to tur n the unit on. T urning the unit off % Press OFF and hold until the unit tur ns off. Selecting a source Y ou can select a source you want to listen to. T o switch to the built-in CD player , load a disc in the unit (refer to page 15).
T uner Basic Operations 6 1 2 4 5 3 1 Band indicator 2 5 (stereo) indicator Appears when the selected frequency is being broadcast in stereo. 3 LOC indicator Appears when local seek tuning is on. 4 P reset number indicator 5 Signal level indicator Shows the radio wave strength.
The function menu is displayed. 3 T ur n MUL TI-CONTROL to select the function. BSM (best stations memor y) — Local (local seek tuning) Notes ! Y ou can also select the function by pressing FUNCTION on the remote control. ! T o return to the ordinary display , press BAND .
Built-in CD Player Basic Operations 4 1 2 3 5 1 WMA/MP3/AAC/W AV indicator Shows the type of audio file currently playing when the compressed audio is playing. 2 Folder number indicator Shows the folder number currently playing when the compressed audio is playing.
Selecting a track directly When using the remote control, you can select a track directly by entering the desired track number . ! When audio files are being played back, you can select track in the current folder . 1 Press DIRECT. T rack number input display appears.
Selecting files from the file name list File name list lets you see the list of file names (or folder names) and select one of them to playback. 1 Press LIST to switch to the file name list mode. Names of files and folders appear in the dis- play . 2 Use MUL TI-CONTROL to select the de- sired file name (or folder name).
% Press RDM to tur n random play on. T racks play in a random order . # T o turn random play off, press RDM again . Note Y ou can also turn this function on or off in the menu that appears by using MUL TI-CONTROL . Scanning folders and tracks Scan play searches the song within the se- lected repeat range.
6 Push MUL TI-CONTROL left or right to move the cursor to the previous or next character position. 7 Move the cursor to the last position by pushing MUL TI-CONTROL right after enter - ing the title. When you push MUL TI-CONTROL right one more time, the entered title is stored in mem- or y .
! When the USB portable audio player having battery charging function is connected to this unit and the ignition switch is set to ACC or ON, the battery is charged. ! Y ou can disconnect the USB portable audio player/USB memory anytime you want to fin- ish listening to it.
Notes ! Y ou can also select the function by pressing FUNCTION on the remote control. ! T o return to the ordinar y display , press BAND . ! If you select another folder during repeat play, the repeat play range changes to All repeat .
Browsing for a song Searching songs by category Operations to control an iPod with this unit is designed to be as close to the iP od as possible to make operation and song search easy. ! Depending on the number of files in the iP od, there may be delay when displaying a list.
The function menu is displayed. 3 T ur n MUL TI-CONTROL to select the function. Play mode (repeat play) — Shuffle mode (shuffle) — Shuffle all (shuffle all) — Link search (link search) — Contr.
2 Use MUL TI-CONTROL to select an album or song from the list. F or more details about the selecting operation, refer to step 2 of Browsing for a song on page 22. Notes ! If link search is aborted, Not Found is dis- played. ! Y ou can also turn this function on in the menu that appears by using MUL TI-CONTROL .
Introduction of audio adjustments 1 1 1 1 Audio display Shows the audio adjustment status. 1 Press MUL TI-CONTROL to display the main menu. 2 Use MUL TI-CONTROL to select AUDIO. T urn to change the menu option. Press to se- lect. The audio menu is displayed.
Display Equalizer curve Powerful Powerful Natural Natural V ocal V ocal Custom1 Custom 1 Custom2 Custom 2 Flat Flat S.Bass Super bass ! Custom1 and Custom2 are adjusted equal- izer cur ves that you create. Adjustments can be made with a 7-band graphic equali- zer .
3 Push MUL TI-CONTROL left or right to select the equalizer band to adjust. Each time MUL TI-CONTROL is pushed left or right, equalizer bands are selected in the fol- lowing order: 50Hz — 125Hz — 315Hz — 800Hz — 2kHz — 5kHz — 12.5kHz 4 Push MUL TI-CONTROL up or down to adjust the level of the equalizer band.
4 Push MUL TI-CONTROL up or down to adjust the output level of the subwoofer . Each time MUL TI-CONTROL is pushed up or down, subwoofer level increases or decreases. +6 to -24 is displayed as the level is increased or decreased. Boosting the bass Bass boost function boosts the bass level of sound.
Adjusting initial settings 1 1 1 Using the initial settings, you can customize various system settings to achieve optimal per- formance from this unit. 1 F unction display ! Shows the function status. 1 Press SRC and hold until the unit tur ns off. 2 Press MUL TI-CONTROL and hold until the initial setting menu appears in the dis- play .
Setting the clock Use these instructions to set the clock. ! F or this function, verify the topic Adjusting initial settings before initiating the opera- tion. 1 Display the intial setting menu. 2 Use MUL TI-CONTROL to select Clock. 3 Push MUL TI-CONTROL left or right to select the segment of the clock display you wish to set.
! F or this function, verify the topic Adjusting initial settings before initiating the opera- tion. 1 Display the intial setting menu. 2 Use MUL TI-CONTROL to select Dimmer. 3 Press MUL TI-CONTROL to turn dimmer on. # T o turn dimmer off, press MUL TI-CONTROL again.
3 Press MUL TI-CONTROL to switch the tel- ephone muting/attenuation. Pressing MUL TI-CONTROL will switch be- tween TEL A TT (attenuation) and TEL mute (muting) and that status will be displayed. Switching the feature demo The feature demo automatically starts when power to this unit is turned off while the igni- tion switch is set to ACC or ON.
3 Press MUL TI-CONTROL to turn the BT Audio source on. # T o turn the BT Audio source off , press MUL TI-CONTROL again. Entering PIN code for Bluetooth wireless connection T o connect your cellular phone to this unit via Bluetooth wireless technology, you need to enter PIN code on your phone to verify the connection.
Using the AUX source Up to two auxiliar y devices such as VCR or portable devices (sold separately) can be con- nected to this unit. When connected, auxiliar y devices are automatically read as AUX sources and assigned to AUX1 or AUX2 . The relation- ship between AUX1 and AUX2 sources is ex- plained below .
Basic operation F unctions allocated to the following opera- tions are different depending on the con- nected external unit. For details concerning functions, refer to the connected external unit ’ s owner ’ s manual. % Press BAND. % Press and hold BAND.
— While displaying ENT CLOCK (entertain- ment clock) (Refer to Using different enter- tainment displays on this page) Using different entertainment displays Y ou can enjoy entertainment displays while lis- tening to each sound source. 1 Press MUL TI-CONTROL to display the main menu.
Playing songs on iPod Basic operation Y ou can use this unit to contr ol an inter face adapter for iP od, which is sold separately . 2 1 3 1 Song number indicator 2 Play time indicator 3 Song time (progress bar) % Fast forward or reverse Push and hold MUL TI-CONTROL left or right.
3 T ur n MUL TI-CONTROL to select the function. Play mode (repeat play) — Shuffle mode (shuffle) — Pause (pause) Function and operation Play mode and Pause operations are basically the same as that of the built-in CD player . Function name Operation Play mode Refer to Selecting a repeat play range on page 17.
! When you are talking on a cellular phone con- nected to this unit via Bluetooth wireless tech- nology , song playback from your Bluetooth audio player connected to this unit is muted. ! Even if while you are listening to a song on your Bluetooth audio player and you switch to another source, playback of song continues.
Note Before you can use audio players you may need to enter the PIN code into this unit. If your player requires a PIN code to establish a connection , look for the code on the player or in its accompa- nying documentation. R efer to Entering PIN code for Bluetooth wireless connection on page 33.
3 User number indicator Shows the registration number of the cellular phone. 4 Battery strength indicator Shows the batter y strength of cellular phone. ! Batter y strength indicator may differ from the actual batter y strength. ! If the batter y strength is not available, nothing is displayed in the batter y strength indicator area.
Making a phone call V oice recognition 1 Press BAND and hold until Voice dial appears in the display . V oice dial appears in the display. When V oice dial ON is displayed, voice recognition function is now ready .
! Disconect phone (disconnect phone) ! Set phone (registering phone) ! Clear memory (clear memor y) ! PH.B.Name view (phone book name view) ! Number dial (call by entering number) If connected but not registered yet The following functions cannot be operated.
3 Press MUL TI-CONTROL to open the con- nection. Always waiting flashes and the unit is now on standby for connection from a cellular phone. 4 Use cellular phone to connect to this unit. # The link code is set to 0000 as default. Y ou can change this code in the initial setting.
Connecting to a registered cellular phone Connecting to a registered phone manually 1 Display the function menu. Refer to F unction and operation on page 42. 2 Use MUL TI-CONTROL to select Connect phone in the function menu. 3 Push MUL TI-CONTROL up or down to select a registration assignment.
After finding the number you want to call in the phone book, you can select the entry and make the call. 1 Press LIST to display the phone book. 2 Push MUL TI-CONTROL left or right to select the first letter of the name you are looking for . 3 Press MUL TI-CONTROL to display en- tries.
1 Display the detailed list of your desired Phone Book entry . See step 1 to 5 on Calling a number in the phone book on page 45 for how to do this. 2 Press and hold MUL TI-CONTROL to dis- play the name input screen. Edit name is displayed. 3 T ur n MUL TI-CONTROL to switch to the number input screen.
# If the number is already in the Phone Book then the name is also displayed. # T urning MUL TI-CONTROL switches to the pre- vious or next phone number diplayed in the de- tailed list. # If you do not operate anything within about 30 seconds, the list display is canceled automati- cally .
Phone book (phone book) — Missed calls (missed call histor y) — Dialed calls (dialled call histor y) — Received calls (received call his- tor y) — Dial preset (preset phone numbers) — All cl.
1 2 3 5 4 1 XM band indicator 2 XM channel number indicator 3 XM preset number indicator 4 XM channel select setting indicator Shows what channel select setting has been selected. CH is displayed when Channel number is selected, and CA T is dis- played when Category is selected.
Using the remote control % When you find a station that you want to store in memory , press one of preset tuning buttons 1 to 6 and hold until the XM preset number stops flashing. The number you have pressed will flash in the XM preset number indicator and then remain lit.
3 SIRIUS preset number indicator 4 SIRIUS channel select setting indicator Shows what channel select setting has been selected. CH is displayed when Channel number is selected, and CA T is dis- played when Category is selected. I.R is displayed during the Instant Replay mode.
Introduction of advanced operations 1 Press MUL TI-CONTROL to display the main menu. 2 Use MUL TI-CONTROL to select FUNCTION. The function selection menu is displayed. T urn to change the menu option. Press to select. 3 T ur n MUL TI-CONTROL to select the function.
5 Press MUL TI-CONTROL to store the se- lected team in memory . The game alert function will start on that team. # T o turn the Game Alert off of the selected team, press MUL TI-CONTROL again. # When you have already made 12 team selec- tions, FULL is displayed and additional team se- lection is not possible.
Using Instant Replay function F ollowing functions can be operated during the Instant Replay mode. ! T o use this function, Pioneer SIRIUS bus in- ter face (e.g. CD-SB10) is required. ! T o use this function, SIRIUS plug-and-play unit with Instant Replay F unction is re- quired.
Introduction of advanced operations Y ou can only use Compression (compression and DBE) with a multi-CD player that supports them. 1 Press MUL TI-CONTROL to display the main menu. 2 Use MUL TI-CONTROL to select FUNCTION. T urn to change the menu option.
1 Display the function menu. Refer to Introduction of advanced operations on the previous page. 2 Use MUL TI-CONTROL to select compression in the function menu. # If the multi-CD player does not support COMP/DBE, NO COMP is displayed when you at- tempt to select it.
2 Display the function menu. Refer to Introduction of advanced operations on page 56. 3 Use MUL TI-CONTROL to select ITS memo in the function menu. 4 Select the desired track by pushing MUL TI-CONTROL left or right. 5 Push MUL TI-CONTROL down to erase the track from your ITS playlist.
# When playing CD TEXT disc, push MUL TI-CONTROL right to see a list of the tracks in the selected disc. Push MUL TI-CONTROL left to return to the disc list. # If no title is entered for a disc, No Title is dis- played. # No disc is displayed next to the disc number when there is no disc in the magazine.
Selecting a disc ! Y ou can operate this function only when a multi-DVD player is connected to this unit. % Press any of 1 to 6 on the remote con- trol to select the desired disc. Selecting a folder ! Y ou can operate this function only when a DVD player compatible with compressed audio playback is connected to this unit.
Notes ! If you select other discs during repeat play , the repeat play range changes to Disc repeat . ! When playing back Video CD or CD, if you per- form track search or fast for ward/reverse dur- ing T rack repeat , the repeat play range changes to Disc repeat .
Using the remote control Y ou can also store and recall stations assigned to preset tuning numbers P1 to P6 by using the remote control. % When you find a station that you want to store in memory , press one of preset tuning buttons 1 to 6 and hold until the preset number stops flashing.
Error messages When you contact your dealer or your nearest Pioneer Service Center , be sure to have the error message recorded. Built-in CD Player Message Cause Action ERROR-11, 12, 17, 30 Dirty disc Clean disc. ERROR-11, 12, 17, 30 Scratched disc Replace disc.
ERROR-19 Communication failure Perform one of the following opera- tions. - T urn the ignition switch OFF and back ON. -Disconnect the USB portable audio player/USB memory. -Change to a differ- ent source. Then, return to the USB portable audio player/USB memory.
! Avoid leaving discs in excessively hot envir- onments including under direct sunlight. ! Do not attach labels, write on or apply che- micals to the sur face of the discs. ! T o clean a CD, wipe the disc with a sof t cloth outward from the center . ! Condensation may temporarily impair the player ’ s per formance.
! Protocol: bulk ! Minimum amount of memory: 250 MB ! Maximum amount of memor y : 250 GB ! File system: F A T32 and FA T16 ! Supply current: 500 mA Notes ! P artitioned USB memor y is not compatible with this unit.
Example of a hierarchy : F older : Compressed audio file 1 2 3 4 5 6 L e v e l 1 L e v e l 2 L e v e l 3 L e v e l 4 ! 01 to 05 represent assigned folder num- bers. 1 to 6 represent the playback se- quence. The user cannot assign folder numbers and specify the playback se- quence with this unit.
! Regardless of the length of blank section between the songs of original recording, compressed audio discs play with a short pause between songs. ! File extensions such as .
Specifications General Po w e r s o u r c e ............................. 14.4 V DC (10.8 V to 15.1 V allowable) Grounding system ................... N e g ative type Max. current consumption ..................................................... 10.0 A Dimensions (W × H × D): DIN Chassis .
PIONEER CORPORA TION 4-1, MEGURO 1-CHOME, MEGURO-KU T OKY O 153-8654, JAP AN PIONEER ELECTRONICS (USA) INC. P .O . Box 1540, Long Beach, California 90801-1540, U.S.A. TEL: (800) 421-1404 PIONEER EUROPE NV Haven 1087, K eetberglaan 1, B-9120 Melsele, Belgium TEL: (0) 3/570.
Een belangrijk punt na aankoop van elk apparaat Pioneer DEH-P6000UB (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Pioneer DEH-P6000UB heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Pioneer DEH-P6000UB vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Pioneer DEH-P6000UB leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Pioneer DEH-P6000UB krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Pioneer DEH-P6000UB bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Pioneer DEH-P6000UB kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Pioneer DEH-P6000UB . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
