Gebruiksaanwijzing /service van het product DRM-7000 van de fabrikant Pioneer
Ga naar pagina of 47
700 DISC CHANGER CHANGEUR 700 DISQUES 700-DISC-WECHSLER DRM-7000 Operating Instructions Mode d’emploi Bedienungsanleitung 300 DISC CHANGER CHANGEUR 300 DISQUES 300-DISC-WECHSLER DRM-3000.
2 <DRC1184> En The following caution label appears on your changer. Location: rear of the changer [FOR EUROPEAN AND U.K. MODELS] CAUTION This product contains a laser diode of higher class than 1. To ensure continued safety, do not remove any covers or attempt to gain access to the inside of the product.
3 <DRC1184> En English FOR ENGLAND This product complies with the Low Voltage Directive (73/23/EEC), EMC Directives (89/336/EEC, 92/31/EEC) and CE Marking Directive (93/68/EEC).
4 <DRC1184> En Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operate your model properly . After you have finished reading the instructions, put them away in a safe place for future reference.
5 <DRC1184> En English FEA TURES FLEXIBLE UNIT DESIGN The Pioneer DRM-7000/DRM-3000-disc changer is designed so that a variety of different components may be purchased and installed together to meet a variety of different needs. The Pioneer DRM-7000/DRM-3000 comes with bays (i.
6 <DRC1184> En HANDLING PRECAUTIONS FOR SAFETY ÷ Do not install the unit on any unsteady platform or desk, etc., as the unit is tall and heavy . ÷ Do not stack the units or do not place a heavy object on the unit. It is extremely dangerous to do this, because the objects may fall off or the unit may topple over .
7 <DRC1184> En English READ BEFORE USE SECURITY FEA TURES Information on the location of discs within the changer and information to access data on discs are strictly monitored and controlled from the changer control software and the upper -level database management software.
8 <DRC1184> En Read before use DECIDING ON SYSTEM CONFIGURA TION Before installing or using the changer , the first thing which has to be done is to decide what components you should install to where of the changer .
9 <DRC1184> En English Read before use ¶ 50-disc magazine (normal-type) [DRM-AF751] Fitted with a knob which is used to release the locking mechanism, these magazines are convenient for importing or exporting large volumes of discs into or from the changer .
10 <DRC1184> En Read before use ITEMS INCLUDED 20-disc hyper magazine ... 1 Power supply unit [DRM-PW701] (for DRM-7000) A DRM-PW701 add-on power supply unit must be installed in order to use 9 or more drives within the same changer . Always be sure to contact Pioneer service personnel for installation.
11 <DRC1184> En English Read before use DISCS Discs which may be used with the Pioneer DRM- 7000/DRM-3000 The types of discs which may be used with the Pioneer DRM- 7000/DRM-3000 vary depending .
12 <DRC1184> En TO A VOID PROBLEMS The following is a list of operation items that may potentially lead to problems in component functioning. 1. Installation 2.
13 <DRC1184> En English TO A VOID PROBLEMS 7. Discs 8. Disc Magazines 9. Disc Reversal Unit Potential Malfunction/Error Issue ÷ Blank discs, discs which have experienced failed recording opera- tions, and discs whose recording sessions have not been closed, cannot be used on the reader drive.
14 <DRC1184> En NAMES AND FUNCTIONS OF INDIVIDUAL P AR TS FRONT 1 20-disc hyper magazine 2 Control panel 3 Mailslot 4 Front access door 5 LCD message window The backlight to the LCD message wind.
15 <DRC1184> En English REAR 1 Rear plates These plates cover the space for attaching the connector panels. 2 Rear access door 3 Drive SCSI ports (attached connector panel) 4 SCSI ID switch (ID) This switch is used to assign the changer SCSI ID.
16 <DRC1184> En STEP 1 1. Attach the base stabilizers. T o prevent the unit from falling over , be sure to attach the accessory base stabilizers. The DRM-7000 is provided with four stabilizers (one at each corner), and the DRM3000 is provided with two (rear corners only).
17 <DRC1184> En English Installation STEP 2 Readying the changer for operation In order to ready the changer for operation, perform the following steps in the order indicated. 1. T urning on the power (see p. 17) 2. Loosening the shipping screws (see p.
18 <DRC1184> En Installation 2 Connect the power cable. ¶ When the power cable has been connected, the wiring monitor indicator on the rear of the drive (orange) will light up. ¶ When the termination switch of the drive is set to on, the termination indicator (green) will light up.
19 <DRC1184> En English Installation ¶ Install 2 internal drives within the changer in a daisy-chain configuration and connect the drives to the changer . T otal length of SCSI cables: approx. 2.1m (Note that this does not include the length of the cable running from the host computer to the changer .
20 <DRC1184> En Label Guide rails ≠ Installation Lock pin Lock release Lock Handle Release knob 5. Inserting disc magazines Any of the following methods may be used to insert discs into the changer: 1. Insert discs into a normal-type 50-disc magazine and then insert the magazine into the changer .
21 <DRC1184> En English Installation Label E S C E N T F U N C T I O N L O C K P O W E R U N L O C K R O B O T I C S B U S Y D R I V E B U S Y M A I L S L O T O C C U P I E D Lock release Lock W.
22 <DRC1184> En Serial numbers are assigned to each of the slots within the changer into which discs may be inserted. Note that these numbers are assigned even when no disc magazine has been inserted, and that for this reason slot numbers never change even when a new disc magazine is inserted.
23 <DRC1184> En English Installation 6. Closing access doors First check to make sure that all components have been installed into place and all cables have been connected. If this has been done, close the front and the rear access doors, then the initialization of the changer mechanism will begin.
24 <DRC1184> En The Pioneer DRM-7000/DRM-3000 has two operation modes. One is user mode performing the computer -based operations and the other is system administrator mode mainly performing manual operations from the control panel.
25 <DRC1184> En English Operation Press « key Press » key Inquiry submode Config submode Option submode Info submode Mailslot submode Hyper submode Probe submode Door submode Press « key Pres.
26 <DRC1184> En Config submode Config submode is the mode to browse the current status of the magazine bays and the rear bays. It may be used to make sure that all components currently installed in the changer have been properly recognized by the changer .
27 <DRC1184> En English Operation As the rear bays are multipurpose bays, sometimes some bays cannot be used as magazine bays because drives have been installed instead. Then the message displayed will be like that indicated below . ¶ When you wish to check to see what type of disc magazine has been installed, press the ENT key .
28 <DRC1184> En Option submode Some changer functions may be selected at user request. In order to allow system administrators to make the most of the features provided by changer control software and database management software, optional functions may be selected as needed.
29 <DRC1184> En English Operation 2. Hot start When discs have been transported to drives and the power to the changer is turned off and then the power to the changer is turned back on, then the discs will be automatically returned to their original slots.
30 <DRC1184> En Operation Similarly , the hyper magazine will not be automatically ejected even when an eject command is received from the host computer , and instead like the following will be displayed on the LCD message window .
31 <DRC1184> En English 6. Free message When discs are to be inserted or removed in accordance with instructions from the host computer , messages will be displayed on the LCD message window indicating the next operation which must be performed.
32 <DRC1184> En ¶ Import-log Import log is a sequential list of all disc slot numbers in which discs have been newly inserted into the changer when operating in mailslot submode (see p.
33 <DRC1184> En English Run-statistics The run statistics information may be retrieved to display the amount of time or the number of times operations have been performed. Move the cursor to either “ Work-time sum ” or “ Number of moves ” and press the ENT key to browse the corresponding data.
34 <DRC1184> En Mailslot submode Mailslot submode is designed to use mailslot with the control panel in order to exchange, eject, or add discs. NOTE: Although the insertion or removal of discs m.
35 <DRC1184> En English Operation Add ¶ Use the » or « keys to specify the slot number to which you wish to add a disc and press the ENT key .
36 <DRC1184> En Operation If you wish to replace hyper magazines, insert the new hyper magazine. Note that the hyper magazine will be automatically loaded once it has been partway inserted, and that you should be careful not to add excessive force when inserting a magazine.
37 <DRC1184> En English Operation Probe submode may also be used to examine which slot of the hyper magazine a disc is in, in the same manner as for 50-disc magazines.
38 <DRC1184> En Operation Screwdriver Guide rails Lock lever Drive How to add a drive 1 . Enter system administrator mode and enter door submode to open the rear access door .
39 <DRC1184> En English Power cable Wiring monitor indicator T ermination indicator Changer interface cable Wiring monitor indicator Operation 5. Connect the changer interface cable. ¶ When the changer interface cable has been connected, the wiring monitor indicator will flash at two-second intervals.
40 <DRC1184> En Operation NOTES: ¶ If the changer interface cable has not been properly connected, the changer will not be able to recognize the drive at all. Y ou should check the wiring monitor indicator located on the back of the drive. When the cables have been properly connected, the indicator ought to be flashing.
41 <DRC1184> En English Operation Press the ESC key ≠ Press the ESC key ≠ Press the ESC key ≠ Press the ESC key ≠ Close the rear access door ≠ Initialization complete ≠ As the remain.
42 <DRC1184> En Operation 4. Make sure the wiring monitor indicator (orange). It is located on the back of the drive and ought to be flashing at half-second intervals if the drive has been selected in Step 3. Then disconnect the cables to the drive.
43 <DRC1184> En English 12. Press the ESC key several times to return to user mode and close the rear access door . Press the ESC key ≠ Press the ESC key ≠ Press the ESC key ≠ Press the ES.
44 <DRC1184> En Message display M** Disc Not Correct Hyper magazine Disc Not Correct E83 Disc Not Correct Place a new disc & Press ENT -key Remove the disc & Press ENT -key Host must return every disc first Possible cause One or more discs has not been properly placed in the slots of that magazine.
45 <DRC1184> En English Others Message display Host must return all hyper’ s disc scsiID=7 T ermOFF dev-ID= E88, E89,E99, etc. ¶ Memory Failure ¶ Error Possible cause There are some discs that from the hyper magazine remaining in drives. ¶ SCSI cable has not been connected properly .
46 <DRC1184> En SPECIFICA TIONS DRM-7000 DRM-3000 General specifications Description 700-disc changer 300-disc changer Power supply AC 100 V – 240 V , 50/60 Hz + Power consumption Maximum of 5.5 A (500 W) Maximum of 3.3 A (300 W) Weight of main unit (including placement fixtures) 91.
47 <DRC1184> En English SCSI connector specifications 1) Pin layout of SCSI connectors NOTES: ¶ Pin No. 12 to 14, 37 and 39 are not grounded. ¶ The connectors are of the shielded type. ¶ For details on the control commands, refer to the separate specifications manual.
Een belangrijk punt na aankoop van elk apparaat Pioneer DRM-7000 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Pioneer DRM-7000 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Pioneer DRM-7000 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Pioneer DRM-7000 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Pioneer DRM-7000 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Pioneer DRM-7000 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Pioneer DRM-7000 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Pioneer DRM-7000 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
