Gebruiksaanwijzing /service van het product DV-566K-s van de fabrikant Pioneer
Ga naar pagina of 76
01 1 En DVD Player DV-566K-s Operating Instructions DV566.book 1 ページ ２００３年６月１７日 火曜日 午後８時１８分.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners.
4 En Contents 01 Before you start Features . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 What’s in the box . . . . . . . . . . . . . . . . . . . . 7 Putting the batteries in the remote control . 7 Using the remote control . . . . . . . . .
5 En 08 Video Adjust menu Video Adjust . . . . . . . . . . . . . . . . . . . . . . . 49 Creating your own presets . . . . . . . . . . . 49 09 Initial Settings menu Using the Initial Settings menu . . . . . . . . 51 Digital Audio Out settings . . . . .
Before you start 01 6 En Chapter 1 Before you start Features Super VCD compatible This player supports the IEC’s Super VCD standard. Compared to the Video CD stan- dard, Super VCD offers superior picture quality, and allows two stereo soundtracks to be recorded.
Before you start 01 7 En What’s in the box Please confirm that the following accessories are in the box when you open it. • Remote control • AA/R6P dry cell batteries x2 • Audio/video cable (r.
Before you start 01 8 En Using the remote control Keep in mind the following when using the remote control: • Make sure that there are no obstacles between the remote and the remote sensor on the unit.
Before you start 01 9 En disc used; the type of recording; damage, dirt or condensation on either the disc or the player’s pick-up lens. See below for notes about particular software and formats.
Before you start 01 10 En • When naming MP3 files, add the corre- sponding file name extension (.mp3). Files are played according to the file extension. To prevent noise and malfunc- tions, do not use these extensions for other kinds of files. • This player can recognize up to 999 files (MP3/JPEG) and up to 499 folders.
Connecting up 02 11 En Chapter 2 Connecting up Rear panel connections • When connecting this player up to your TV, AV receiver or other components, make sure that all components are switched off and unplugged. 1 D1/D2 VIDEO OUT (Taiwanese model only) Use to connect this player to a TV with a D video input ( page 14 ).
Connecting up 02 12 En Easy connections The setup described here is a basic setup that allows you to play discs using just the cables supplied with the player. In this setup, stereo audio is played through the speakers in your TV. • This player is equipped with copy protec- tion technology.
Connecting up 02 13 En • Before unplugging the player from the power outlet, make sure you first switch it into standby using either the front panel STANDBY/ON button, or the remote control, and wait of the -OFF- message to disappear from the player’s display.
Connecting up 02 14 En Connecting using the component video output You can use the component video output instead of the standard video out jack to connect this player to your TV (or other equip- ment). This should give you the best quality picture from the three types of video output available.
Connecting up 02 15 En Connecting to an AV receiver To enjoy multichannel surround sound you need to connect this player to an AV receiver using a digital output.
Connecting up 02 16 En • My TV doesn’t have any inputs to connect the DVD player. How can I watch DVDs? If your TV has no inputs you can’t use this player with it.
Controls and displays 03 17 En Chapter 3 Controls and displays Front panel 1 STANDBY/ON Press to switch the player on or into standby. 2 This mark indicates compatibility with DVD-RW discs recorded on a DVD recorder in Video Recording mode. 3 FL DIMMER Press to dim or brighten the display.
Controls and displays 03 18 En 17 Karaoke controls MIC input jacks Use to connect a microphone(s) (not supplied) to the player to use the karaoke function. The karaoke function is active when a microphone(s) is connected ( page 30 ). VOLUME control Turn to adjust the volume of the vocals when using the karaoke function ( page 30 ).
Controls and displays 03 19 En Remote control 1 STANDBY/ON Press to switch the player on or into standby. 2 AUDIO Press to select the audio channel or language (see Switching DVD-Video audio language on page 42 ). 3 SUBTITLE Press to select a subtitle display (see Switching subtitles on page 41 ).
Controls and displays 03 20 En 14 OPEN/CLOSE Press to open or close the disc tray. 15 ANGLE Press to change the camera angle during DVD multi-angle scene playback (see Switching camera angles on page 43 ). 16 CLEAR Press to clear a numeric entry. 17 ENTER Use to select menu options, etc.
Getting started 04 21 En Chapter 4 Getting started Switching on After making sure that everything is connected properly and that the player is plugged in, press STANDBY/ON on the front panel, or on the remote control to switch the player on. Also, switch on your TV and make sure that it is set to the input you connected the DVD player to.
Getting started 04 22 En Taiwanese model only 2 Use the / (cursor left/right) buttons to select either ‘Wide screen (16:9)’ or ‘Standard size screen (4:3)’ according to the kind of TV you have, then press ENTER. Taiwanese model only 3 Press ENTER again to finish setting up.
Getting started 04 23 En • Throughout this manual, ‘Select’ means use the cursor buttons to highlight an item on-screen, then press ENTER . • The buttons to navigate the on-screen displays are available on the front panel as well as the remote control.
Getting started 04 24 En 4 Select a DVD language. Some DVD discs feature on-screen menus, soundtracks and subtitles in several languages. Set your preferred language here. Taiwanese model only • Note that the language you choose here may not be available on all discs.
Getting started 04 25 En 9 Is your AV receiver MPEG compatible? Select Compatible , Not Compatible or Don’t Know . 10 Is your AV receiver compatible with 96kHz Linear PCM audio? Select Compatible , Not Compatible or Don’t Know . 11 Press ENTER to complete the setup, or press HOME MENU to quit the Setup Navi- gator without making any changes.
Getting started 04 26 En Playing discs The basic playback controls for playing DVD, CD, Video CD/Super VCD and MP3 discs are covered here. Further functions are detailed in the next chapter. • Throughout this manual, the term ‘DVD’ means DVD-Video, and DVD-R/RW.
Getting started 04 27 En • After I load a DVD disc, it ejects automati- cally after a few seconds! Most likely, the disc is the wrong region for your player. The region number should be printed on the disc; check it against the region number of the player (which you can find on the rear panel).
Getting started 04 28 En Basic playback controls The table below shows the basic controls on the remote for playing discs. The following chapter covers more playback features in more detail. Front panel controls The (play), (stop), and (pause) buttons on the front panel work in exactly the same way as their remote control equivalents.
Getting started 04 29 En • When a Video CD is loaded, the Resume point is lost if the player is switched off. • For the Last Memory function to work, you must press (stop) to stop playback before opening the disc tray. • The Last Memory function doesn’t work with VR format DVD-RW discs.
Getting started 04 30 En Video CD/Super VCD PBC menus Some Video CD/Super VCDs have menus from which you can choose what you want to watch. These are called PBC (Playback control) menus.
Getting started 04 31 En 2 Connect (a) microphone(s) (not supplied) to the MIC input jack. The karaoke function is active whenever (a) microphone(s) is/are connected to the player. Make sure that the plug is inserted firmly and completely into the jack to use the karaoke function.
Playing discs 05 32 En Chapter 5 Playing discs Introduction Most of the features described in this chapter make use of on-screen displays. For an expla- nation of how to navigate these, see Using the on-screen displays on page 22 .
Playing discs 05 33 En • Not all VR format DVD-RW discs have a Playlist. The screen for CDs and Video CD/Super VCDs shows a list of tracks. (The screen below shows a CD loaded.
Playing discs 05 34 En Scanning discs You can fast-scan discs forward or backward at various different speeds. 1 During playback, press or to start scanning. 2 Press repeatedly to increase the scan- ning speed. • MP3 tracks can only be scanned at one speed.
Playing discs 05 35 En • When changing direction with a DVD- Video disc, the picture may ‘move’ in an unexpected way. This is not a malfunc- tion.
Playing discs 05 36 En 1 During playback, press HOME MENU and select ‘Play Mode’ from the on-screen display. 2 During playback, select ‘Repeat’ from the list of functions on the left. 3 Select a repeat play option. If program play is active, select Program Repeat to repeat the program list, or Repeat Off to cancel.
Playing discs 05 37 En Using random play Use the random play function to play titles or chapters (DVD-Video) or tracks (CD, Video CD/Super VCD and MP3 discs) in a random order.
Playing discs 05 38 En • You can't use random play together with program or repeat play. Creating a program list This feature lets you program the play order of titles/groups/chapters/folders/tracks on a disc.
Playing discs 05 39 En • To add a chapter, first highlight the title, then press (cursor right) and select a chapter from the list. For a CD or Video CD/Super VCD, select a track to add to the program list. For an MP3 disc, you can add a whole folder, or a track within a folder to the program list.
Playing discs 05 40 En Editing a program list After creating a program list, you can add, delete and change steps. 1 Press HOME MENU and select ‘Play Mode’ from the on-screen display. 2 Select ‘Program’ from the list of func- tions on the left.
Playing discs 05 41 En Searching a disc You can search DVD-Video discs by title or chapter number, or by time. CDs and Super VCDs can be searched by track number, and Video CDs by track number or time. MP3 discs can be searched by folder or track number.
Playing discs 05 42 En Switching DVD-Video audio language When playing a DVD-Video disc recorded with dialog in two or more languages, you can switch audio language during playback. 1 Press AUDIO repeatedly to select an audio language option. • Some discs only allow you to change audio language from the disc menu.
Playing discs 05 43 En 2 Use the cursor buttons to change the zoomed area. You can change the zoom factor and the zoomed area freely during playback. • If the navigation square at the top of the screen disappears, press ZOOM again to display it.
Playing discs 05 44 En • MP3 disc displays • JPEG disc displays • You can see disc information (number of titles/chapters, tracks, folders and so on) from the Disc Navigator screen. See Using the Disc Navigator to browse the contents of a disc on page 32 .
Viewing JPEG discs 06 45 En Chapter 6 Viewing JPEG discs Viewing JPEG discs After loading a CD/CD-R/RW containing JPEG pictures, press to start a slideshow from the first folder/picture on the disc. The player displays the pictures in each folder in alphabetical order.
Viewing JPEG discs 06 46 En 3 To resume the slideshow from the highlighted file, press ENTER. Using the Photo Browser The Photo Browser displays nine thumbnail images at a time from the current folder. 1 From the Disc Navigator screen, high- light a folder to display then press ENTER.
Audio Settings menu 07 47 En Chapter 7 Audio Settings menu Audio DRC • Default setting: Off When watching Dolby Digital DVDs at low volume, it’s easy to lose the quieter sounds completely—including some of the dialog. Switching Audio DRC (Dynamic Range Control) to On can help by bringing up the quieter sounds, while controlling loud peaks.
Audio Settings menu 07 48 En 1 Press HOME MENU and select ‘Audio Settings’ from the on-screen display. 2 Highlight Virtual Surround, then use the / (cursor left/right) buttons to change to ‘ 2 V/SRS TruSurround’ or ‘Off’, as required.
Video Adjust menu 08 49 En Chapter 8 Video Adjust menu Video Adjust • Default setting: Standard From the Video Adjust screen you can select the standard video presentation or define presets of your own. 1 Press HOME MENU and select ‘Video Adjust’ from the on-screen display.
Video Adjust menu 08 50 En You can adjust any or all of the following picture quality settings: • Contrast – Adjusts the contrast between light and dark. • Brightness – Adjusts the overall bright- ness. • Chroma Level – Adjusts how saturated colors appear.
Initial Settings menu 09 51 En Chapter 9 Initial Settings menu Using the Initial Settings menu The Initial Settings menu gives you complete control in setting up your DVD player, including audio, and video output settings, audience limitation settings, among others.
Initial Settings menu 09 52 En Dolby Digital Out You only need to make this setting if you connected this player to an AV receiver (or other component) using one of the digital outputs.
Initial Settings menu 09 53 En Video Output settings TV Screen • Default setting: 4:3 (Letter Box) If you have a widescreen TV, select the 16:9 (Wide) setting—widescreen DVD software is then shown using the full screen area.
Initial Settings menu 09 54 En • If you connect a TV that is not compatible with a progressive scan signal and switch the player to progressive, you will not be able to see any picture at all.
Initial Settings menu 09 55 En Language settings • The language options shown in the on- screen display illustrations on the following pages may not correspond to those available in your country or region. Audio Language • Default setting: English Taiwanese model only : This setting is your preferred audio language for DVD-Video discs.
Initial Settings menu 09 56 En The DVD-Video format recognizes 136 different languages. Select Other Language if you want to specify a language other than those listed. See also Selecting languages using the language code list on page 65 . • You can change or switch off the subtitles on a DVD disc during playback using the SUBTITLE button.
Initial Settings menu 09 57 En Display settings OSD Language • Default setting: English Taiwanese model only : This sets the language of this player’s on- screen displays. On Screen Display • Default setting: On This sets whether operation displays are shown on-screen ( Play , Resume , Scan and so on.
Initial Settings menu 09 58 En Options Parental Lock • Default level: Off • Default password: none • Default Country code: us (2119) Some DVD-Video discs feature a Parental Lock level. If your player is set to a lower level than the disc, the disc won’t play.
Initial Settings menu 09 59 En Changing your password To change your password, confirm your existing password then enter a new one. 1 Select ‘Password Change’. 2 Use the number buttons to enter your existing password, then press ENTER . The numbers appear as asterisks as you enter them.
Initial Settings menu 09 60 En Setting/changing the Country code You may also want to refer to the Country code list on page 66 . 1 Select ‘Country Code’. 2 Use number buttons to enter your password, then press ENTER. 3 Select a Country code. There are two ways you can do this.
Additional information 10 61 En Chapter 10 Additional information Taking care of your player and discs Handling discs When holding discs of any type, take care not to leave fingerprints, dirt or scratches on the disc surface. Hold the disc by its edge or by the center hole and edge.
Additional information 10 62 En Discs to avoid Discs spin at high speed inside the player. If you can see that a disc is cracked, chipped, warped, or otherwise damaged, don't risk using it in your player—you could end up damaging it. This player is designed for use with conventional, fully circular discs only.
Additional information 10 63 En Place directly on top of an amplifier, or other component in your stereo system that becomes hot in use. Use near a television or monitor as you may experience interference—especially if the television uses an indoor antenna.
Additional information 10 64 En Set to 4:3 (Pan&Scan) , widescreen discs are shown with the left and right sides cropped. Although the picture looks larger, you don’t actually see the whole picture. Please note that many widescreen discs override the player’s settings so that the disc is shown in letter box format regardless of the setting.
Additional information 10 65 En DVD-Video regions All DVD-Video discs carry a region mark on the case somewhere that indicates which region(s) of the world the disc is compatible with. Your DVD player also has a region mark, which you can find on the rear panel.
Additional information 10 66 En Language code list Language (Language code letter), Language code Japanese (ja), 1001 English (en), 0514 French (fr), 0618 German (de), 0405 Italian (it), 0920 Spanish .
Additional information 10 67 En Glossary Analog audio An electrical signal that directly represents sound. Compare this to digital audio which can be an electrical signal, but is an indirect representation of sound. See also Digital audio . Aspect ratio The width of a TV screen relative to its height.
Additional information 10 68 En File extension A tag added to the end of a filename to indicate the type of file. For example, “.mp3” indicates an MP3 file. Interlaced video A method of displaying a picture in which odd-numbered lines are updated in one pass, then even-numbered lines updated in the next.
Additional information 10 69 En S2 S-video output S2 is an enhanced version of S-video which, in addition to aspect ratio information, contains letterbox / pan & scan information. Widescreen TVs which are compatible with S2 S-video automatically switch aspect ratio according to the signal.
Additional information 10 70 En Taiwanese model only : Changing the on-screen display language to English 1 Press HOME MENU. The on-screen display (OSD) appears. 2 Use the /// (cursor up/down/ left/right) buttons to select ‘ ’ from the on-screen display, then press ENTER.
Additional information 10 71 En Setting the TV System (Except Taiwanese model) The default setting of this player is AUTO , and unless you notice that the picture is distorted when playing some discs, you should leave it set to AUTO . If you experience picture distortion with some discs, set the TV system to match your country or region’s system.
Additional information 10 72 En Troubleshooting Incorrect operation is often mistaken for trouble or malfunction. If you think that there is something wrong with this component, check the points below. Sometimes the trouble may lie in another component.
Additional information 10 73 En Screen is stretched or aspect does not change. • The TV Screen setting in the Initial Settings menu is incorrect. See page 63 for how to set it correctly for your TV/monitor. • If your TV/monitor is connected using an S-video cable, try changing the S-Video Out setting ( page 54 ).
Additional information 10 74 En • Static electricity or other external influences may cause malfunctioning of this unit. In this case, unplug the power cord and then plug back in. This will usually reset the unit for proper operation. If this does not correct the problem, please consult your nearest Pioneer service center.
Additional information 10 75 En Specifications General System . . . . . . . . . . . . . . . . . . . . . . . . DVD player Power requirements Taiwanese model . . . . . . . . . . . . .AC 110 V, 60 Hz Other models . . . AC 110–127/220–240 V, 50/60 Hz Power consumption .
PIONEER CORPORATION 4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan PIONEER ELECTRONICS (USA) INC. P.O. BOX 1540, Long Beach, California 90810-1540, U.
Een belangrijk punt na aankoop van elk apparaat Pioneer DV-566K-s (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Pioneer DV-566K-s heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Pioneer DV-566K-s vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Pioneer DV-566K-s leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Pioneer DV-566K-s krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Pioneer DV-566K-s bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Pioneer DV-566K-s kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Pioneer DV-566K-s . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
