Gebruiksaanwijzing /service van het product FH-P6200 van de fabrikant Pioneer
Ga naar pagina of 44
Operation Manual Multi-CD control DSP High power CD Cassette player with FM/AM tuner FH-P6200 English Español.
Thank you for buying this P ioneer product. Please read through these operating instructions so you will know how to operate your model properly. A fter you have finished read ing the instructio ns, put them away in a safe place for future r eference.
Scrolling titles in the display 26 Using compression and bass emphasis 27 Audio Adjustments Introduction of audio adjustments 28 Using balance adjustment 28 Adjusting loudness 29 Using subwoofer o.
About this manual This unit features a number of sophisticated functions ensuring superior reception and op- eration. All the functions have been designed for the easiest possible use, but many are not self-explanator y .
! Remove the batteries if the remote control is not used for a month or longer . ! Do not attempt to recharge the supplied bat- teries. ! Do not mix new and used batteries. ! If the event of batter y leakage, wipe the remote control completely clean and install new bat- teries.
ANGLE button Notes ! While a disc or a cassette is left partially in- serted, you cannot operate the angle. ! By pressing ANGLE and hold, you can open or close the front panel.
Head unit 1 T APE EJECT button Press to eject a tape from your cassette player . 2 DISPLA Y button Press to select different displays. 3 ANGLE button Press to change the display angle. 4 SOURCE button This unit is turned on by selecting a source. Press upward or downward to cycle through all of the available sources.
e COLOR button Press to change the back light color of the display . f LOUD button Press to turn loudness on or off . Press and hold to change to the clock dis- play . g CD EJECT button Press to eject a CD from your built-in CD player . Remote control Operation is the same as when using the but- ton on the head unit.
T urning the unit on % Press SOURCE on the head unit upward or downward, or press TUNER, CASSETTE or CD on the remote, to turn the unit on. When you select a source the unit is turned on. Selecting a source Y ou can select a source you want to listen to.
Listening to the radio 1 3 2 These are the basic steps necessar y to operate the radio. More advanced tuner operation is explained starting on the next page. Important If you are using this unit in North, Central or South America, reset the AM tuning step (see Setting the AM tuning step on page 37).
Introduction of advanced tuner operation 1 3 2 1 LOC indicator Shows when local seek tuning is on. 2 Preset number indicator Shows what preset has been selected. 3 Function display Shows the function status. % Press FUNCTION to display the function names.
3 Press c or d to set the sensitivity . There are four levels of sensitivity for FM and two levels for AM: FM: LOCAL 1 LOCAL 2 LOCAL 3 LOCAL 4 AM: LOCAL 1 LOCAL 2 The LOCAL 4 setting allows reception of only the strongest stations, while lower settings let you receive progressively weaker stations.
Playing a tape 1 3 2 These are the basic steps necessar y to play a tape with your cassette player . More advanced cassette player operation is explained starting on the next page. WARNING Do not use with the front panel left open, after ejecting a cassette tape.
Notes ! Do not insert anything other than a cassette tape into the cassette loading slot. ! A cassette left partially inserted after ejection may incur damage or fall out.
Repeating play Repeat play lets you hear the same track over again. 1 Press FUNCTION to select REPEA T. Press FUNCTION until REPEA T appears in the display . 2 Press a to turn repeat play on. REPEA T :ON appears in the display . The track currently playing will play and then repeat.
Playing a CD 2 1 These are the basic steps necessar y to play a CD with your built-in CD player . More ad- vanced CD operation is explained starting on the next page. WARNING Do not use with the front panel left open, after ejecting a CD. If you do leave it open, it may result in injur y in the event of an accident.
may be displayed. Refer to Understanding built-in CD player error messages on page 41. ! Y ou can eject the CD by pressing and holding CD EJECT with opening the front panel when the CD loading or ejecting cannot operate properly . ! When a CD TEXT disc is inserted, the disc and track titles begin to scroll to the left auto- matically .
1 Press FUNCTION to select REPEA T. Press FUNCTION until REPEA T appears in the display . 2 Press a to turn repeat play on. REPEA T :ON appears in the display . The track currently playing will play and then repeat. 3 Press b to turn repeat play off. REPEA T :OFF appears in the display .
Using disc title functions Y ou can input CD titles and display the title. The next time you insert a CD for which you have entered a title, the title of that CD will be displayed. Entering disc titles Disc title input lets you input CD titles up to 10 letters long and up to 48 disc titles into the built-in CD player .
When you select DISC TITLE , the title of the currently playing disc is shown in the display. # If no title has been entered for the currently playing disc, NO TITLE is displayed. Using CD TEXT functions Some discs have certain information encoded on the disc during manufacture.
Playing a CD 3 2 1 Y ou can use this unit to contr ol a multi-CD player , which is sold separately. These are the basic steps necessar y to play a CD with your multi-CD player . More advanced CD operation is explained starting on the next page. 1 Disc number indicator Shows the disc currently playing.
Introduction of advanced multi-CD player operation 3 2 1 1 DISC indicator Shows when repeat range is selected to cur- rent disc. 2 REPEA T indicator Shows when repeat range is selected to cur- rent track. 3 Function display Shows the function status. % Press FUNCTION to display the function names.
3 Press a to turn random play on. RANDOM :ON appears in the display . T racks will play in a random order within the pre- viously selected MCD or DSC ranges. 4 Press b to turn random play off. RANDOM :OFF appears in the display. T racks will continue to play in order .
2 Press FUNCTION and hold until TITLE IN appears in the display , then press FUNCTION to select ITS. After TITLE IN is displayed, press FUNCTION repeatedly , the following functions appear in the display : TITLE IN (disc title input) ITS (ITS program- ming) 3 Select a desired track by pressing c or d .
Erasing a CD from your ITS playlist When you want to delete all tracks of a CD from your ITS playlist, you can if ITS play is off . 1 Play a CD that you want to delete. Press a or b to select a CD. 2 Press FUNCTION and hold until TITLE IN appears in the display , then press FUNCTION to select ITS.
7 Press BAND to return to the playback display . Notes ! Titles remain in memory, even af ter the disc has been removed from the magazine, and are recalled when the disc is reinserted. ! After data for 100 discs has been stored in memory, data for a new disc will overwrite the oldest one.
Using compression and bass emphasis Y ou can use these functions only with a multi- CD player that supports them. Using COMP (compression) and DBE (dy- namic bass emphasis) functions let you adjust the sound playback quality of the multi-CD player . Each of the functions have a two-st ep adjustment.
Introduction of audio adjustments 2 1 3 1 SW indicator Shows when the subwoofer output is turned on. 2 LOUD indicator Appears in the display when loudness is turned on. 3 Audio display Shows the audio adjustments status. % Press AUDIO to display the audio func- tion names.
Adjusting loudness Loudness compensates for deficiencies in the low- and high-sound ranges at low volume. 1 Press AUDIO to select LOUD. Press AUDIO until LOUD appears in the dis- play . 2 Press a to turn loudness on. LOUD :ON appears in the display . 3 Press b to turn loudness off.
1 Press AUDIO to select the slope setting. Press AUDIO until SLP appears in the display . # When the subwoofer output is on, you can se- lect SLP . 2 Press c or d to select slope.
1 Press AUDIO to select non fading out- put setting. Press AUDIO until NonF AD : 0 appears in the display . 2 Press a or b to adjust the level of the non fading output. Each press of a or b increases or decreases the level of the non fading. +6 24 is dis- played as the level is increased or decreased.
Using the digital signal processor 2 1 6 45 3 3 The digital signal processor lets you control many aspects of sound output including equalization, sound field control and listening position. 1 ASL indicator Shows when the automatic sound levelizer is turned on.
Recalling sound field programs Here is a list of the sound field programs: Button Display Effect 1 STUDIO Studio 2 JAZZ CLUB Jazz club 3 CLUB Club 4 BBE BBE 1 Press DSP to select the sound field con- trol.
2 Press c or d to select an equalizer curve. Each press of c or d selects equalizer cur ves in the following order: S-BASS POWER NA TURAL VOCAL FLA T CUSTOM1 CUSTOM2 Adjusting equalizer curves The factor y supplied equalizer cur ves, with the exception of FLA T , can be adjusted to a fine degree (nuance control).
Button Display Indicator Position a FRONT F ront seats b ALL All seats c FRONT -L Front seat left d FRONT -R Front seat right 1 Press DSP to select the position selec- tor .
Adjusting initial settings 1 Initial settings lets you per form initial set up of different settings for this unit. 1 Function display Shows the function status. 1 Press SOURCE upward or downward re- peatedly until the unit turns off. 2 Press FUNCTION and hold until the clock appears in the display .
lected FM tuning step will appear in the dis- play . Note If seek tuning is per formed in 50 kHz steps, sta- tions may be tuned in imprecisely. T une in the sta- tions with manual tuning or use seek tuning again. Setting the AM tuning step The AM tuning step can be switched between 9 kHz, the preset step, and 10 kHz.
2 Press c or d to swtch RCA output set- ting. Pressing c or d will switch between RCA :S/W (subwoofer) and RCA :NON (non fading) and that status will be displayed. Selecting the digital attenuator When listening to a CD or other source on which the recording level is high, setting the equalizer cur ve level to high may result in dis- tortion.
T urning the clock display on or off Y ou can turn the clock display on or off. % Press LOUD and hold until the clock ap- pears in the display . # T o turn off the clock display , press LOUD and hold until the clock disappears from the display .
Selecting AUX as the source % Press SOURCE upward or downward to select AUX as the source. Press SOURCE until AUX appears in the dis- play . # If the auxiliar y setting is not turned on, AUX cannot be selected. For more details, see Switch- ing the auxiliar y setting on page 37.
Understanding built-in CD player error messages When problems occur during CD play an error message may appear on the display. If an error message appears on the display refer to the table below to see what the problem is and the suggested method of correcting the pro- blem.
CD player and care ! Use only CDs that have either of the two Compact Disc Digital Audio marks as shown below . ! Use only normal, round CDs. If you insert ir- regular , non-round, shaped CDs they may jam in the CD player or not play properly. ! Check all CDs for cracks, scratches or warped discs before playing.
Specifications General Rated power source ............... 1 4 . 4 V D C (allowable voltage range: 12.0 14.4 V DC) Grounding system ................... Negative type Max. current consumption ..................................................... 1 0 .
PIONEER CORPORA TION 4-1, MEGURO 1-CHOME, MEGUR O-KU , TOKY O 153-8654, JAP AN PIONEER ELECTRONICS (USA) INC. P .O . Box 1540, Long Beach, California 90801-1540, U.S.A. TEL: (800) 421-1404 PIONEER EUROPE NV Haven 1087, K eetberglaan 1, B-9120 Melsele, Belgium TEL: (0) 3/570.
Een belangrijk punt na aankoop van elk apparaat Pioneer FH-P6200 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Pioneer FH-P6200 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Pioneer FH-P6200 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Pioneer FH-P6200 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Pioneer FH-P6200 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Pioneer FH-P6200 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Pioneer FH-P6200 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Pioneer FH-P6200 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
