Gebruiksaanwijzing /service van het product PDP-425CMX van de fabrikant Pioneer
Ga naar pagina of 24
PDP-425CMX Plasma Display Panel RS-232C Commands C OMMAND R EFERENCE M ANUAL Manual Version 1.00 March 1, 2006 Pioneer Corporation Pioneer Electronics (USA) Inc.
2 RS-232C Adjustment This display has an RS-232C terminal. It is possible to use a PC to make various adjustments and settings. 1.1 About the RS-232C Adjustment Adjustments using the RS-232C: • The adjustments are written to the same memory area as for the integrator mode (refer to section 5.
3 RS-232C Adjustment 1.2 Interface 1) Connector D-sub 9 pins (male/straight) 2) Pin layout 3) Baud Rate 9600 bps (standard) (switch-able to 1200, 2400, 4800, 19200, 38400 bps) Note The baud rate of this display should be set to match the baud rate of the PC.
4 RS-232C Adjustment 1.3 Combination Connection When controlling/adjusting panels, it is convenient to connect several displays to one PC. By performing a combination connection and assigning IDs to the panels, it is possible to control and adjust several displays at the same time or separately.
5 RS-232C Adjustment 1.4 ID Assignment The ID is assigned from the PC. Commands: <IDC> (ID CLEAR) ........ Clears the assigned ID <IDS> (ID SET) ............. Assigns an ID IDS is only effective when an ID is not assigned. IDs are assigned starting from the panel closest to the PC.
6 Under the connection conditions shown below, use a combination cable for up to 16 panels. Conditions: 1 Length of RS-232C cable connecting PC to PDP-425CMX/PDP-42MXE10: 5 m 2 Combination cable lengt.
7 RS-232C Adjustment 1.5 List of RS-232C Commands 7 Normal Operation Related Commands Command Function Number direct Last Effective Minimum Maximum memory POWER POF Turns the power OFF. PON Turns the power ON. INPUT SELECT INPS01 Switches the main screen to INPUT1.
8 RS-232C Adjustment 7 “ MENU ”–“ SET UP ” related commands Command Function Number direct Last Effective Minimum Maximum memory COLOR TEMP. CTPS01 Sets the color temperature to LOW. CTPS02 Sets the color temperature to MID LOW. CTPS03 Sets the color temperature to MIDDLE.
9 RS-232C Adjustment 7 “ MENU ”–“ OPTION ” related commands Command Function Number direct Last Effective Minimum Maximum memory ENERGY SAVE ESVS00 Sets ENERGY SAVE to standard. ESVS01 Sets ENERGY SAVE to save energy. ESVS02 Sets ENERGY SAVE to fixed brightness.
10 RS-232C Adjustment Command Function Number direct Last Effective Minimum Maximum memory WHITE BALANCE RHI Adjusts R.HIGH of the white balance. 000 255 GHI Adjusts G.HIGH of the white balance. 000 255 BHI Adjusts B.HIGH of the white balance.
11 RS-232C Adjustment Command Function Number direct Last Effective Minimum Maximum memory SCREEN MASK FMKS00 Sets SCREEN MASK to OFF. FMKS02 Sets SCREEN MASK to inverse (negative – positive reversed). FMKS03 Sets SCREEN MASK to white mask. FMKS04 Sets SCREEN MASK to red mask.
12 RS-232C Adjustment Command Function Number direct Last Effective Minimum Maximum memory FRONT INDICATOR LESS00 Sets the FRONT INDICATOR to OFF. LESS01 Sets the FRONT INDICATOR to ON. COLOR MODE CLMS00 Sets the COLOR MODE to NORMAL. CLMS01 Sets the COLOR MODE to STUDIO.
1 3 RS-232C Adjustment Command Function Number direct Last Effective Minimum Maximum memory DISPLAY CALL DITS01 Displays DISPLAY CALL 1. DITS02 Displays DISPLAY CALL 2. IM0 INFORMATION write-in (1-3 characters). IM1 INFORMATION write-in (4-6 characters).
1 4 RS-232C Adjustment 1) Obtaining QST Status Information Sequence Data Content Size Remarks 1 STX 1 Byte 02hex 2 Command echo-back 3 Byte QST (fixed) 3 Generation information 1 Byte 5 (fixed) 4 Inch.
1 5 RS-232C Adjustment 2) <QPI> Obtaining Integrator/PICTURE information Sequence Data Content Size Remarks 1 STX 1 Byte 02hex 2 Command echo-back 3 Byte QPI (fixed) 3 CONTRAST 3 Byte 000 to 255.
1 6 RS-232C Adjustment 5) <QSS> Obtaining SETUP information Sequence Data Content Size Remarks 1 STX 1 Byte 02hex 2 Command echo-back 3 Byte QSS (fixed) 3 COLOR TEMP.
1 7 RS-232C Adjustment Sequence Data Content Size Remarks 27 PRO USE UNDERSCAN 1 Byte 0: OFF 1: ON 28 PRO USE IMAGE PROCESS 1 Byte 1: NORMAL 2: PURE 3: MONOTONE 4: HIGH CONTRAST 29 PRO USE SYGNAL TYPE 1 Byte 1: MOTION 2: STILL 3: NONE STD 30 FRC 1 Byte 0: OFF 1: ON 31 POWER ON MODE INPUT 1 Byte See the figure below.
1 8 RS-232C Adjustment 9) <QAP> Obtaining machine name Sequence Data Content Size Remarks 1 STX 1 Byte 02hex 2 Command echo-back 3 Byte QAP (fixed) 3 Machine name information 18 Byte A/J (North .
1 9 RS-232C Adjustment 7 Check Sum This is data to which 2-Byte ASCII code is added to a data group returned by a QUEST command. STX 02 (hex) 2 Byte 3 Byte 03 (hex) ID QUEST command ETX STX 02 (hex) QUEST command 3 Byte Data *Byte Check sum 2 Byte ETX 03 (hex) PC side Set side A detailed example is given below.
20 Screen Burning 2.03.0 Screen Burning When the same image is reproduced for a long period (still image, telop, etc.), the image is burned into to screen. It may be difficult to remove this image. Burning should be managed by making necessary changes in the video software, projection method, system configuration etc.
21 3.0 Precautions on Connecting Camera Images Connecting and using moving images that are nearly still, such as images from a surveillance camera, could damage the panel and reduce the life or be the cause of other issues. In this situation, it is necessary to set the image quality beforehand.
22 5.0 Precautions 1) If the power shuts down and stays OFF for a long period, an internal problem has probably occurred (failing part, etc.). Turn OFF the main power switch on the Plasma Display then wait 1 to 2 minutes and try turning the power ON again.
2 3 Maintenance Name Part Number Cleaning cloth: Wiping cloth AED1285 Cleaning cloth: Minimax GED-009 Cleaning liquid: B4 GEM1004 1) Be sure to unplug the power cord from the power outlet before performing maintenance. 2) Cabinet and Remote-control Unit Never use solvents such as benzene or thinner.
PDP-425CMX RS-232C Command Reference Manual Pioneer Electronics (USA) Inc. Industrial Solutions Business Group 2265 East 220 th Street Long Beach, California 90810 United States of America (310) 952-2000 http://www.
Een belangrijk punt na aankoop van elk apparaat Pioneer PDP-425CMX (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Pioneer PDP-425CMX heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Pioneer PDP-425CMX vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Pioneer PDP-425CMX leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Pioneer PDP-425CMX krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Pioneer PDP-425CMX bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Pioneer PDP-425CMX kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Pioneer PDP-425CMX . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
