Gebruiksaanwijzing /service van het product S-DV313 van de fabrikant Pioneer
Ga naar pagina of 92
DVD/CD Receiver XV-DV313 Speaker System S-DV313 Operating Instructions HTS.book 1 ページ ２００３年２月２５日 火曜日 午後１時４５分.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
CAUTION: THE ST ANDBY/ON BUTTON IS SECONDARY CONNECTED AND THEREFORE DOES NOT SEP ARA TE THE UNIT FROM MAINS POWER IN ST ANDBY POSITION. therefore install the unit suitable places easy to disconnect the MAINS plug in case of the accident. The MAINS plug of unit should be unplugged from the wall socket when left unused for a long period of time.
4 En Thank you for buying this Pioneer product. Please read through these operating instructions so that you will know how to operate your model properly. After you have finished reading the instructions, put them in a safe place for future reference .
5 En Switching VR format DVD-RW audio channel . . . . . . . . . . . . . . . . . . . . . 44 Switching the Video CD/Super VCD audio channel . . . . . . . . . . . . . . . . . . . . . 44 Zooming the screen . . . . . . . . . . . . . . . . . 45 Switching camera angles .
6 En Proper installation and maintenance of this system . . . . . . . . . . . . . . . . . . . . . . 76 Hints on installation . . . . . . . . . . . . . . . . 76 Cleaning the pickup lens . . . . . . . . . . . . 76 Problems with condensation . . . . . . .
Before you start 01 7 En English Italiano Français Nederlands Español Deutsch Chapter 1 Before you start Features 24-bit/96kHz compatible DAC This system is fully compatible with high sampling-rate discs, capable of delivering better-than-CD sound quality in terms of dynamic range, low-level resolution and high- frequency detail.
Before you start 01 8 En Introduction to home theater You are probably used to using stereo equipment to listen to music, but may not be used to home theater systems that give you many more options (such as surround sound) when listening to soundtracks.
Before you start 01 9 En English Italiano Français Nederlands Español Deutsch DVD-R/RW and CD-R/RW discs (Audio CDs and Video CD/Super VCDs) recorded using a DVD recorder, CD recorder or personal computer may not be playable on this system.
Before you start 01 10 En Compressed audio compatibility • This unit will play CD-ROM, CD-R, and CD-RW discs containing files saved in the MPEG-1 Audio Layer 3 (MP3) or Windows Media Audio (WMA) format with a sampling rate of 32, 44.1 or 48kHz (except 32 kHz WMA files encoded at 20 kbps).
Controls and displays 02 11 En English Italiano Français Nederlands Español Deutsch Chapter 2 Controls and displays Front panel 1 OPEN/CLOSE Press to open/close the disc tray. 2 Operation indicator 3 DVD/CD Press to switch to the DVD/CD function.
Controls and displays 02 12 En Display 1 Tuner indicators European model only Lights when in one of the RDS display or search modes. Lights when a broadcast is being received. Lights when a stereo FM broadcast is being received in auto stereo mode. Lights when FM mono reception is selected.
Controls and displays 02 13 En English Italiano Français Nederlands Español Deutsch 13 Speaker indicators These show which speakers are being used to output the current source. The illustrations below show some example displays. 14 PRGSVE Not applicable to the European model Lights when progressive scan video output is selected (page 61).
Controls and displays 02 14 En Remote control • Functions printed in green on the remote control are accessed by switching the MAIN / SUB switch to SUB . 1 STANDBY/ON Press to switch the system on or into standby. 2 Function select buttons Press to select the source you want to listen to ( DVD (CD) .
Controls and displays 02 15 En English Italiano Français Nederlands Español Deutsch ST +/– Use to select station presets when listening to the radio. 8 MUTE Press to mute all sound from the speakers and headphones (press again to cancel) (page 34).
Controls and displays 02 16 En HOME MENU Press to display (or exit) the on-screen menu for Initial Settings, Play Mode functions, etc. 18 SYSTEM SETUP Use to make various system and surround sound settings (page 55). TEST TONE Use to output the test tone (for speaker setup) (page 57).
Getting started 03 17 En English Italiano Français Nederlands Español Deutsch Chapter 3 Getting started Switching on and setting up After making sure everything is connected up properly, you’re ready to switch on. The first thing to do is to tell the system what kind of TV you’re using, standard or widescreen.
Getting started 03 18 En 3 Use the / (cursor left/right) buttons to select either ‘Wide screen (16:9)’ or ‘Standard size screen (4:3)’ according to the kind of TV you have, then press ENTER. See also Screen sizes and disc formats on page 82 if you’re not sure which one to choose.
Getting started 03 19 En English Italiano Français Nederlands Español Deutsch 6 Use the / (cursor up/down) buttons to set the minute. 7 Press ENTER to confirm. The display flashes to indicate the clock is set. • Press TIMER/CLOCK anytime to display the clock.
Getting started 03 20 En 1 If the system isn’t already on, press STANDBY/ON to switch it on. 2 Press ROOM SETUP. • If you have previously set up the room type and seating position, the display will show the current room settings. 3 Press ENTER.
Getting started 03 21 En English Italiano Français Nederlands Español Deutsch • The button guide at the bottom of every OSD screen shows you which buttons you’ll need to use for that screen. Playing discs The basic playback controls for playing DVD, CD, Video CD/Super VCD and WMA/MP3 discs are covered here.
Getting started 03 22 En If you’re playing an WMA/MP3 disc, it may take a few seconds before playback starts, depending on the complexity of the file structure on the disc. If you loaded a CD/CD-R/RW containing JPEGs, a slideshow will start. See Viewing JPEG discs on page 48 for more on playing these discs.
Getting started 03 23 En English Italiano Français Nederlands Español Deutsch • You may find with some DVD discs that some playback controls don’t work in certain parts of the disc. This is not a malfunction. • Track skip and number buttons for track selection do not work with unfinalized CD- R/RW discs.
Getting started 03 24 En • After I load a DVD disc, it ejects automatically after a few seconds! Most likely, the disc is the wrong region for your system. The region number should be printed on the disc; check it against the region number of the system (which you can find on the rear panel).
Getting started 03 25 En English Italiano Français Nederlands Español Deutsch Video CD/Super VCD PBC menus Some Video CD/Super VCDs have menus from which you can choose what you want to watch.
Getting started 03 26 En Listening to the radio The tuner can receive both FM and AM broadcasts, and lets you memorize your favorite stations so you don’t have to manually tune in every time you want to listen. For more on using the radio, see More tuner features: RDS on page 50.
Getting started 03 27 En English Italiano Français Nederlands Español Deutsch • If you’re using the front panel controls, the TUNER button switches between FM, AM and station presets (see Memorizing stations below).
Getting started 03 28 En 2 Press SYSTEM SETUP. 3 Use the / (cursor left/right) buttons to choose ‘St. Memory?’ then press ENTER. 4 Use the / (cursor up/down) buttons to select the station preset you want. There are 30 preset locations; each can store one station preset.
Home theater sound 04 29 En English Italiano Français Nederlands Español Deutsch Chapter 4 Home theater sound Using this system you can enjoy listening to sources, analog or digital, in either stereo or surround sound.
Home theater sound 04 30 En • PL II Music – Pro Logic II 5.1 channel surround sound, especially suited to music sources, for use with any two- channel source (see also Dolby Pro Logic II Music set.
Home theater sound 04 31 En English Italiano Français Nederlands Español Deutsch Listening with headphones When headphones are connected, only the Stereo (default) and Phones Surround (virtual surround sound for headphones) modes are available. When you connect a pair of headphones, the listening mode automatically changes to Stereo .
Home theater sound 04 32 En Adjusting the Advanced Surround effect level • Default setting: 70 You can emphasize or reduce the effect of the Advanced Surround modes as you like. For each Advanced Surround mode you can set the effect level independently.
Home theater sound 04 33 En English Italiano Français Nederlands Español Deutsch • You can’t use the Virtual Surround Back effect with high sampling rate 88.2 / 96 kHz sources, or with headphones. Using Quiet and Midnight listening modes • Default setting: Off The Quiet listening feature reduces excessive bass or treble in a sound source.
Home theater sound 04 34 En Boosting the bass level There are three bass modes you can use to enhance the bass in a source. • Press BASS MODE repeatedly to choose an option that fits the source you’re listening to.
Playing discs 05 35 En English Italiano Français Nederlands Español Deutsch Chapter 5 Playing discs Introduction Most of the features described in this chapter make use of on-screen displays. For an expla- nation of how to navigate these, see Using the on-screen displays on page 20.
Playing discs 05 36 En • Not all VR format DVD-RW discs have a Playlist. The screen for CDs and Video CD/Super VCDs shows a list of tracks. The screen for an WMA/MP3 disc shows the folder names on t.
Playing discs 05 37 En English Italiano Français Nederlands Español Deutsch 1 During playback, press (pause). 2 Press and hold / or / until slow motion playback starts. • The slow motion speed is shown on- screen. • There is no sound during slow motion playback.
Playing discs 05 38 En 3 Press ENTER on ‘A(Start Point)’ to set the loop start point. 4 Press ENTER on ‘B(End Point)’ to set the loop end point. After pressing ENTER , playback jumps back to the start point and plays the loop. • The minimum loop time is 2 seconds.
Playing discs 05 39 En English Italiano Français Nederlands Español Deutsch For WMA/MP3 discs, select Disc Repeat , Folder Repeat or Track Repeat (or Repeat Off ). Using the front panel display • During playback, press REPEAT to select a repeat play option.
Playing discs 05 40 En For WMA/MP3 discs, select Random All (all folders) or Random Track (current folder only), (or Random Off ). • You can also use the RANDOM button on the remote to select a random play mode. The random mode is indicated in the front panel display and on-screen.
Playing discs 05 41 En English Italiano Français Nederlands Español Deutsch 4 Select a title, chapter, folder or track for the current step in the program list. For a DVD disc, you can add a whole title, or a chapter within a title to the program list.
Playing discs 05 42 En • During program play, press to skip to the next program step. • Press CLR during playback to switch off program play. Press while stopped to erase the program list. Editing a program list using the OSD After creating a program list, you can add, delete and change steps.
Playing discs 05 43 En English Italiano Français Nederlands Español Deutsch 1 Press PROGRAM. You’re prompted to enter a track or folder for the first step in the program list. 2 Use / (cursor up/down) to select a track or a folder, then press ENTER .
Playing discs 05 44 En from. For example, press 4 , 5 , 0 , 0 to have playback start from 45 minutes into the disc. For 1 hour, 20 minutes and 30 seconds, press 8 , 0 , 3 , 0 . 5 Press ENTER to start playback. • The disc must be playing in order to use time search.
Playing discs 05 45 En English Italiano Français Nederlands Español Deutsch Zooming the screen Using the zoom feature you can magnify a part of the screen by a factor of 2 or 4, while watching a DVD or Video CD/Super VCD. 1 During playback, use the ZOOM button to select the zoom factor.
Playing discs 05 46 En • DVD displays • VR format DVD-RW displays • CD and Video CD/Super VCD displays • WMA/MP3 disc displays • JPEG disc displays • You can see disc information (number of titles/chapters, tracks, folders and so on) from the Disc Navigator screen.
Playing discs 05 47 En English Italiano Français Nederlands Español Deutsch • JPEG disc displays File name F older name TI G E R _ 0 1 ZO O _ TR I P playing audio_video discs.
Viewing JPEG discs 06 48 En Chapter 6 Viewing JPEG discs Playing a JPEG slideshow After loading a CD/CD-R/RW containing JPEG pictures, press to start a slideshow from the first folder/picture on the disc. The player displays the pictures in each folder in alphabetical order.
Viewing JPEG discs 06 49 En English Italiano Français Nederlands Español Deutsch • When a folder is highlighted you can press ENTER to open the Photo Browser screen for that folder. See below for more on using the Photo Browser. 3 To resume the slideshow from the highlighted file, press ENTER.
More tuner features: RDS 07 50 En Chapter 7: More tuner features: RDS European model only An introduction to RDS Radio Data System, or RDS as it’s usually known, is a system used by FM radio stations to provide listeners with various kinds of information—the name of the station and the kind of show they’re broadcasting, for example.
More tuner features: RDS 07 51 En English Italiano Français Nederlands Español Deutsch Folk M – Folk music Document – Documentaries In addition, there are three other program types, TEST , Alarm! , and None . Alarm! and TEST are used for emergency announcements.
Using the timer 08 52 En Chapter 8 Using the timer Setting the wake-up timer Use the wake-up timer to set the system to switch on at any time and start playing whatever source you want. • The clock must be set to the correct time for the wake-up timer to work properly (see Setting the clock on page 18).
Using the timer 08 53 En English Italiano Français Nederlands Español Deutsch • You can check the timer settings in standby by pressing TIMER/CLOCK twice. (Press TIMER/CLOCK once to display the current time.) Turning the wake-up timer on/off If the wake-up timer is on, it will switch on the system everyday at the time you have set.
Using the timer 08 54 En 1 Press TIMER/CLOCK twice to reach the timer menu. 2 Use the / (cursor left/right) buttons to select ‘Sleep?’ then press ENTER. 3 Use the / (cursor up/down) buttons to select a switch-off time then press ENTER.
Surround sound setup 09 55 En English Italiano Français Nederlands Español Deutsch Chapter 9 Surround sound setup Setting up surround sound The Room Setup feature (page 19) is designed to give you a basic surround sound setup, however you can make the more detailed settings that may improve the surround sound in your listening room.
Surround sound setup 09 56 En • Center 0.3 m ~ Center 9 m – Distance can be set in increments of 0.3 m. The default is 3 m. Surround speakers distance setting Specifies the distance from your listening position to the front speakers: • Surr. 0.3 m ~ Surr.
Surround sound setup 09 57 En English Italiano Français Nederlands Español Deutsch Setting the channel levels You can set the relative channel levels from your main listening position for each listening mode, including all the Surround and Advanced Surround modes.
Video Adjust menu 10 58 En Chapter 10 Video Adjust menu Video Adjust • Default setting: Standard From the Video Adjust screen you can select the standard video presentation or define presets of your own. 1 Press HOME MENU and select ‘Video Adjust’ from the on-screen display.
Video Adjust menu 10 59 En English Italiano Français Nederlands Español Deutsch You can adjust any or all of the following picture quality settings: • Contrast – Adjusts the contrast between light and dark. • Brightness – Adjusts the overall bright- ness.
Initial Settings menu 11 60 En Chapter 11 Initial Settings menu Using the Initial Settings menu The Initial Settings menu gives you complete control in setting up your DVD system, including video output settings and parental lock settings, among others.
Initial Settings menu 11 61 En English Italiano Français Nederlands Español Deutsch • Default setting: Video • If you make a setting here that is incom- patible with your TV, the TV may not display any picture at all. If this happens switch everything off and reconnect to the TV using the supplied audio/video cable.
Initial Settings menu 11 62 En • When TV format is set to AUTO or NTSC only: When set to Progressive , PAL and NTSC discs are both output as progres- sive NTSC video. See page 73. • When TV format is set to PAL only: Progressive cannot be selected.
Initial Settings menu 11 63 En English Italiano Français Nederlands Español Deutsch • You can switch between the languages recorded on a DVD disc during playback using the AUDIO button. (This does not affect this setting.) See Switching the DVD audio language on page 44.
Initial Settings menu 11 64 En Subtitle Display • Default setting: On When set to On , the player displays subtitles according to the Subtitle Language setting. Set to Off to switch subtitles off altogether. Display settings OSD Language • Default setting: English This sets the language of this system’s on- screen displays.
Initial Settings menu 11 65 En English Italiano Français Nederlands Español Deutsch • Not all discs that you may consider inappropriate for your children use the Parental Lock feature. These discs will always play without requiring the password first.
Initial Settings menu 11 66 En 4 Press ENTER to register the new password and return to the Options menu screen. Setting/changing the Parental Lock level 1 Select ‘Level Change’. 2 Use number buttons to enter your password, then press ENTER. 3 Select a new level.
Initial Settings menu 11 67 En English Italiano Français Nederlands Español Deutsch • Select by code number: Press (cursor right) then use the number buttons to enter the 4-digit Country code (you can find the Country code list on page 83.) 4 Press ENTER to set the new Country code and return to the Options menu screen.
Other connections 12 68 En Chapter 12 Other connections Connecting external antennas External AM antenna Use 5–6 meters of vinyl-insulated wire and set up either indoors or outdoors.
Other connections 12 69 En English Italiano Français Nederlands Español Deutsch • Connect the TV (IN) jacks to the audio outs of your TV (or VCR). This will enable you to hear the TV (or VCR) through this system. Connect using RCA pin- plug stereo cables.
Other connections 12 70 En Recording mode The Recording mode allows you to make analog recordings from the LINE 1 (OUT) jacks. When Recording mode is on, most sound- related functions (including SURROUND , ADVANCED , AUTO , SYSTEM SETUP ) become inactive.
Other connections 12 71 En English Italiano Français Nederlands Español Deutsch • Use a component video cable (not supplied) to connect the COMPONENT VIDEO OUT to a set of component inputs on your TV. • The component video ouptut is switchable between interlaced and progressive formats.
Other connections 12 72 En SCART pin assignment The diagram below shows the SCART 21-pin connector assignment. This connector provides the video and audio signals for connection to a compatible colour TV or monitor.
Additional information 13 73 En English Italiano Français Nederlands Español Deutsch Chapter 13 Additional information Switching off the demo • Default setting: Demo On This system has an automatic demo feature that starts when the system is plugged in for the first time.
Additional information 13 74 En 1 Switch the system into standby. 2 Press SYSTEM SETUP. 3 Use the / (cursor left/right) buttons to select ‘TV System?’, then press ENTER. 4 Use the / (cursor up/down) buttons to select Auto, PAL or NTSC, then press ENTER to confirm.
Additional information 13 75 En English Italiano Français Nederlands Español Deutsch CDs and Video CD/Super VCDs are divided into tracks. CD-ROMs contain folders and files. MP3 and WMA files are referred to as tracks. Folders may contain further folders.
Additional information 13 76 En Don't glue paper or put stickers onto the disc, or use a pencil, ball-point pen or other sharp- tipped writing instrument. These could all damage the disc. For more detailed care information see the instructions that come with discs.
Additional information 13 77 En English Italiano Français Nederlands Español Deutsch Problems with condensation Condensation may form inside the player if it is brought into a warm room from outside, or if the temperature of the room rises quickly. Although the condensation won’t damage the player, it may temporarily impair its performance.
Additional information 13 78 En Troubleshooting Incorrect operations are often mistaken for trouble and malfunctions. If you think that there is something wrong with this component, check the points below. Sometimes the trouble may lie in another component.
Additional information 13 79 En English Italiano Français Nederlands Español Deutsch DVD/CD/Video CD player Timer indicator is blinking and the system will not switch on. • Unplug the unit, then plug back in. Wait for one minute then switch on. • Make sure the fan at the rear of the unit is not being blocked.
Additional information 13 80 En WMA/MP3/JPEG discs Picture disturbance during playback or dark. • This player is compatible with Macro-Vision System copy guard. Some discs include a copy prevention signal, and when this type of disc is played back, stripes etc.
Additional information 13 81 En English Italiano Français Nederlands Español Deutsch Tuner Error Messages Problem Remedy Considerable noise in radio broadcasts. • Connect the antenna (refer to the Setup Guide). • F ully extend the FM wire antenna, position for best reception, and secure to a wall.
Additional information 13 82 En Screen sizes and disc formats DVD-Video discs come in several different screen aspects, ranging from TV programs, which are generally 4:3, to CinemaScope widescreen movies, with an aspect ratio of up to about 7:3. Televisions also come in different aspect ratios; ‘standard’ 4:3 and widescreen 16:9.
Additional information 13 83 En English Italiano Français Nederlands Español Deutsch Language code list Language (Language code letter), Language code Japanese (ja), 1001 English (en), 0514 French (.
Additional information 13 84 En Preset code list Please note that there are cases where only certain functions may be controllable after assigning the proper preset code, or the codes for the manufacturer in the list will not work for the model that you are using.
Additional information 13 85 En English Italiano Français Nederlands Español Deutsch SKANTIC 643 SOLAVOX 631 SONOKO 607, 644 SONOLOR 631, 635 SONTEC 607 SONY 604 SOUNDWAVE 607 STANDARD 641, 644 STER.
Additional information 13 86 En Glossary Analog audio An electrical signal that directly represents sound. Compare this to digital audio which can be an electrical signal, but is an indirect representation of sound. See also Digital audio . Aspect ratio The width of a TV screen relative to its height.
Additional information 13 87 En English Italiano Français Nederlands Español Deutsch File extension A tag added to the end of a filename to indi- cate the type of file.
Additional information 13 88 En WMA WMA is short for Windows Media Audio and refers to an audio compression technology developed by Microsoft Corporation. WMA data can be encoded by using Windows Media Player version 8 or Windows Media Player for Windows XP.
Additional information 13 89 En English Italiano Français Nederlands Español Deutsch Specifications Amplifier section Continuous Power Output (RMS): Front, Center, Surround . . . . 75 W per channel (1 kHz, 10 % T.H.D., 6 Ω ) Subwoofer . . . . 75 W (100 Hz, 10 % T.
Additional information 13 90 En Subwoofer Enclosure . . . . . . . . . . . . . Bass-reflex floor type (magnetically shielded) System . . . . . . . . . . . . . . . . . 16 cm 1-way system Speaker . . . . . . . . . . . . . . . . . . . 16 cm cone type Nominal impedance .
Additional information 13 91 En English Italiano Français Nederlands Español Deutsch HTS.book 91 ページ ２００３年２月２５日 火曜日 午後１時４５分.
<TCLZZ/03C00001> Printed in <XRB3023-A> PIONEER CORPORATION 4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan PIONEER ELECTRONICS (USA) INC. P.O. BOX 1540, Long Beach, California 90810-1540, U.S.A. TEL: (800) 421-1404 PIONEER ELECTRONICS OF CANADA, INC.
Een belangrijk punt na aankoop van elk apparaat Pioneer S-DV313 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Pioneer S-DV313 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Pioneer S-DV313 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Pioneer S-DV313 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Pioneer S-DV313 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Pioneer S-DV313 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Pioneer S-DV313 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Pioneer S-DV313 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
