Gebruiksaanwijzing /service van het product VSX-452 van de fabrikant Pioneer
Ga naar pagina of 24
AUDIO/VIDEO SIEREO RECEIVER VSX-452 II II I I ,:®..Q .®, I Demonstration mode • The demonstration mode is activated by turning on the power switch while holding down the RETURN button (from power standby condition). The demonstration will appear on the display.
IMPORTANT The lightning flash with arrowhead, within an equilateral triangle, is intended to alert the user to the presence of uninsulsted "dangerous voltage" within the product's er_iosure that may be of sufficient magnitude to constitute s risk of electric sl_ock to persons.
CONTENTS BEFORE OPERATING, ADJUST THE POSITION OF THESE SWITCHES ....................................................... 4 ACCESSORY ITEMS ................................................................................................................
t BEFORE OPERATING, ADJUST THE POSITION OF THESE SWITCHES ] TWO VOLTAGE SELECTOR SWITCHES I Only multi-voitage models are provided with these switches. U.S., Canadian, European, U.K. and Australian models are not provided with these switches. Mains voltages in Saudi Arabia are 127 V and 220 V only.
SURROUND EFFECT This unit has a built-in surround processor for adding presence and an expansive effect to the sound. • STUDIO: Select this position to enjoy the effect of listening to music in e recording studio. The source sound is output as it is through the front speakers, with reverberation output through the rear speakers.
SPEAKER INSTALLATION Speaker Installation Examples for Surround To get the most out of the surround system, place the speakers as shown below, An example of speaker location Front left speaker Center .
-AUDIO SYSTEM CONNECTIONS * Illustration shows U.S. and Canadian models. Accessory AM Loop antenna Accessory FM antenna 1 Turntable NOTE FOR FM ANTENNA: Stretch the antenna out to its full length, _nd att/x Jt to _ wall, etc.
coN_$ VIDEO SYSTEM CONNECTIONS * Illustration shows U.S. and Canadian models. LD player AUDIO VI/_DEO OUT OUT L R l VCR 1 VIDEO IN L R (REC) (PLAY) IN OUT TV Monitor _AC wall socket 8 <ARB1424>.
CONNECTIONS l SPEAKER CONNECTIONS ] * Illustration shows U.S. and Canadian models. Left FRONT Center Right Front/Rear speaker _o_ _ cord connection _) _" (_ Push _he lever up (or down). _,31_ _,,_l_] (_ Insert the cord. ___) (_) Pull the lever beck.
CONNECTIONS MULTI-ROOM CONNECTIONS * Illustration shows U.S. and Canadian models. [Set-up example] Speaker Remote control unit I Sub Room I Speaker A A A/V system (including VSX-452) .°in.oo l NOTE: • Be careful not to make the wrong connections for CONTROL IN/OUT (black/ and MULTI-ROOM REMOTE IN (green).
* Illustration shows U.S. and Canadian models. Q ® ®®@ ® ® I ® @ ® @ @®@ @ FM/AM ANTENNA terminals (-I_ Page 7) Connectto FM and AM antennas. _) PHONO input jacks (-I_ Page 7) Connect to the output cables from a turntable. (_) CD input jacks (-I_ Page 7) Connect to the output jacks of a compact disc player.
REAR PANEL FACILITIES AC OUTLET |SWITCHED TOTAL 100 W (0.8 A) MAXI Power supplied through these outlets is turned on and off by the receiver's POWER switch. Total electrical power consumption of connected equipment should not exceed 100 W (0.8 A).
FRONT PANEL FACILITIES (_ MPX MODE button Use to select the auto stereo mode or monaural mode when listening to FM broadcasts. The monaural mode has been selected when the FM MONO indicator in the display section is lit. Auto stereo mode: Normally, leave in this mode for reception.
FRONT PANEL FACILI] I1-_ DISPLAY SECTION ® ® I I I dB .u I-,-° -- o01 + II'i " ':'':'m': _ =H I I ® ® ®®® (9 @ ® © ® CHARACTER/LEVEL display • Displays function, frequency and "SLEEP". • It also displays the level settings during adjustment.
IUNEH MEMORY STATION CALL DIRECT ACCESS TUNING When you know the frequency of the desired station, the frequency can be input directly using the STATION CALL (number) buttons in the following way: 1. Select TUNER with the input selector buttons. 2. Select either FM or AM using the BAND FM/AM button.
MANUAL TUNING Each time the TUNING button "+" or "-" is pressed, the tuning frequency changes by one step, allowing you to find stations manually. 1. Use the BAND FM/AM button to choose either FM or AM. 2. Press TUNING "'-'" or "" + "" button and release quickly.
Press the power switch to the ON position, and turn on the power to the other components you wish to use (for example, TV, VCR, cassette deck etc.). MASTER VOLUME o ....... I . .o. . i • Ioo iiiii-i iDooI®® Input selector PLAYBACK 1. Use the input selector buttons to select the desired program source.
OOLBY PRO LOGIC SURROUND AND DOLBY 3CH LOGIC - LEVEL ADJUSTMENT 1 1. Use SURROUND MODE buttons to select OOLBY PRO LOGIC SURROUND or use the DOLBY 3CH LOGIC button to switch DOLBY 3CH LOGIC ON. 2. Use SPEAKERS button to turn on front speakers. 3. Adjust MASTER VOLUME to a suitable llatenlng level.
I LOADING BATTERIES 1. Open the battery compartment cover on the rear of the remote control unit. The cover should open easily if you slide it in the direction of the arrow while pressing on it with your thumb.
REMOTE CONTROL OPERATION I RECEIVER TUNER AND AMPLIFIER SECTION OPERATION ] (_) SIMULATED STEREO button Switches simulated stereo mode ON/OFF. ® @ .® ® ® [TUNER SECTION OPERATION] I Set the AUDIO/VIDEO switch to AUDIO. I 3CH LOGIC button Switches DOLBY 3CH LOGIC ON/OFF.
REMOTE CONTROL OPERATION CD P_,YER_-CASSETTE DECK, TV, VCR, and LD PLAYER OPERATION Operation of some of the functions of Pioneer components bearing the _il mark is possible. [CASSETTE DECK OPERATION] Set the AUDIO/VIDEO to switch AUDIO. J r C3r7-r7 ® .
REMOTE CONTROL OPERATION [VCR OPERATION] I Set AUDIO/VIDEO switch VIDEO. the to J (_ Operation buttons TVNCR button: This button can be used only for VCRs with a VCR TV selector. Toggles the antenna output between VCR and TV. • (STOP) button: Stops tape transport.
TROUBLESHOOTING Symptom. High noise level. Remedy • Tune the station in correctly. Cause • Station has not been tuned in to correct frequency. • Antenna has not been connected or has become disconnected. FM reception • Accessory FM antenna remains bundled up or it is not pointing in right direction.
SPECIFICATIONS I Amplifier section Continuous average power output of 80 watts* per channel, min., at 8 Ohms, from 20 Hz to 20,000 Hz with no more than 0.09 %** total harmonic distortion (front). Continuous power output (When using SURROUND MODE) Rear only driven .
Een belangrijk punt na aankoop van elk apparaat Pioneer VSX-452 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Pioneer VSX-452 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Pioneer VSX-452 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Pioneer VSX-452 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Pioneer VSX-452 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Pioneer VSX-452 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Pioneer VSX-452 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Pioneer VSX-452 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
