Gebruiksaanwijzing /service van het product SW-501 van de fabrikant Planet Technology
Ga naar pagina of 20
.
T rademarks Copyright PLANET T echnology Corp. 2002. Contents subject to revision without prior notice. PLANET is a registered trademark of PLANET T echnology Corp.
- 2 - user ’ s guide, may cause harmful in terference to radio communications. Operation of this equipment in a re sidential area is likely to cause harm- ful interference, in which case the us er will be required to correct the in- terference at his own expense.
Table of Contents CHAPTER 1 IN TRODUCTION ................................................... 1 F AST E THERNET T ECHNOLOGY .................................................................. 1 S WITCHING T ECHNOLOGY ...................................
About This Manual Congratulations on your purchasing of SW-501/SW -801, 5/8-port 10/100Mbps Fast Ethernet Switch. This device integrates 100Mbps Fas t Ethernet and 10Mbps Ethernet net w ork capabilities in a highly flexible desktop package. Purpose This manual discusses how to install your SW-501/SW-801, 5/8-port 10/100Mbps Fast Ethernet Switch.
Overview of this User ’ s Manual Chapter 1, Introduction . Describes the Switch and its features. Chapter 2, Unpacking and Setup . Helps you get started with the basic installation of the Switch. Chapter 3, Identifying External Components . Describes the front panel rear panel and LED indicators of the Switch.
- 1 - Chapter 1 Introduction This chapter describes the features of the Switch and some background information about Ethernet/Fast Ethernet switching technology . Fast Ethernet Technology The growing importance of LANs and the increasing complexity of desktop computing applications are fueling the need for high performance networks.
- 2 - segments. The switch, without interfering w ith any other segments, auto- matically forwards traffic that needs to go from one segment to another . By doing this the total network capacity is multiplied, w hile still maintaining the same network cabling and adapter cards.
- 3 - As all ports support 200Mbps, the Sw itches can be cascaded from an y port and to any number of switches. The Switches are a perfect choice for site planning to upgrade to Fast Ethernet in the future.
- 4 - Chapter 2 Unpacking and Setup This chapter provides unpacking and se tup information for the Switches. Unpacking Open the shipping cartons of the Switch and carefully unpacks its contents.
- 5 - Chapter 3 Identifying External Components This section identifies all the majo r external components of the hub. Both the front and rear panels are shown followed by a description of each panel feature. The indicator panel is described in detail in the next chapter .
- 6 - DC Power Jack: Power is supplied through an external AC pow er adapter . Check the printing on the adapter for informa t ion about the AC power in- put voltage. Sin ce the switch does not includ e a power switch, plugging its power adapter into a pow er outlet will immediately power it on.
- 7 - Chapter 4 Connecting The Switch This chapter describes how to connect the Switch to your Fast Ethernet network. PC to Switch A PC can be connected to the Switch via a two-pair Catego ry 3, 4, 5 UTP/STP straight cable. The PC (equipped with a RJ-45 10/1 00Mbps phone jack) should be connected to any of the 5/8 numbered port.
- 8 - Switch to switches (other devices) The Switch can be connected to another switch or other devices (routers, bridges, etc.) via a two-pair Category 3, 4, 5 UTP/STP straight or crossover cable.
- 9 - Chapter 5 TECHNICAL SPECIFICATIONS Standards IEEE 802.3 10Ba se-T Ethernet IEEE 802.3u 100 Base-TX Fast Ether net Protocol CSMA/CD Data T ransfe r Rate Ethernet: 10Mbps (half duplex ), 20Mbps (full dup lex) Fast Ethernet: 100Mbps (hal f duplex), 200Mbps ( full duplex) T opology Star Network Cables 10BASET : 2-pair UTP Cat.
- 10 - Appendix A RJ-45 PIN Specification When connecting your 10/100Mbps Ethernet Switch to another switch, a bridge or a hub, a straight or crossover cable is necessary . Each port of the Switch supports auto-MDI/MDI-X detecti on. That means you can directly connect the Switch to any Ethernet devices without making a crossover cable.
- 1 1 - There are 8 wires on a standard UTP/S TP cable and each wire is color-coded. The following shows the pin allocation and color of str aight cable and crossover cable connection: Figure A-1: Str.
- 12 - Appendix B SWITCH OPERATION Address Table The Switch is implemented with an address table. This address table composed of many entries. Each entry is used to store the address infor- mation of some node in network, including MAC address, port no, etc.
- 13 - packet header , searches the rout ing t able provided for the incoming port and forwards the packet, only if required . The fast forwarding makes the switch attractive for connecting servers directly to the network, thereby increasing throughput and availability .
2010-000014-000.
Een belangrijk punt na aankoop van elk apparaat Planet Technology SW-501 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Planet Technology SW-501 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Planet Technology SW-501 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Planet Technology SW-501 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Planet Technology SW-501 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Planet Technology SW-501 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Planet Technology SW-501 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Planet Technology SW-501 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
