Gebruiksaanwijzing /service van het product U5-432 van de fabrikant PLUS Vision
Ga naar pagina of 70
U5-432 / U5-332 F R E E Z E M U T E L A S E R A U T O T IM E R R G B V ID E O R-CLICK/ CAN CEL Q U IC K M E N U E N T E R S T A N D B Y Q 12 3 4 VOL ZOO M STANDBY STATUS STANDBY AUTO SOURCE IMPORT ANT * DLP™ (Digital Light Processing) and DMD (Digital Micromirror De vice) are registered trademarks of T exas Instru- ments Incorporated (U.
E-2 Precautions Please read this manual carefully bef ore using your PLUS Data Projector and keep the man ual handy for future ref erence. This manual is f or both the U5-432 and U5-332. The U5-432 and U5-332 are identical in appearance, but ha ve different B/W mode functions .
E-3 Important Safeguards These saf ety instructions are to ensure the long life of the unit and to pre vent fire and shock. Please read them carefully and heed all warnings. Installation • For best results , use the unit in a darkened room. • Place the unit on a flat, le vel surf ace in a dry area awa y from dust and moisture.
E-4 Major Featur es 䡵 Lightweight high-intensity pr ojector The synergy of the DLP™ (Digital Light Processing) displa y system and our own optical design serve to improv e the optical utilization efficiency . The three primar y colors (RGB) required in color expression are reproduced with one DMD (Digital Micromirror De vice of high precision).
E-5 T able of Contents IMPORT ANT SAFETY INFORMA TION ................................................................................... E-2 Major Features ..............................................................................................
E-6 T ab le of Contents Color .......................................................................................................................... ............ E-49 Quick Color Adj. ...............................................................
E-7 Checking the Supplied Accessories Remov e the main unit and the accessor ies from the box and chec k that the following items are included. Wireless remote control unit with laser pointer [1] / Size AAA batteries [2] This controls the projector . (See P age E-11.
E-8 Storage case (for pr ojector and accessories) [1] This case is designed to hold the projector itself and its acces- sories. Use it when storing the projector .
E-9 Names of the Main Unit Parts STANDBY STATUS STANDBY AUTO SOURCE Adjuster button [E-27] (Also on opposite side) Focus ring [E-27] Exhaust vents Adjusters [E-27] Lamp cov er [E-65] V entilation slots Lens cap Remov e bef ore use. Attach the lens cap after use to protect the lens.
E-10 Names of the Main Unit P arts STANDBY STATUS STANDBY AUTO SOURCE RGB S VIDEO VIDEO AUDIO MOUSE PC CONTROL RGB S VIDEO VIDEO AUDIO MOUSE ST ANDBY STATUS ST ANDBY AUTO SOURCE PC CONTROL ST ANDBY in.
E-11 Names of the Remote Control Parts/Pr eparing the Remote Control Refer to the description (and diagram) f or the remote control unit included with y our projector .
E-12 Names of the Remote Control P ar ts/Preparing the Remote Control Inserting the Batteries When using the remote control f or the first time, install the batteries that were supplied. 2 Insert the batteries to match the "+" and " – " as indi- cated inside the compartment.
E-13 Remote Control Range P oint the infrared transmitter of the remote control toward the remote control sensor located at the front or rear of the main unit and operate. Reception of the remote control signal should generally be possible within the r ange illustrated below .
E-14 The Pr ocedur e Up to Pr ojecting to the Scr een P erform setup adjustments in the following order . 1 Position the pr ojector Determine the locations to set up the screen and the projector. See “ Placement Guide ” on P age E-15. 2 Connect the video equipment and personal computer Connect your equipment to the pr ojector .
E-15 Placement Guide • The projection distance o ver which focussing is adjustable is 1.20 m (3.94 f eet) to 13.81 m (45.31 feet). The pr ojector should be placed within this range.
E-16 Placement Guide * There is a tolerance of ±5% due to design v alues. * This table uses the lens ape x and lens center as references and requires that the projector be in a horizontal condition (with front and rear adjusters fully withdra wn).
E-17 Placement Guide Installation Height of Projection Screen [Reference] Once the installation location and position hav e been decided, the projection height should be check ed. In the case of large screen sizes, there are instances where the image cannot be projected within the floor to ceiling height.
E-18 Connecting Personal Computers and V ideo Equipment Connecting this unit with a personal computer permits presentation data to be pr ojected as a large screen display at conferences, lectures, and on other occasions.
E-19 Connecting P ersonal Computer s and Video Equipment T o Output the External Output Signal of a Notebook Computer When projection will be with a notebook computer connected, knowledge will be required f or the cable connection and notebook computer startup procedure as well as the operation that follo ws notebook star tup.
E-20 VIDEO S-VIDEO Connecting P ersonal Computer s and Video Equipment Connections with Composite Signals Video Equipment with VIDEO Connectors • Make the connection to the VIDEO connector of the projector using the supplied Video cable.
E-21 Cr Cb Y Pr Pb Y COMPONENT COMPONENT Connecting P ersonal Computer s and Video Equipment Connections with Component Signals When the Video Equipment Has a YCbCr Connector or YPbPr Connector • Th.
E-22 Connecting P ersonal Computer s and Video Equipment * Mak e the connection to the projector ’ s A UDIO jack using the supplied audio cab le. When the audio jack of the equipment that is to be connected is of the RCA phono type, mak e connection via the supplied audio conversion cab le.
E-23 Power Cable Connections and Switching the Power On/Of f STAN D BY S TAT U S STANDBY AUTO SOURCE RGB S VIDEO VIDEO AUDIO MOUSE PC CONTROL There is an order in whic h the power cable is connected and the po wer is switched on/off . Operating 1 Connect the A C IN connector of the projector and the po wer outlet using the supplied po wer cable .
E-24 When [Menu Language Select] is Displayed Upon Switching On the Power The first time the power is s witched on after purchase, [Menu Lan- guage Select] will be displa yed. Follo w the procedure described be- low and select the displa y language of the projector.
E-25 P ower Cab le Connections and Switching the P ower On/Off Finishing 1 Switch off the power of the connected equip- ment 2 Switch off the power of the pr ojector Press the ST ANDBY button.
E-26 Adjustment of the Pr ojection Scr een Switch on the power of the connected equipment and make the adjustments with the video signal being input to the projector . Adjustment of the Pr ojection Screen 2 (2) (1) (3) (4) (5) (3) (4) T urn the zoom ring to adjust the screen size of the pr ojection image.
E-27 Adjustment of the Projection Screen STA N DBY STATU S STANDBY AUTO SOURCE ( 1 ) ( 1 ) ( 2 ) 3 T urn the f ocus ring and adjust the focus of the screen Making Adjustments with the Adjusters While .
E-28 General Operation This section describes the use of direct operation with the main unit or remote contr ol buttons. For information about operation using the men u, see “ Menu Operation Method ” on P age E-40 and the various items on P ages E-47 to E-60.
E-29 General Operation Automatic Adjustment This function automatically adjusts the position shift, screen size , vertical str ipes, and color infidelity of the projected analog RGB input signal. Normally automatic adjustment is performed at the time of signal selection.
E-30 Fr eezing a Moving Picture This function is used to stop and view a mo ving picture. Note that the input image continues to adv ance ev en though the picture there is a still picture condition. A press of the FREEZE button c hanges the screen to a still picture .
E-31 General Operation Adjustment of the V olume This function adjusts the v olume of the built-in speaker . (1) Press the 왖 or 왔 VOL b utton to adjust the volume. The v olume adjustment display appears when one of the b uttons is pressed. (2) Press the CANCEL b utton to immediately c lose the display .
E-32 General Operation Enlargement of the Image and V ideo Movement This function digitally enlarges the personal computer image and video image. (1) Press the ZOOM b utton to enlarge the image. The zoom displa y appears when the ZOOM button is pressed.
E-33 General Operation Using the Presentation Timer Note: * The timer display will be closed while the menu or the quick menu is displayed, and while a message is displayed; however , the timer will still be operating at such times. Also, the timer will not be displayed unless a signal is being input.
E-34 General Operation Using the Laser Pointer The remote control unit ’ s laser pointer can be used to point to the section currently being e xplained, making presenta- tions more effective. Operation The red laser beam is emitted from the tip of the remote control unit while the LASER button is pressed in.
E-35 General Operation Performing Mouse Operations on the Computer with the Remote Contr ol Unit When a computer and the projector are connected, mouse operations can be performed on the computer using the projector ’ s remote control unit.
E-36 General Operation Controlling the Pr ojector from a Computer Use the control connector if the pr ojector cannot be operated with the remote contr ol unit, f or example when it is suspended from the ceiling.
E-37 General Operation Pr otecting the Projector with the Security Lock A passw ord can be registered and the security loc k set in order to protect the pr ojector from unauthorized use. Registering the passw ord The pass word is registered using the menus.
E-38 General Operation If the passw ord input displa y appears when the power is turned on When a pass word has been registered, the “ P assw ord ” input window appears on the projected image when the power is turned on. The projector continues projecting this image until the correct pass word is input.
E-39 General Operation Using the Quick Menu This function permits frequently used adjustments to be performed quickly . Note that the Quick Menu will not be displa yed unless the signal of the con- nected equipment is input. Please select the input that you wish to adjust.
E-40 FREEZE MUTE LASER AUTO TIMER VOL ZOOM RGB VIDEO QUICK STANDBY Q 12 34 R-CLICK/ CANCEL MENU ENTER Menu Operation Method • This section describes only the men u operation method. Please see this item should you need inf ormation while performing menu operations.
E-41 Menu Operation Method Menu Screen Names and Functions Menu Name This is the title of the menu. There is a change to the title screen when the menu is selected. The cursor mov es to the selected menu name. Cursor (Deep Blue) This permits setting/adjustment of the item located at the cursor position.
E-42 Menu Operation Method Performing Menu Operations • Only “ Setup ” , “ Options ” and “ Info. ” can be selected when no signal is being input. • The menu displa y will close if, after pressing a button, the next button operation is not made within 30 seconds.
E-43 3 Press the 왔 SELECT button to display the item name selection cursor . Displaying the Cursor This condition al- lows selection of the item name.
E-44 Menu Operation Method 6 Press the MENU button and close the menu display Closing the Menu FREEZE MUTE LASER AUTO TIMER RGB VIDEO R-CLICK/ CANCEL QUICK ENTER STANDBY Q MENU Selecting Another Menu Name with Remote Contr ol Operation When a sub menu is displa yed, press the CANCEL but- ton and close the sub menu.
E-45 List of Item Names Of fering Input Selection and Adjustments/Settings The item names that can be adjusted/set will differ depending on the input signal.
E-46 RGB Component VIDEO S-VIDEO Menu name Setup Info. Auto Source E-54 嘷嘷嘷嘷 Color B/W Switching E-54 嘷嘷嘷嘷 Item Name Reference Page Sub Menu Item Name Auto Power Off E-54 嘷嘷嘷嘷 .
E-47 Image • P erform this operation while pr ojecting the picture for which the adjustment/setting will be made. • Select the menu name “ Ima ge ” . See “ Menu Operation Method ” on Page E-40 f or information about perf orming menu operations.
E-48 Fine Picture Adjust this when the picture shows a lac k of color fidelity or flick ering. Select the “ Fine Picture ” item name and adjust with the SELECT 왗왘 buttons so that the lack of color fidelity or the flic kering disappears. Image H Position Adjust this when the picture is shifted to the left or right.
E-49 Color • Do the f ollowing operation while displaying the ima ge you want to adjust or set. • Select the menu name “ Color ” . See “ Menu Operation Method ” on Page E-40 f or information about perf orming menu operations. The item name displa y will differ depending on the input signal.
E-50 Color Color T emp. The screen color is affected b y the color of the illumination and other extraneous light. This function adjusts the white, which is the reference color f or video equipment, and impro ves the quality of color reproduction. Adjustment can also be used to enhance skin colors.
E-51 White Balance This function automatically adjusts the b lack le vel and the white level of the analog RGB input signal to suit the personal computer . 1 Select the item name [White Balance] and press the ENTER button. The display will change to [Input Blac k Signal].
E-52 V iew • P erform this operation while pr ojecting the picture for which the adjustment/setting will be made. • Select the menu name “ Vie w ” . See “ Menu Operation Method ” on Page E-40 f or information about perf orming menu operations.
E-53 V ertical Flip / Horizontal Flip In selecting the method of pr ojecting to the screen, these functions are set when the projector is in a suspended or a rear screen installation. Select the item name “ V er tical Flip ” or “ Horizontal Flip ” and select the setting contents with the SELECT 왗왘 b uttons.
E-54 Setup • Select menu name “ Setup ” . See “ Menu Operation Method ” on Page E-40 f or information about perf orming menu operations. The item name displa y will differ depending on the input signal. See “ List of Item Names Offering Input Selection and Adjustments/Settings ” on P age E-45.
E-55 Setup Menu Position This function sets the display position of the men u. Select item name “ Menu P osition ” and select the setting contents with the SELECT 왗왘 buttons.
E-56 Setup Input Format This function is used in setting the input signals of the input connec- tors. Normally , this should be set to Auto. When identification is not possible with Auto, make the setting. Select the item name “ Input F or mat ” , press the ENTER button, and the sub menu will open.
E-57 Option • Select menu name “ Option ” . See “ Menu Operation Method ” on Page E-40 f or information about perf orming menu operations. The item name displa y will differ depending on the input signal. See “ List of Item Names Offering Input Selection and Adjustments/Settings ” on P age E-45.
E-58 Startup Screen This is the selection of whether or not to displa y the logo screen at startup time . Select item name “ On Screen ” and select the setting contents with the SELECT 왗왘 buttons . Logo ........... Displays the logo. Blank ...
E-59 Info. • Select menu name “ Inf o. ” . See “ Menu Operation Method ” on Page E-40 f or information about perf orming menu operations. The item name displa y will differ depending on the input signal. See “ List of Item Names Offering Input Selection and Adjustments/Settings ” on P age E-45.
E-60 Resolution / Frequency This function displays the resolution and frequency of the detected in- put signal. Info. Lamp Timer This displays the lamp timer . This projector has an Eco mode function. The lamp lif e will differ between Normal mode and Eco mode.
E-61 When an Indicator is Lit or Flashing ST ANDBY STATUS ST ANDBY AUTO STATUS ST ANDBY STATUS ST ANDBY STATUS ST ANDBY STATUS ST ANDBY STATUS ST ANDBY The indicators on the pr ojector ’ s control panel light or flash to notify of pr oblems, as described below .
E-62 T r oubleshooting Check the following matters before r equesting servicing. • Is the power cord plugged into a po wer outlet? • Is the lamp cov er properly mounted? • Is the projector ’ s temperature high? T o protect the projector, the po wer can- not be tur ned on when the projector ’ s temperature is abnor mally high.
E-63 Cleaning • Be cer tain to disconnect the power plug from the po wer outlet before cleaning. • Do not spra y or otherwise expose the projector , lens, or screen to volatile substances such as insecticides. Do not lea ve rubber or vinyl products in contact with the projector f or long per iods.
E-64 Replacing the Lamp Cartridge • The lamp that is used as a light sour ce in the projector has a limited service life. The rated service life of the lamp is about 2000 hour s (when used in normal mode only). This could be shortened depending on conditions of use and other factors.
E-65 Replacing the Lamp Cartridge Preparations: T ur ning the projector upside-down on top of a soft cloth, etc., so that it does not get scratched mak es it easier to replace the lamp car tridge. T ur n the projector right-side up after replacing the lamp car tr idge.
E-66 Replacing the Lamp Cartridge 5 Mount the new lamp cartridge . (1) Push the lamp car tr idge in slowly . (Line it up with the screw holes in the projector .) 6 Mount the lamp cover . (1) Set the tip of the lamp cover in place , then close the lamp cov er .
E-67 Specifications Model U5-432/U5-332 Optical Method of projection : DLP ™ (single chip DMD) DMD 0.7 inches 1024 ⳯ 768 dots Lamp 200 W high pressure mercury lamp Projection lens : Man ual zoom ( ⳯ 1.2), Man ual focus F = 2.4 – 2.6, f = 26.5 – 31.
E-68 T able of Supported Frequency The projector automatically identifies the signal input from the computer and selects the optimum resolution as sho wn on the ta bl e below . Manual adjustments ma y be required f or some input signals. See “ Picture Adj.
E-69 ST ANDBY STATUS ST ANDBY AUTO SOURCE Cabinet Dimensions Unit: mm (inch) 216 (8.5) 60 (2.4) 260 (10.2).
2004.
Een belangrijk punt na aankoop van elk apparaat PLUS Vision U5-432 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen PLUS Vision U5-432 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens PLUS Vision U5-432 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding PLUS Vision U5-432 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over PLUS Vision U5-432 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van PLUS Vision U5-432 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de PLUS Vision U5-432 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met PLUS Vision U5-432 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
