Gebruiksaanwijzing /service van het product 4020 van de fabrikant Polycom
Ga naar pagina of 60
Polycom ® KIRK ® 4020/4040 User Guide 1408 8700-ed9:1408 8700-ed9.qxd 03-10-2008 11:11 Side 1.
Congratulations on your new KIRK handset Your new KIRK handset will provide you with the greatest possible degree of flexibility and mobility due to high battery capacity, low weight, practical size and design.
Contents: 1. Construction .......................................................................... 4 2. Battery installation ................................................................ 5 3. Charging .............................................
1. Construction 4 Key for internal calls (not used on KIRK Wireless Server) Loud speaking (only KIRK 4040) Keyboard LOCK (Menu*) MENU key Display with backlight Recall key (MAIL key) SILENT (Menu#) ON/OFF HOOK key- also used as turn on key CONFIRMATION key - MUTE microphone.
2. Batter y installation The battery is connected to the handset when it is shipped from the factory. To change the battery you must unscrew the plate on the rear of the handset to access the battery compartment. 5 To remove the battery cover, use a normal screw driver.
3. Charging During normal operation, it takes approximately 3 1/2 hours to charge the handset from fully discharged to its full capacity. Place the handset in the charger. When the handset is turned on, the display shows the charging status in line 3.
7 4. Key Functions The handset has 21 keys: Two keys are placed at the right side for volume control. Press upper or lower key to change the volume. Each key-press turns volume one step up/down. “MENU” - Go to menu structure or exits the menu structure.
8 “INT” - If residential systems: Internal calls off hook (not used on KIRK Wireless Server) Turns loudspeaking on and off in off hook (only KIRK 4040) “R” - If off hook: Recall.
9 5. T urning the handset ON/OFF ON: Press -key for 1/2 second. When the handset is turned on the symbol is shown in the lower left corner of the display, if the handset is subscribed to a system.
10 6. Making a call For making or receiving calls the handset has to be subscribed to a system ( shown in display) (see Chap. 7.5.1). Press the -key, the -icon in the display will flash until connection is established. Dial the number. Pre-dial: Press the number to dial (long press on ✱ will make a pause, if necessary).
11 Redial: Redial / CLIP (CLIP = Calling Line Identification Presentation) stack: Press the < -key (REDIAL) to enter the redial/CLIP stack. Search for the number by using the < or > -keys, re.
Please note: If the Date and Time function is supported, then date and time of the incoming or outgoing call is shown in the CLIP/Redial stack on the 4th line of the display. See Chap. 8 for more information. Speed dial: See Chap. 7.12 and Chap. 10 for more information about speed dialing.
6.2 During conversation 6.2.1 Volume regulation: Use the two keys placed at the right side of the handset for volume control. 6.2.2 Microphone mute: Press the -key (MUTE), “MIC. MUTED” is showed in the display. Press the -key (MUTE) to enable the microphone again.
14 7. Menu structure Pressing the MENU-key, enters or exits the menu structure. It has to be used if a “NO” or “CLEAR” is wanted in the menu structure. Pressing the -key, jumps to a lower level in the menu. When the lowest menu level is reached, it will store the setting and jump to a higher level.
15 7.1 Using the alphanumeric keyboard The normal dialling keys (0-9) are used for writing the name to be placed in the telephone book. By pressing the keys a certain number of times the related letters or digits will appear in the display. Spaces are made by using the 0-key.
16 7.2 The key functions Key Capital letter Small letter 1 ? ! 1 - + * / = & ( ) % ¿ ¡ ? ! 1 - + * / = & ( ) % ¿ ¡ 2 A B C 2 Ä Å À Á Ã Æ Ç a b c 2 ä å à á ã æ ç 3 D E F 3 È .
17 7.3 Profile set-up To set-up the handset press MENU. You are now able to switch between the different settings. Press when you find the setting you wish to change (or see). Change the setting according to your needs, confirm with and you automatically go to the next setting.
18 Profile set-up (fig) KIRK telecom SET PROFILE ADVANCED SET PROFILE RINGER TONE SET PROFILE RINGER VOL SET PROFILE KEY CLICK SET PROFILE VIBRATOR SET PROFILE B-ANSWER SET PROFILE START VOLUME SET PROFILE OUT OF RANGE ADVANCED RINGER TONE 1,2........
19 7.4 Profile functions R INGERTONE : Scroll through the 9 different ringertones using < and >. Confirm with . R INGER VOL : Turn the volume up and down using < and >. Confirm with . K EY CLICK : Turn the volume up and down using < and >.
20 O UT OF RANGE : The out of range indication can be turned on/off using < and >. Confirm with . With the out of range indicator turned on, a beep will appear when the telephone is moving out of range of the base station, and “OUT OF RANGE” will appear in the display.
21 7.5 Menu subscription and login Password is factory set at 0000 SELECT LOGIN SYSTEM 1 123456789015 CREATE SEARCH ID: 123456789012 CREATE SYSTEM 2 MENU LOGIN MENU SELECT LOGIN SUBSCRIPTION CREATE SUBSCRIPTION REMOVE REMOVE? PASSWORD _ _ _ _ _ SUBSCRIPTION REMOVE 123456789015 REMOVE SYSTEM 2 SUBSCRIPTION REMOVE 1408 8700-ed9:1408 8700-ed9.
22 7.5.1 Create subscription To make subscriptions, the system must allow subscriptions to be made. Some systems also require an Access Code (AC). If more than one system currently permits subscription, you will need to know the ID of the system to which you wish to subscribe.
23 7.5.2 Login The handset can be subscribed to 10 different systems enabling you to use the same handset on 10 different systems. If you would like to change to another system, use the Login Menu to connect to another system number. The actual chosen system is marked with a ✱ .
24 7.5.3 Auto login The handset can be subscribed to 10 different systems. If a handset is subscribed to two or more systems, you can use Auto Login A to change between the systems auto- matically. The selected system is marked with an “A”. Please note: Auto login A should only be used in separate systems without overlaps.
If a handset is subscribed to two systems only, you can use Auto Login B to change between the two systems auto- matically. The selected system is marked with a “B”. Please note: Auto login B can be used in separate systems which are overlapping each other.
7.5.4 Remove subscription Subscriptions can be removed from the system in use and from the 9 other systems (if connected). Removing a sub- scription requires a password. Password is factory set at 0000. If the system in use is removed, it is necessary either to select one of the remaining systems or to subscribe to a new one.
27 7.6 Battery capacity In the Battery Menu it is possible to see the remaining battery capacity. For reading the correct capacity, the hand- set has to be removed from the charger for at least one hour. Press MENU and use the < or > keys to reach the Bat- tery Menu.
28 7.7 Redial The handset has maximum 10 redial numbers and 10 Caller ID/MISSED CALL numbers placed in the same stack. Each number is only represented once.
29 The Redial and CLIP stack Menu (fig) KIRK telecom REDIAL 75602850 CLIP 898 DELETE? 899 STORE NO.? 899 DELETE ALL? NAME: BILL GATES 899 < 1408 8700-ed9:1408 8700-ed9.
30 7.8 Book Storing a number (max. 24 digits) in the telephone book is done by pressing the number to be stored (in on hook), then press the > -key followed by the -key. The book can store up to 200 numbers with name. Typing of the name and a confirmation is required.
31 Read BOOK numbers: The telephone book is entered by pressing > (BOOK). For quick-search: press the first letter of the name (using 1-9)(see Chap. 7.2). Call the displayed person by pressing the -key. It is also possible to reach the Phone book Menu in the main menu.
32 7.9 External services External services are features placed in the main system, and only available if the handset is subscribed to a KIRK solution. Under External services can be found; “View Clip Stack”, “Delete Clip Stack” and “Local Phone Book”.
33 7.10 MSF Functions MSF Functions are special functions, which are based on MSF (Message Service Function). The functions require special software in the main system.
34 7.11 Mail/Text Messages Available in systems configured with the possibility of sending text messages At the reception of a text message the envelope icon appears in the display. The envelope icon is indicating one or more unread messages. The text message is shown in the display, and when the message is read the envelope icon will disappear.
35 Read a mail Press the R-key (MAIL) followed by the -key or enter the Mail Menu (in on hook condition). If the message includes more than 36 letters or digits, the message will run over 2 display screens. Use the > -key to scroll. To see the sender of the mail, press the -key.
36 Delete a mail Open the mail by pressing the R-key followed by the -key, press the -key again and use the < > -keys to find the delete feature, press the -key and the mail is deleted.
37 N25-01 04.38 308 Temp 45° .. L26-01 14.32 319 Hello, its me.. N28-01 15.46 236 FIRE ALARM.. WRITE NEW MAIL? √19-01 09.56 htj@kirktelec I am working.. Hello it’s me. Yo can meet me at 15 o’clock if you want to. DELETE MAIL? SENDER: 319 (UN)LOCK MAIL? REPLY MAIL? FORWARD MAIL? - - - - PHONENO: 236 E-MAIL: htj@kirktelecom.
38 7.12 Speed dial Please note: To use the speed dial function it is necessary to set “LONG KEY” to “SPEED DIAL” (see Chap 10). The speed dial list has maximum 11 speed dial numbers. Calling a number from the speed dial list is done by pres- sing the 0,1,2.
8. Date and Time Function The Date and Time function requires the use of a KIRK Wireless Server and special software in the main system. If the Date and Time function is supported, a clock is shown in the display. The clock shows the time with an accu- racy of +/- 1 minute.
40 9. Language There are 10 predefined languages in the handset: English, German, French, Italian, Spanish, Dutch, Portuguese, Swedish, Danish and Norwegian. Select the required language by pressing the -key. If an 11th language is present this will be shown.
41 10. Advanced settings A UTO HOOK : Can be turned on/off using < and >. Confirm with . When turned on, the handset automatically goes off hook when removed from the charger and a call is present. When placing the handset in the charger, the handset automatically goes on hook.
42 A. KEY DELAY : Used to define the time for how long the alarm key should be pressed before the alarm key function is executed. L SO NB - ANSWER : Can be turned on/off using < and >. Confirm with . When turned on and “B-ANSWER ON” (hands-free) is selected, the handset turns on the loudspeaker automatically (see Chap.
43 Advanced settings (fig) ADVANCED AUTO HOOK ADVANCED ANY KEY ANSW ADVANCED LONG KEY ADVANCED LONG KEY TIM ADVANCED A. KEY DELAY ADVANCED LS ON B-ANSW ADVANCED STANDBY TEXT ADVANCED HEADS. ALERT AUTO HOOK ON/OFF ANY KEY ANSW ON/OFF LONG KEY SEND MSF/ SPEED DIAL LONG KEY TIM 1,2.
44 11. Shor tcuts ”KEY LOCKED”: Press: MENU ✱ . (Display shows ) ”SILENT”: Press: MENU #. (No sounds) (Display shows ) “PHONE BOOK”: Press > (BOOK) in standby Name search in telephone.
45 12. Information 12.1 Error tree Problem Check The telephone freezes Remove and replace the battery pack. Press to turn on the telephone The telephone does not ring Check whether the ringer is SILENT or RINGER VOL.
46 12.2 Error information Improper function of the handset might be related to the installation of the KIRK solution or failures related to the main system. Before declaring a handset for repair be sure that the main system is operating properly. 12.3 Warranty The handset is covered by a normal warranty-solution, except the battery.
47 12.4. Technical information Approvals Acoustics: TBR10 Electrical: TBR6 (DECT RF) Access profile: TBR 22 (GAP) EMC: EN 301 489 -1/-6 EN 301 406 EN 60950-1 EN 50371 EN 61000-3-2 EN 61000-3-3 Size an.
This KIRK product has been marked with the CE mark. This mark indicates compliance with EEC Directives 89/336/EEC, 73/23/EEC 1999/5/EC. A full copy of the Declaration of Con- formity can be obtained from Polycom Ltd, 270 Bath Road, Slough, Berkshire, SL1 4DX, UK.
Eesti [Estonian]: Käesolevaga kinnitab Polycom (UK) Ltd seadme KIRK 4020 / 4040 handset vastavust direktiivi 1999/5/EÜ põhinõuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele sätetele.
prasībām un citiem ar to saistītajiem noteikumiem. Lietuvių [Lithuanian]: Šiuo Polycom (UK) Ltd deklaruoja, kad šis KIRK 4020 / 4040 handset atitinka esminius reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas.
51 relevantnimi določili direktive 1999/5/ES. Slovensky [Slovak]: Polycom (UK) Ltd týmto vyhlasuje, že KIRK 4020 / 4040 handset spĺňa základné požiadavky a všetky príslušné ustanovenia Smernice 1999/5/ES.
12.5.1 Important Safety Instructions Before using your telephone equipment, you should always follow basic safety instruction to reduce the risk of fire, elec-trical shock and injury to persons, and damage to property. 1. Read and understand all instructions.
11. Avoid using telephone during an electrical storm. There may be a risk of electrical shock from lightning. 12. Do not use the telephone to report a gas leak in the vicinity of the leak. 13. Do not place the base or charger near microwave ovens, radio equipment, or non-ground connected televisions.
Battery Precautions 1. Periodically clean the charge contacts on both the charger and handset. 2. Exercise care in handling batteries in order not to short the batteries with conducting materials such as rings, bracelets, and keys. The batteries or conducting material may overheat and cause burns or fire.
FCC Note: This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE EMC: Cet appareil a été soumis à un essai et jugé conforme aux normes régissant les limites établies pour un dis-positif numérique de classe B, conformé-ment aux règlements locaux.Ces limites visent à assurer une protection raisonna-ble contre des interférences pouvant nuire a l'appareil utilisé dans un secteur rési-dentiel.
12.5.2 Limited Warranty This limited, non-transferable warranty is provided to the original purchaser. The product is warranted to be free from defects in materials and workmanship under normal installation, use and service for a period of one (1) year from the date of purchase as shown on the purchaser's receipt.
is used in a country in which it is not registered for use, or if it is used in a country for which it was not designed. Due to varia- tions in telephone systems and communications laws, this product may be illegal for use in some countries.
1408 8700-ed9:1408 8700-ed9.qxd 03-10-2008 11:12 Side 59.
©2007 Polycom, Inc. All rights reserved. Specifications subject to change without notice. Polycom Headquarters 4750 Willow Road Pleasanton CA 94588 (T) Polycom (Denmark) Langmarksvej 34 DK-8700 Horsens Tel. +45 7560 2850 Fax +45 7560 2851 emeadk@polycom.
Een belangrijk punt na aankoop van elk apparaat Polycom 4020 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Polycom 4020 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Polycom 4020 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Polycom 4020 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Polycom 4020 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Polycom 4020 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Polycom 4020 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Polycom 4020 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
