Gebruiksaanwijzing /service van het product 402993 van de fabrikant Poulan
Ga naar pagina of 30
OPERA T OR'S MANU AL MODEL: XT19H42YT LA WN TRA CT OR AL W A YS WEAR EYE PR O TECTION DURING OPERA TION Visit our website: www .poulan-pro.com W ARNING: Read this Man u al and f ollow all W arnings and Saf ety Instructions. F ail ure to do so can re sult in serious in ju ry .
2 I. GENERAL OPERA TION • Read, understand, and f ollow all instructions on the machine and in the manual bef ore star ting. • Do not put hands or f eet near rotating par ts or under the machine.
3 • Be sure the area is clear of bystanders bef ore operat- ing. Stop machine if anyone enters the area. • Ne v er carr y passengers. • Do not mow in rev erse unless absolutely necessar y . Al ways look do wn and behind bef ore and while bac k- ing.
4 SAFETY RULES ............................................................ 2 PRODUCT SPECIFICA TIONS ....................................... 4 CUST OMER RESPONSIBILITIES ................................. 4 ASSEMBL Y ..................................
5 UNASSEMBLED P AR TS (2) Keys Slope Sheet Key (1) Oil Drain Tube ASSEMBL Y When right or left hand is mentioned in this man ual, it means when you are in the oper ating po si tion (seated be hind the steer ing wheel). T O REMO VE TRA CT OR FROM CAR TO N UNP A CK CART ON • Remove all accessib le loose par ts and par ts car tons from car ton.
6 ASSEMBL Y CHECK TIRE PRESSURE The tires on your tr actor were o v erinfl ated at the f actory f or shipping pur poses. Correct tire pressure is impor tant f or best cutting perf ormance. • Reduce tire pressure to PSI shown on tires . CHECK DECK LEVELNESS F or best cutting results, mo wer housing should be properly le v eled.
7 OPERA TION These symbols ma y appear on your tr actor or in literature supplied with the product. Lear n and understand their mean- ing. DANGER, KEEP HANDS AND FEET AWAY FREE WHEEL (Automatic Models.
8 OPERA TION KNO W Y OUR TRA CT OR READ THIS O WNER'S MANU AL AND SAFETY R ULES BEFORE OPERA TING Y OUR TRA CT OR Compare the illustrations with y our tractor to f amiliarize y ourself with the locations of v arious controls and ad just ments. Sav e this man ual f or future ref erence .
9 OPERA TION FIG. 4 The operation of any tractor can result in f oreign objects thr own into the e yes, which can result in severe e ye dam age. Al wa ys wear safety glass es or eye shields while operating y our tractor or per fo r m ing any ad just ments or repairs.
10 OPERA TION T O ADJUST MO WER CUT TING HEIGHT (See Fig. 8) The po si tion of the at tach ment lift le ver (A) de ter mines the cut ting height. • Put attachment lift le v er in desired cutting height slot. • Slide pointer tab (T) to desired cutting height as a reminder f or ne xt time y ou mow .
11 OPERA TION FIG. 11 T O WING CAR TS AND O THER A T TA C H MENTS T ow only the attachments that are recommended by and comply with specifi cations of the manuf acturer of your trac- tor . Use common sense when towing. T oo heavy of a load, while on a slope, is dangerous .
12 ADD GASOLINE • Fill fuel tank to bottom of fi ller nec k. Do not ov erfi ll. Use fresh, clean, regular un lead ed gasoline with a minimum of 87 octane. (Use of leaded gasoline will increase carbon and lead o xide deposits and reduce v alv e lif e).
13 FIG. 12 MO WING TIPS • Mower should be properly le v eled f or best mo wing per- f ormance. See “T O LEVEL MOWER HOUSING” in the Ser vice and Adjustments section of this manual. • The left hand side of mower should be used f or trim- ming. • Drive so that clippings are discharged onto the area that has been cut.
14 MAINTENANCE T R A C T 0 R Inspect Muffler/Spark Arrester Clean Air Filter Change Engine Oil (with oil filter) Replace Air Filter Paper Cartridge Replace Spark Plug Check Engine Oil Level Clean Engine Cooling Fins Clean Air Screen 1 - Change more often when operating under a heavy load or in high ambient temperatures.
15 MAINTENANCE FIG. 13 025 44 MANDREL ASSEMBL Y BLADE BLADE BOL T (SPECIAL) CENTER HOLE ST AR B A TTER Y Y our tractor has a batter y charging system which is suf fi cient f or normal use. Howe v er , per iodic charging of the batter y with an automotive charger will e xtend its life.
16 MAINTENANCE V- B E LT S Check V -belts f or deterioration and wear after 100 hours of operation and replace if necessary . The belts are not ad just able . Re place belts if they begin to slip from w ear . TRANSAXLE COOLING The transmission f an and cooling fi ns should be kept clean to assure proper cooling.
17 MAINTENANCE MUFFLER Inspect and replace corroded muffl er and spar k arrester (if equipped) as it could create a fi re hazard and/or dam- age. SP ARK PLUGS Replace spark plugs at the beginning of each mowing season or after e v er y 100 hours of operation, whiche v er occurs fi rst.
18 SER VICE AND ADJUSTMENTS T O REMO VE MO WER (See Fig. 17) • Place attachment clutch in “DIS EN GAGED” position. • Low er attachment lift le v er to its low est position. • Roll belt off engine pulley (M). • Remov e retainer spring (K), slide col lar (L) off and push housing guide (P) out of brac k et.
19 SER VICE AND ADJUSTMENTS • Slide mower out from under right side of tractor . IMPORT ANT : If an attachment other than the mo wer dec k is to be mounted on the trac tor , remov e the front link (E) and rear lift liks (C) from tractor . A B C D FIG.
20 SER VICE AND ADJUSTMENTS 02966 A A 02548 B B PRECISION SIDE-T O-SIDE ADJUSTMENT (See Fig. 23) • With all tires properly infl ated, park tractor on le v el ground or drive w a y . CA UTION: Blades are sharp. Protect y our hands with gloves and/or wrap blade with hea vy cloth.
21 SER VICE AND ADJUSTMENTS NO TE: Each full turn of the adjustment nut will change mower height about 1/8". • Recheck measurements, adjust if necessary until front tip of blade is 1/8" to 1/2" lo wer than the rear tip . • Hold adjustment nut in position with wrench and tighten jam nut securely against adjustment nut.
22 SER VICE AND ADJUSTMENTS FIG. 28 RE TA I N ING RING WA S H ERS SQU ARE KEY (REAR WHEEL ONL Y) AXLE CO VER T O ST ART ENGINE WITH A WEAK BA TTER Y (See Fig. 29) WA R N I N G : Lead-acid batteries gen- er ate ex plo sive gases. Keep sparks, fl ame and smoking ma te ri als awa y fr om bat ter ies.
23 SER VICE AND ADJUSTMENTS FIG. 30 T O REPLACE HEADLIGHT B ULB • Raise hood. • Pull bulb holder out of the hole in the bac kside of the grill. • Replace b ulb in holder and push bulb holder securely back into the hole in the bac kside of the grill.
24 ST ORA GE Immediately prepare your tr actor f or storage at the end of the season or if the tractor will not be used f or 30 da ys or more. W ARNING: Never store the trac tor with gas o line in the tank inside a building where fumes may reac h an open fl ame or spark.
25 TR OUBLESHOO TING POINTS Will not start 1. Out of fuel. 1. Fill fuel tank. 2. Engine not “CHOKED” properly . 2. See “T O ST ART ENGINE” in Operation section. 3. Engine fl ooded. 3. W ait sever al minutes bef ore attempting to star t. 4. Bad spark plug.
26 TR OUBLESHOO TING POINTS Engine dies when 1. Re v erse operation system 1. T ur n ignition key to tractor is shifted (ROS) is not "ON" while ROS "ON" position. into reverse mower or other attachment See Operation section. is engaged.
27 LIMITED W ARRANTY The Manuf acturer warr ants to the original consumer purchaser that this product as manufactured is free from def ects in materi- als and work man ship.
28 15 DEGREES MAX. FO LD ALO NG DOTTED LINE THIS IS A 15 DEG REE SLO PE ONLY RIDE UP AND DOWN HILL, NOT ACROSS HILL SUGGESTED GUIDE FOR SIGHTING SLOPES FOR SAFE OPERATION WARNING: To avoid serious injury, operate your tractor up and down the face of slopes, never across the face.
29 NO TES.
30 This product has been exper tly en gi neered and carefully manu fac tured to r igid quality stan dards. As with all mechanical products, some adjustments or par t replacement ma y be necessar y during the life of y our unit.
Een belangrijk punt na aankoop van elk apparaat Poulan 402993 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Poulan 402993 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Poulan 402993 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Poulan 402993 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Poulan 402993 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Poulan 402993 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Poulan 402993 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Poulan 402993 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
