Gebruiksaanwijzing /service van het product CTM-MS2 van de fabrikant Premier Mounts
Ga naar pagina of 22
INSTALLATION MANUAL CTM-MS2 Premier Mounts 3130 E. Miraloma Avenue Anaheim, CA 92806 Phone: (800) 368-9700 Fax: (800) 832-4888 mounts@mounts.com www.mounts.
PBL-110 Projector Mount Page - 2 - Installation Manual.
CTM-MS2 Installation Manual Page - 3 - Table of Contents Warning Statements ............................................................................................................ ............................ - 4 - Parts List ....................
CTM-MS2 Page - 4 - Installation Manual Warning Statements WARNING: THE WALL STRUCTURE MUST BE CAPABLE OF SUPPORTING 160 LBS. IF NOT, THE WALL STRUCTURE MUST BE REINFORCED. PROPER INSTALLATION PROCEDURE BY A QUALIFIED SERVICE TECHNICIAN, AS OUTLINED IN THE INSTALLATION INSTRUCTIONS, MUST BE ADHERED TO.
CTM-MS2 Installation Manual Page - 5 - Parts List NOTE: This wall mount is shipped with all proper ins tallation hardware and components. Make sure that none of these parts are missing an d/or damaged be fore beginning installation. If there are parts missing and/or damaged, please stop the in stallation and contact Premier Mounts (800-368-9700).
CTM-MS2 Page - 6 - Installation Manual M4 x 25 M5 x 20 M5 x 50 M8 x 20 M6 x 30 ( Qty 6) ( Qty 4) ( Qty 6) ( Qty 4) ( Qty 2) M4 x 16 (Qt y 8) ( Qty 8) M5 x 12 M5 x 16 ( Qty 6) M5 x 25 ( Qty 4) M6 x 12 .
CTM-MS2 Installation Manual Page - 7 - Nylon spacers and flat washers actual size NOTE : The nylon spacers may be stacked to achieve proper spacing. 1/ 4 " N yl o n spa c er s 5/16 " Fl at w.
CTM-MS2 Page - 8 - Installation Manual Thread Depth Indicator 1. Insert the thread depth indicator (supplied) throu gh the thread inserts found on the back of the flat panel to make sure the inserts measure the same full depth and mark it (Figure 1). 2.
CTM-MS2 Installation Manual Page - 9 - Mounting Bracket Installation NOTE : Proper installation procedure by qualified personnel as outlined in the install ation instructions must be adhered to. Failure to do so could result in serious personal injury an d possible damage to the flat panel.
CTM-MS2 Page - 10 - Installation Manual 3. Install the nylon spacers (if needed) to the mounting points on the flat panel (Figure 6). 4. Lay the left and right mounting brackets (stamped arrows facing out) - (Figure 7). Figure 6 Figure 7 5. Match the center of viewing guide with th e centerline you marked in Step 1 (Figure 8).
CTM-MS2 Installation Manual Page - 11 - L C Figure 8 Figure 9 7. The Griplates™ have M4, M5 M6 and M8 hole patterns to fit the hardware that your flat panel requires. EXAMPLE : If your plasma uses M8 x 20 Phillip screws. Use th e M8 mounting points (Figure 10).
CTM-MS2 Page - 12 - Installation Manual CTM-MS2 Installation 1. Using a (commercially available) wood stud finder, locate the 16" or 24" stud centers behind the wall (Figure 12). 2. Once found, make a pencil marking on the center of the wood studs (Figure 13).
CTM-MS2 Installation Manual Page - 13 - 4. Level the wall plate with the reference a rrow pointing up to the ceiling (Figure 15). 5. Drill six (6) ¼" pilot holes to the marked wall. 6. Secure the plate using the six (6) 5/16" lag bolts and flat washers (Figure 16).
CTM-MS2 Page - 14 - Installation Manual Installing the Flat Pa nel Display (CTM-MS2) WARNING : AT LEAST (2) QUALIFIED PERSONNEL ARE STRONGLY RECOMMENDED FOR INSTALLATION OF THIS PRODUCT. FAILURE TO DO SO COULD RESULT IN SERIOUS INJURY AND POSSIBLE DAMAGE TO THE FLAT PANEL.
CTM-MS2 Installation Manual Page - 15 - 2. Make any lateral shift adjustment and lock it by tightening the two (2) M6 x 30mm Phillips screws found on the bottom of the mounting brackets. Use the foot leveler to adjust your plasma. CAUTION : Do not over tighten the M6 x 30mm screws to the rods (Figure 18).
CTM-MS2 Page 16 Installation Manual Page 3. Tilt the flat panel and secure the two (2) M6 x 12 mm safety knobs to each of the mounting bracke ts (Figure 19).
CTM-MS2 Installation Manual Page 17 Technical Specifications 28.000 (171.2) 1 2 L C 16.000 (406.4) 24.000 (616.97) 8.000 (203.2) 8.000 (203.2) 19.000 (482.6) C L 21.000 (533.4) 12° 2.331 (59.21) 19.000 (482.6) A B C D E H G F G H A. Wall plate B. Mounting brackets C.
CTM-MS2 Page 18 Installation Manual Warranty Limited Lifetime Warranty All Premier Mounts products carry a limit ed lifetime warranty from ship date against defects in materials and workmanship. Premier Mounts is not liable for imprope r installation that result s in damage to mounts, adapters, display equipment or personal injury.
CTM-MS2 Installation Manual Page 19 Notes Premier Mounts 3130 E. Miraloma Avenue Anaheim, CA 92806 Phone: (800) 368-9700 Fax: (800) 832-4888 mounts@mounts.
AST-2446/2 Suspensio n Adapter Installation Instructions Page 1 AST-2446/2 INSTALLATION INSTRUCTIONS 1. Separate the upper pipe and lower tube. Install the upper pipe to the ceiling structure using commercial standards and commercially availabl e suitable hardware (Figure 1).
AST-2446/2 Suspensio n Adapter Page 2 Installation Instructions Figure 2 . Figure 3 ..
PSD-S Installation Instructions Page 1 PSD-S INSTALLATION INSTRUCTIONS 1. Separate the upper pipe and the lower tube. 2. Install the upper pipe in the ceiling stru cture using suitable commercial hardware. 3. Screw the lower portion of the PSD-S to th e coupling and secure with the Allen screws.
Een belangrijk punt na aankoop van elk apparaat Premier Mounts CTM-MS2 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Premier Mounts CTM-MS2 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Premier Mounts CTM-MS2 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Premier Mounts CTM-MS2 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Premier Mounts CTM-MS2 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Premier Mounts CTM-MS2 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Premier Mounts CTM-MS2 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Premier Mounts CTM-MS2 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
