Gebruiksaanwijzing /service van het product 400 GL van de fabrikant ProForm
Ga naar pagina of 30
Model No. PFTL414040 Serial No. CAUTION Read all precautions and instruc- tions in this manual before using this equipment. Save this manual for future reference.
T ABLE OF CONTENTS IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3 1. It is the responsibility of the owner to ensure that all users of this treadmill are adequately informed of all warnings and precautions. 2. Use the treadmill only as described. 3. Place the treadmill on a level surface, with at least eight feet of clearance behind it and two feet on each side.
21. When using iFIT.com programs, an elec- tronic “chirping” sound will alert you when the speed and/or incline of the treadmill is about to change. Always listen for the “chirp” and be prepared. In some instances, the speed and/or incline may change before the personal trainer describes the change.
5 Thank you for selecting the new PROFORM ® 400 GL treadmill. The PROFORM 400 GL treadmill combines advanced technology with innovative design to help you get the most from your exercise in the convenience of your home.
6 ASSEMBL Y Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant.
7 2. Identify the Right Handrail (72), which has a large hole in the left side. Feed the Upright Wire (42) into the hole in the bottom of the Right Handrail and out of the large hole in the side. Note: It may be helpful to use needlenose pli - ers to pull the Wire Harness out of the hole.
8 Small Hole 71 4. Hold the Console Base (47) near the Left Handrail (71). Attach the ends of the ground wires on the Console Base to the indicated small hole in the Left Handrail with the Silver Ground Screw (75). 47 75 Ground Wires 42 5. Touch the Right Handrail (72) to discharge any static.
9 9. Make sure that all parts are properly tightened before you use the treadmill. Note: Extra hardware may be included. Keep the included allen wrenches in a secure place. The large allen wrench is used to adjust the walking belt (see page 26). To protect the floor or carpet, place a mat under the treadmill.
OPERA TION AND ADJUSTMENT THE PRE-LUBRICATED WALKING BELT Your treadmill features a walking belt coated with high- performance lubricant. IMPORTANT: Never apply sil- icone spray or other substances to the walking belt or the walking platform. Such substances will deteriorate the walking belt and cause excessive wear.
1 1 CONSOLE DIAGRAM Note: If there is a thin sheet of plastic on the console, remove the plastic. Key Clip FEATURES OF THE CONSOLE The treadmill console offers an impressive array of features designed to help you get the most from your workouts.
12 HOW TO TURN ON THE POWER Plug in the power cord (see page 10). Locate the reset /off circuit breaker near the power cord. Make sure that the circuit breaker is in the reset position. Stand on the foot rails of the treadmill. Find the clip attached to the key (see the drawing on page 11) and slide the clip onto the waistband of your cloth es.
The left side of the dis- play will show the incline level of the treadmill, the elapsed time, the ap- proximate number of grams of carbs you have burned, and the distance you have walked or run. Note: Each time the incline changes, the display will show the incline setting for a few seconds.
14 HOW TO USE A PRESET PROGRAM Insert the key fully into the console. See HOW TO TURN ON THE POWER on page 12. Select one of the four preset programs. To select one of the four preset programs, press the Program Select but- ton repeat- edly.
Follow your progress with the display. See step 5 on page 12. Measure your heart rate if desired. See step 6 on page 13. Turn on the fan if desired. See step 7 on page 13. When you are finished exercising, remove the key from the console. When the program has ended, make sure that the incline of the treadmill is at the lowest set- ting.
Enter a maximum target heart rate setting. After you have entered a maximum speed setting, the letters “PLS” and the current maximum target heart rate setting of the program will appear in the display. Press the Heart Rate increase and de- crease buttons to change the maximum target heart rate setting (see EXERCISE INTENSITY on page 27) .
17 HOW TO CONNECT THE TREADMILL TO USE IFIT.COM PROGRAMS To use iFIT.com MP3 or CD programs , the treadmill must be connected to your MP3 player, CD player, portable stereo, home stereo, or computer. See pages 17 and 18 for connecting instructions. To use iFIT.
18 HOW TO CONNECT YOUR HOME STEREO Note: If your stereo has an unused LINE OUT jack, see instruction A below. If the LINE OUT jack is being used, see instruction B. A. Plug one end of a long 1/8” to RCA stereo audio cable (available at electronics stores) into the input jack on the console.
19 HOW TO CONNECT YOUR VCR Note: If your VCR has an unused AUDIO OUT jack, see instruction A below. If the AUDIO OUT jack is being used, see instruction B. If you have a TV with a built-in VCR, see instruction B. If your VCR is connected to your home stereo, see HOW TO CONNECT YOUR HOME STEREO on page 18.
20 If the speed or incline settings are too high or too low, you can manually override the settings at any time by pressing the Speed or Incline buttons on the console. However, when the next “chirp” is heard, the speed and/or incline will change to the next settings of the program.
21 HOW TO USE AN IFIT.COM PROGRAM DIRECTLY FROM OUR WEB SITE Our Web site at www.iFIT.com allows you to access basic programs, audio programs, and video programs directly from the internet. Additional options are s oon to be available. See www.iFIT.com for details.
22 THE INFORMATION MODE/DEMO MODE The console features an information mode that keeps track of the total number of hours that the treadmill has been operated and the total number of miles that the walking belt has moved.
23 HOW T O FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Before folding the treadmill, adjust the incline to the lowest position. If this is not done, the treadmill may be per- manently damaged. Next, unplug the power cord. CAUTION: You must be able to safely lift 45 pounds (20 kg) to raise, lower, or move the treadmill.
24 HOW TO LOWER THE TREADMILL FOR USE 1. Hold the upper end of the treadmill with your right hand. Press the storage latch to the left. Pivot the treadmill down until the frame and foot rail are past the storage latch. 2. Hold the treadmill firmly with both hands, and lower the tread- mill to the floor.
25 TROUBLESHOOTING Most treadmill problems can be solved by following the instructions below. If further assistance is needed, please call our Customer Service Department toll-free at 1-888-533-1333, Monday through Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays).
26 PROBLEM: The walking belt slows when walked on SOLUTION: a. Use only a single-outlet surge suppressor that meets all of the specifications described on page 10. b. If the walking belt is overtightened, treadmill perfor- mance may decrease and the walking belt may be- come damaged.
27 CONDITIONING GUIDELINES The following guidelines will help you to plan your ex- ercise program. For more detailed exercise informa- tion, obtain a reputable book or consult your physician.
P ART LIST—Model No. PFTL414040 R0205A Key No. Qty. Description Key No. Qty. Description Key No. Qty. Description 1 1 Hood 2 17 3/4” Screw 3 1 Motor Belt 4 1 Motor Tension Bolt 5 5 3/8” Washer 6.
EXPLODED DRA WINGÑModel No. PFTL414040 R0105A 72 2 2 2 2 31 48 48 2 29 44 2 48 48 28 10 49 12 19 13 13 60 23 13 12 14 21 16 18 17 14 15 74 16 82 83 87 15 96 86 15 95 92 38 92 38 93 81 58 83 82 58 79 .
Part No. 223703 R0205A Printed in USA © 2005 ICON IP, Inc. ORDERING REPLACEMENT P ARTS To order replacement parts, call our Customer Service Department toll-free at 1-888-533-1333, Monday through Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays).
Een belangrijk punt na aankoop van elk apparaat ProForm 400 GL (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen ProForm 400 GL heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens ProForm 400 GL vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding ProForm 400 GL leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over ProForm 400 GL krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van ProForm 400 GL bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de ProForm 400 GL kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met ProForm 400 GL . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
