Gebruiksaanwijzing /service van het product P2-USTIP1 van de fabrikant Raritan
Ga naar pagina of 52
USTIP P2-USTIP1, P2-USTIP2 Release 1.2 User Guide Copyright © 2006 Raritan Computer, Inc. PII-0J-E April 2006 255-30-6000.
This page intentionally left blank..
Copyright and Tradem ark Information This document contains proprietary inform ati on that is protected by copyright. All rights reserved. No part of this document may be phot ocopied, reproduced, or translated into another language without express prior written con sent of Raritan Computer, Inc.
Safety Guidelines To avoid potentially fatal shock hazard a nd possible damage to Raritan equipm ent: • Do not use a 2-wire power cord in any product configuration. • Test AC outlets at your computer and monitor for proper polarity and ground ing.
C ONTENTS i Content s Chapter 1: In troduction .................................................................. 1 USTIP Ov erview................................................................................................................. ......
ii USTIP U SER G UIDE Figur es Figure 1 Front and Rear Vi ews of the P2-USTIP .................................................................................. ....... 2 Figure 2 P2-USTIP1 Unit with Para gon UMTs .....................................
C HAPTER 1: I NTRODUCTION 1 Chapter 1: Introduction USTIP Overview Thank you for purchasing Raritan’s USTIP, th e industry-leading solution f or multi-platform, high-performance, network-based, remo.
2 USTIP U SER G UIDE Product Photos Figure 1 Front and Rear Views of the P2-UST IP Figure 2 P2-USTIP1 Unit with Paragon UMTs Figure 3 P2-EUST, P2-UST, and P2-USTIP1 Units.
C HAPTER 1: I NTRODUCTION 3 Product Features Access • Remote KVM access via the Internet, LAN/WAN, or dial-up modem • Up to two simultaneous user throughput to switch(es) or server(s) • Web brow.
4 USTIP U SER G UIDE Terminology This manual makes use of the following terms to indicate components of a typical USTIP configuration. While reading the manual, please refe r to the diagram below for clarification when necessary. Target Server(s) Servers to be accessed remotely via USTIP and its connected KVM configuration.
C HAPTER 2: I NSTALLATION 5 Chapter 2: Installation Configuring Target Servers Before installing USTIP, first configure any target servers that you wish to access via USTIP, in order to ensure optimum performance, as outlined below.
6 USTIP U SER G UIDE Windows 2000 / ME Settings On target servers running Microsoft Windows 200 0 / ME, set the mouse pointer acceleration to “none” and the mouse motion speed exactly to the middle speed setting. These parameter s are found in: Start → Settings → Control Panel → Mouse → Motion .
C HAPTER 2: I NSTALLATION 7 Note that KVM switch brands other than Rar itan’s may or may not properly handle PS/2-to- Sun signals. On target servers running the Solaris operating system, set the mouse acceleration value to exactly 1 and threshold to exactly 1.
8 USTIP U SER G UIDE Physical Connections Figure 5 P2-USTIP2 Rear Panel Connections Attaching a Local Console for Initial Configuration 1. Attach the included AC power cord to the USTIP unit and plug the other end into a nearb y AC power outlet. 2. Connect the client PC to the USTIP ADMIN Port using a serial (DB9) cable.
C HAPTER 2: I NSTALLATION 9 Initial Configuration During initial configuration, the USTIP Setup Wizard helps you quickly set up USTIP for the first time. The USTIP Setup Wizard appears only when accessing the Administrative Menus on a non-configured USTIP, and guides you through in itial configuration parameters.
10 USTIP U SER G UIDE Note: Network connections must be 10BASE-T or 100BASE-TX Ethernet − Line Speed & Duplex: Enter the visual efficiency for the monitor: Auto detect 10 Mbps/Full Duplex, 10 Mb.
C HAPTER 2: I NSTALLATION 11 C. Click OK. D. Click Termi nal Setup. In the Terminal Settings window, ensure the option Keypad application mode is checked (this option must be specified for most laptop computers).
12 USTIP U SER G UIDE Remote Connection Using Raritan Multi-Platform Client and Raritan Remote Client After installing USTIP, establish an initial ne twork connection using Raritan Multi-Platform Client (MPC) or Raritan Remote Client (RRC) .
C HAPTER 2: I NSTALLATION 13 Launch RRC Important: RRC works only with MS Internet Explorer. If you are us ing a different Web browser, MPC will load automaticall y. 1. Log on to any Windows-based computer with network access to USTIP. 2. If you are using Windows NT, 2000, XP, or 2003, ensure that you are not a “restricted” user.
14 USTIP U SER G UIDE Establish a Connection When you double-click on your USTIP icon, its l ogin screen appears. Log on wit h your username and password (default: admin/raritan ) to connect to your USTIP unit. Use the Navigator, on the left side of the MPC or RRC window, to select and connect to a server port.
C HAPTER 2: I NSTALLATION 15 Mouse Pointer Synchronizatio n When controlling a target server, MPC and RRC display two mouse cursors: one belonging to your client workstation and the other belonging to the target server. When properly configured, the two mouse cursors will align.
16 USTIP U SER G UIDE.
C HAPTER 3: O PERATIO N – A DMINISTRATIVE F UNCTIONS 17 Chapter 3: Operation – Administrative Functions Accessing the Administrative Functions Access and execute Administrative functions via local admin console, or via rem ote administration. Only administrators (users with administrative privileges) can access the U STIP Administrative Menus.
18 USTIP U SER G UIDE Remote Admin Console Another way to access USTIP administrative functions is to do so remotely, using MPC or RRC. Any administrative user logged on to USTIP at a Remote PC can perform administrative functions remotely to make changes to the s yst em, as long as USTIP is set to allow rem ote administration privileges.
C HAPTER 3: O PERATIO N – A DMINISTRATIVE F UNCTIONS 19 Network Configuration Use the TAB, Ç , or È ke y to highlight [C] Configure UST-IP on the Main Menu (or press C ) and press ENTER. At the Configuration Menu, select [N] Network Configuration and press ENTER.
20 USTIP U SER G UIDE Subnet Mask : Enter a Subnet Mask provided by your Network Administrator. Default Gateway : Enter the Default Gateway if your Network Administrator specifies one. • Enable Modem Interface: Enables Dial-up Modem access (default: YES).
C HAPTER 3: O PERATIO N – A DMINISTRATIVE F UNCTIONS 21 • If you set Port Priority to None, there is no capability to automatically terminate a user session. Instead, the first user to connect to eith er port maintains access to that port until the user is finished.
22 USTIP U SER G UIDE − YES (default): Allows remote access to all Ad ministrative USTIP Functions by administrators logged on at a Remote PC. • Logout idle users: Offers an option for USTIP to automa tically disconnect remote users after certain selected time interval s of inactivity have passed.
C HAPTER 3: O PERATIO N – A DMINISTRATIVE F UNCTIONS 23 Performance Settings Select [P] Performance Settings on the Configuration Menu to set up USTIP’s video data transfer and bandwidth parameters.
24 USTIP U SER G UIDE Time and Date Select [T] Time and Date on the Configuration Menu to view and adjust current date and time on the USTIP unit. Once saved, Time and Date ch anges will not take effect until USTIP is restarted. Figure 18 Time and Date Screen • New Date / New Time: To manually input changes to current date and time values.
C HAPTER 3: O PERATIO N – A DMINISTRATIVE F UNCTIONS 25 Access Control List Select [A] Access Control List on the Configuration Menu to set accessibil ity in the Access Control List (ACL) and allow or deny specific IP Ad dresses or ranges of IP Addresses to connect to the USTIP unit.
26 USTIP U SER G UIDE Remote Syslog Select [L] Remote Syslog on the Configuration Menu to all ow remote users to save the server logs. Use the Å and Æ keys to select Yes or No.
C HAPTER 3: O PERATIO N – A DMINISTRATIVE F UNCTIONS 27 View USTIP Status The USTIP Event Log screen shows a log file c ontaining i nformation about USTIP log i n and connection activities.
28 USTIP U SER G UIDE Restart or Shutdown the USTIP You can restart or shut the USTIP unit down from the Main Menu. Restart R , Shutdown S , or Cancel Esc the restart or shutdown command. R Restarts the USTIP unit and brings the USTIP Admin Console back to the USTIP Initialization screen.
A PPENDIX A: S PECIFI CATIONS 29 Appendix A: Specifications I TEM D IMENSIONS (W X D X H) W EIGHT P OWER P2-USTIP1 1U 19” Rackmount Case: 17.2” (W) x 11.46” (D) x 1.72” (H) 440mm (W) x 291mm (D) x 44 mm (H) 8.05 lbs. (3.65 kg) 115V/230V 50/60 Hz 0.
30 USTIP U SER G UIDE Cable Specifications Category 5e UTP cable to connect to network. Paragon download cable to connect from Admin Port to local PC port. KVM Switch Specifications Supports KVM switches utilizing an On-Screen Us er Interface, including Raritan’s Paragon, Z- Series, MasterConsole MX 4 , and MasterConsole II product lines.
A PPENDIX B: F REQUENTLY A SKED Q UESTIONS 31 Appendix B: Frequent ly Asked Questions Q UESTION : A NSWER : What is USTIP? USTIP is the easiest, fastest, most reliable way to remotely acces s and manage multiple servers connected to a Paragon II - no matter where you are or where your servers are located.
32 USTIP U SER G UIDE Q UESTION : A NSWER : Is USTIP easy to install? USTIP is very easy to install. Just connect it to a user port on an existing KVM configuration and assign an IP address and/or telephone number for modem access. How Is USTIP administration carried out? Administrators access USTIP through a connected USTIP Admin Console.
A PPENDIX B: F REQUENTLY A SKED Q UESTIONS 33 Q UESTION : A NSWER : Can I use USTIP in a VPN? Yes. USTIP fits into most an y network configuration utilizing standard TCP/IP. The network administrator sim ply adds USTIP as a node on the network via the USTIP Admin Console.
34 USTIP U SER G UIDE.
A PPENDIX C: T ROUBLESHOOTING 35 Appendix C: Troubleshooting Problems and Suggested Solutions R EMOTE C ONNECTION P ROBLEM S OLUTION I cannot connect to USTIP via dial up modem. Ensure that you have specifi ed the modem device for yo ur Remote PC in the Add Connection Win dow (Dial-up type connecti on) modem field.
36 USTIP U SER G UIDE D IRECT A NALOG U SER C ONSOLE P ROBLEM S OLUTION The Direct Analog User Console does not function. Make sure the KVM switch is f unctioning properly. Make sure that USTIP is turned on. USTIP must be powered on for the Direct Analog User Console to function.
A PPENDIX C: T ROUBLESHOOTING 37 K EYBOARD P ROBLEM S OLUTION USTIP is not accepting keyboard commands from the Remote PC. The USTIP window of TRC must be the active window for proper keyboard control. Ensure the window in which you are typing is active.
38 USTIP U SER G UIDE KVM O N -S CREEN U SER I NTERFACE (OSUI) P ROBLEM S OLUTION Log out of KVM on disconnect is set to YES in the Security Configuration screen, but USTIP is not logging out of the KVM upon remote user disconnection.
A PPENDIX C: T ROUBLESHOOTING 39 M OUSE P ROBLEM S OLUTION USTIP is not accepting my mouse. USTIP will not support a serial type mouse or non- standard mouse drivers.
40 USTIP U SER G UIDE T ARGET S ERVER P ROBLEM S OLUTION When I reboot a Target Server through USTIP, from a Rem ote PC, I cannot access the Target Server’s BIOS.
P ARAGON II FAQ S O NLINE 41 USTIP P ROBLEM S OLUTION I cannot power down USTIP. The main power switch for USTIP is on the back of the unit. To turn off USTIP hold the power key down f or a few seconds. To turn USTIP back on, press the power button again.
42 USTIP U SER G UIDE W EB B ROWSER P ROBLEMS S OLUTION I cannot connect to USTIP via Web Browser. Re-check the IP settings for USTIP from the USTIP Admin Console or remote Admin Console window.
P ARAGON II FAQ S O NLINE 43 E RROR C ODE ( LAST 4 DIGITS ) M EANING R ECOMMENDATION 0007 – 0008 Memory allocation error. Reboot USTIP. Make sure the BIOS memory test recognizes at least 64MB of RAM. If the problem persists, restore the software and file system from the Recovery CD-ROM.
44 USTIP U SER G UIDE E RROR C ODE ( LAST 4 DIGITS ) M EANING R ECOMMENDATION 001C Error occurred while initializing the TCP read socket. Reboot USTIP. Make sure the BIOS memory test recognizes at least 64MB of RAM. If the problem persists, restore the software and file system from the Recovery CD-ROM.
P ARAGON II FAQ S O NLINE 45 E RROR C ODE ( LAST 4 DIGITS ) M EANING R ECOMMENDATION system from the Recovery CD-ROM. 003A – 003F Resource allocation error. Reboot USTIP. Make sure the BIOS memory test recognizes at least 64MB of RAM. If the problem persists, restore the software and file system from the Recovery CD-ROM.
World Headquarters Raritan Computer, Inc. 400 Cottontail Lane Somerset, NJ 08873 USA Tel. (732) 764-8886 Fax. (732) 764-8887 Email: sales@raritan.com www.raritan.com Rari t an OEM Di visi o n Peppercon USA, Inc. 111 E. Wacker Dr, Suite 2626 Chicago, IL 60601 Tel.
Een belangrijk punt na aankoop van elk apparaat Raritan P2-USTIP1 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Raritan P2-USTIP1 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Raritan P2-USTIP1 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Raritan P2-USTIP1 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Raritan P2-USTIP1 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Raritan P2-USTIP1 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Raritan P2-USTIP1 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Raritan P2-USTIP1 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
