Gebruiksaanwijzing /service van het product 54301 van de fabrikant RayTek
Ga naar pagina of 93
MI Miniature Infrared Sensor Operating Instructions Rev. E 10/2004 54301 Noncont act T emper atur e M easur emen t.
Declaratio n of Conformity for the European Communit y This instrument conforms to: EMC: IEC/EN 61326 ‐ 1 Safety: EN 61010 ‐.
Contacts Europe Raytek GmbH Berlin, Germany Tel: +49 30 478008 – 0 +49 30 478008 – 400 (Ventes) Fax: +49 30 4710251 raytek@raytek.
W ARRANTY The manufacturer warrants this ins trument to be free from defects in material and workmanshi p under normal use and service for the period of two years fr om date of purchase.
T ABLE OF C ONTENTS 1 SAFETY INSTRUCTIONS............................................ 1 2 DESCRIPTION ............................................................... 3 3 TECHNICAL DATA ..............................
5.3.1 Signal Output ................................................... 19 5.3.2 Head Ambient Temp. / Alarm Out p ut ............. 20 5.3.3 Thermo couple Output ....................................... 22 5.4 I NPUTS FTC.
8 ACCESSORIES ............................................................. 46 8.1 O VERVIEW ................................................................ 46 8.2 A DJUSTABLE M OUNTING B RACKET ......................... 48 8.
11.6.2 Analog Output, Scaling ................................. 72 11.6.3 Alarm Output................................................. 72 11.6.4 Factory default values ..................................... 72 11.6.
Safety Instru ctions 1 Safety Instructions This document contains important infor mation, which should be kept at all times with the instrumen t during its operation al life.
Safety Instru ctions Operating Ins tructions The following symbols are used to highlight essential safe ty information in the operation in structions: Helpful information regarding the optimal use of the instrume nt.
Description 2 Description The miniature infrared sensor s MI are noncontact infrared temperature me asurement syste ms.
Technical Data 3 Technical Data 3.1 Measur ement Specific ations Temperature Range LT ‐ 40 to 600°C ( ‐ 40 to 1112°F) for J.
Technical Data Temperature Resolution LT ± 0.1 K (± 0.2°F)* ± 0.25 K (± 0.5°F)** At ambient temperature 23°C ± .
Technical Data 3.2 Optica l Specifications Optical Resolution D:S MID, MIC 2:1 or 10:1 MIH 10:1 At 90% energy in minimum and distanc e 400 mm (15.7 in.
Technical Data 3.3 Electric al Specifications Power Supply Voltage 12 to 24 VDC Current 100 mA Outputs 1. Output (OUT) 0 to 20 mA, or 4 to 20 mA, or 0 to 5 V, or Thermocouple (J or K) 2.
Technical Data 3.4 Environmental Specif ications Ambient Temperature MIH sensing head 0 to 180°C (32 to 356°F) MIC sensing hea.
Technical Data 3.5 Dimensions Standard cable length 1 m (3 ft.) MID/MIC: Ø 5 mm (0.2 in) MIH: Ø 3 mm (0.12 in) Figure 2: Dim ensions of Se nsing Head 2 mounting holes, Ø 4.
Technical Data 3.6 Scope of Delivery The scope of delivery includes the following: • Sensing head • 1 m head cable • M.
Basics 4 Basics 4.1 Measur ement of Infrar ed Temperature All surfaces emit infrared radiation The in tensity of this infrared radiation changes according to the temperatur e of the object.
Basics 4.2 Emissivity of Target Object To determine the emissivity of the target object refer to section 12.
Basics 4.5 Electric al Interference To minimize electrical or electromagnetic interference or “noise” be aware of the following: .
Installation 5 Installation 5.1 Positionin g Sensor location depends on the application. Before deciding on a location, you need .
Installation best good incorrect Sensor Target greater than spot size Target equal to spot size Target smaller than spot size Figure 4: Proper Sensor Placement 5.
Installation 5.2.2 Cable Preparati o ns You need to connect the power supply (12 to 24 VDC) and the signal output wires. Use only cable with outside diameter from 4 to 6 mm (0.
Installation Preinstalled cable to sensor head Output signal and p ower connector bloc k Cable that has to be installed b y the user Figure 6: Connecting of Cables to the Electronic Box 5.
Installation 5.3 Outputs Electronic Box 4 to 20 m A 0 to 20 m A J or K 0 to 5 V Signal Output Head Ambient Temp. or Alarm 0 to 5 V 12 to 24 VDC Power Figure 7: Signal Outpu.
Installation 5.3.1 Signal Output Power + Power – Signal Ground Signal Out p ut Figure 8: Wiring of the Signal Output (mA or V) The signal output can be configured either as current or as voltage output.
Installation 5.3.2 Head Ambient Temp. / Alar m Output This output can be configured either as output for the head ambient temperature (default configuration) or as an alarm output.
Installation You may use a solid state relay for the alarm output. The outp ut is short circuit resistant with 100 Ω out put imped ance.
Installation 5.3.3 Thermocouple Output If you are using a J ‐ or K ‐ thermocouple you must inst all a compensation cable.
Installation 5.4 Inputs FTC The three inputs FTC1, FTC2, and FTC3 are used for the external control of the unit.
Installation 5.4.1 Emissivity Setting (analog contr olled) The input FTC1 can be configured to accept an analog voltage signal (0 to 5 VDC) to provide real time emissivi ty setting.
Installation 5.4.2 Emissivity Setting (digital controlle d) The sensor’s electronics contains a table with 8 pre ‐ installed settings for emissivity.
Installation 5.4.3 Ambient Background Temperature Compensatio n The sensor is capable of improving the accuracy of target temperature me asurements by taking into account the ambient or background temperature.
Installation • Ambient background temperature compensation from a second temperature sensor (infrared or contact te mperature sensor) ensures extremely accurate results.
Installation 5.4.4 Trigger and Hold Function The FTC3 input can be used as ex ternal trigger in conjunction with the software trigger mode setting “Trigger” or “Hold”.
Installation Hold: This mode acts as external generated hold function. A transition at the input FTC3 from logical high level to ward logical low level will transfer the current temperature toward the output.
Installation 5.5 Connec ting to the PC via RS232 The RS232 interface comes with each model. Connect a single unit with a RS232 COM port by using the connection kit RAYMINC ON.
Installation 5.6 Installin g of Multiple Sensors vi a RS485 The distance between the sensor and a computer can be up to 1200 m (4000 ft.) via RS485 interface.
Installation For an installation of two or more sensor s in a RS485 network, each sensor is wired parallel to the othe rs. You may connec t up to 32 units.
Installation Go to the menu <Setup> <Sensor Setup>, and then select the register <Advanced Setup>. Use <Polling Address> for selecting the requested address.
Operation 6 Operation Once you have the sensor positioned and connected properly, the system is ready for continuous operation.
Operation 6.2 Setting of Modes You can easily determine the unit’s mode or parameter by doing the following: Press the <Mode> butto n until the symbol for the actual set mode appears in the display, e.
Operation Display Mode Range C Target Temperature* (effected by signal processing) not adjustable A Head Ambient Temper ature not adjustable T Target Temperature (not effected by signal pr.
Operation 6.3 Setting the Output Jumper In addition to the set mode in the unit, see section 6.
Operation 6.4 Post Processing 6.4.1 Averaging Averaging is used to smooth the output signal. The signal is smoothed depending .
Operation object), the output signal reaches only 90% magnitude of the actual object temperatur e after the defined average time.
Operation 6.4.2 Peak Hold The output signal follows the object temperature until a maximum is found.
Operation 6.4.3 Valley Hold The output signal follows the object temper ature until a mini mum is found.
Operation 6.4.4 Advanced Peak Hold This functi on searches the sensor signal for a local maximu m (peak) and writes this value to the output until a new local maxi mum is found.
Operation 6.4.5 Advanced Valley Hold This function works similar to the advanced peak hold function, except it will search the signal for a local minimum. 6.
Operation 6.5 Factory Defa ults For activating the unit’ s factory default value s press the <Mode/Up> buttons on the electronic board simultaneously. The factory default values are to be found in section 11 .
Options 7 Options Options are items tha t are factory installed and must be specified at time of order. The following are available: • Longer cable lengths: 3 m / 9.
Accessories 8 Accessories 8.1 Overvi ew A full range of accessories for various applicatio ns and industrial environme nts are available.
Accessories Sensing Head 2:1 Adjustable Bracket Electronic Box Sensing Head 10:1 Fixed Bracket Figure 30: Standard Mounting Accessories MID 47 .
Accessories 8.2 Adjustable Mountin g Bracket Figure 31: Adjustable Mo unting Bracket (XXXMIACAB) 48 MID .
Accessories 8.3 Fixed Mounting Bracket Figure 32: Fixed Mounting Bracket (XXXMIACFB) MID 49 .
Accessories 8.4 Air Purging Ja cket The air purge jacket is used to keep dust, mo isture, airborne particles, and vapors away from the sensing he ad. Clea n, oil free air is recommended.
Accessories Figure 34: Mounting the Air Purge Jacket 1. Remove the sensor (1) and cable from the electro nic box by disconnecting the wires from the electronic box.
Accessories 8.5 Air Co oling System The sensing head can operate in ambient temperatures up to 200°C (392°F) with the air ‐ cooling system. The air ‐ cooling sy stem comes with a T ‐ adapter including 0.
Accessories Air Flow: 60 l / min (2.1 cubic feet per minute) 50 l / min (1.8 cfm) 40 l / min (1.4 cfm) Hose Length Figure 37: Maximum Ambient Temperature depending on .
Accessories Figure 38: Air Cooling System: Purgi ng Jacket The Air Cooling Sys tem consists of: (1) sensing head (2) inner .
Accessories Figure 39: Air Cooling System: T ‐ Adapter MID 55 .
Accessories Hose: inner Ø : 9 mm (0.35 in) outer Ø : 12 mm (0.47 in) Figure 40: Dimensions of Air Cooling System 56 MID .
Accessories 8.6 Right Angle Mirror The right angle mirror comes in two different versions: XXXMIACRAJ right angle mirror as .
Accessories 8.7 Box Lid Figure 43: Box Lid with Vi ew Port for Post Ins tallations (XXXMIACV) 58 MID .
Accessories 8.8 Protective Window The protective wind ow can be used to protect the sensing head from dust and other contamin ation. This should be applied especially for sensors without a lens.
Maintenance 9 Maintenance Our sales representatives and cust omer service are always at your disposal for questi ons regarding application assistance, calibration, repair, and solutions to specific problems.
Maintenance 9.2 Fail ‐ Safe Operat ion The Fail ‐ Safe system is designed to alert the operator and provide a safe output in case of an y syste m failure.
Maintenance Error Codes via RS232/485 Output Error Code Description T------ Invalid temperature reading T>>>>>> Temperature over range T<<<<<< T.
Maintenance 9.3 Sensing Head Exchange MIH sensing heads and electronic b oxes can not be interchanged with MID/MIC sens ing head.
Software 10 Software For use with RS232 or RS485 models, DataTemp MultiDrop softwar e allows access to the extended digital features of the MID with an easy ‐ to ‐ use interface.
Programming Guide 11 Programming Guide This section explains th e sensor’s communication protocol. A protocol is the set of commands that define all possible communications with the sensor.
Programming Guide 11.1 Transf er Modes The unit’s serial interface is either RS232 or RS485, depending on the model.
Programming Guide 11.2 Gener a l Command Structure Requesting a paramete r (Poll Mode) ?ECR “?“ is the command for “Request“.
Programming Guide After switc hing the power to “ON“, the de vice is sending a notification: #XICRLF “#“ is the paramete.
Programming Guide 11.4 Device Setup 11.4.1 Temperat ure Calcula tion U=C unit for the tempe rature value E=0.950 Emissivity setting (Cau tion: according to the sett ings for “ES”, see section 11.
Programming Guide There are eight ent ries possible for emissivity setting (1) and a related set point (threshold) (2).
Programming Guide 11.4.3 Post Processing The following parameters can be set to deter mine the post processing mode, see section 6.4 Post Pro cessing on page 38.
Programming Guide 11.6 Device Control 11.6.1 Output for the Tar get Temperature The signal output can be set to 4 – 20 mA, 0 – 20 mA or mV.
Programming Guide XF factory default values will be set 11.6.5 Lock Mode The access to the unit is possible via serial interface (software) and via the direct user input (mode butto ns, LCD display).
Programming Guide AC=2 compensation with an extern al voltage signa l at the analog input FTC2 (0 V – 5V corresponds to .
Programming Guide 11.7 Multip le Units (Multidrop Mode, RS485) Up to 32 units can be connected within a RS485 networ k, see section 5.6 Installing of Mult iple Sensors via RS485 on page 31.
Programming Guide 11.8 Command Set Description Char Format P B S Legal values Factory default LCD Poll parameter ? ?X/?XX * ?T Set parameter = X/XX= ... * E=0.85 Set parameter without EEPROM storage # X/XX# * E#0.85 Multidrop addressing 001?E * * answer: 001!E0.
Programming Guide Description Char Format P B S Legal values Factory default LCD Source: emissivity / setpoint for alarm output ES X * * 1=constant number (E=0.950) E=external analogous input FTC1 D= E/XS digital selected FTC1-3 1 Presel. emissivity value EV n.
Programming Guide Description Char Format P B S Legal values Factory default LCD Presel. setpoint / relay function SV nnn.n (1) Target temperature T nnn.
Programming Guide (3) $ = UTQE (4) setting average / peak / valley / advanced hold cancels all other hold modes (6) .
Appendix 12 Appendix 12.1 Determ ination of Emissivity Emissivity is a measure of an object’s ability to absorb and emit infrared energy. It can have a value between 0 and 1.
Appendix 12.2 Typical Emissivity Va lues The following table provides a brief reference guide for determining emissivity and can be used when one of the above methods is not practical.
Appendix M ETALS Material Emissivity 3.9 µm 5 µm 8 – 14 µm Aluminum Unoxidized 0.02-0.2 0.02-0.2 0.02-0.1 Oxidized 0.2-0.4 0.2-0.4 0.2-0.4 Alloy A3003, Oxidized 0.4 0.4 0.3 Roughened 0.1-0.4 0.1-0.4 0.1-0.3 Polished 0.02-0.1 0.02-0.1 0.02-0.1 Brass Polished 0.
Appendix Polished 0.05-0.2 0.05-0.2 0.05-0.1 Rough 0.4 0.4 0. 4 Oxidized 0.2-0.7 0.2-0.7 0.2-0.6 Magnesium 0.03-0.15 0.03-0.15 0.02-0.1 Mercury 0.05-0.15 0.05-0.15 0.05-0.15 Molybdenum Oxidized 0.3-0.7 0.3-0.7 0.2-0.6 Unoxidized 0.1-0.15 0.1-0.15 0.
Appendix N ON -M ETALS Material Emissivity 3.9 µm 5 µm 8 – 14 µm Asbestos 0.9 0.95 Asphalt 0.95 0.95 Basalt 0.7 0.7 Carbon Unoxidized 0.8-0.9 0.8-0.9 Graphite 0.7-0.9 0.7-0.8 Carborundum 0.9 0.9 Ceramic 0.8-0.95 0.95 Clay 0.85-0.95 0.95 Concrete 0.
Index Index Accessories 46 Accuracy 4 Air pressure 12 Air Purge 46 Air Purge Jacket 12 Ambient Temperature 12 Average 60 Control Panel 34, 59 Emissivity 5, 11, 12, 60, 80, 81, 83, 84 Loop impe.
Een belangrijk punt na aankoop van elk apparaat RayTek 54301 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen RayTek 54301 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens RayTek 54301 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding RayTek 54301 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over RayTek 54301 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van RayTek 54301 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de RayTek 54301 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met RayTek 54301 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
